INGERSOLL-RAND IR TOOL S12880

IR S68M60L

SOCKET, DEEP, 1" DRIVE, 60 MM

IR S68M80

SOCKET, STANDARD, 1" DRIVE, 80 MM

IR S68M70

SOCKET, STANDARD, 1" DRIVE, 70 MM

IR S68M80L

SOCKET, DEEP, 1" DRIVE, 80 MM

IR S68M85L

SOCKET, DEEP, 1" DRIVE, 85 MM

IR S68M75

SOCKET, STANDARD, 1" DRIVE, 75 MM

IR S68M90

SOCKET, STANDARD, 1" DRIVE, 90 MM

IR S68M95

SOCKET, STANDARD, 1" DRIVE, 95 MM

IR S68M85

SOCKET, STANDARD, 1" DRIVE, 85 MM

IR S7928-5EP

WASHER, PLATED

IR S68M90L

SOCKET, DEEP, 1" DRIVE, 90 MM

IR S80-234

SCREW

IR S80-268

SCREW

IR S7928-5

SPACER WASHER

IR S80-38

SEAL

IR S80-53

ROTOR

IR S80-11

END PLATE

IR S80-A28

SEAL ASSEMBLY

IR S80-28

SEAL

IR SA-1200-301

NAMEPLATE

IR S80-55

PLATE

IR SA-1200-99

LABEL, WARNING INFORM

IR SA270-A

ARM, SECONARDY, SINGLE

IR S80-A524

CONTROLLER ASSEMBLY

IR SA270-B

ARM, SECONDARY, LOWER

IR SEC-40005-P14

3 T CHAIN CONTAINER

IR SA-1200-A40

ASSEMBLY, HOUSING

IR SG021B-9-Q-EU

SCREWDRIVER

IR SCR3-KFLGA

SHAFT KIT

IR SG030-K12

FLANGE KIT

IR SG050-K12

FLANGE KIT

IR SG021B-4-Q

SCREWDRIVER

IR SHCS8-1.25X20

SCREW

IR SG023B-9-Q-EU

SCREWDRIVER

IR SHCSN5-18-4

CAP SCREW

IR SK2M12

12 PIECE, 1/4" DRIVE METRIC SOCKET SET

IR SHCS8-1.0-25

SCREW

IR SK3H8LN

3/8" Drive Hex Deep SAE Impact Socket Set, 8-Piece

Includes: 8 sockets (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4") and blow-molded case
Drive Size (in): 3/8
Drive Type: Square
Finish: Chrome-molybdenum steel
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

Supersedes

• SK3H8L

IR SK3M10

3/8" Drive Hex Universal Metric Impact Socket Set, 10-Piece

Warranty: Lifetime Limited

For Use With

• W3131
• W3131-K12-AR
• W3131-K12-BR
• W3131-K22
• W3131-K22-AP1
• W3131-K22-CN
• W3131-K22-EU
• W3131-K22-IN
• W3131-K22-JP
• W3131-K22-KR
• W3151
• W3151-K12-AR
• W3151-K12-BR
• W3151-K22
• W3151-K22-AP1
• W3151-K22-CN
• W3151-K22-EU
• W3151-K22-IN
• W3151-K22-JP
• W3151-K22-KR

IR SK2C10N

1/4" Drive Hex Universal Metric & SAE Impact Socket Set, 10-Piece

Includes: 10 sockets (3/16", 1/4", 3/8", 1/2", 9/16", 4mm, 6mm, 9mm, 12mm, 14mm) and blow-molded case
Drive Size (in): 1/4
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Measurement Type: Metric
Warranty: Lifetime Limited

IR SK3M8N

3/8" Drive Hex Metric Socket Set, 8-Piece

Includes: 8 sockets (9mm, 10mm, 11mm, 13mm, 14mm, 15mm, 17mm, 19mm)
Drive Size (in): 3/8
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Measurement Type: Metric
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

For Use With

• 15QMAX
• 2115PTIMAX
• 2115QTIMAX
• 2115QTIMAX-AP
• 2115QXPA
• 2115TIMAX
• 2115TIMAX-AP
• 216B

IR SK3M7UN

3/8" Drive Hex Universal Metric Impact Socket Set, 7-Piece

Includes: 7 sockets (10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm) and blow-molded case
Drive Size (in): 3/8
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

IR SK4C6L-PS1

1/2" DRIVE COMBO SAE AND METRIC POWER SOCKETS, 6 PIECE

IR SK4C10LN

1/2" Drive Hex Deep Metric & SAE Impact Socket Set, 10-Piece

Includes: 10 sockets (13mm, 16mm, 17mm, 19mm, 21mm, 1/2", 9/16", 5/8", 3/4", 7/8") and blow-molded case
Drive Size (in): 1/2
Drive Type: Square
Finish: Chrome-molybdenum steel
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Measurement Type: Metric
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

Supersedes

• SK4C10L

IR SK4H13LN

1/2" Drive Hex SAE Deep Socket Set, 13-Piece

Includes: 13 sockets (7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8', 1-1/4")
Drive Size (in): 1/2
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

For Use With

• 2100G
• 2317G
• 231G
• 236G
• EB2125X

IR SK4H5N

1/2" Drive Hex Deep SAE Impact Socket Set, 5-Piece

Includes: 5 sockets (3/4", 1/2", 9/16", 7/8", 5/8") and blow-molded case
Drive Size (in): 1/2
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

IR SK4H10LN

SOCKET 1/2IN DR DEEP SAE ST

IR SK4M14N

1/2" Drive Hex Universal Metric Impact Socket Set, 14-Piece

Includes: 14 sockets (10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm) and blow-molded case
Drive Size (in): 1/2
Drive Type: Square
Finish: Chrome-molybdenum steel
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Warranty: Lifetime Limited

For Use With

• W3151
• W3151-K12-AR
• W3151-K12-BR
• W3151-K22
• W3151-K22-AP1
• W3151-K22-CN
• W3151-K22-EU
• W3151-K22-IN
• W3151-K22-JP
• W3151-K22-KR

IR SK4M4LN

1/2" Drive Hex Deep Metric Tire Impact Socket Set, 4-Piece

Includes: 4 sockets (30mm, 32mm, 34mm, 36mm) and blow-molded case
Drive Size (in): 1/2
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

IR SK4M7UN

1/2" Drive Hex Metric Universal Impact Socket Set, 7-Piece

Includes: 7 sockets (13mm, 14mm, 15mm, 17mm, 19mm, 21mm, 22mm)
Drive Size (in): 1/2
Drive Type: Square
Finish: Chrome-molybdenum steel
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Warranty: Lifetime Limited

IR SK4H5-NB

CALL FOR SUPERCESSION

IR SK8M4LN

1" Drive Hex Universal Metric Impact Socket Set, 4-Piece

Includes: sockets and blow-molded case
Drive Size (in): 1
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Special Features: Schlagfestigkeit
Warranty: Lifetime Limited

For Use With

• 1712B2
• 2175MAX
• 2175MAX-6
• 271
• 2850MAX
• 2850MAX-6
• 285B
• 285B-6
• 285B-6-AP
• 2925P3TI
• 2940B2
• 295A
• 3940B2TI
• 3940B2TIEX
• 3940P2TI
• 3942B2TI
• 3942B2TIEX

IR SK4M3L

3 PC, 1/2" DRIVE METRIC INSULATED SOCKET SET

IR SK6H8N

3/4" Drive Hex SAE Universal Impact Socket Set, 8-Piece

Includes: 8 sockets (1", 1-1/16", 1-1/8", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2")
Drive Size (in): 3/4
Drive Type: Square
Finish: Chrome-molybdenum steel
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

For Use With

• 1720P1
• 1720P3
• 2145QIMAX-AP
• 2146Q1MAX
• 2146Q1MAX-3
• 2146Q1MAX-6
• 2146Q2MAX
• 2161XP
• 259
• 2925RBP1TI

IR SLE04A-10-A40

HOUSING ASSEMBLY

IR SLE15B-10-A40

HOUSING ASSEMBLY

IR SLE15B-20-301

NAMEPLATE

IR SLE26B-12-A40

HOUSING ASSEMBLY

IR SLE26B-3-A40

HOUSING ASSEMBLY

IR SLE10A-7-AC40

HOUSING ASSEMBLY

IR SLE26B-7-A40

HOUSING ASSEMBLY

IR SLE15B-20-A40

HOUSING ASSEMBLY

IR SLE26B-3-301

NAMEPLATE

IR SM1AMA-005-A

Vane Kit for Ingersoll Rand SM1AMA-A AIngersoll Rand Motor

Includes: (4) Vanes
Product Application and Uses: For use with SM1AMA-A Air Motor

