GRACO INC. S10595

GG 245379

Plunger, Valve, Assy

GG 245394

Kit Repair, Circuit Brd, Gmax

GG 245401

Kit, Repair, Filter Base

GG 245413

Kit, Repl., Cylinder, Pump

GG 245416

Hose, Assembly, 4000 Psi

GG 245423

Fluid, Pump Life, 32 Oz

GG 245425

FLUID, HYDRAULIC FLUID, 32 OZ

Hydraulic Fluid, 32 oz Fluid in which power is transferred in hydraulic machinery

GG 245427

Fluid, Packing Seal 8 Oz.

GG 245440

Kit, Accy, Drain

GG 245441

Plug, Packless

GG 245449

Kit, Repair, Hose, Cpld 1/4 In. X 25

GG 245468

Kit, Accy, Suction, 300/350

GG 245515

Kit, Repair, Filter

GG 245516

Kit, Accessory, 12In Dispenser

GG 245520

Kit, Accessory, 12In Wind Deflec

GG 245571

Filter, Pump, 40 Mesh, Asm

GG 245611

Kit, Repair, Return Line, Lo

GG 245673

KIT, ACCY, STRAINER

Inlet Strainer for Pro210ES This 190ES/210ES Inlet Strainer helps you get the best performance from your sprayer. For a smooth finish and no clogs, it filters out paint debris from your pump. This will extend the life of your sprayer and help you paint faster. This filter is compatible with Graco models 190ES, 210ES and ProX21 Airless Paint Sprayers. Prolong pump life and reduce tip clogging by cleaning and replacing the inlet strainer regularly Damaged or worn inlet strainers can let unwanted debris to enter into the pump Use with Graco models 190ES, 210ES and ProX21 Airless Paint Sprayers

GG 245676

Handle

GG 245687

Kit, Accy, Valve Body

GG 245688

Kit, Repair, Torsion Bar

GG 245694

FIREBALL 300 LUBRICATOR, CHASSIS, 50:1

Fire-Ball® 300 Series 50:1 25 to 50 lb. (11.3 to 23 kg) Grease Pump - Portable Pail Dispenser Package As the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently. Install the Fire-Ball 300 50:1 in grease dispense applications. Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

GG 245724

Hose, Siphon, Assy, L=530Mm

GG 245732

Kit, Repair, Cable

GG 245733

Kit, Repair, Trigger Handle

GG 245737

Hose, Siphon, Assy, L=1060Mm

GG 245796

Kit, Repair, Filter Base

GG 245799

Kit, Repair, Housing Disp.

GG 245802

Manifold, Air

GG 245819

Kit, Repair, Pump

GG 245824

Manifold, Doser, Assy

GG 245832

Seat, Manifold

GG 245840

HOSE, HTD, 1/4, 50 FT, 5000 PSI

Graco 245840 Water Heated Hose, 5600 psi (386 bar), 1/4 in., 50 ft (15 m)

Water heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Water heat is a safe and effective way to maintain temperature between the primary heaters on an XP or XM proportioner and a remote mix manifold.

• Four (4) water heated hoses - provides maximum heat transfer

Re-closeable (hook & loop) scuff guard & insulation - easy to change A/B hose sizes for ratio balancing - saves time and money

Repairable - easy to maintain and replace components

Lightweight Nylon water tubing - Robust and easy to cut to length

Color coded A/B hose ends - Prevents cross-overs and incorrect connections

Xtreme-Wrap scuff - slides easily, won't snag, protects hose, repels water

Overlapping scuff ends - protects water and paint connections

5000 and 7250 psi (345 and 500 bar) pressure rating - matches XP and XM sprayer pressure ratings

Large bundle diameter - Add up to two ½ in. (1.27 cm) return lines for remote circulation

Precise A/B hose lengths - Eliminates kinking and bending between hose sections

• For Use With: Plural Component Sprayers

• Hose Heating Type: Water/Glycol
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 350
• Maximum Working Pressure (MPa): 35
• Maximum Working Pressure (psi): 5000

• Minimum Temperature (°C): 0
• Minimum Temperature (°F): 32

GG 245841

HOSE, HEATED, 1/4, 50 FT, 7400 PS

Graco 245841 Water Heated Hose, 7250 psi (500 bar), 1/4 in., 50 ft (15 m)

Water heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Water heat is a safe and effective way to maintain temperature between the primary heaters on an XP or XM proportioner and a remote mix manifold.

