GRACO INC. S10595

GG 248376

FUSION AP GUN, AR2929, AUTO

Graco 248376 Round Fusion Air-Purge Gun with 00 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Auto

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 00 (.029)

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

GG 248377

FUSION AP GUN, AR4242, AUTO

Graco 248377 Round Fusion Air-Purge Gun with 01 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Auto

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 01 (.042)

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

GG 248378

FUSION AP GUN, AR5252, AUTO

Graco 248378 Round Fusion Air-Purge Gun with 02 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Auto

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 02 (.052)

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

GG 248381

FUSION AP GUN, AF2929 FT0438, AUTO

Graco 248381 Fusion Air-Purge Gun, 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port & 8-10 in (203-254 mm) Flat Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Auto

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 00 (.029)

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

• Pattern Size (in): 8-10 in @ 24 in from target

GG 248383

FUSION MP GUN, XR3535 RTM040, AUTO

Graco 248383 Round Pattern Automatic Fusion Mechanical Purge Direct Impingement Gun with 0.040 in (1.0 mm) Ceramic Tip and 0.035 in (0.9 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

• Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
• Long-lasting PolyCarballoy mix module
• Advanced mix module and tip provides superior mixing capabilities

• Model: Fusion MP
• Series: Auto

• Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam

• Fluid Orifice Size (cm): 0.102
• Fluid Orifice Size (in): 0.040
• Fluid Orifice Size (mm): 1.02

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

GG 248385

FUSION MP GUN, XF1818 FTM424, AUTO

Graco 248385 Flat Pattern Automatic Fusion Mechanical Purge Direct Impingement Gun with 0.024 in (0.61 mm) Ceramic Tip and 0.018 in (0.46 mm) Impingement Port

Whether youre spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

• Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
• Long-lasting PolyCarballoy mix module
• Advanced mix module and tip provides superior mixing capabilities

• Model: Fusion MP
• Series: Auto

• Air Inlet Size (cm): 0.3175
• Air Inlet Size (in): 1/8-27
• Air Inlet Size (mm): 3.175
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• Gun Type: Impingement Mix Air Purge Spray Gun
• Gun Weight (g): 1247
• Gun Weight (kg): 1.24
• Gun Weight (lb): 2.75
• Gun Weight (oz): 44

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 242
• Maximum Fluid Working Pressure (MPa): 24.2
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Overall Height (cm): 9.5
• Overall Height (in): 3.75
• Overall Height (mm): 95
• Overall Length (cm): 19.3
• Overall Length (in): 7.6
• Overall Length (mm): 193
• Overall Width (cm): 7.9
• Overall Width (in): 3.1
• Overall Width (mm): 79

• Pattern Size (in): 8
• Pattern Size (mm): 203.2

GG 248430

KIT, REPAIR, MANIFOLD, FLUID

Graco 248430 Fluid Manifold Repair Kit- For ProMix Easy, Xtreme Mix 185and ProMix II Proportioners

GG 248429

KIT, DISPENSE VALVE NDL/SEAT

Graco 248429 Dispense Valve Repair Kit

GG 248440

KIT, REPAIR LOWER HYDRAMIX

GG 248528

GG 248648

GG 248642

GG 248837

GG 248860

GG 248936

GG 248942

FIELDLAZER SPRAYER, S100

Graco 248942 FieldLazer S100 Airless Field Striper

Introduced in 2004, the original FieldLazer striper was the first walk-behind field marker utilizing proven Graco high-pressure airless paint spray technology. It is now recognized by field marking professionals as one of the top walk-behind field marking machines available.

