Hydraullic Units

EP T6003L

These dry high-pressure testing gauges feature a large diameter face for easy readability and dual scales of psi and bar. An integral maximum indicator pointer is included as standard.

Choose a T-Series high pressure gauge from range with maximum working pressures ranging from 1,000 up to 50,000 psi (70 to 3500 bar). All gauge cases are manufactured from tough grades of steel, which depending on the model, will be high alloy steel, 316 stainless steel or 401 stainless steel. All gauges have spring-loaded backs with rubber blow-out plugs to protect the case assembly in case of over-pressurization.

Gauges models up to 20,000 psi (1400 bar) are accurate to within +/- 0.5%, and models to 50,000 psi (3500 bar) to within +/- 1.5%.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: T - Gauge
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP T-630

EP TH630

• Type: Coupler
• Max Bar: 700
• Max PSI: 10000

• Product Group: Couplers
• Product Line: Industrial Tools
• Series: TH
• SubTypes: Spin-on Coupler

• Enerpac hydraulic couplers provide quick connection of hydraulic lines
• 10,000 and 11,600 psi 1/4" couplers for torque wrenches
• 10,000 psi 3/8" couplers for cylinders, tools and pumps
• Dimension A is total length when male and female halves are connected.

EP TJH109LS

• Self-contained models for maximum versatility.
• Low toe heights fit in tight clearances.
• The lowest handle effort for easy operation.
• TJH109LS comes equipped with an ergonomic pistol grip for rapid advancement to load.
• The lowest weights for reduced back injuries.
• Lever Bars are included with all models.
• TJH109LS Toe Jack comes equipped with a solid one piece Lever Bar.
• Toe Lifts are rated at maximum capacity on all models.

• Type: Jack

• Product Line: Hydraulic Tools
• Series: TJH
• Stroke Inches: 9
• Stroke MM: 228.6
• SubTypes: Heavy Duty Toe Jacks

• Capacity Imperial Tons: 10
• Capacity KN: 89

EP TJH10A

• Self-contained models for maximum versatility.
• Low toe heights fit in tight clearances.
• The lowest handle effort for easy operation.
• The lowest weights for reduced back injuries.
• Swivel sockets for access in close quarters. (TJH5A & TJH10A only).
• Lever Bars are included with all models.
• TJH2A, TJH5A and TJH10A Toe Jacks come equipped with a 3 piece Lever Bar set to accommodate space limitations.
• Toe Lifts are rated at maximum capacity on all models.

• Type: Jack

• Product Line: Hydraulic Tools
• Series: TJH
• Stroke Inches: 5.71
• Stroke MM: 149.1
• SubTypes: Heavy Duty Toe Jacks

• Capacity Imperial Tons: 10
• Capacity KN: 89

EP TJH5A

• Self-contained models for maximum versatility.
• Low toe heights fit in tight clearances.
• The lowest handle effort for easy operation.
• The lowest weights for reduced back injuries.
• Swivel sockets for access in close quarters. (TJH5A & TJH10A only).
• Lever Bars are included with all models.
• TJH2A, TJH5A and TJH10A Toe Jacks come equipped with a 3 piece Lever Bar set to accommodate space limitations.
• Toe Lifts are rated at maximum capacity on all models.

• Type: Jack

• Product Line: Hydraulic Tools
• Series: TJH
• Stroke Inches: 4.73
• Stroke MM: 117.3
• SubTypes: Heavy Duty Toe Jacks

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

EP TJHAK10

• Type: Service Kit

• Series: TJH

EP TJHAK101

• Type: Service Kit

• Series: TJH

EP TJHAS10

• Type: Service Kit

• Series: TJH

EP TJHRH10

• Type: Service Kit

• Series: TJH

EP TM-5

EP TR630

• Type: Coupler
• Max Bar: 700
• Max PSI: 10000

• Product Group: Couplers
• Product Line: Industrial Tools
• Series: TR - Coupler
• SubTypes: Spin-on Coupler

• Enerpac hydraulic couplers provide quick connection of hydraulic lines
• 10,000 and 11,600 psi 1/4" couplers for torque wrenches
• 10,000 psi 3/8" couplers for cylinders, tools and pumps
• Dimension A is total length when male and female halves are connected.

