Airpower | GRACO INC. S10595 branded products

KIt, Emptty, Cartridgee, No label

GG 24P862

KIt, Emptty, Cartridgee, No label

$49.10

Manifold, Kit, Base (Replaces SA914001)

GG 24P867

Manifold, Kit, Base (Replaces SA914001)

$375.00

Fusion MP Gun, Manual 2K

GG 24R021

FUSION MP GUN, MANUAL 2K

Manual 2K Dispense Gun

Graco's 2K Manual Dispense Gun is a hand-operated dispensing gun making joint and crack fill floor maintenance easy with a single handle that starts and stops A and B materials simultaneously. Compatible with Reactor E-8p for Flooring and the unheated Reactor E-10.

For joint and crack fill applicationsEasy to useDoes not require compressed air to operateUses a static mixer for proper mixing of 1:1 ratio materialsUses restrictors to help balance chemical pressuresUses check valves to help prevent material cross-over

$2,350.00

Kit, Board, Daughter

GG 24R042

Kit, Board, Daughter

$649.00

SaniForce Pump, 2:1, Std. Length, UHMW

GG 24R046

SANIFORCE PISTON PUMP, 2:1, STD LGTH, UHMW

2:1 Ratio SaniForce Standard Drum Length Double Ball Piston Pump with UHMWPE & FKM Packings

Easily transfer low to medium viscosity food and personal care materials up to 50,000 cps out of drums and totes. Graco's SaniForce 2:1 piston pump utilizes proven Graco air motor technology and smart sanitary design. The pump is extremely portable, weighing between 24 lb (10.8 kg) for the standard drum length and 26 lb (11.7 kg) for the long length. Plus, it fits through a standard bung hole.

Quick Knockdown Sanitary Piston Pump for Food and Personal Care Applications

SaniForce 2:1 Sanitary Piston Pump:

Flow rates range from 1.5 gpm (5.7 lpm) at 60 cpm, up to 2.5 gpm (9.5 lpm) at 100 cpm
Quick disconnect clamps for easy disassembly
Fluid transfer and supply of materials up to 50,000 cps
Suitable to pump products such as: fruit juice concentrates, creamy candy fillings, ice cream variegates, and cosmetics

SaniForce 2:1 Air Motor:

Removable, wash down safe, FDA-compliant shroud lets you easily access the air valve
Simple knuckle joint design for easy removal of air motor from lower

Easy Mounting:

SaniForce 2:1 pump fits through standard bung hole
FDA-compliant bung adapter accessory available for easy mounting

$5,860.00

Saniforce Double Ball Piston Drum Pump With Ptfe Packing And Bung Adapter

GG 24R047

SANIFORCE PISTON PUMP, 2:1, STD LGTH, PTFE

2:1 Ratio SaniForce Standard Drum Length Double Ball Piston Pump with PTFE & FKM Packings

Easily transfer low to medium viscosity food and personal care materials up to 50,000 cps out of drums and totes. Graco's SaniForce 2:1 piston pump utilizes proven Graco air motor technology and smart sanitary design. The pump is extremely portable, weighing between 24 lb (10.8 kg) for the standard drum length and 26 lb (11.7 kg) for the long length. Plus, it fits through a standard bung hole.

Quick Knockdown Sanitary Piston Pump for Food and Personal Care Applications

SaniForce 2:1 Sanitary Piston Pump:

Flow rates range from 1.5 gpm (5.7 lpm) at 60 cpm, up to 2.5 gpm (9.5 lpm) at 100 cpm
Quick disconnect clamps for easy disassembly
Fluid transfer and supply of materials up to 50,000 cps
Suitable to pump products such as: fruit juice concentrates, creamy candy fillings, ice cream variegates, and cosmetics

Easy Mounting:

SaniForce 2:1 pump fits through standard bung hole
FDA-compliant bung adapter accessory available for easy mounting