• USER-FRIENDLY OPERATION

  Easy Reach Handlebar Controls

  High-comfort design for greater control and less operator fatigue

  Operator controls are located on the handlebars

• DURABLE PUMP

  Endurance Pump

  Hardened stainless steel rod and cylinder holds up to abrasive materials

  QuikAccess intake for easy cleaning

• RELIABLE POWER

  Honda Engine
  

  Contractor preferred - excellent power and proven reliability

  Easy starting

• PRECISE SPRAY CONTROL

  FieldLazer RAC 5 Tip

  Turn tip 180 degree to clear clogs

• SMOOTHER APPLICATIONS

  Exclusive Tall Wheel Design

  Easily rolls over rough terrain

  Reduces operator fatigue

• COMPACT, USER-FRIENDLY DESIGN

  Fold-Down Handle

  Fits into minivans, SUVs, even pickups with toppers

• FAST AND EASY PAINT HANDLING

  5-Gallon Bucket-Ready

  Eliminates hassle of cleaning tanks or pots

• EASY STENCILING

  No-Tool Gun Removal
  

  Switch for spraying stencils or large solid areas

• Model: FieldLazer
• Series: S100

• Compatible Surfaces: Turf

• Engine Brand: Honda
• Engine Model: GX35

• Features: Adjustable Spray Guides, Disposable Paint Bucket Siphon System, Handlebar Operator Controls

• Fuel Tank Capacity (gal): 0.17
• Fuel Tank Capacity (L): 0.64

• Gun Activation: Manual

• Hopper Volume Capacity (gal): 5
• Hopper Volume Capacity (L): 19

• Includes: SG2 Spray Gun, FieldLazer RAC 5 421 Spray Tip, RAC 5 Guard, 3/16 in x 25 ft BlueMax II Airless Hose, TSL, 4 oz

• Maximum Sound Pressure Level (dB(A)): 87

• Maximum Tip Size (cm): 0.0533
• Maximum Tip Size (in): 0.021
• Maximum Tip Size (mm): 0.533

• Maximum Working Pressure (bar): 62
• Maximum Working Pressure (kPa): 6200
• Maximum Working Pressure (psi): 900

• Number of Colors: One Color

• Number of Guns: 1
• Number of Hoppers: 1
• Number of Pumps: 1

• Power Source: Gas

• Pump Type: Airless Piston Powered

GG 248952

GG 248979

GG 248969

GG 249042

KIT, REPAIR, BRUSH

Graco 249042 Pro Motor Brush Paint Sprayer Kit for Pro210ES

Replace your motor brushes with genuine Graco parts. Kit comes assembled for easy replacement. For Pro 210ES cart or stand model sprayer. Refer to the parts manual for your sprayer to ensure part compatibility

• Sprayers motor is not turning, it might be due to brushes wearing away
• Graco tech support can further assist with troubleshooting sprayer operation
• For use with Pro210ES airless paint sprayer stand, 16D163 or cart 17C305

• For Use With: Pro210ES Stand, Pro210ES Cart

GG 249051

KIT, REPAIR, LINE, DRAIN

Graco 249051 210ES Drain Tube Paint Sprayer Kit for 210ES Stand

Replace your sprayers paint covered or worn out drain line. Keep the suction set - replacement drain line only. For Pro 210ES stand only. Refer to the parts manual for your sprayer to ensure part compatibility

• Coating buildup or brittleness may cause leakage
• Graco tech support can further assist with troubleshooting sprayer operation
• For use with 210ES stand, 16D163

• For Use With: Pro210ES Stand, Pro210ES Cart

GG 249080

LINELAZER HOSE, CPLD, 1/4" X 50'

Graco 249080 Coupled Hose- 1/4 in. Diameter, 50 ft. Long

• Model: Graco
• Series: Hose

• Hose Length (cm): 1524
• Hose Length (ft): 50
• Hose Length (in): 600
• Hose Length (m): 15.2
• Hose Length (mm): 15200

• Inside Diameter (cm): 0.635
• Inside Diameter (in): 1/4
• Inside Diameter (mm): 6.35

• Material: Nylon

• Maximum Working Pressure (bar): 227
• Maximum Working Pressure (kPa): 22700
• Maximum Working Pressure (MPa): 22.7
• Maximum Working Pressure (psi): 3300

GG 249115

GG 249121

GG 249123

KIT, REPAIR, PACKING

Graco 249123 Stainless Steel Check Balls Pump Repair Kit

Replace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility

• Graco Tech Support can further assist with troubleshooting sprayer operation

GG 249125

GG 249132

DIFFUSER, ASSY

Graco 249132 Diffuser Assembly for G15 Spray Gun w/ Plastic Seat

GG 249133

DIFFUSER, ASSY,H.P.

Graco 249133 G15/G40 Diffuser, assy

• Compatible Material: Sealants, Adhesives

GG 249134

KIT, RETAINING RING

Graco 249134 Retaining Ring Assembly for Automatic G40 Air-Assisted Spray Guns

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

GG 249135

VALVE, FAN,ASSY

Graco 249135 G15/ G40 AA Series Spray Gun Fan Valve

GG 249149

GG 249179

GG 249180

AIR CAP, ASSY

Graco 249180 AA Series Spray Gun Air Cap

GG 249189

KIT, REPAIR, PUMP, CERAMIC BALL

Graco 249189 Graco Pump Repair Kit with Ceramic Check Balls

Replace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility

• Graco Tech Support can further assist with troubleshooting sprayer operation

GG 249232

GG 249317

GG 249421

GG 249422

KIT, GUN,REPAIR

Graco 249422 Seal Repair Kit, includes replacement o-rings, gasket, u-cup, air valve assembly, and seal installation tool

GG 249423

GG 249456

KIT, NEEDLE,SEAT,G40

Graco 249456 Carbide Seat Repair Kit, includes replacement carbide seat, seat gasket, and seat nut

GG 249478

GUARD, RAC,ALPHA G40

GG 249323

GG 249529

FUSION AP GUN, WIDE RND 01

Graco 249529 Wide Round Fusion Air-Purge Gun with 01 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Wide

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.099
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 0.99

• Gun Type: Air Purge Gun
• Gun Weight (g): 1130
• Gun Weight (kg): 1.1
• Gun Weight (lb): 2.5
• Gun Weight (oz): 40

• Impingement Port Size (in): 0.039
• Impingement Port Size (mm): 0.99

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 01 (.042)

• Overall Height (cm): 20.6
• Overall Height (in): 8.1
• Overall Height (mm): 206
• Overall Length (cm): 19.1
• Overall Length (in): 7.5
• Overall Length (mm): 191
• Overall Width (cm): 8.4
• Overall Width (in): 3.3
• Overall Width (mm): 84

• Pattern Size (in): 16 in @ 24 in from target

GG 249514

THERM-O-FLOW GUN, HOT MELT, BOTTOM FEED

Graco 249514 Therm-O-Flo Bottom Feed Manual Gun, 240V

Hot melt dispense gun provides ergonomic, easy-trigger actuation for high pressure, high flow sealant and adhesive applications.

• Provides accurate dispense control for Therm-O-Flow Systems

  Provides precise proportional control and variable dispense volume with unique tapered needle valve design

  Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control

  Rugged construction - durable, lightweight anodized aluminum body

  Ergonomic, easy-trigger actuation

  Designed for easy service - minimal maintenance and downtime

  Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)

  • Precise temperature control from PID control panel
  • Piston-actuated ball and seat design for positive shut off
  • Rugged all metal construction

  
  

  • Model: Therm-O-Flow
  • For Use With: Therm-O-Flow
  • Maximum Fluid Pressure (bar): 245
  • Maximum Fluid Pressure (kPa): 2450
  • Maximum Fluid Pressure (MPa): 24.5
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Pressure (bar): 245
  • Maximum Fluid Pressure (kPa): 2450
  • Maximum Fluid Pressure (MPa): 24.5
  • Maximum Fluid Pressure (psi): 3500

GG 249586

REACTOR HEATED HOSE, 3', 1/4, 2000 PSI

Graco 249586 3 ft x 1/4" Whip Hose, 2000 psi, Without Cable, Mesh Scuff, Reactor 1 & 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life

  
  

  • Model: Reactor 1
  • Series: Mesh Scuff
  • Compatible Sprayer: Reactor 1 & 2
  • For Use With: Plural Component Proportioners
  • Hose Heating Type: External Heated
  • Hose Inside Diameter (in): 1/4
  • Hose Inside Diameter (mm): 6.35
  • Hose Length (ft): 3
  • Hose Length (m): 0.9
  • Inside Diameter (in): 0.25
  • Maximum Working Pressure (bar): 138
  • Maximum Working Pressure (kPa): 13800
  • Maximum Working Pressure (MPa): 13.8
  • Maximum Working Pressure (psi): 2000

GG 249513

THERM-O-FLOW GUN,HOT MELT,TOP W/SWITCH

Graco 249513 Manual Top Feed Electric Hot Melt Dispense Gun with Switch

Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.

Application: For applying hot melt materials.

• Provides accurate dispense control for Therm-O-Flow Systems

  • Provides precise proportional control and variable dispense volume with unique tapered needle valve design
  • Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
  • Rugged construction - durable, lightweight anodized aluminum body
  • Ergonomic, easy-trigger actuation
  • Designed for easy service - minimal maintenance and downtime
  • Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)

• Precise temperature control from PID control panel

• Piston-actuated ball and seat design for positive shut off

  Light trigger pull

• Rugged all metal construction

• Model: Therm-O-Flow

• Compatible Material: Sealants, Adhesives

GG 249588

REACTOR HEATED HOSE, 50', 3/8, W/O CBL, 3500P

Graco 249588 50 ft x 3/8 in Heated Hose, 3500 psi, Without Cable, No Scuff, Reactor 1 & 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life

  
  

  • Model: Reactor 1
  • Series: No Scuff
  • Compatible Sprayer: Reactor 1 & 2
  • For Use With: Plural Component Proportioners
  • Hose Heating Type: External Heated
  • Hose Inside Diameter (in): 3/8
  • Hose Inside Diameter (mm): 9.525
  • Hose Length (ft): 50
  • Hose Length (m): 15.2
  • Inside Diameter (in): 3/8
  • Maximum Working Pressure (bar): 241
  • Maximum Working Pressure (kPa): 24100
  • Maximum Working Pressure (MPa): 24.1
  • Maximum Working Pressure (psi): 3500

GG 249810

GG 249512

THERM-O-FLOW GUN,HOTMELT,BOTTOM W/SWITCH

Graco 249512 Precision Hot Melt Dispense Gun with Switch

Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.

Application:

For applying hot melt materials.

• Provides accurate dispense control for Therm-O-Flow Systems

  • Provides precise proportional control and variable dispense volume with unique tapered needle valve design
  • Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
  • Rugged construction - durable, lightweight anodized aluminum body
  • Ergonomic, easy-trigger actuation
  • Designed for easy service - minimal maintenance and downtime
  • Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)

• Precise temperature control from PID control panel

• Piston-actuated ball and seat design for positive shut off

  Light trigger pull

• Rugged all metal construction

• Model: Therm-O-Flow

GG 249764

GG 249855

GG 249598

GG 249572

REACTOR E-10 PROPORTIONER, CMPLT, 240V, 1X16A, HTD

Graco 249572 Reactor E-10 Heated Proportioner with 20 A Circuit, 240 V

Gracos Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

• Small size
  

  Ideal for on-site portability and hard-to-reach areas

• Cost Savings
  

  One-person operation saves time and money

• Extent your spray business
  

  Use as an add-on to your existing spray business

• Material savings
  

  Saves 30% on material costs compared to disposable foam systems

• Electric power
  

  Low draw and plugs into standard outlets

• Single Knob Operation
  

  Intuitive start, stop and digital temperature display with single knob operation

• Easily balancing
  

  Pressure balance valves give you quick and easy balancing of system pressures

  Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern

• Easy-to-service fluid section
  

  Reduces maintenance and increases productivity

• Electric motor
  

  Improves performance and reduces operating costs

• Spray on-ratio
  

  Self-contained translucent material tanks show you that you are spraying on-ratio

• Pre-heat material
  

  Heaters and hose give you up to 2000 watts to pre-heat circulating material

• Model: Reactor
• Series: E-10

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 20
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Hose Package: No Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Hose Length (ft): 35
• Maximum Hose Length (m): 94.5

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall Depth (mm): 762

• Overall Height (cm): 111.8
• Overall Height (in): 44
• Overall Height (mm): 1118
• Overall Width (cm): 67.3
• Overall Width (in): 26.5
• Overall Width (mm): 673

• Power Rating (HP): 5.10

GG 249592

GG 249877

DIFFUSER, ASSY,RAC

Graco 249877 Diffuser Assembly for Flat Tip to RAC Tip Air Cap Conversion Kit

• Compatible Material: Sealants, Adhesives

GG 24A219

CHANNEL, MOUNTING, DUAL ARM 1 REEL

Graco 24A219 XD Series Open Reel Mounting Channel - Accommodates 1 Reel

• Number of Pieces: 9

GG 249526

FUSION AP GUN, AF5252 FTM979

Graco 249526 Round Fusion Air-Purge Stud Wall Gun with 0.070 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Specialty

