GRACO INC. S10595
GRACO INC. S10595 branded products
SILVER FLAT TIP, SPRAY TC
GG 163665
GG 163665
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 665 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 665 Silver Flat Tip has a 0.065 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163667
GG 163667
SILVER FLAT TIP, SPRAY TC
Graco 163667 Silver Flat Tip, 667
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 667 Silver Flat Tip has a 0.067 inch orifice and produces a 12 to 14 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 4.82
- Maximum Flow Rate (L/min): 18.25
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.067
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$54.25
FF FLAT TIP, SPRAY TC
GG 163718
GG 163718
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 718 The 718 Fine Finish Flat Tip produces a 14 to 16 inch fan pattern and a 0.018 inch orifice. $148.00
SILVER FLAT TIP, SPRAY TC
GG 163717
GG 163717
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 717 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 717 Silver Flat Tip has a 0.017 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163729
GG 163729
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 729 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 729 Silver Flat Tip has a 0.029 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163737
GG 163737
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 737 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 737 Silver Flat Tip has a 0.037 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163757
GG 163757
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 757 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 757 Silver Flat Tip has a 0.057 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163813
GG 163813
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 813 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 813 Silver Flat Tip has a 0.013 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163814
GG 163814
SILVER FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 814 The 814 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.014 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163816
GG 163816
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 816 The 816 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.016 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163818
GG 163818
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 818 The 818 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.018 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163820
GG 163820
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 820 The 820 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.020 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163822
GG 163822
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 822 The 822 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.022 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163825
GG 163825
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 825 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 825 Silver Flat Tip has a 0.025 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163826
GG 163826
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 826 The 826 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.026 inch orifice. $66.00
Silver Flat Tip, Spray TC
GG 163827
GG 163827
SILVER FLAT TIP, SPRAY TC
Graco 163827 Silver Flat Tip, 827
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 827 Silver Flat Tip has a 0.027 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 0.78
- Maximum Flow Rate (L/min): 2.95
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.027
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163829
GG 163829
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 829 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 829 Silver Flat Tip has a 0.029 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163831
GG 163831
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 831 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 831 Silver Flat Tip has a 0.031 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163841
GG 163841
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 841 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 841 Silver Flat Tip has a 0.041 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163845
GG 163845
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 845Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 845 Silver Flat Tip has a 0.045 inch orifice and produces a 16 to 18 inch (41-45 cm) fan.
Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163847
GG 163847
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 847 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 847 Silver Flat Tip has a 0.047 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163849
GG 163849
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 849 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 849 Silver Flat Tip has a 0.049 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163861
GG 163861
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 861 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 861 Silver Flat Tip has a 0.061 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
TIP, SPRAY, TC
GG 163865
GG 163865
TIP, SPRAY, TC
Silver Flat Tip, 865 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 865 Silver Flat Tip has a 0.065 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray, Tc
GG 163871
GG 163871
SILVER FLAT TIP, SPRAY, TC
Graco 163871 Silver Flat Tip, 871
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 871 Silver Flat Tip has a 0.071 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 5.41
- Maximum Flow Rate (L/min): 20.48
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.071
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
Ff Flat Tip, Spray Tc
GG 163924
GG 163924
FF FLAT TIP, SPRAY TC
Graco 163924 Fine Finish Flat Tip, 924
The 924 Fine Finish Flat Tip produces an 18 to 20 inch (46 to 51 cm) fan pattern and a 0.024 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 50.8
- Maximum Fan Width (in): 18
- Maximum Fan Width (mm): 508
- Maximum Flow Rate (GPM): 0.62
- Maximum Flow Rate (L/min): 2.35
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 18
- Minimum Fan Width (mm): 457
- Orifice Diameter (in): 0.024
- Pattern Size (in): 18 to 20
- Pattern Size (mm): 457.2 to 508
$66.00
GH SPRAYER, 933, HYDR, BARE
GG 16U281
GG 16U281
GH SPRAYER, 933, HYDR, BARE
GH 933 Big Rig Gas Hydraulic Sprayer, Bare For 30 years, contractors have turned to the GH line of gas hydraulic sprayers when they needed maximum performance and unmatched versatility. Whether you need high pressure for long hose runs or hard-to-atomize materials, or high flow rates for heavier coverage, the GH 933 can get the job done. High production architectural coatings, bridges, waterproofing and air barrier, roofing, fire proofing and protective & marine coatings: spray the most aggressive applications, without the need of an expensive air compressor to carry around. Honda® Engine- 390 cc (13 HP) engine with integrated fuel tank to deliver maximum performance
- Contractor preferred engine with Oil Alert
- Faster, more responsive changeover
- O-ring sealed to eliminate leaks
- High-precision pressure control
- No hydraulic reset button needed
- Durable hydraulic lines for long life
- Large 4 gallon hydraulic reservoir
- Return line hydraulic filter extends life
- No special hydraulic fluid needed
- Proven cooler and blower system
- Easy to use drain plug
- Easy-roll tubed pneumatic tires
- Enamel painted steel tubing – corrosion protection
- Multi-function design converts to skid mount in seconds
- QuikChange pump section
- Time-tested durability and performance
- Long-life XtremeSeal and leather packings
- Heavy-duty piston rod for long life
- QuickAccess intake valve removes easily for fast repairs
- Lockable pressure control knob
- Grounding wire for safety with solvent materials
- Large diameter siphon hose
$21,330.00