$6,130.00

Kit, Pressure, Sensor

GG 24R050

KIT,PRESSURE,SENSOR

Graco 24R050 Pressure Transducer Kit for E-Flo DC Motors

$1,050.00

WIRE SCREEN INLET FILTER KIT

GG 24R369

WIRE SCREEN INLET FILTER KIT

$71.00

Kit, Pins, Retainer, San 2:1

GG 24R195

Kit, Pins, Retainer, San 2:1

$137.00

Reactor Unheated Hose 50ft 3/8in No Air Unin

GG 24R137

Reactor Unheated Hose 50ft 3/8in No Air Unin

$1,465.00

LSR (Liquid, Silicone, Rubber) Hose, Assembly, " A", 3/4X84

GG 24R374

LSR (Liquid, Silicone, Rubber) Hose, Assembly, " A", 3/4X84

$1,280.00

Kit, Cutter Head Assy

GG 24R482

KIT,CUTTER HEAD ASSEMBLY

KIT INCLUDES: HEAD, BASE, CUTTER ASSEMBLY [QTY. 1], HEAD, CLAMP, CUTTER ASSEMBLY [QTY. 1], SCREW, SET, CPPT, #8, 3/8, SST, PATCH [QTY. 2], TOOL, WRENCH, HEX [QTY. 1]

Catalyst Inlet Size (in): 1/4
Catalyst Inlet Thread Gender: Female
Catalyst Inlet Thread Type: NPT

$260.00

Light Tower Kit

GG 24R226

Light Tower Kit

$646.00

Kit, Blade, Cutter

GG 24R606

KIT, BLADE, CUTTER

100-Pack of Cutter BladesKIT INCLUDES: BLADE, CUTTER [QTY. 100 ]

$31.50

Module, Fiber To Serial Converter

GG 24R086

MODULE,FIBER TO SERIAL CONVERTER

Graco 24R086 Fiber/Serial Converter Kit for E-Flo DC Motors

Coating Type: Waterborne

Compatible Paint Type: Epoxy, High Solids, Lacquers, Latex, Plural Component Materials, Polyurethanes, Urethanes, UV Curing, Varnishes, Waterborne

$3,470.00

Kit, Restrictor, Assorted Sizes

GG 24R804

Kit, Restrictor, Assorted Sizes

$310.00

Exactablend Agp System, 100Cc/100Cc, Boom

GG 24R809

EXACTABLEND AGP SYSTEM, 100CC/100CC, BOOM

55/5 gal (200/19 L) AGP-S100 Silicone Machine with Boom

The Graco ExactaBlend AGP (Advanced Glazing Proportioner) provides on-ratio dispensing of two-component sealants and adhesives for curtainwall, insulating glass and other applications. The variable ratio ExactaBlend AGP offers advanced technologies at an affordable price.

Precise application of silicone materials in insulating glass or structural glazing applications is critical for delivering superior adhesion, durability and leak-free performance.Advanced pumping technology creates a better, more consistent bead â€“ which results in reduced rework and less wasted material.Real-time ratio assurance means less waste, more profits

Provides automatic shut-down if off-ratio conditions occur
Cuts material waste and reduces rework for a healthier bottom line

Optimal mix for quality assurance

Ultimately reduces the chance of seal failure on insulating glass
Results in better quality end product

Easy to operate

Quick and easy setup â€“ operator simply enters the ratio setting
Easy to switch ratio settings

Reduces wasted material

Base purge is fast, clean and easy with the simple touch of a button

Optional data download provides reports on ratio, flow rate and material usage

A & B material usage
Flow rate
Alarm events
Ratio

$55,910.00

KIT, OUTLET, 1, XD40

GG 24R056

KIT, OUTLET, 1, XD40

$245.50

Agp Hose, Assembly, #1

GG 24R832

AGP HOSE,ASSY,#1

Graco 24R832 #1 5/8 in x 120 in Base Hose Package with 2 1/8 in x 60 in Catalyst Hoses

Hose kit #1 - Base hose plus catalyst hoses of 3 mm (1/8 in) and 3 mm (1/8 in) diameter.