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 04 (.070)

• Pattern Size (in): 22 in @ 24 in from target

GG 249992

CHECK-MATE PUMP,RECIP,DISPL (18 SST)

Graco 249992 Stainless Steel 18 cm Displacement Pump

• Model: Check-Mate

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

GG 24A225

GG 24A217

KIT, ACCESSORY

Graco 24A217 SD 10 Oil Reel Enclosure - White

• Number of Pieces: 22

GG 24A251

KIT, REPAIR, VEE, 25CC

Graco 24A251 Standard Seal Repair Kit for Merkur LW025A

GG 24A252

KIT, REPAIR,VEE, 50CC

Graco 24A252 Standard Seal Repair Kit for Merkur LW050A

GG 24A220

CHANNEL, MOUNTING, DUAL ARM 2 REEL

Graco 24A220 Open Reel Mounting Channel (Accommodates 2 Reels)

• Number of Pieces: 17

GG 24A085

APPLICATOR,L-RIM:10/14,MIXHEAD,W/CALIB

GG 249617

GH SPRAYER, 833, COMPLETE

Graco 249617 GH 833 Gas Hydraulic Sprayer, Complete

The GH 833 is the preferred choice for high production professional contractors who spray the wide range of materials. This jobsite-proven workhorse is the answer when you demand ruggedness, performance and value.

• Honda Engine

  390 cc (13 HP) engine with integrated fuel tank to deliver maximum performance

  Contractor preferred engine with Oil Alert

• Heavy-Duty Hydraulic System

  Faster, more responsive changeover

  O-ring sealed to eliminate leaks

  High-precision pressure control

  No hydraulic reset button needed

  Durable hydraulic lines for long life

• Heavy-Duty Cooling System

  Large 4 gallon hydraulic reservoir

  Return line hydraulic filter extends life

  No special hydraulic fluid needed

  Proven cooler and blower system

  Easy to use drain plug

• MaxLife Endurance Pump

  Proven design and performance

  Only 16 cycles per gallon (4.2 cycles per liter)

  Exclusive MaxLife rod and sleeve delivers unmatched durability and life - Graco's best

  Exclusive QuikChange Pump System and QuikAccess Intake Valve eliminates downtime

• Flow-Through Filter System

  Inside/out design eliminates clogged filters

  Eliminates tip clogs

• Ready-To-Spray Complete System

  Configured with 50 feet of pressure-rated hose, gun, tips, and all the fittings you will need

• Model: GH
• Series: 833

• Compatible Material: Acrylics, Block Filler, Coal Tar, Contact Cement, Elastomerics, Enamel, Epoxies, Fibered Aluminum Emulsion, Fibered Asphalt Emulsion, Mastics, Non-Fibered Aluminum Emulsion, Non-Fibered Asphalt Emulsion, Paint, Polyester, Polyurethane, Primer, Texture Mud, Waterproofing
• Compatible Replacement Pump: 287834

• Control Type: N/A

• Engine Brand: Honda
• Engine Size (HP): 13

• Fluid Inlet Size (in): 1-1/2 to 11-1/2
• Fluid Inlet Thread Type: MNPT

• Fluid Outlet Size (in): 1 to 11-1/2
• Fluid Outlet Thread Type: FNPT

• Frame Configuration: Cart

• Includes: Silver Plus Gun, RAC X 517 Spray Tip, RAC X 655 Spray Tip, RAC X Guard, 3/8 in x 50 ft BlueMax II HP Airless Hose, 1/4 in x 3 ft BlueMax II HP Airless Whip Hose

• Material Application: Paints, Primers

• Maximum Flow Rate (GPM): 4.0
• Maximum Flow Rate (L/min): 15.1

• Maximum Hose Length (ft): 50
• Maximum Hose Length (m): 15

• Maximum Sound Pressure Level (dB(A)): 91

• Maximum Tip Size (in): 0.065
• Maximum Tip Size Gun 2 (in): 0.046
• Maximum Tip Size Gun 3 (in): 0.037
• Maximum Tip Size Gun 4 (in): 0.032
• Maximum Tip Size Gun 5 (in): 0.029

• Maximum Tip Size Gun 6 (in): 0.026

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Motor Type: Hydraulic Motor

• Number of Guns: 6

• Outlet Paint Filter: 60 Mesh Stainless Steel Screen

• Power Rating (cc): 390
• Power Rating (HP): 13
• Power Rating (kW): 9.7
• Power Rating (W): 9694
• Power Source: Gas Hydraulic
• Pressure Control Type: Pressure Control Knob

• Product Type

GG 249849

CONTROL, FLOW, REGULATOR

Graco 249849 Flow Control Module with Integrated Air-Operated Fluid Regulator

• Compatible Material: Solventborne

GG 249585

GG 249571

REACTOR E-10 PROPORTIONER, CMPLT, 240V, 2X10A, HTD

Graco 249571 Reactor E-10 Heated Proportioner with (2) 10 A Circuits, 240 V

Gracos Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

• Small size
  

  Ideal for on-site portability and hard-to-reach areas

• Cost Savings
  

  One-person operation saves time and money

• Extent your spray business
  

  Use as an add-on to your existing spray business

• Material savings
  

  Saves 30% on material costs compared to disposable foam systems

• Electric power
  

  Low draw and plugs into standard outlets

• Single Knob Operation
  

  Intuitive start, stop and digital temperature display with single knob operation

• Easily balancing
  

  Pressure balance valves give you quick and easy balancing of system pressures

  Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern

• Easy-to-service fluid section
  

  Reduces maintenance and increases productivity

• Electric motor
  

  Improves performance and reduces operating costs

• Spray on-ratio
  

  Self-contained translucent material tanks show you that you are spraying on-ratio

• Pre-heat material
  

  Heaters and hose give you up to 2000 watts to pre-heat circulating material

• Model: Reactor
• Series: E-10

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 10
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Hose Package: No Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Hose Length (ft): 35
• Maximum Hose Length (m): 94.5

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall Depth (mm): 762

• Overall Height (cm): 111.8
• Overall Height (in): 44
• Overall Height (mm): 1118
• Overall Width (cm): 67.3
• Overall Width (in): 26.5
• Overall Width (mm): 673

• Power Rating (HP): 5

GG 24A155

KIT,REPAIR,SHAFT AND BEARING

Graco 24A155 Shaft and Bearing Repair Kit- for Triton 308 Diaphragm Pumps

GG 24A253

KIT, REPAIR,VEE, 75CC

Graco 24A253 Standard Seal Repair Kit for Merkur LW075A

GG 24A226

GG 24A254

KIT, REPAIR,VEE, 100CC

Graco 24A254 Standard Seal Repair Kit for Merkur LW100A

GG 24A255

KIT, REPAIR,VEE, 125CC

Graco 24A255 Standard Seal Repair Kit for Merkur LW125A

GG 24A256

KIT, REPAIR,VEE, 150CC

Graco 24A256 Standard Seal Repair Kit for Merkur LW150A

GG 24A281

GG 24A261

GG 24A264

GG 24A271

GG 24A263

GG 24A283

GG 24A352

GG 24A354

GG 24A351

GG 24A366

KIT, MOTOR,PILOT VALVE

GG 24A413

GG 24A438

GG 24A536

KIT, SEALS, AIR VALVE, MEDIUM

Graco 24A536 Air Valve Seal Kit

GG 24A445

GG 24A538

KIT, MECH,AIR VALVE MEDIUM

Graco 24A538 Air Valve Repair Kit, for Graco Air Valve Models 24A352, 24A354, and 262608

Always install a new gasket when installing a new air valve

GG 24A543

GG 24A541

GG 24A547

KIT, SEALS, MOTOR 6.0

Graco 24A547 Air Motor Seal Kit

GG 24A546

GG 24A551

KIT, SEALS MOTOR, 7.5

Graco 24A551 Air Motor Seal Kit

GG 24A549

GG 24A576

GG 24A578

GG 24A587

KIT, FLUID FILTER

Graco 24A587 Pump Outlet Fluid Filter, Stainless Steel, 60 mesh (250 micron), 5000 psi (350 bar)

GG 24A621

GG 24A619