Hydraullic Units

EP GA90

• An intermittent portable foot controlled pump best suited for pressing, production and shop tool applications. Runs effectively on 10 CFM (10 pi3) / @ 60 - 150 PSI (4,13 - 10,34 bar).
• 3 position non-slip, diamond grip treadle for safe advance, hold & retract operation.
• Quiet operation - 85 dba @ 10,000 psi (700 bar) for in-house production.
• Rugged all metal construction.
• High quality rubber gasket seals.
• Integrated non-spill vent / oil level indicator.
• Pedal can be used to reduce operator strain by locking in the release position.
• Four mountable non-skid rubber feet can be used to make your pump stationary.
• A non-slip diamond plate texture gives the user safe and controlled foot pivoting action.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: GA - Simplex
• SubTypes: Air Pump - Foot Pump

EP GBJ-010SA

EP GBJ-020A

EP GF-10P

EP GF120B

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP GF-230P

EP GF-50P

EP GF510P

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP GF-5P

EP GF813B

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP GF-813P

EP GF-871P

EP H-7202

EP H7206

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H-7206

EP H-7210

EP H-7220

EP H7230

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H7250

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H7350

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H9203

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H-9203

EP H9206

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H-9206

EP H9206Q

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo