GRACO INC. S10595

GG 576206

XP SYSTEM, 2:1, 115/58, COMPLETE, HAZ

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

GG 576207

XP SYSTEM, 2:1, 115/58, CMPLT, NON-HAZ

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

GG 576305

XP SYSTEM, 3:1, 145/48, BF, CH, HS, JB

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

GG 576306

XP SYSTEM, 3:1, 145/48, COMPLETE, HAZ

Graco 576306 XP70 Skid System, Hazardous Location, 3:1 With Primary Heaters & Hose Heat, 240V

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

• Series: XP70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: With Primary Heaters & Hose Heat

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: 7 Gallon Hoppers, XTR+ Gun, 35 ft integration Hose and Static Mixer, Merkur Flush Pump, Viscon HP Heaters, Hose Heat Circulation Kit, Remote Carriage, PressureTrak

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 7570

• Maximum Flow Rate (GPM): 2
• Maximum Flow Rate (L/min): 7.57

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 469
• Maximum Working Pressure

GG 576307

XP SYSTEM, 3:1, 145/48, CMPLT, NON-HAZ

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

GG 576405

XP SYSTEM, 4:1, 145/36, BF, CH, HS, JB

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

GG 576406

XP SYSTEM, 4:1, 145/36, COMPLETE, HAZ

Graco 576406 XP70 Skid System, Hazardous Location, 4:1 With Primary Heaters & Hose Heat, 240V

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

• Series: XP70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: With Primary Heaters & Hose Heat

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: 7 Gallon Hoppers, XTR+ Gun, 35 ft integration Hose and Static Mixer, Merkur Flush Pump, Viscon HP Heaters, Hose Heat Circulation Kit, Remote Carriage, PressureTrak

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 7200

• Maximum Flow Rate (GPM): 1.9
• Maximum Flow Rate (L/min): 7.2

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressur

GG 576407

XP SYSTEM, 4:1, 145/36, CMPLT, NON-HAZ

Graco 576407 XP70 Skid System, Non-Hazardous, 4:1 With Primary Heaters & Hose Heat, 240V

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

• Series: XP70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: With Primary Heaters & Hose Heat

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: 7 Gallon Hoppers, Merkur Solvent Flush Pump, XTR+ Gun, 35 ft integration Hose and Static Mixer, 240V Junction Box, Viscon HP Heaters, Hose Heat Circulation Kit, Remote Carriage, PressureTrak

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 7200

• Maximum Flow Rate (GPM): 1.9
• Maximum Flow Rate (L/min): 7.2

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500

GG 577101

XP SYSTEM, XP70S, 1:1, 145/145, 240, WJ

GG 577103

XP SYSTEM, XP70S, 1:1, 145/145, 240, EH

GG 577111

XP SYSTEM, XP70S, 1:1, 145/145, 240H, WJ

Graco 577111 XP70s-hf Skid System, Hazardous Location, 1:1 With Water Jacketed Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11600

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 577113

XP SYSTEM, XP70S, 1:1, 145/145, 240H, EH

Graco 577113 XP70s-hf Skid System, Hazardous Location, 1:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11600

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 577121

XP SYSTEM, XP70S, 1:1, 145/145, 480, WJ

Graco 577121 XP70 High Flow Skid, 1:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11600

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 577123

XP SYSTEM, XP70S, 1:1, 145/145, 480, EH

Graco 577123 XP70 High Flow Skid, 1:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11600

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 577131

XP SYSTEM, XP70S, 1:1, 145/145, 480H, WJ

GG 577133

XP SYSTEM, XP70S, 1:1, 145/145, 480H, EH

Graco 577133 XP70 High Flow Skid, 1:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 25 gallon heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 25 gallon Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11600

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 577201

XP SYSTEM, XP70S, 2:1, 180/90, 240, WJ

GG 577203

XP SYSTEM, XP70S, 2:1, 180/90, 240, EH

GG 577211

XP SYSTEM, XP70S, 2:1, 180/90, 240H, WJ

Graco 577211 XP70s-hf Skid System, Hazardous Location, 2:1 With Water Jacketed Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10800

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 2:1

• