INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
CASE ASSEMBLY (48951-11)
IR 1702-A727
IR 1702-A727
Hammer Assembly Service Part for Ingersoll Rand Impact Wrench
For Use With- 211
$250.00
LEVER THROTTLE SCALER
IR 172L
IR 172L
Air Chisel Scaler, 5500 BPM, 9/16" Stroke
At 5,500 blows per minute, this lever-operated chisel scaler is not only fast, but extremely durable and efficient.Features And Benefits
- Easy Adjustment: The adjustable bayonet-type needle housing lock allows for easy adjustment without special tools.
- Durability: These scalers feature a rubber faced throttle valve to ensure positive sealing of internal components, along with a strengthened head block that will hold up in tough conditions.
- Comfort: Compact, well balanced and low vibration maximize operators comfort
Includes: Bare Tool
Product Application and Uses: Remove Paint, Rust, Dirt, Weld Slags
Actuation/Throttle Type/Switch Type: Lever
Air Consumption @ Load (cfm): 12
Air Consumption @ Load (l/min): 340
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 5500
Bore Diameter (in): 0.94
Color: Silver
Configuration/Handle Type: Straight
Duty Rating: Heavy Duty
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Non Sparking: No
Power Source: Air Powered
Product Length (in): 12.7
Product Width (in): 6.2
Product Height (in): 2.2
Shank SIze (in): .5
Shank Type: Ingersoll Rand Shank
Sound Pressure/Power Db(A): 107.5 / 118.5
Stroke Length (in): 0.56
Vibration Level (m/s2): 11.6
Warranty: 1-year
Similar IR
- 182L
- 182K1
- 172LNA1
$420.90
TOOL BOOT
IR 2015-BOOT
IR 2015-BOOT
Protective Boot for 2015MAX and 2025MAX Series Impact Wrenches
Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.Features And Benefits
- Protects surrounding surfaces from scratches, nicks ect.
- Protects tool from damage if dropped.
- Adds further protection from unwanted contaminates that can affect tool performance.
Color: Grey
For Use With
- 2015MAX
- 2025MAX
$38.00
3/8" ANGLE IMPACT
IR 2015MAX
IR 2015MAX
3/8" Air Impact Wrench, 180 ft-lb Torque, Friction Ring Retainer, Right Angle
This revolutionary product is unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.Features And Benefits
- Max Power: With 180 ft-lbs of max torque and 9000 rpm, this tool offers more than twice the power of the leading competitor's ratchet.
- Max Control: A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control.
- Max Access: A head height of under 2" and reactionless torque allow you to safely use this powerful tool in tight spaces.
- Feather touch trigger, 2-position forward power regulator, forward/reverse ring
- Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench.
- Ergonomically sound rear exhaust system.
- Offers the same reach as a ratchet.
- Optimized for the vehicle repair industry, body shops, and MRO.
- 1-year warranty.
Product Application and Uses: Designed to remove and install threaded fasteners. Optimized for the vehicle repair industry, body shops, and MRO
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 19
Air Consumption @ Load (l/min): 538
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Blows per Min: 2100
Color: Grey
Configuration/Handle Type: Right Angle
Drive Size (in): 3/8
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 94.1 / 105.1
Hammer Case: Aluminum
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Single Hammer
Impacting Sound Pressure/Power Db(A): 96.6 / 107.6
Max Bolt Diameter (in): 0.4375
Max Free Speed (rpm): 9000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 180
Max Torque (in-lb): 2160
Max Torque (nm): 244
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 2
Power Source: Air Powered
Product Length (in): 13.1
Product Width (in): 2.2
Product Height (in): 3.1
Product Weight (lb): 3.4
Recommended Forward Torque Range (ft-lb): 45-140
Recommended Forward Torque Range (in-lb): 540-1682
Recommended Forward Torque Range (nm): 61-190
Recommended Reverse Torque (ft-lb): 45-160
Recommended Reverse Torque (nm): 61-217
Retainer Type: Friction Ring
Side to Center Distance (in): 1.1
Side to Center Distance (mm): 28
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 17.4
Warranty: 2-year
Similar IR
- 2025MAX
$444.60
ANVIL ASSEMBLY
IR 2112-A726
IR 2112-A726
Anvil Assembly Replacement Part for Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact Wrench
Product Application and Uses: For use with Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact WrenchesFor Use With
- 2125QTIMAX
- 2125QTIMAX-AP
$68.00
3/8in Impact Wrench
IR 2115PTIMAX
IR 2115PTIMAX
3/8" Air Impact Wrench, 300 ft-lb Torque, Titanium Hammercase, Pin Retainer, Pistol
The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.Features And Benefits
- Durable: With a titanium hammer case and composite housing, this wrench can withstand anything, including repeated drops and harsh environments. In fact, we provide a 2-year warranty to prove it.
- Versatile: This tool is so versatile, it can be used in just about any market.
- Reliable This wrench has been tested and is guaranteed to last. It’ll deliver the same level of power every time.
- Easier access to grease fitting – for quicker maintenance and less downtime
- Enhanced socket retention
- 7-vane Motor delivers added power with less weight
- Finely tuned twin hammer impact mechanism and motor deliver more torque, durability, and efficiency
- Feather-touch trigger provides maximum control of this air impact wrench
- Anodized end plate for enhanced durability
- Pin anvil ensures positive socket retention
- Optimized for the vehicle repair industry, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, and construction
- Patented one-hand forward/reverse control for easy operation
- Optimized air flow for maximized performance when using this pneumatic impact wrench
Includes: Bare Tool
Product Application and Uses: General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 17
Air Consumption @ Load (l/min): 481
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Blows per Min: 1500
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 3/8
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 89.7 / 100.7
Hammer Case: Titanium
Handle Material: Composite
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 93.2 / 104.2
Max Bolt Diameter (in): 7/16
Max Free Speed (rpm): 15000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 300
Max Torque (in-lb): 3602
Max Torque (nm): 407
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 4
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 120.9
Product Length (in): 5.9
Product Width (in): 2.2
Product Height (in): 6.7
Product Weight (lb): 2.48
Recommended Forward Torque Range (ft-lb): 250
Recommended Forward Torque Range (in-lb): 3000
Recommended Forward Torque Range (nm): 339
Retainer Type: Pin Detent
Side to Center Distance (in): 1.1
Side to Center Distance (mm): 28
Special Features: Titanium hammercase, 2-year Max warranty
Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 7.8
Warranty: 2-year
Similar IR
- 2115TIMAX
$396.75
TUNE-UP KIT
IR 2175MAX-TK1
IR 2175MAX-TK1
Tune-up Kit for Ingersoll Rand 2175 Series Air Impact Wrench
Includes: inlet parts kit, O-rings, springs, dentent pin, gaskets, cylinder dowl, bearings and vane pack.For Use With
- 2175MAX
- 2175MAX-6
$56.00
HAMMER CASE (1720B)
IR 261B-A727
IR 261B-A727
Hammer Case for Ingersoll Rand 261, 271 Series Impact Wrench
For Use With- 261
- 261-3
- 261-6
- 271
$231.00
RETAINER
IR 341SR-A124
IR 341SR-A124
Retainer Replacement Part for Ingersoll Rand 341, 441 Series Air Tamper
$133.00
Dead Handle
IR 3940-48
IR 3940-48
Dead Handle for Ingersoll Rand 3940, 3942, 3955 Series Impact Wrench
$120.00
IMPACTOOL
IR 3940B2TI
IR 3940B2TI
1" Air Impact Wrench, Super Duty, 2750 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
With a titanium hammer case, bronze end plates and torque up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: High torque output of 2750 ft-lbs and 800 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses: Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 64
Average Air Consumption (l/min): 1812
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2750
Max Torque (in-lb): 33004
Max Torque (nm): 3729
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
Product Length (in): 13.5
Product Weight (lb): 21.2
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 500-1800
Recommended Forward Torque Range (in-lb): 6001-21596
Recommended Forward Torque Range (nm): 678-2440
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 13.1
Vibration Uncertainy K* (m/s2): 1.6
Warranty: 1-year
Similar IR
- 3940A2TI
$4,450.50
Body (48951-136)
IR 402-565
IR 402-565
Inlet Bushing for Ingersoll Rand 231, 211, 212, 1702, 215G Impact Wrench
$21.00
AIR CARE KIT
IR 67-LBK1
IR 67-LBK1
Air Care Lubrication Kit for Ingersoll Rand Tools, includes 10Z4 Oil, 67 Grease and Grease Gun
#67 Grease Lubrication Kit, #10 OilFeatures And Benefits
- It goes without saying that proper lubrication of any tool is essential if you want the tool to last. By lubricating your air tools, you’ll prolong the life of tool motors, mechanisms, gearing, and other vital parts. Ingersoll Rand offers a complete line of specialized oils and greases that are engineered specifically for use with our air tools.
Includes: 4oz. 67-4T Heavy Duty Impact Wrench Grease, 4oz.10Z4 Air Tool Oil, Grease Gun
Product Application and Uses: For use with Ingersoll Rand angle grinders
Product Length (in): 1.57
Product Width (in): 4
Product Height (in): 7.25
Product Weight (lb): 0.79
Similar IR
- 105-LBK1
- 10Z4
- 10P
- 10G
- 67-4T
$57.00
MOTOR -- MULTI-VANE
IR 92RA005
IR 92RA005
Spur Gear Air Motor, 1-1/2" Keyed Shaft, 1390 RPM, 8.15 HP, 102 NM, Reversible
Air Consumption at Max HP (scfm): 230Air Inlet: 1" NPT
Air Pressure (psi): 90
Drive Size (in): 1-1/2
Drive Type: Round Keyed
Exhaust Location: Side
Finish: Paint, Yellow
Gear Reduction: Single
Gear Train: Spur Gear
Housing Material: Aluminum
Max Free Speed (rpm): 1390
Max Pressure (bar): 6.2
Max Torque (ft-lb): 75
Max Torque (in-lb): 903
Max Torque (nm): 102
Motor: Rotary Vane
Motor: Spur Gear
Mounting Type: Foot and Face
Power Source: Air Powered
Product Weight (lb): 46
Rated Power (hp): 8.15
Rated Power (kW): 6.08
Reversible: Reversible
Speed at Max Power (rpm): 910
Starting Torque (ft-lb): 56
Starting Torque (nm): 75.9
Warranty: 1-year
$7,221.00
HORIZONTAL GRINDER
IR 99HL60H106
IR 99HL60H106
Extended Air Grinder, 6" Type 1 Wheel, 6,000 RPM, 3HP, 5/8 in-11 Thread, Side Exhaust
The 99 Series Type 1 Grinder is designed for the toughest jobs. With a patented motor controller that maximizes material-removal rate and prevents over speeding, this grinder is both safe to use and powerful.Features And Benefits
- Safety: A lock-out lever and guard safety provide extra safety measures and increased operator comfort.
- Cleaner Workspaces: Compatible with piped-away exhaust kits to keep your worksite free from exhaust air.
- Durability: The 99 Series Type 1 Grinder’s built-in mist lubricator automatically oils the motor to keep your grinder in top condition.
- 1-year warranty.
Includes: Tools, Large Wrench, Small Wrench
Product Application and Uses: Automotive, general assembly, metal fabrication, plant maintenance, production prep, aerospace, shipbuilding
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 84
Air Consumption @ Load (l/min): 2379
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Bearing Type: Ball Bearing
Configuration/Handle Type: Straight
Duty Rating: Industrial Duty
Exhaust Location: Side
Grinder Type: Horizontal Grinder
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 5.91
Housing Material: Steel
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Power Source: Air Powered
Product Length (in): 20.5
Product Weight (lb): 13.5
Rated Power (hp): 3
Sound Pressure/Power Db(A): 82.8/93.8
Vibration Level (m/s2): <2.5
Warranty: 1-year
Wheel Diameter (in): 6
Wheel Thickness (in): 1
Wheel Type: Type 1
Similar IR
- 99HL60H108
$1,925.10
LOCK CLIP FOR BARR GRVD, QTY 1
IR 9RB-207
IR 9RB-207
Lock Clip for Ingersoll Rand Riveters
Product Application and Uses: For use with Ingersoll Rand 9001 and 11001 RivetersFor Use With
- 11001
- 9001
$79.00
DRIVE ADAPTER - 1/2" FEMALE TO 3/4" MALE
IR A4F6M
IR A4F6M
DRIVE ADAPTER - 1/2" FEMALE TO 3/4" MALE
$37.00
DRIVE ADAPTER - 3/4" FEMALE TO 1" MALE
IR A6F8M
IR A6F8M
DRIVE ADAPTER - 3/4" FEMALE TO 1" MALE
$51.00
