GRACO INC. S10595
GRACO INC. S10595 branded products
Pan, Drain, Rolling
GG 218969
GG 218969
PAN, DRAIN, ROLLING
Graco 218969 Track Receiver for Car and Truck Fast Lube Facilities
Specially designed for car and truck fast-lube facilities where speed and mobility are important.
- Adjustable steel rollers fit track widths of 39 in (99 cm) to 46 inches (117 cm), with a minimum running width of 2-1/2 in (63.5 mm).
- Front and rear drain fittings allow use of two drains on a single track, permitting two receivers to be drained simultaneously.
- Unit includes 30 gal (114 liter) steel tank, 1-1/2 NPT drain valve (108204), 1-1/2 NPT quick coupler (108202) and 1-1/2 NPT coupler cap.
- Compatible Fluid: Oil
- Includes: Steel Tank, Fittings
- Overall Height (cm): 27.94
- Overall Height (ft): 0.92
- Overall Height (in): 11
- Overall Height (m): 0.28
- Overall Height (mm): 279.4
- Overall Length (cm): 84
- Overall Length (ft): 2.75
- Overall Length (in): 33
- Overall Length (m): 0.84
- Overall Length (mm): 838.2
- Overall Width (cm): 60.96
- Overall Width (ft): 2
- Overall Width (in): 24
- Overall Width (m): 0.61
- Overall Width (mm): 609.6
$2,030.00
KIT, 200MESHFILTER, FFLP106 TIP
GG 21A106
GG 21A106
KIT, 200MESHFILTER, FFLP106 TIP
RAC X FF LP 106 Control Spray Starter Kit Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 106 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. Also, using an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Includes RAC X FF LP 106 SwitchTip, and 200 mesh gun and manifold filters delivering a complete solution for jobs requiring ultimate control. Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fann pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$98.50
KIT, 200MESHFILTER, FFLP206 TIP
GG 21A206
GG 21A206
KIT, 200MESHFILTER, FFLP206 TIP
RAC X FF LP 206 Control Spray Starter Kit Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 206 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. Also, using an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Includes RAC X FF LP 206 SwitchTip, and 200 mesh gun and manifold filters delivering a complete solution for jobs requiring ultimate control. Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fann pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$98.50
DISPENSER
GG 220107
GG 220107
DISPENSER
Oil Dispense Bar - Up to 3 Dispense Taps and Optional MetersModular convenient design allows up to 2 oil dispense taps or 3 meters to be added at the time of installation, or later if required.
Tough metal cabinet with baked-on enamel finish. Constructed with single-dispense tap and waste pan with plated, perforated metal service area and drain connection. $1,715.00
KIT, VALVE, DISPENSER
GG 220112
GG 220112
KIT, VALVE, DISPENSER
Dispenser Valve Kit for Adding Additional Dispense Valves toModular Oil Dispense BarAdd additional dispense points to dispense bar.
Typical applications include automotive and heavy-duty dealerships, mining, service and fast lube centers, fleet service facilities, in-plant, and mining. $700.00
Hose, Coupled, 3/8in x 2.5ft, 3300 psi
GG 220849
GG 220849
Hose, Coupled, 3/8In X 2.5', 3300 Psi $137.50
FIREBALL 425 PUMP, 10:1, 55 GL
GG 222065
GG 222065
FIREBALL 425 PUMP, 10:1, 55 GL
Fire-Ball® 425 Series 10:1 55 Gallon (200 Liter) Drum Size Oil Pump - Cover MountWith a large 4.25 inch (107.9 mm) air motor to supply the power you need for long pipe runs and higher volume dispensing, the Fire-Ball 425 delivers field-proven durability for multiple fluid types and exceptional cost savings that are hard to beat!
The Fire-Ball 425 is the pump of choice for your most demanding high volume applications - an ideal choice for applications such as truck fleet service facilities and in-plant applications where multiple dispenses happen at the same time. Durable Casting - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life. $6,000.00
FIREBALL 425 PUMP, 50:1, TRK PKG
GG 222075
GG 222075
FIREBALL 425 PUMP, 50:1, TRK PKG
Fire-Ball® 425 Series 50:1 400 lb. (180 kg) Grease Pump - Lube Truck PackageThe Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.
The Fire-Ball 425 is the pump of choice for your most demanding high volume applications. Durable Casting - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life. $9,760.00
FIREBALL 300 PUMP, LUBT, LP
GG 222086
GG 222086
FIREBALL 300 PUMP, LUBT, LP
Fire-Ball® 300 Series 5:1 16 Gallon (60 Liter) Open-Head Oil Pump - Lube Truck Package As the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently. Install the Fire-Ball 300 5:1 in high pressure, medium volume oil transfer applications such as automotive dealerships, fast lube centers, and service shops. Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life. $2,750.00
Kit, Meter, Dispenser, Bulk
GG 239706
GG 239706
KIT, METER, DISPENSER, BULK
Graco 239706 Meter Kit for Adding IM5 Electronic Totalizing Meter to Dispense Valve. Reads in Gallons, Quarts, Pints and Liters.
Add electronic meter to dispense points for dispense bar.
Application: Typical applications include automotive and heavy-duty dealerships, mining, service and fast lube centers, fleet service facilities, in-plant, and mining.- Model: LD
- Battery Chemistry: Alkaline
- Battery Size: 9 V
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil
- Display Type: Electronic
- Fluid Type: Petroleum-Based Oil, Synthetic-Based Oil
- For Use With: Petroleum- and synthetic-based oils (motor, gear and ATF)
- Inlet Size (cm): 1.27
- Inlet Size (in): 0.5
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 5
- Maximum Working Pressure (bar): 34
- Maximum Working Pressure (kPa): 3400
- Maximum Working Pressure (MPa): 3.4
- Maximum Working Pressure (psi): 500
- Meter Accuracy (%): ±0.5
- Outlet Size (in): 0.5
- Recommended Environment: Indoor, Outdoor
$1,345.00
FIREBALL 425 PUMP, 75:1, 120LB
GG 239729
GG 239729
FIREBALL 425 PUMP, 75:1, 120LB
Fire-Ball® 425 Series 120 lb (55 kg). Drum Grease PumpThe Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.
The Fire-Ball 425 is the pump of choice for your most demanding high volume applications. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life. $7,150.00