• Four (4) water heated hoses - provides maximum heat transfer

Re-closeable (hook & loop) scuff guard & insulation - easy to change A/B hose sizes for ratio balancing - saves time and money

Repairable - easy to maintain and replace components

Lightweight Nylon water tubing - Robust and easy to cut to length

Color coded A/B hose ends - Prevents cross-overs and incorrect connections

Xtreme-Wrap scuff - slides easily, won't snag, protects hose, repels water

Overlapping scuff ends - protects water and paint connections

5000 and 7250 psi (345 and 500 bar) pressure rating - matches XP and XM sprayer pressure ratings

Large bundle diameter - Add up to two ½ in. (1.27 cm) return lines for remote circulation

Precise A/B hose lengths - Eliminates kinking and bending between hose sections

• For Use With: Plural Component Sprayers

• Hose Heating Type: Water/Glycol
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

• Minimum Temperature (°C): 0
• Minimum Temperature (°F): 32

GG 245842

HOSE, HEATED, 3/8, 50 FT, 5000 PS

Water Heated Hose, 5600 psi (386 bar), 3/8 in., 50 ft (15 m) Water heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Water heat is a safe and effective way to maintain temperature between the primary heaters on an XP or XM proportioner and a remote mix manifold.

Four (4) water heated hoses - provides maximum heat transfer

Re-closeable (hook & loop) scuff guard & insulation - easy to change A/B hose sizes for ratio balancing - saves time and money

Repairable - easy to maintain and replace components

Transportation grade brass water fittings - stays tight, won't leak

Lightweight Nylon water tubing - Robust and easy to cut to length

Color coded A/B hose ends - Prevents cross-overs and incorrect connections

Xtreme-Wrap scuff - slides easily, won't snag, protects hose, repels water

Overlapping scuff ends - protects water and paint connections

5000 and 7250 psi (345 and 500 bar) pressure rating - matches XP and XM sprayer pressure ratings

Large bundle diameter - Add up to two ½ in. (1.27 cm) return lines for remote circulation

Precise A/B hose lengths - Eliminates kinking and bending between hose sections

GG 245843

HOSE, HEATED, 3/8, 50 FT, 7400PSI

Graco 245843 Water Heated Hose, 7250 psi (500 bar), 3/8 in., 50 ft (15 m)

Water heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Water heat is a safe and effective way to maintain temperature between the primary heaters on an XP or XM proportioner and a remote mix manifold.

• Four (4) water heated hoses - provides maximum heat transfer

Re-closeable (hook & loop) scuff guard & insulation - easy to change A/B hose sizes for ratio balancing - saves time and money

Repairable - easy to maintain and replace components

Lightweight Nylon water tubing - Robust and easy to cut to length

Color coded A/B hose ends - Prevents cross-overs and incorrect connections

Xtreme-Wrap scuff - slides easily, won't snag, protects hose, repels water

Overlapping scuff ends - protects water and paint connections

5000 and 7250 psi (345 and 500 bar) pressure rating - matches XP and XM sprayer pressure ratings

Large bundle diameter - Add up to two ½ in. (1.27 cm) return lines for remote circulation

Precise A/B hose lengths - Eliminates kinking and bending between hose sections

• For Use With: Plural Component Sprayers

• Hose Heating Type: Water/Glycol
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

• Minimum Temperature (°C): 0
• Minimum Temperature (°F): 32

GG 245844

HOSE, HEATED, 1/2, 50 FT, 5000 PSI

Graco 245844 Water Heated Hose, 5600 psi (386 bar), 1/2 in. (13 mm), 50 ft (15 m)

Water heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Water heat is a safe and effective way to maintain temperature between the primary heaters on an XP or XM proportioner and a remote mix manifold.

