INGERSOLL-RAND IR TOOL S12880

IR DLB2120-10

BIT PACKET

IR DLB2122-10

BIT PACKET

IR DLB2123-10

BIT PACKET

IR DLC-1011

SCREW

IR DLB2128-10

BIT PACKET MPQ=10

IR DLW3402

RELEASE GRIP PLATE

IR DLW3602

RELEASE SHAKER PLATE

IR DLW3802

RELEASE SHAKER PLATE

IR DP991-278

BALL

IR DP22N

MOTOR

IR DP991-40

HOUSING

IR DP991-280

VALVE

IR DP991-705

BUSHING

IR DP991-53

ROTOR

IR DR023B-KIT-EU

MOTOR ASSEMBLY

IR DP991SP-102

COVER

IR DR051B-19-A

DRILL

IR DR051B-11-B-EU

DRILL

IR DXS2KH8HB

DXS2 HEX BIT IMPACT SOCKET SET, SAE, 8 PC

IR DXS2KM8HB

DXS2 HEX BIT IMPACT SOCKET SET, METRIC, 8 PC

IR DXS2KMH6LN

DXS2 LUG NUT IMPACT SOCKET SET, 6 PC

IR DXS2SH1

DXS2 1" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.38
Product Width (in): 1.38
Product Height (in): 1.57
Product Weight (lb): 0.3
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1116

DXS2 11/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.01
Product Width (in): 1.01
Product Height (in): 1.57
Product Weight (lb): 0.2
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 11/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1116L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-116

DXS2 1-1/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.52
Product Width (in): 1.52
Product Height (in): 1.9
Product Weight (lb): 0.38
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1-1/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-116L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1116L

DXS2 11/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.01
Product Width (in): 1.01
Product Height (in): 2.95
Product Weight (lb): 0.45
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 11/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1116
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH1116HB

DXS2 HEX BIT IMPACT SOCKET, 11/16 IN

IR DXS2SH1-14

DXS2 1-1/4" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.8
Product Width (in): 1.8
Product Height (in): 2.22
Product Weight (lb): 0.52
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1-1/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-14L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-116L

DXS2 1-1/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.52
Product Width (in): 1.52
Product Height (in): 2.95
Product Weight (lb): 0.78
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1-1/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-116
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-18

DXS2 1-1/8" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.64
Product Width (in): 1.64
Product Height (in): 2.02
Product Weight (lb): 0.38
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1-1/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-18L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-14L

DXS2 1-1/4" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.8
Product Width (in): 1.8
Product Height (in): 2.95
Product Weight (lb): 0.88
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1-1/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-14
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH12HB

DXS2 HEX BIT IMPACT SOCKET, 1/2 IN

IR DXS2SH12

DXS2 1/2" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.85
Product Width (in): 0.85
Product Height (in): 1.57
Product Weight (lb): 0.17
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1/2in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH12L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1316

DXS2 13/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 1.57
Product Weight (lb): 0.25
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 13/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1316L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-316

DXS2 1-3/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.15
Product Weight (lb): 0.46
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1-3/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-316L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1316L

DXS2 13/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 2.95
Product Weight (lb): 0.56
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 13/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1316
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH1-316L

DXS2 1-3/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.95
Product Weight (lb): 0.82
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1-3/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1-316
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH1316LN

DXS2 LUG NUT IMPACT SOCKET, 13/16 IN

IR DXS2SH1516

DXS2 15/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.25
Product Width (in): 1.25
Product Height (in): 1.57
Product Weight (lb): 0.29
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 15/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1516L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH1L

DXS2 1" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.38
Product Width (in): 1.38
Product Height (in): 2.95
Product Weight (lb): 0.68
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH1
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH34

DXS2 3/4" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.08
Product Width (in): 1.08
Product Height (in): 1.57
Product Weight (lb): 0.24
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 3/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH34L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH34HB

DXS2 HEX BIT IMPACT SOCKET, 3/4 IN

IR DXS2SH38HB

DXS2 HEX BIT IMPACT SOCKET, 3/8 IN

IR DXS2SH58

DXS2 5/8" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 1.57
Product Weight (lb): 0.19
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 5/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH58L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH58HB

DXS2 HEX BIT IMPACT SOCKET, 5/8 IN

IR DXS2SH58L

DXS2 5/8" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 2.95
Product Weight (lb): 0.41
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 5/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH58
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH716

DXS2 7/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 1.57
Product Weight (lb): 0.16
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 7/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH716L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH716HB

DXS2 HEX BIT IMPACT SOCKET, 7/16 IN

IR DXS2SH716L

DXS2 7/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 2.95
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 7/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH716
• DXSK2H14L
• DXSK2H14
• DXSK2M15
• DXSK2M15L

IR DXS2SH78

DXS2 7/8" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

• DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
• Up to 20% longer life compared to traditional square driven sockets.
• Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
• Ball nose retention pin for quick, tool-free installation and removal.
• High visibility laser etched markings to easily identify the size you need.
• Relieved 6 point Hex corners help reduce faster rounding.
• Square retention pin conversion kit available for secure connection.
• Complies with ASME B107.110
• Backed by a lifetime limited warranty for peace of mind with proven reliability.
• For use with all Ingersoll Rand DXS2 drive Impacts.

Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.22
Product Width (in): 1.22
Product Height (in): 1.57
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 7/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With

• 2236QPTIMAX
• 2236QTIMAX
• 2236QTIMAX-2
• 2236QTIMAX-G
• 2236QTIMAX-O
• 2236QTIMAX-R
• W7153
• W7153-AP
• W7153-K22
• W7153-K22-CN
• W7153-K22-IN
• W7153-K22-JP
• W7153-K22-KR
• W7153-K22-SGHK
• W7153-K22B-AN
• W7153-K22B-EU
• W7253-TL

Similar IR

• DXS2SH78L
• DXSK2H14
• DXSK2H14L
• DXSK2M15
• DXSK2M15L

IR DXS2SH78HB

DXS2 HEX BIT IMPACT SOCKET, 7/8 IN

IR QP381D

Q2 DRILL W/ E-CHIP

IR QP302LD

Q2 DRILL W/ E-CHIP

IR QS110-HK1

KIT, HOUSING FOR QS110

IR QS110-MK1

KIT, MOTOR

IR QS110-RPK

RETAINING PIN KIT - QS110

IR QS110-PK1

QS110 PULSE KIT

IR QS120-PK2

PULSE KIT FOR QS120 & QS140

IR QS110-VK1

VANE KIT FOR QS110

IR QS140-VK1

VANE KIT FOR QS140

IR QS120-VK1

VANE KIT FOR QS120

IR QS150P-TK1

MECHANISM TUNE -UP KIT QS150P-TK1

IR QS150-HK3

KIT, HOUSING, MODEL QS150

IR QS150-VK1

Vane Kit for QS150

IR QS150-PK3

PULSE KIT - QS150

IR QS1L10D1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L02S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L15C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L15S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L20C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L20D1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1P05S3D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L20S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1P10S3D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1P20C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1T02S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1T05C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1T15S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1T20C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1P15C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS381D

Q2 DRILL W/ E-CHIP

IR QS50-80RPK

KIT, RETAINING PIN

IR QS1P28C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS50P3

SHUTOFF PULSE TOOL 3/8" SQUARE DRIVE QS50P3

IR QS1T05S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1T20S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS50PQ1

SHUTOFF PULSE TOOL 1/4" QUICK CHANGE QS50PQ1

IR QS50P-TK1

MECHANISM TUNE -UP KIT QS50P-TK1

IR QS60P3-301

MODEL LABEL- QS60P3

IR QS60P-TK2

MOTOR TUNE-UP KIT QS60P-TK2

IR QS60P3-99

WARNING LABEL

IR QS60P-TK3

HOUSING TUNE-UP KIT QS60P-TK3

IR QS60-VK1

KIT, VANE

IR QS70-PK1

PULSE KIT - QS70

IR QS70P-TK2

MOTOR TUNE-UP KIT QS70P-TK2

IR QS80-PK1

PULSE KIT - QS80

IR QS70-VK1

KIT, VANE

IR QS80P-TK2

MOTOR TUNE-UP KITQS80P-TK2

IR QS80-VK1

KIT, VANE

IR QS-UMK

KIT, UNIVERSAL MOTOR, QS 50-80 MODELS

IR QS-UHK

KIT, UNIVERSAL HOUSING