$3,450.00

KIT, INLET, 1, XD, REEL

GG 24R067

KIT, INLET, 1, XD, REEL

$251.50

Kit, Lower, Ptfe, Short, San 2:1

GG 24R191

Kit, Lower, Ptfe, Short, San 2:1

$4,760.00

Kit, Software, All, Invisipack

GG 24R324

Kit, Software, All, Invisipack

$199.00

Cable, Can Power, M12 Fem, Pigtail

GG 24R735

Cable, Can Power, M12 Fem, Pigtail

$207.50

Airpro Gun, Wb, Compliant, .042

GG 288971

AIRPRO GUN, WB, COMPLIANT, .042

Graco 288971 AirPro Air Spray Pressure Feed Gun, Compliant, 0.042 inch (1.1 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Waterborne
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Wb, Compliant, .055

GG 288972

AIRPRO GUN, WB, COMPLIANT, .055

Graco 288972 AirPro Air Spray Pressure Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Waterborne
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Ceramic, HVLP, .059

GG 288976

AIRPRO GUN, CERAMIC, HVLP, .059

Graco 288976 AirPro Air Spray Pressure Feed Gun, HVLP, 0.059 inch (1.5 mm) Nozzle, for High Wear Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: High Wear
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Ceramics, Enamel, High Solids, Metallics, Solvent borne, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.15
Fluid Orifice Size (in): 0.059
Fluid Orifice Size (mm): 1.5

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Gun Tip, .051

GG 288984

Kit, Gun Tip, .051

$55.25

Airpro Gun, Conv, .070

GG 289003

AIRPRO GUN, CONV, .070

Graco 289003 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Spatter, HVLP, .042

GG 288985

AIRPRO GUN, SPATTER, HVLP, .042

Graco 288985 AirPro Air Spray Pressure Feed Gun, HVLP, 0.042 inch (1.1 mm) Nozzle, Spatter Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Spatter
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Latex, Solvent borne, Spatter, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, HVLP, .055

GG 289005

AIRPRO GUN, HVLP, .055

Graco 289005 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$775.00

Airpro Gun, Conv, .055

GG 289002

AIRPRO GUN, CONV, .055

Graco 289002 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, HVLP, .070

GG 289031

AIRPRO GUN, SIPHON, HVLP, .070

Graco 289031 AirPro Air Spray Siphon Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$966.00

Airpro Gun, Assembly, HVLP, Gravity w/Cup

GG 289015

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289015 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Comp, Gravity, Pps, .055

GG 289026

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .055

Graco 289026 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, Comp, .070

GG 289033

AIRPRO GUN, SIPHON, COMP, .070

Graco 289033 AirPro Air Spray Siphon Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$966.00

Airpro Gun, Assembly, Conv, Gravity, Pps, .055

GG 289020

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055

Graco 289020 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, HVLP, .055

GG 289030

AIRPRO GUN, SIPHON, HVLP, .055

Graco 289030 AirPro Air Spray Siphon Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$966.00

Airpro Gun, Assembly, HVLP, Gravity, Pps, .055

GG 289023

AIRPRO GUN, ASSY, HVLP, GRAV, PPS, .055

Graco 289023 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Air Valve Assembly

GG 289038

Kit, Air Valve Assembly

$33.30

Airpro Gun, Assembly, Comp, Gravity, Pps, .070

GG 289027

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070

Graco 289027 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Comp, Gravity w/Cup

GG 289018

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289018 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Handle Assy, Pressure

GG 289016

Kit, Handle Assy, Pressure

$314.00

Airpro Gun, Assembly, HVLP, Gravity w/Cup

GG 289014

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289014 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Comp, Gravity w/Cup

GG 289017

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Comp, .070

GG 289009

AIRPRO GUN, COMP, .070

Graco 289009 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Conv, Gravity, Pps, .070

GG 289021

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .070

Graco 289021 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, HVLP, .070

GG 289006

AIRPRO GUN, HVLP, .070

Graco 289006 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, Conv.055

GG 289028

AIRPRO GUN, SIPHON, CONV.055

Graco 289028 AirPro Air Spray Siphon Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$654.00

Airpro Gun, Comp, .055

GG 289008

AIRPRO GUN, COMP, .055

Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Conv, Gravity w/Cup

GG 289012

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Automotive, HVLP, .047

GG 289035

AIRPRO GUN, AUTOMOTIVE, HVLP, .047

Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Automotive
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, Conv, .070