• Four (4) water heated hoses - provides maximum heat transfer

Re-closeable (hook & loop) scuff guard & insulation - easy to change A/B hose sizes for ratio balancing - saves time and money

Repairable - easy to maintain and replace components

Lightweight Nylon water tubing - Robust and easy to cut to length

Color coded A/B hose ends - Prevents cross-overs and incorrect connections

Xtreme-Wrap scuff - slides easily, won't snag, protects hose, repels water

Overlapping scuff ends - protects water and paint connections

5000 and 7250 psi (345 and 500 bar) pressure rating - matches XP and XM sprayer pressure ratings

Large bundle diameter - Add up to two ½ in. (1.27 cm) return lines for remote circulation

Precise A/B hose lengths - Eliminates kinking and bending between hose sections

• For Use With: Plural Component Sprayers

• Hose Heating Type: Water/Glycol
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 350
• Maximum Working Pressure (MPa): 35
• Maximum Working Pressure (psi): 5000

• Minimum Temperature (°C): 0
• Minimum Temperature (°F): 32

GG 245856

KIT, ACCY, GAUGE, MAGNUM

5,000 PSI Liquid-Filled Pressure Gauge Keep track of your spraying pressure by adding a liquid-filled Pressure Gauge. This pressure gauge in stainless steel is extremely durable thanks to its shatter-proof glass. Used for Magnum by Graco paint sprayersLiquid-filled pressure gauge Stainless steel pressure gauge Shatter-proof glass

GG 245862

Heater, Hp, 200V, 4000W, Haz

GG 245868

Heater, Hp, 200V, 4000W, Non-Haz

GG 245875

Kit, Accy

GG 245876

Kit, Repair

GG 245885

Kit, Repair, Foot Valve

GG 245923

Kit, Repair, Control Board

GG 245944

Kit, Accy

GG 245956

Reactor Proportioner, Module, E-20

GG 245974

Display, System, Pump, 3 Zone Heat

GG 245979

Control, Heat, 3 Zone

GG 246013

Kit, Repair, Hour Meter

GG 246015

Kit, Accy, Motor Mount

GG 246046

REACTOR HEATED HOSE, 50', 3/8, 2000PSI, W/O S

50 ft x 3/8 in Heated Hose, 2000 psi, Thermocouple, No Scuff, Reactor 1

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246047

REACTOR HEATED HOSE, 50', 1/2, 2000 PSI

50 ft x 1/2 in Heated Hose, 2000 psi, Thermocouple, Mesh Scuff, Reactor 1

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246048

REACTOR HEATED HOSE, 25', 1/4, 2000PSI

25 ft (7.6 m) Low Pressure Thermocouple Heated Hose with 1/4 in (6.3 mm) Inside Diameter