For Use With

• SM1AMA-A

IR SM1AM-AG587

FOOT MOUNT

IR SM1AM-AG587-A

Mounting Foot for Ingersoll Rand SM1AMA-A AIngersoll Rand Motor

Includes: Mounting foot, (3) screws, (3) washers, (3) lock washers
Product Application and Uses: For use with SM1AMA-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM1AMA-A

IR SM1AMAL-005-A

Vane Kit for Ingersoll Rand SM1AMAL-A AIngersoll Rand Motor

Includes: (4) Rotor Blades
Product Application and Uses: For use with SM1AMAL-A Air Motor

For Use With

• SM1AMAL-A

IR SM1AMAL-AG587-A

Mounting Foot for Ingersoll Rand SM1AMAL-A AIngersoll Rand Motor

Includes: Mounting Foot Bracket, (3) Allen Bolts, (3) Spring Washers, (3) Plain Washers
Product Application and Uses: For use with SM1AMAL-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM1AMAL-A

IR SM1AMAL-A

Lube-Free Multi-Vane Air Motor, 3/8 Round Keyless, 0.45HP, 0.4ft-lb, 15000 RPM, Left-Hand Bias, Foot/Face/Hub Mount

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 20
Air Inlet: 1/8"-27 NPT
Air Pressure (psi): 90
Drive Length (in): 1.12
Drive Size (in): 3/8
Drive Type: Round Keyless
Finish: Paint, Gray
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Max Free Speed (rpm): 15000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 0.6
Max Torque (in-lb): 6.8
Max Torque (nm): 0.77
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: Foot or Face
Mounting Type: Hub
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 4.13
Product Width (in): 2.58
Product Height (in): 4.7
Product Weight (lb): 2.43
Rated Power (hp): 0.45
Rated Power (kW): 0.34
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 0.4
Starting Torque (nm): 0.55
Warranty: 1-year

IR SM1AMAL-TK1-A

Tune-Up Kit for Ingersoll Rand SM1AMAL-A Ingersoll Rand Motor

Includes: O-ring, (2) ball bearings, Oil Seal, (2) Shims, Rotor Blade Set, (2) Ejection Rings
Product Application and Uses: For use with SM1AMAL-A Air Motor

For Use With

• SM1AMAL-A

IR SM2AM-AH636-A

Mounting Foot for Ingersoll Rand SM2AMC-A AIngersoll Rand Motor

Includes: Mounting foot, (3) screws, (3) washers, (3) lock washers
Product Application and Uses: For use with SM2AMC-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM2AMC-A

IR SM2AMAN-005-A

Vane Kit for Ingersoll Rand SM2AMAN-A/SM2AMC-A AIngersoll Rand Motor

Includes: (4) Vanes
Product Application and Uses: For use with SM2AMAN-A and SM2AMC-A Air Motors

For Use With

• SM2AMAN-A
• SM2AMC-A

IR SM2AMC-A

Lube-Free Multi-Vane Air Motor, 1/2 Round Flat on Shaft, 0.9HP, 1.7ft-lb, 8000 RPM, Foot/Face Mount

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 30
Air Inlet: 3/8"-18 NPT
Air Pressure (psi): 90
Drive Length (in): 1.13
Drive Size (in): 1/2
Drive Type: Round Flat on Shaft
Finish: Paint, Gray
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Max Free Speed (rpm): 8000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2.3
Max Torque (in-lb): 27
Max Torque (nm): 3.1
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: Foot or Face
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 4.62
Product Width (in): 3.74
Product Height (in): 6.42
Product Weight (lb): 9.15
Rated Power (hp): 0.9
Rated Power (kW): 0.67
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 1.7
Starting Torque (nm): 2.3
Warranty: 1-year

Supersedes

• SM2AMC

IR SM450-203

SEAL

IR SM450B-607-1

SEAL

IR SM450-53/VRSM-1068

ROTOR

IR SM450B-607-2

SEAL

IR SM450B-G522

SEAL

IR SM450B-TK2

TUNE-UP KIT

IR SM451-606

RING

IR SM450LA-8

SHAFT

IR SM451-638

RACE

IR SM451-A379

BEARING

IR SM4AM-AH634

FOOT MOUNT

IR SM4AM-AH634-A

Mounting Foot for Ingersoll Rand SM4AMB-A AIngersoll Rand Motor

Includes: Mounting foot, (3) screws, (3) washers, (3) lock washers
Product Application and Uses: For use with SM4AMB-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM4AMB-A

IR SM4AMAN-TK1-A

Tune-Up Kit for Ingersoll Rand SM4AMAN-A AIngersoll Rand Motor

Includes: (4) Vanes, Rear Rotor Bearing, Front Rotor Bearing, Rotor Shaft Seal, (2) Gaskets, End Cap Gasket
Product Application and Uses: For use with SM4AMAN-A Air Motor

For Use With

• SM4AMAN-A

IR SM4AMAN-005-A

Vane Kit for Ingersoll Rand SM4AMAN-A/SM4AMB-A AIngersoll Rand Motor

Includes: (4) Vanes
Product Application and Uses: For use with SM4AMAN-A and SM4AMB-A Air Motors

For Use With

• SM4AMAN-A
• SM4AMB-A

IR SM4AMB-A

Lube-Free Multi-Vane Air Motor, 1/2 Round Woodruff Key, 1.5HP, 2.6ft-lb, 7900 RPM, Foot/Face Mount

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 67
Air Inlet: 1/2"-14 NPT
Air Pressure (psi): 90
Drive Length (in): 1.12
Drive Size (in): 1/2
Drive Type: Round Woodruff
Finish: Paint, Gray
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Keyaway Length (in): 0.13
Max Free Speed (rpm): 7900
Max Pressure (bar): 6.2
Max Torque (ft-lb): 4.1
Max Torque (in-lb): 50
Max Torque (nm): 5.6
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: Foot or Face
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 5.67
Product Width (in): 3.9
Product Height (in): 7
Product Weight (lb): 11.22
Rated Power (hp): 1.5
Rated Power (kW): 1.1
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 2.6
Starting Torque (nm): 3.5
Warranty: 1-year

IR SM4AMB-TK1-A

Tune-Up Kit for Ingersoll Rand SM4AMB-A AIngersoll Rand Motor

Includes: (4) Vanes, Rear Rotor Bearing, Front Rotor Bearing, Rotor Shaft Seal, (2) Gaskets, End Cap Gasket
Product Application and Uses: For use with SM4AMB-A Air Motor

For Use With

• SM4AMB-A

IR SM6AMA-005-A

Vane Kit for Ingersoll Rand SM6AMA-A/SM6AMAN-A AIngersoll Rand Motor

Includes: (4) Vanes
Product Application and Uses: For use with SM6AMA-A and SM6AMAN-A Air Motors

For Use With

• SM6AMA-A
• SM6AMAN-A

IR SM6AM-AH634

FOOT MOUNT

IR SM6AMA-A

Lube-Free Multi-Vane Air Motor, 5/8 Round Keyed, 3.6HP, 5.3ft-lb, 7900 RPM, Foot/Face Mount

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 120
Air Inlet: 1/2"-14 NPT
Air Pressure (psi): 90
Drive Length (in): 1.35
Drive Size (in): 5/8
Drive Type: Round Keyed
Finish: Paint, Gray
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Keyaway Length (in): 1.26
Max Free Speed (rpm): 7900
Max Pressure (bar): 6.2
Max Torque (ft-lb): 8.7
Max Torque (in-lb): 104
Max Torque (nm): 11.8
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: Foot or Face
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 7
Product Width (in): 5.12
Product Height (in): 8.19
Product Weight (lb): 16.25
Rated Power (hp): 3.6
Rated Power (kW): 2.7
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 5.3
Starting Torque (nm): 7.2
Warranty: 1-year

IR SM6AM-AH634-A

Mounting Foot for Ingersoll Rand SM6AMA-A AIngersoll Rand Motor

Includes: Mounting foot, (3) screws, (3) washers, (3) lock washers
Product Application and Uses: For use with SM6AMA-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM6AMA-A

IR SM6AMA-TK1-A

Tune-Up Kit for Ingersoll Rand SM6AMA-A/SM6AMAN-A AIngersoll Rand Motor

Includes: (4) Vanes, Rear Rotor Bearing, Front Rotor Bearing, Rotor Shaft Seal, (2) Gaskets, End Cap Gasket
Product Application and Uses: For use with SM6AMA-A and SM6AMAN-A Air Motors