GG 289029

AIRPRO GUN, SIPHON, CONV, .070

Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$639.00

Airpro Gun, Automotive, Compliant, .047

GG 289037

AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

Graco 289037 AirPro Air Spray Pressure Feed Gun, Compliant, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Automotive
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Repair, Seal, 1500 Cc

GG 24F662

KIT, REPAIR, SEAL, 1500 CC

Graco 24F662 Complete Pump Repair Kit for 1500 cc Lower Pumps

$714.00

Plate, Follow, 120 Lb

GG 24F902

Plate, Follow, 120 Lb

$287.00

Plate Follow, 400 Lb

GG 24F903

Plate Follow, 400 Lb

$360.00

Cart, 180 Kg

GG 24F915

CART, 180 KG

LD Series 50:1 Grease Pump Drum Cart with Pneumatic Wheels for 400 lb. Drums, Includes Chain for Securing Drum to Cart

Drum cart with pneumatic wheels for 400 lb drums

Includes chain for securing drum to cart

$662.00

Bracket, Wall Mount

GG 24F910

Bracket, Wall Mount

$173.00

LD Series Oil Pump, 5:1, Universal, Npt

GG 24G588

LD SERIES OIL PUMP, 5:1, UNIVERSAL, NPT

LD Series 5:1 Universal Oil Pump with Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

$1,125.00

Hose, Cpld, 1/8", 3000 psi, 35 ft

GG 24G429

Hose, Cpld, 1/8", 3000 psi, 35 ft

$695.00

Trabon MSP Divider Valve - 8 Section Base Plate Assemblies - NPSF

GG 24G490

PLATE, BASE, 8 SECTION, MSP NPSF

TrabonÂ® MSP Divider Valve - 8 Section Base Plate Assemblies - NPSF

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valveâ€“and is still the best!

For use with mobile, industrial, food and beverage, wind, and many more applications.Quick change valve sections can be removed from the base assembly without disturbing any lube linesâ€“minimizing labor cost and maximizing your machine uptime.Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting.Built-in outlet check valves ensure accurate lube delivery every time

$411.00

Kit, Repair, Pump, 5 to 1 Double Ball

GG 24G551

KIT, REPAIR, PUMP, 5:1 SANITARY

Lower Repair Kit 5:1 Double Ball

$668.00

LD Series Oil Pump, Assembly, 5:1, Npt

GG 24G594

LD SERIES OIL PUMP, ASSEMBLY, 5:1, NPT

LDâ„¢ 5:1 Oil Pump with 55 Gallon (200 Liter) Steel Down Tube and Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.Includes 200L (55gal) drum down tube

$1,300.00

LD Series Oil Pump, 3:1, Universal, Npt

GG 24G576

LD SERIES OIL PUMP, 3:1, UNIVERSAL, NPT

LD Series 3:1 Universal Oil Pump with Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

$925.00

Plate, Base, 6 Section, MSP NPSF

GG 24G488

PLATE, BASE, 6 SECTION, MSP NPSF

TrabonÂ® MSP Divider Valve - 6 Section Base Plate Assemblies - NPSF

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valveâ€“and is still the best!

For use with mobile, industrial, food and beverage, wind, and many more applications.Quick change valve sections can be removed from the base assembly without disturbing any lube linesâ€“minimizing labor cost and maximizing your machine uptime.Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting.Built-in outlet check valves ensure accurate lube delivery every time

$338.00

Kit, Repair, Pump, 6:1 Sanitary

GG 24G548

Kit, Repair, Pump, 6:1 Sanitary

$282.50

Plate, Base 4 Section, MSP NPSF

GG 24G486

PLATE, BASE, 4 SECTION, MSP NPSF

TrabonÂ® MSP Divider Valve - 4 Section Base Plate Assemblies - NPSF

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valveâ€“and is still the best!

For use with mobile, industrial, food and beverage, wind, and many more applications.Quick change valve sections can be removed from the base assembly without disturbing any lube linesâ€“minimizing labor cost and maximizing your machine uptime.Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting.Built-in outlet check valves ensure accurate lube delivery every time

$273.00

Plate, Base 3 Section

GG 24G485

PLATE, BASE, 3 SECTION, MSP NPSF

TrabonÂ® MSP Divider Valve - 3 Section Base Plate Assemblies - NPSF

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valveâ€“and is still the best!

For use with mobile, industrial, food and beverage, wind, and many more applications.Quick change valve sections can be removed from the base assembly without disturbing any lube linesâ€“minimizing labor cost and maximizing your machine uptime.Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting.Built-in outlet check valves ensure accurate lube delivery every time

$240.50

Plate, Base 5 Section, MSP NPSF

GG 24G487

PLATE, BASE, 5 SECTION, MSP NPSF

TrabonÂ® MSP Divider Valve - 5 Section Base Plate Assemblies - NPSF

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valveâ€“and is still the best!

For use with mobile, industrial, food and beverage, wind, and many more applications.Quick change valve sections can be removed from the base assembly without disturbing any lube linesâ€“minimizing labor cost and maximizing your machine uptime.Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting.Built-in outlet check valves ensure accurate lube delivery every time

$305.00

LD 5:1 Oil Pump with 275 Gallon (1040 Liter) Steel Down Tube and Bung Adapter - NPT

GG 24G597

LD SERIES OIL PUMP, ASSEMBLY, 5:1, NPT

LDâ„¢ 5:1 Oil Pump with 275 Gallon (1040 Liter) Steel Down Tube and Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.Includes 1040 liter (275gal) tote down tube

$1,350.00

Hose, Cpld, 1/4, Nylon, 40 ft

GG 24G434

Hose, Cpld, 1/4, Nylon, 40 ft

$290.00

6:1 RATIO SANIFORCE BIN LENGTH DOUBLE BALL PISTON PUMP

GG 24F942

SANIFORCE PISTON PUMP, 6:1 DB BL

6:1 Ratio SaniForce Bin Length Double Ball Piston Pump

Graco's SaniForce 6:1 quick knockdown piston pumps are constructed of 300 series stainless steel. The air motor improves serviceability, increases efficiency and offers a lower cost of ownership. Our sanitary piston pumps are ideal for most food-related, cosmetic and personal care applications.

Quick Knockdown Sanitary Piston Pumps for Food and Personal Care ApplicationsMost advanced air motor on the marketAvailable in double-ball and priming piston designsFluid transfer and supply of low to medium viscosity fluidsSuitable to pump products such as: cosmetics, fruit juice concentrates, creamy candy fillings, ice cream variegates, jams and jellies

FDA-Compliant Shroud:

Easily removable FDA-compliant shroud to clean and access modular air valve - reducing downtime
Quick knockdown lowers are made with 300 series stainless steel for long-lasting durability

$13,240.00

LD Series 3:1 Universal Oil Pump with Bung Adapter - BSPT

GG 24G578

LD SERIES OIL PUMP, 3:1, UNIVERSAL, BSPT

LD Series 3:1 Universal Oil Pump with Bung Adapter - BSPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

$975.00

LD Series Oil Pump, Assembly, 3:1, Npt

GG 24G585

LD SERIES OIL PUMP, ASSEMBLY, 3:1, NPT

LDâ„¢ 3:1 Oil Pump with 275 Gallon (1040 Liter) Steel Down Tube and Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.

Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.

Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.

Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.

Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.

Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

Includes 1040 liter (275gal) tote down tube

$1,150.00

LD™ 3:1 Oil Pump with Cut-to-Length PVC Downtube and Bung Adapter - NPT

GG 24G579

LD SERIES OIL PUMP, ASSEMBLY, 3:1, NPT

LDâ„¢ 3:1 Oil Pump with Cut-to-Length PVC Downtube and Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.Includes cut-to-length downtube

$1,000.00

LD Series Grease Pump, 50:1, 16 Kg, Npt

GG 24G600

LD SERIES GREASE PUMP, 50:1, 16 KG, NPT

LD Series 50:1 Pump for 35 lb (16 kg). Pail - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.35 lb (16 kg) Grease Pump - 50:1

$1,115.00

Kit, Diaphragm-E1 Ps

GG 24F926

KIT, DIAPHRAGM-E1 PS

Graco 24F926 Diaphragm Kit

$419.00

Kit, REPAIR, PUMP, 5

GG 24G552

KIT, REPAIR, PUMP, 5:1 SANITARY

Lower Repair Kit 5:1 Priming Piston

$1,050.00

LD Series Oil Pump, Assembly, 3:1, Npt

GG 24G582

LD SERIES OIL PUMP, ASSEMBLY, 3:1, NPT

LDâ„¢ 3:1 Oil Pump with 55 Gallon (200 Liter) Down Tube and Bung Adapter - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.Includes 200L (55gal) drum down tube

$1,100.00

Kit, Repair, Pump, Merkur Es, Sst

GG 24G702

Kit, Repair, Pump, Merkur Es, Sst

$939.00

Kit, 3.5in Piston, Merkur Es

GG 24G698

Kit,3.5" Piston,Merkur Es

$295.00

LD Series Grease Pump, 50:1, 55 Kg, Npt

GG 24G603

LD SERIES GREASE PUMP, 50:1, 55 KG, NPT

LD Series 50:1 Pump for 120 lb (55 kg). Pail - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.120 lb (55 kg) Grease Pump - 50:1

$1,115.00

LD Series Grease Pump, 50:1, 180 Kg, Npt

GG 24G606

LD SERIES GREASE PUMP, 50:1, 180 KG, NPT

LD Series 50:1 Pump for 400 lb (180 kg). Pail - NPT

The LD Series Pumps offer amazing performance at an amazingly competitive price. These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LDâ„¢ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

Three Inch Air Motor - Provides more power to create better flow.Innovative Air Valve - Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Engineered for Durability - Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Pilot Valve - Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.Adjustable Bung Adapter Included - Built-in slide adjustment with easy-set hand screws can fit into more applications.Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.400 lb (180 kg) Grease Pump - 50:1

$1,225.00

Kit, 3.5" Air Motor, Merkur Es

GG 24G694

Kit, 3.5" Air Motor, Merkur Es

$1,720.00

Kit, Frnt Hd, Int Mix, Gel

GG 24G615

Kit, Frnt Hd, Int Mix, Gel

$890.00

Bracket, Top, IBC

GG 24F931

Bracket, Top, IBC

$297.50

Kit, Seal, 3.5" Motor, Merkur Es

GG 24G700

KIT, SEAL, 3.5" MOTOR, MERKUR ES

$76.75

Agitator, Speed Control

GG 24G621

AGITATOR, SPEED CONTROL

Graco 24G621 Agitator Speed Controller- Automatic Speed Controller for Air Drive Agitators

Maintain consistent agitator speed, even with an empty drum

Quick install, requires less than 1 minute to setup
Prevents over agitation for shear sensitive and waterborne materials
Saves energy by limiting agitator over speeding Prevents motor over speeding, extending lifetime
Maintains constant set speed even as viscosity or drum levels change
Provides closed-loop speed control for agitators

Air Inlet Size (cm): 0.3175
Air Inlet Size (in): 1/8
Air Inlet Size (mm): 3.175
Air Inlet Thread Type: NPT

$819.00

Kit, Rebuild, Pump Lower, Sst

GG 24G705

KIT,REBUILD,PUMP LOWER,SST

$181.50

Kit, Repair, Piston Rod, Cs

GG 24G703

Kit, Repair, Piston Rod, Cs

$177.00

Kit, Repair, Piston Rod, Sst

GG 24G704

Kit, Repair, Piston Rod, Sst

$244.50

Kit, Gear/Shim Set

GG 24G736

Kit, Gear/Shim Set

$2,040.00

Packing O-Ring

GG 104892

Packing O-Ring

$10.70

SPRING TORSION

GG 104820

SPRING TORSION

$33.30

Adapter

GG 105276

Adapter

$95.50

O-ring, Red Alert HP

GG 105280

O-ring, Red Alert HP

$24.40

1/2in Air Regulator

GG 104267

REGULATOR, AIR 125 LB WORKING PRESSURE

Air Regulator, 1/2(f) inlet/outlet, 0-125 psi (0-8.6 bar), zinc platedMultiple outlets for connecting equipment, gauges, or ball valvesAccurate adjustment of air pressure for process control

$101.00

Nut, Lock

GG 105332

Nut, Lock

$35.30

Ball (.5000)

GG 105445

Ball (.5000)

$6.20

Packing

GG 104537

Packing

$31.50