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246052

REACTOR HEATED HOSE, 50', 1/4, 3500 PSI

50 ft (15 m) Heated Hose with 1/4 in (6.3 mm) in Inside Diameter

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246054

REACTOR HEATED HOSE, 50', 1/2, 3500 PSI

50 ft x 1/2 in Heated Hose, 3500 psi, Thermocouple, No Scuff, Reactor 1

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246059

Reactor Heated Hose, A, 50' 1/4, 2000 Psi

GG 246060

Reactor Heated Hose, B, 50', 1/4, 2000 Psi

GG 246063

Reactor Heated Hose, A, 50', 1/2, 2000Psi

GG 246064

Reactor Heated Hose, B, 50', 1/2, 2000Psi

GG 246065

Reactor Heated Hose, A, 25', 1/4, 2000 Psi

GG 246066

Reactor Heated Hose, B, 25', 1/4, 2000 Psi

GG 246067

Reactor Heated Hose, A, 50', 1/4, 3500 Psi

GG 246068

Reactor Heated Hose, B, 50', 1/4, 3500 Psi

GG 246069

Reactor Heated Hose, A, 50', 3/8, 3500 Psi

GG 246070

Reactor Heated Hose, B, 50', 3/8, 3500 Psi

GG 246071

Reactor Heated Hose, A, 50', 1/2, 3500Psi

GG 246072

Reactor Heated Hose, B, 50', 1/2, 3500Psi

GG 246075

REACTOR HEATED HOSE, 50', 3/8, W/O CBL/SG

50 ft x 3/8 in Heated Hose, 2000 psi, Without Cable, No Scuff, Reactor 1 & 2

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

GG 246076

REACTOR HEATED HOSE, 50', 1/2, W/O CABLE

50 ft (15 m) Heated Hose with 1/2 in Inside Diameter Without Cable

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life

GG 246094

Reactor Heated Hose, A, 25', 3/8, 2000Psi

GG 246095

Reactor Heated Hose, B, 25', 3/8, 2000 Psi

GG 246105

FUSION AP GUN, ROUND 05

Graco 246105 Round Fusion Air-Purge Gun with 05 Mix Chamber and 0.070 in (1.8 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.218
• Fluid Orifice Size (in): 0.086
• Fluid Orifice Size (mm): 2.18

• Gun Type: Air Purge Gun
• Gun Weight (g): 1130
• Gun Weight (kg): 1.1
• Gun Weight (lb): 2.5
• Gun Weight (oz): 40

• Impingement Port Size (in): 0.086
• Impingement Port Size (mm): 2.15

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 05 (.086)

• Overall Height (cm): 20.6
• Overall Height (in): 8.1
• Overall Height (mm): 206
• Overall Length (cm): 19.1
• Overall Length (in): 7.5
• Overall Length (mm): 191
• Overall Width (cm): 8.4
• Overall Width (in): 3.3
• Overall Width (mm): 84

• Pattern Size (in): 18 in @ 24 in from target

GG 246122

Module, Interface, Data Reporting

GG 246129

Kit, Repair, Motor Electric

GG 246146

Kit, Wetcup Adapter, 145/180 Cc

GG 246165

Guard, Rac X

GG 246167

Kit, Repair, Case Drain

GG 246168

Kit, Accy, Suction, Gh200

GG 246169

Kit, Accy, Drain

GG 246176

Kit, Repair, Sleeve, Cylinder

GG 246178

Kit, Repair, Nachi Pump

GG 247552

HYDRA-CLEAN SYSTEM, 23:1 WALL MT

Hydra-Clean® 23:1 Wall Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions

GG 247556

Kit, Fluid Manifold, H_Control

GG 247557

Kit, Repair, Visconut 1

GG 247567

Kit, Cable, Harness, Pwr, E30/Xp2

GG 247568

Kit, Repair, O-Rings

GG 247571

Bracket, Brake

GG 247569

Kit, Repair, Seal, 6 Pack

GG 247572

Pedal, Foot Brake

GG 247574

MODULE, PUMP, HYDRAULIC, 60#

Hydraulic Dyna-Star® 10:1 Pump Module - Injector, 60 lb (27 kg). Reservoir, Hydraulic Control, Vent Valve

Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.

For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing Convenient pressure and flow control built-in Hydraulic control module - all your controls in one package for easy system setup and maintenance Dyna-Star 10:1 60 lb (27 kg) pump module – injector – overall height 35.15 in (842 mm)

GG 247575

Reservoir, 60# Grease

GG 247577

Kit, Proportioner, 88

GG 247578

Kit, Seal, Piston, 88

GG 247580

Kit, Seal, Cylinder, 88

GG 247582

Kit, Cylinder, 88

GG 247584

Kit, Piston, 88

GG 247586

Kit, Adapter, Throat, 88

GG 247607

Kit, Activator Plate

GG 247617

Brake, Adjustable

GG 247618

Brake, Adjustable