GRACO INC. S10595
GRACO INC. S10595 branded products
SILVER FLAT TIP, SPRAY TC
GG 163631
GG 163631
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 631 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 631 Silver Flat Tip has a 0.031 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163637
GG 163637
SILVER FLAT TIP, SPRAY TC
Graco 163637 Silver Flat Tip, 637
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 637 Silver Flat Tip has a 0.037 inch orifice and produces a 12 to 14 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 1.47
- Maximum Flow Rate (L/min): 5.56
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.037
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163639
GG 163639
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 639 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 639 Silver Flat Tip has a 0.039 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163641
GG 163641
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 641 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 641 Silver Flat Tip has a 0.041 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163643
GG 163643
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 643 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 643 Silver Flat Tip has a 0.043 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163645
GG 163645
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 645 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 645 Silver Flat Tip has a 0.045 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163647
GG 163647
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 647 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 647 Silver Flat Tip has a 0.047 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163651
GG 163651
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 651 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 651 Silver Flat Tip has a 0.051 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163657
GG 163657
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 657 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 657 Silver Flat Tip has a 0.057 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163661
GG 163661
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 661 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 661 Silver Flat Tip has a 0.061 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163663
GG 163663
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 663 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 663 Silver Flat Tip has a 0.063 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163665
GG 163665
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 665 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 665 Silver Flat Tip has a 0.065 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163667
GG 163667
SILVER FLAT TIP, SPRAY TC
Graco 163667 Silver Flat Tip, 667
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 667 Silver Flat Tip has a 0.067 inch orifice and produces a 12 to 14 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 4.82
- Maximum Flow Rate (L/min): 18.25
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.067
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$54.25
FF FLAT TIP, SPRAY TC
GG 163718
GG 163718
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 718 The 718 Fine Finish Flat Tip produces a 14 to 16 inch fan pattern and a 0.018 inch orifice. $148.00
SILVER FLAT TIP, SPRAY TC
GG 163717
GG 163717
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 717 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 717 Silver Flat Tip has a 0.017 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163729
GG 163729
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 729 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 729 Silver Flat Tip has a 0.029 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163737
GG 163737
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 737 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 737 Silver Flat Tip has a 0.037 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163757
GG 163757
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 757 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 757 Silver Flat Tip has a 0.057 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163813
GG 163813
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 813 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 813 Silver Flat Tip has a 0.013 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163814
GG 163814
SILVER FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 814 The 814 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.014 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163816
GG 163816
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 816 The 816 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.016 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163818
GG 163818
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 818 The 818 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.018 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163820
GG 163820
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 820 The 820 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.020 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163822
GG 163822
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 822 The 822 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.022 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163825
GG 163825
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 825 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 825 Silver Flat Tip has a 0.025 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163826
GG 163826
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 826 The 826 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.026 inch orifice. $66.00
Silver Flat Tip, Spray TC
GG 163827
GG 163827
SILVER FLAT TIP, SPRAY TC
Graco 163827 Silver Flat Tip, 827
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 827 Silver Flat Tip has a 0.027 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 0.78
- Maximum Flow Rate (L/min): 2.95
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.027
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163829
GG 163829
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 829 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 829 Silver Flat Tip has a 0.029 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163831
GG 163831
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 831 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 831 Silver Flat Tip has a 0.031 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163841
GG 163841
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 841 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 841 Silver Flat Tip has a 0.041 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163845
GG 163845
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 845Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 845 Silver Flat Tip has a 0.045 inch orifice and produces a 16 to 18 inch (41-45 cm) fan.
Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163847
GG 163847
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 847 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 847 Silver Flat Tip has a 0.047 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163849
GG 163849
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 849 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 849 Silver Flat Tip has a 0.049 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163861
GG 163861
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 861 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 861 Silver Flat Tip has a 0.061 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
TIP, SPRAY, TC
GG 163865
GG 163865
TIP, SPRAY, TC
Silver Flat Tip, 865 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 865 Silver Flat Tip has a 0.065 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray, Tc
GG 163871
GG 163871
SILVER FLAT TIP, SPRAY, TC
Graco 163871 Silver Flat Tip, 871
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 871 Silver Flat Tip has a 0.071 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 5.41
- Maximum Flow Rate (L/min): 20.48
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.071
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
Ff Flat Tip, Spray Tc
GG 163924
GG 163924
FF FLAT TIP, SPRAY TC
Graco 163924 Fine Finish Flat Tip, 924
The 924 Fine Finish Flat Tip produces an 18 to 20 inch (46 to 51 cm) fan pattern and a 0.024 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 50.8
- Maximum Fan Width (in): 18
- Maximum Fan Width (mm): 508
- Maximum Flow Rate (GPM): 0.62
- Maximum Flow Rate (L/min): 2.35
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 18
- Minimum Fan Width (mm): 457
- Orifice Diameter (in): 0.024
- Pattern Size (in): 18 to 20
- Pattern Size (mm): 457.2 to 508
$66.00