Transfer

GG 256200

T1 PUMP

T1 Supply Pump (Stainless Steel): 2:1 Fluid to Air Ratio

Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

Ideal for moving A and B materials to Reactor spray machines.Provide consistent feed pressures and flow rates for dependable resultsLower pressure drops with higher viscosity materials at any ambient temperatureDesigned and manufactured by the worldwide leader in pump technologyLonger lasting pump - designed for durability with less maintenanceQuick-release bung adapter for easy drum removal without interference from hose connectionsStainless steel wetted parts for corrosion-resistancePTFE seals for improved performance and less maintenance

GG 295616

T2 PUMP, TRANSFER, 2:1

T2 Supply Pump (Stainless Steel): 2:1 Fluid to Air Ratio

Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

Ideal for moving A and B materials to Reactor spray machines.Provide consistent feed pressures and flow rates for dependable resultsLower pressure drops with higher viscosity materials at any ambient temperatureDesigned and manufactured by the worldwide leader in pump technologyLonger lasting pump - designed for durability with less maintenanceQuick-release bung adapter for easy drum removal without interference from hose connectionsStainless steel wetted parts for corrosion-resistancePTFE seals for improved performance and less maintenance

GG 01161S

Seal, Uhmw

GG 26A304

T3 PUMP, TRANSFER, 3:1

T3 Supply Pump (Stainless Steel): 3:1 Fluid to Air Ratio

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.

Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor.

GG 01070B

Seal, Polyseal, .562, OD, Black

GG P23DSA

DURA-FLO PUMP, 6500/580

Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, SST, 3 UHMW / 2 PTFE Packings

Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

Positive displacement, 2 ball piston design provides uniform and easily controlled deliveryHigh pump pressure and flow performance to handle a broad range of paints and coatingsImproved serviceability with fewer parts, faster repairs and lower ownership costMonitor and protect your pump with DataTrak

GG 01035U

Seal, Polyseal

GG 01071U

Seal, Polyseal, .437, OD, Black

GG 16K960

Housing, Transfer, Etched

GG EC1142

E-FLO PUMP, 1HP, 750, BSC, TRI, SLD, WALL

Graco EC1142 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, Basic, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp, Wall

The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar sized pneumatic pumps - lowering your energy bill and saving you money

• Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalyzed coatings
• Minimal pulsation at changeover provides a more consistent finish
• Electric motor eliminates icing - giving you smoother pump operation and better finished product

• Model: E-Flo
• Series: DC 4-Ball

• Application: Circulation

• Compatible Material: Solvent borne, High Solids, Xirallic, Metallics, Varnish, CARC

• Fluid Inlet Size (in): 1-1/2
• Fluid Inlet Size (mm): 38.1

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Section Type: Sealed

• Includes: Basic Control, Wall Mount

• Input Voltage (V ac): 250

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 4
• Maximum Flow Rate (L/min): 15.14

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 20.7
• Maximum Working Pressure (kPa): 2070
• Maximum Working Pressure (MPa): 2.1
• Maximum Working Pressure (psi): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Portable: Non-Portable

• Power Rating (HP): 1

GG P14LCS

CHECK-MATE PUMP, 14:1 3400/500 CS SD

Graco P14LCS 14:1 - 500cc Check-Mate Pump with NXT 3400 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer

• NXT 3400 Air Motor
  

  Low Noise

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 500cc Check-Mate Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • NEW Xtreme Coupler

    Quick-disconnect coupler for easy maintenance

    • Replaceable Outlet Fitting

      Reduces repair costs

      • Piston Valve with Floating Piston Seal

        For maximum pressure balance over a range of material viscosities

        • Replaceable Seat

          Minimizes service costs

          • Floating Priming Plate

            Provides uniform flow

            • Cast Outlet and Inlet Housing

              Improves structural integrity

              • NEW Cartridge Throat Packings

                Allows for easy servicing without removing from ram

                • Modular Air Valve

                  De-icing controls

                  Up to 50% quieter than previous models

                  Modular air valve - eliminates stalling, easy-to-repair

                  • Hard Part Coatings

                    Standard Severe Duty coating on rods and cylinder maximizes wear life

                    
                    

                    • Model: Check-Mate
                    • Ambient/Warm Melt/Hot Melt: Ambient
                    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                    • Fluid Outlet Size (in): 1-1/2
                    • Fluid Outlet Thread Gender: Male
                    • Fluid Outlet Thread Type: NPT
                    • Includes: Motor, Displacement Pump, Rod Tie, Adaptor Rod, Collar Coupling, Nut Coupling
                    • Material: Carbon Steel
                    • Maximum Working Pressure (bar): 98
                    • Maximum Working Pressure (kPa): 9800
                    • Maximum Working Pressure (MPa): 9.8
                    • Maximum Working Pressure (psi): 1400
                    • Power Type: Pneumatic
                    • Pump Ratio: 14:1

GG 01066B

O- Ring, Buna, 40 Duro

GG 15G976

2 Ball Transfer Pump, Displ, Recip Sst/Ptfe

GG 19Z079

SOLOTECH ST26 PUMP, I26-HAC-EP-PV-A1-A1-0

SoloTechâ„¢ i26 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

GG 902147

MONARK TRANSFER PUMP, 5:1

Graco 902147 5:1 Ratio Stainless Steel Monark Pump

Designed for high production applications, Monark pumps provide uniform and easily controlled delivery with its reliable Monark air motor.

Application: Positive displacement, 2-ball piston design. Typical Fluids handled include solvent-borne and water-borne fluids, high solids, plural component coatings, resins, stains, lacquers, varnishes, cleaning fluids, acid-catalyzed materials and high-solid coatings.

• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Fluid return stanchion for circulation back to the pump
• Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids

• Model: Monark

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 8.2
• Maximum Air Inlet Pressure (bar): 8.2
• Maximum Air Inlet Pressure (kPa): 827
• Maximum Air Inlet Pressure (psi): 120

• Maximum Flow Rate (GPM): 2.5
• Maximum Flow Rate (L/min): 9.5

• Maximum Working Pressure (bar): 41
• Maximum Working Pressure (kPa): 4100
• Maximum Working Pressure (MPa): 4.1
• Maximum Working Pressure (psi): 600

• Portable: Non-Portable

• Power Type: Pneumatic

• Pump Ratio: 5:1

GG K30FW0

KING SPRAYER, 30:1, H-P, BF, WALL, BARE

King 30:1 Sprayer, Integrated Filter, Wall Mount, Air Controls, Siphon Kit

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

New MaxLife Pump Lowers

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

New Air Motor

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG P20LCS

CHECK-MATE PUMP, 20:1 700/060 LW NS CS SD

Graco P20LCS 20:1 - 60cc Check-Mate Pump with NXT 700 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer

• NXT 700 Air Motor
  

  Low Noise

  Modular design for easier maintenance

  Highest technology air motor on the market

• 60cc Check-Mate Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Xtreme Coupler - No tool connection

  Quick-disconnect coupler for easy maintenance

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • NEW Xtreme Coupler

    Quick-disconnect coupler for easy maintenance

    • Replaceable Outlet Fitting

      Reduces repair costs

      • Piston Valve with Floating Piston Seal

        For maximum pressure balance over a range of material viscosities

        • Replaceable Seat

          Minimizes service costs

          • Floating Priming Plate

            Provides uniform flow

            • Cast Outlet and Inlet Housing

              Improves structural integrity

              • NEW Cartridge Throat Packings

                Allows for easy servicing without removing from ram

                • Modular Air Valve

                  De-icing controls

                  Up to 50% quieter than previous models

                  Modular air valve - eliminates stalling, easy-to-repair

                  • Hard Part Coatings

                    Standard Severe Duty coating on rods and cylinder maximizes wear life

                    
                    

                    • Model: Check-Mate
                    • Ambient/Warm Melt/Hot Melt: Ambient
                    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                    • Fluid Outlet Size (in): 3/4
                    • Fluid Outlet Thread Gender: Male
                    • Fluid Outlet Thread Type: NPT
                    • Includes: Motor, Displacement Pump, Washer Lock (6), Screw
                    • Material: Carbon Steel
                    • Maximum Working Pressure (bar): 138
                    • Maximum Working Pressure (kPa): 13800
                    • Maximum Working Pressure (MPa): 13.8
                    • Maximum Working Pressure (psi): 2000
                    • Power Type: Pneumatic
                    • Pump Ratio: 20:1

GG P45LSE

DURA-FLO PUMP, 6500/290

Dura-Flo NXT 2-Ball Piston Pump, 45:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE Packings

Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

Positive displacement, 2 ball piston design provides uniform and easily controlled deliveryHigh pump pressure and flow performance to handle a broad range of paints and coatingsImproved serviceability with fewer parts, faster repairs and lower ownership costMonitor and protect your pump with DataTrak

GG 01017U

Seal, Polyseal, Fluorotrel

GG 26C116

Dispenser, Husky, 55 Gallon

GG 26D001

T4 PUMP, CS

T4 Supply Pump (Carbon Steel) 3:1 Fluid to Air RatioTransfer Pumps are required to move A and B materials to the Reactor® Spray Systems. The T4 Transfer Pump combines Graco’s proven Merkur® air-motor and carbon steel lower. The T4 is a 3:1 ratio pump with ProConnect technology – allowing you to quickly connect and disconnect the air motor from the pump lower.Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.

GG EC3441

E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND

E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp, StandE-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalyzed coatingsMinimal pulsation at changeover provides a more consistent finishElectric motor eliminates icing – giving you smoother pump operation and better finished productQuiet electric motor improves your work environment allowing you to remain near the pump for longer periods of time

GG JS17A8

HIGH-FLO PUMP, 4000, LN, SLD, TRI

High-Flo 4-Ball Pump, SST, 1.7:1, Low Noise XL, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-ClampPneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.Slow-moving reciprocating motion does not damage paint like other rotary pumping technologiesCompletely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materialsUltralife Series ceramic coating holds up to the harshest materials, including waterborne paintsDe-icing controls eliminate stallingRugged body armor, won’t rust or dent

GG JS40M8

HIGH-FLO PUMP, 2200/1000, LOW DT, SLD, TRI

High-Flo 4-Ball Pump, SST, 4:1, Low Noise Exhaust, DataTrak, Sealed SST Lower, Tri-Clamp Fittings, Ultralife Rod/CylinderPneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.Slow-moving reciprocating motion does not damage paint like other rotary pumping technologiesCompletely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materialsUltralife Series ceramic coating holds up to the harshest materials, including waterborne paintsDe-icing controls eliminate stallingRugged body armor, won’t rust or dentDataTrak tracks material usage, monitors and protects your pump

GG K30FW1

KING SPRAYER, 30:1, H-P, BF, WALL, COMP

King 30:1 Sprayer, Integrated Filter, Wall Mount, Air Controls, Siphon Kit, XTR-5+, 50 ft (15 m) Hose, 6 ft (1.8 m) Whip

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

New MaxLife Pump Lowers

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

New Air Motor

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.