EP TRCM2006

• Type: Hydraulic Cylinders
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: TR
• Stroke Inches: 6
• Stroke MM: 152.4
• SubTypes: Tie Rod Cylinder

• Clevis mount cylinders include pivot pin for mounting in your machine
• Standard rod eyes and rod clevises available for each bore size.
• NFPA style MP1
• Designed to carry shear loads
• Pivot pins should be carried by rigidly held bearings and closely fit for the entire length of the pin

EP TRCM2504

• Type: Hydraulic Cylinders
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: TR
• Stroke Inches: 4
• Stroke MM: 101.6
• SubTypes: Tie Rod Cylinder

• Clevis mount cylinders include pivot pin for mounting in your machine
• Standard rod eyes and rod clevises available for each bore size.
• NFPA style MP1
• Designed to carry shear loads
• Pivot pins should be carried by rigidly held bearings and closely fit for the entire length of the pin

EP TRK-2

EP V10

The V10 Auto-Damper Valve will protect a pressure gauge during high cycle applications. It does this by creating a flow resistance if a load is released suddenly.

It may be used to automate clamp cycles, prevent pressure loss, and provide additional operator and component safety. No adjustment is necessary, and the valve simply connects to GA1, GA2 or GA4 gauge adaptors with ½" NPTF male and female threads.

• Type: Valve
• Max Bar: 700
• Max PSI: 10000

• Product Group: Valves, Pumps
• Product Line: Work Holding Tools
• Series: V
• SubTypes: Auto-damper Valve

• To protect gauge during high cycle applications
• Creates a flow resistance when load is released suddenly No adjustments are necessary
• Fits directly into GA-series gauge adaptor
• Used to automate clamp cycles, prevent pressure loss and provide additional operator and component safety
• Regulate oil flow or system pressure
• All valves feature NPT or SAE porting to insure against leakage at rated pressure
• Can easily be installed in any system
• All valves are painted, coated or plated for corrosion resistance

EP V152

The V152 and V152VN adjustable hydraulic pressure relief valves are used to limit hydraulic pressure and regulate oil flow.

Easy adjustment is done by simply turning the handle clockwise to increase the pressure. The valves offer repeatability accuracy of ±

EP V-152

EP V152NV

The V152 and V152VN adjustable hydraulic pressure relief valves are used to limit hydraulic pressure and regulate oil flow.

Easy adjustment is done by simply turning the handle clockwise to increase the pressure. The valves offer repeatability accuracy of ±3% and an adjustment range of 800-10,000 psi (55-700 bar).

The maximum oil flow is 1830 in3 /min (30 l/min) and the valve features NPT or SAE porting to insure against leakage at rated pressure. A 3 ft return line hose kit is included.

The V152NV Nickel plated model option provides enhanced resistance to corrosion. Viton seals in V66NV and V152NV for high temperature applications.

• Type: Valve
• Max Bar: 700
• Max PSI: 10000

• Product Group: Valves, Pumps
• Product Line: Industrial Tools
• Series: V
• SubTypes: Pressure Relief Valve

• Corrosion resistant, nickel-plated valves
• Viton Seals provide heat and chemical resistance
• Used to automate clamp cycles, prevent pressure loss and provide additional operator and component safety
• Regulate oil flow or system pressure
• All valves feature NPT or SAE porting to insure against leakage at rated pressure
• Can easily be installed in any system

EP V-17

EP V-182

EP V-2000

EP V-66

EP V-82

EP V82K

• Type: Service Kit

• SubTypes: Repair Part