Hydraullic Units

EP HCG1004

HCG Series Hydraulic Cylinders are the single-acting load return option from the industry-proven Enerpac high-tonnage range.

As with all of our high-tonnage cylinders, included are a multitude of special features inside and out, to deliver the increased levels of durability, safety, and performance vital for large-scale construction projects. Among these features are low-wear high pressure seals, replaceable composite plunger support bearings, and a tough nitrocarburized finish on the cylinder body and the plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCG
• Stroke Inches: 3.94
• Stroke MM: 100
• SubTypes: High Tonnage Cylinder

• Load return plunger - simple to use and fewer components to maintain
• Nitrocarburized finish - resists side-loading and cyclic wear
• 10% resistance to side-load over the full cylinder stroke
• Stop-ring prevents plunger blow-out
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCG100K1
• Accessories: CATS101, CHM6

EP HCL50K

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Seal Kit

EP HCR2002

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.

Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCR
• Stroke Inches: 1.97
• Stroke MM: 50
• SubTypes: High Tonnage Cylinder

• Double-acting for fast and controlled advance and retract
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCR200K1
• Accessories: CATS200

EP HF104

The Enerpac HF-series Hydraulic Oil is specially formulated for powered hydraulic pumps. The HF-series oil contains anti-sludge, anti-rust, and anti-foam additives for overall superior performance. The HF-series hydraulic oil prevents cavitation and offers maximum volumetric efficiency and maximum heat transfer.

The HF-series oil is not for use in hand pumps. Use the Enerpac LX-Series Oil for hand powered pumps.

Offered in 1 quart, 1 gallon, 5 gallon and 55-gallon sizes. The HF-series hydraulic oil has a viscosity index of 100 min.

• Type: Hydraulic Oil

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools, Bolting Tools
• Series: HF
• SubTypes: Oil

• Specially formulated for power pumps
  • maximum volumetric efficiency
  • maximum heat transfer
  • prevents cavitation
  • anti-sludge, anti-rust, anti-foam additives
• Maximum film protective lubricity
  • anti-oxidation additives
• High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

EP HLP3113

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

EP HLP3209

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

EP HLP3215

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

EP HP3111

• Type: Service Kit

EP HSQ3500

HSQ Square Drive Hydraulic Torque Wrench Cassettes work with compatible HMT-Series drive units, and feature an easy-to-use push button, quick release, reversible square drive.

ATEX declared. Calibration certificate included. All HSQ cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

With just three completely enclosed moving parts, the HSQ Cassette minimizes pinch points and reduces the need for maintenance.

Provided with each cassette is a fully adjustable 360 degree in-line reaction arm. This attaches around the square drive making it possible to turn the drive unit away from an obstacle.

HSQ-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

• Type: Torque Wrench
• Max Bar: 690
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HSQ
• SubTypes: Square Drive Cassette

• Innovative design that completely encloses all moving parts and minimizes pinch points
• Reaction arm supplied as standard
• Fully adjustable 360 degree in-line reaction arm
• Fine tooth ratchet prevents locking-on

• Simple robust design with just three moving parts for reduced maintenance
• Push button, quick release, reversible square drive

• The reaction arm, positioned around the square drive instead of the back of the drive unit, provides you with the possibility to turn the drive unit away from an obstacle

• Constant torque output provides accuracy of +/- 3% across full stroke.

• All HMT tools are CE - ATEX certified

Supplied with a calibration certificate.

IMPORTANT: You will need an HMT-drive unit to operate the HSQ-Square Drive Cassettes which must be ordered separately.

EP IB1538

• Type: Jack Accessory

• Product Line: Mechanical Tools
• Series: IB
• SubTypes: I-Beam Base

EP IPE10060

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100
• Capacity KN: 933

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR10013, ZE4420SB-N, GF871P, HC9306, GA3
• Accessories: PK1002, A175, IPL100

EP IPE2510

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, ZE3310SB-N, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPE5060

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZE4420SB-N, GF50P, HC9306, GA2
• Accessories: PK501, A150, IPL100

EP IPH010S10-1

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10

• Set Includes: RC1010, GA2, GF10P, HC9306

EP IPH050D13-2

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50

• Set Includes: RR5013, GA2, GF50P, HC9306

EP IPH2531

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, P80, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPL100-SEAK

• Type: Service Kit

• SubTypes: Repair Part

EP IPLR100

• Type: Press Accessory

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IPL
• SubTypes: Press Hydra-Lift

• Capacity Imperial Tons: 100

• Allows easy, effortless daylight adjustment.
• Includes accessory chain

EP IPR-10075

EP JBI10

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP JBI-50

EP JH1006

EP JHA1506K2

• Type: Service Kit

• SubTypes: Repair Part

EP L345045

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Saddle Kit

EP LGHMS310EB

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 10
• Capacity KN: 92

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH310, SGM0704, BHP112, BHP181, BHP180, PUD1300B, G2535L, HC7206C