For Use With

• SM6AMA-A
• SM6AMAN-A

IR SM8AMA-005-A

Vane Kit for Ingersoll Rand SM8AMA-A/SM8AMAN-A AIngersoll Rand Motor

Includes: (4) Vanes
Product Application and Uses: For use with SM8AMA-A and SM8AMAN-A Air Motors

For Use With

• SM8AMA-A
• SM8AMAN-A

IR SM8AMA-A

Lube-Free Multi-Vane Air Motor, 3/4 Round Keyed, 4.8HP, 10ft-lb, 7000 RPM, Foot/Face Mount

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 152
Air Inlet: 1"-11 1/2 NPT
Air Pressure (psi): 90
Drive Length (in): 1.45
Drive Size (in): 3/4
Drive Type: Round Keyed
Finish: Paint, Gray
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Keyaway Length (in): 0.98
Max Free Speed (rpm): 7000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 14
Max Torque (in-lb): 168
Max Torque (nm): 19
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: Foot or Face
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 7.3
Product Width (in): 5.85
Product Height (in): 13.66
Product Weight (lb): 22.5
Rated Power (hp): 4.8
Rated Power (kW): 3.6
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 10
Starting Torque (nm): 13.6
Warranty: 1-year

IR SM8AM-AH640

FOOT MOUNT

IR SM8AM-AH640-A

Mounting Foot for Ingersoll Rand SM8AMA-A AIngersoll Rand Motor

Includes: Mounting foot, (3) screws, (3) washers, (3) lock washers
Product Application and Uses: For use with SM8AMA-A Air Motor
Housing Material: Carbon Steel

For Use With

• SM8AMA-A

IR SM8AMA-TK1-A

Tune-Up Kit for Ingersoll Rand SM Series Air Motor

Includes: (4) Vanes, Rear Rotor Bearing, Front Rotor Bearing, Rotor Shaft Seal, (2) Gaskets, End Cap Gasket
Product Application and Uses: For use with SM8AMA-A and SM8AMAN-A Air Motors

For Use With

• SM8AMA-A

IR SM8AMAN-A

Lube-Free Multi-Vane Air Motor, 7/8 Round Keyed, 4.8HP, 10ft-lb, 7000 RPM, NEMA

The Ingersoll Rand® SM Series Lube Free Air Motors reduces the need for frequent maintenance and delivers maximum horsepower in a compact size, making them ideal for applications requiring portability and space efficiency. Tackle Harsh Environments with a self-regulating cooling system that maintains optimal temperatures for consistent performance and longevity. Easy Installation with multiple mounting options including Foot, Flange, Hub and NEMA for compatibility with a wide range of setups.

Features And Benefits

• Efficiency: Lube free airline operation provides clean, consistent performance that minimizes downtime – making maintenance quick and cost-effective.
• Performance: Get seamless control in dynamic environments with easy throttling and quick response times that ensure instant start and stop.
• Durability: Auto-stop mechanism protects the motor to deliver longevity and reliability under overload conditions.
• Safety: ATEX and CE certified for reliable performance in hazardous environments requiring intrinsically safe components.

Product Application and Uses: Paint Mixing, Conveyers, Pipe Cutting, Industrial Equipment, pre-lube and post-lube pumps
Air Consumption at Max HP (scfm): 152
Air Inlet: 1"-11 1/2 NPT
Air Pressure (psi): 90
Drive Length (in): 1.97
Drive Size (in): 7/8
Drive Type: Round Keyed
Finish: Black Oxide
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Keyaway Length (in): 1.04
Max Free Speed (rpm): 7000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 14
Max Torque (in-lb): 168
Max Torque (nm): 19
Motor: Rotary Vane
Motor: In line
Motor: Direct Drive
Mounting Type: NEMA
Operating Temperature Range: 33.8F to 104F
Power Source: Air Powered
Product Length (in): 8.76
Product Width (in): 5.85
Product Height (in): 13.66
Product Weight (lb): 22.5
Rated Power (hp): 4.8
Rated Power (kW): 3.6
Reversible: Reversible
Standards/Certifications: ATEX and CE certified
Starting Torque (ft-lb): 10
Starting Torque (nm): 13.6
Warranty: 1-year