GRACO INC. S10595
Kit, Lubepro, Valve, 24Vdc
GG 24Y080
KIT, LUBEPRO, VALVE, 24VDC
Graco 24Y080 LubePro Air Valve Installation Kit - 4-Way 24 VDC Air Valve, Bracket, Air lines, Fittings
Application: For use with LubePro Pneumatic Pumps.- 4-way air valve installation kit – 24 VDC air valve, bracket, air lines, fittings
- For Use With: LubePro Pneumatic Pumps
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 10
- Maximum Working Pressure (kPa): 1000
- Maximum Working Pressure (MPa): 1
- Maximum Working Pressure (psi): 150
- Number of Ports: 4
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Type: NPT
KIT, LUBEPRO, VALVE, 110VAC
GG 24Y081
KIT, LUBEPRO, VALVE, 110VAC
LubePro™ Air Valve Installation Kit - 4-Way 110 VAC Air Valve, Bracket, Air lines, Fittings For use with LubePro™ Pneumatic Pumps.4-way air valve installation kit – 110 VAC air valve, bracket, air lines, fittings
REACTOR A-XP1 PROPORTIONER, WHEELS, CYCLE COUNT
GG 24Y165
REACTOR A-XP1 PROPORTIONER, WHEELS, CYCLE COUNT
Reactor A-XP1 Proportioner with Wheels, DataTrakThe Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Quick Knockdown Pumps
- Allows for easy service
- Fast disassembly
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Easy to operate and maintain
Best choice for affordability and durability
Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray pattern
Easy to operate and maintain
REACTOR A-XP1 PROPORTIONER, BARE
GG 24Y164
REACTOR A-XP1 PROPORTIONER, BARE
Reactor A-XP1 Bare ProportionerThe Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Quick Knockdown Pumps
- Allows for easy service
- Fast disassembly
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Easy to operate and maintain
Best choice for affordability and durability
Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray pattern
Easy to operate and maintain
Kit, Gm100 Cover
GG 24Y170
KIT,GM100 COVER
Graco 24Y170 InvisiPac® GM100 Cover Kit
KIT INCLUDES: ADHESIVE, ANAEROBIC [QTY. 1 ], SCREW, FLAT HEAD, M3X6 [QTY. 8 ], PANEL, GM100 SINGLE, RIGHT [QTY. 1 ], PANEL, GM100 SINGLE, LEFT [QTY. 1 ], PANEL, GM100 SINGLE, FRONT [QTY. 1 ], INSULATOR, GM100 SINGLE COVER [QTY. 2 ], SPACER, GM100 SINGLE COVER [QTY. 4 ], LABEL, WARNING, GM100 SINGLE [QTY. 1 ]
Dura-Flo Xl Pump, 45:1, (18 Cm Sst)
GG 24Y208
DURA-FLO XL PUMP,45:1,(18 CM SST)
Graco 24Y208 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 430cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Minimizes service costs
- Improves structural integrity
Dura-Flo 1800 Pump, Xl, 47:1, (18 Cm Cst)
GG 24Y218
DURA-FLO 1800 PUMP,XL,47:1,(18 CM CST)
Graco 24Y218 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 430cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Minimizes service costs
- Improves structural integrity
Dura-Flo 1200 Pump, Xl, 67:1, (12 Cm Sst)
GG 24Y223
Dura-Flo 1200 Pump, Xl, 67:1, (12 Cm Sst) Dura-Flo Xl Pump, 45:1, (18 Cm Sst), Rh
GG 24Y226
Dura-Flo Xl Pump, 45:1, (18 Cm Sst), Rh
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)LH
GG 24Y227
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)LH
47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, MaxLife Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer XL 1000 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- MaxLife coatings on rods and cylinder maximizes wear life
Standard Threaded Coupler -
Replaceable 1 1/2"-11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)RH
GG 24Y228
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)RH
45:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, MaxLife Right Hand Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer XL 1000 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- MaxLife coatings on rods and cylinder maximizes wear life
Standard Threaded Coupler -
Replaceable 1 1/2"-11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
KIT, REPAIR, ROCKER SWITCH
GG 24Y329
KIT, REPAIR, ROCKER SWITCH
Repair Kit, Switch, ProX17, ProX19, ProX21 Stand/Cart Replace a worn or damaged switch with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility Graco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come. Graco Tech Support can further assist with troubleshooting sprayer operation 
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', CA
GG 24Y395
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', CA
High Pressure 50 ft (15 m) Heated Hose with 3/8 in (9.5 mm) Diameter and Xtreme-Wrap Scuff GuardGraco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft hoses with the new Xtreme-Wrap will come with one Joint Protector.
Resistance Temperature Detector (RTD)
- Graco’s latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.
Lubepro H1900 Pump, Ll
GG 24Y499
LUBEPRO H1900 PUMP, LL
Graco 24Y499 LubePro H1900 Horizontal Oil Pump, Low Level - NPT
Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball® pump - the leader in durability and quality for over 50 years.
Application: Single Stroke Oil Pump for Automatic Lubrication- LubePro H1900 is compatible with GL-42 and GL-43 injectors
- Pressure Ratio of 19:1
- H1900 delivers a greater output than competitive models at 3.0 in³ (49.2 cm³) per stroke
- Pneumatic power makes it easy to install into existing air line
- Optional Low Level Detection available, factory installed
- Built with high-quality seals tested to outperform the competition
- Optimally lubricates while your machines are running
- Provides accurate, reliable lubrication for every lube point
- Provides higher lube output and faster lubrication cycle
- Model: LubePro
- Series: H1900
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Application: In-Plant Machinery
- Compatible Material: Oil
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Type: NPT
- Includes: Low Level
- Maximum Air Inlet Pressure (bar): 12.76
- Maximum Air Inlet Pressure (kPa): 1276
- Maximum Air Inlet Pressure (psi): 185
- Maximum Fill Inlet Pressure (bar): 5.52
- Maximum Fill Inlet Pressure (kPa): 552
- Maximum Fill Inlet Pressure (psi): 80
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
- Minimum cST Grade (cST): 40
- Overall Width (cm): 39.4
- Overall Width (in): 15.5
- Overall Width (mm): 394
- Power Type: Pneumatic
Manifold, Mix, Pump, Promix 2Ke Acid
GG 24Y547
Manifold, Mix, Pump, Promix 2Ke Acid
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
GG 24Y549
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
50 ft x 3/8 in Heated Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
Saniforce Eodd Pump, 1040Fg-Ea04As13Ssptptpt21
GG 24Y575
Saniforce Eodd Pump, 1040Fg-Ea04As13Ssptptpt21
SANIFORCE EODD PUMP, 1040FG-EA04AS13SSSPSPEP21
GG 24Y579
SANIFORCE EODD PUMP, 1040FG-EA04AS13SSSPSPEP21
SaniForce 1040e S/S EODD Pump with Al Center, S/S Seats, EPDM O-Rings, Santoprene Balls, Santoprene Diaphragm & 1.5 in Sanitary FlangeThe SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
1 inch (25.4 mm) air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications Low pulsation makes this pump ideal for applications that need smooth flow 5 times more efficient than an air operated diaphragm pump Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Less Noise disturbance thru less than 70 dBa compared to an AODD Mobile cart options available for easy and quick movement Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Saniforce Eodd Pump, 1040Fg-Ea04As14Ssspspep21
GG 24Y583
Saniforce Eodd Pump, 1040Fg-Ea04As14Ssspspep21
SANIFORCE EODD PUMP, 1040FG-ES04AS13SSPTPOPT21
GG 24Y596
SANIFORCE EODD PUMP, 1040FG-ES04AS13SSPTPOPT21
SaniForce 1040e Sanitary S/S EODD Pump with PTFE O-Rings, S/S Seats, PTFE Balls, PTFE/EPDM Overmold Diaphragm & Tri Clamp PortingThe SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
1 inch (25.4 mm) air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications Low pulsation makes this pump ideal for applications that need smooth flow 5 times more efficient than an air operated diaphragm pump Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Less Noise disturbance thru less than 70 dBa compared to an AODD Mobile cart options available for easy and quick movement Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
SANIFORCE EODD PUMP, 1040FG-ES04AS13SSPTPTPT21
GG 24Y597
SANIFORCE EODD PUMP, 1040FG-ES04AS13SSPTPTPT21
SaniForce 1040e Sanitary S/S EODD Pump with S/S Seats, PTFE O-Rings, Santoprene Balls & Diaphragm & 1.5 in Sanitary FlangeThe SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
1 inch (25.4 mm) air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications Low pulsation makes this pump ideal for applications that need smooth flow 5 times more efficient than an air operated diaphragm pump Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Less Noise disturbance thru less than 70 dBa compared to an AODD Mobile cart options available for easy and quick movement Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions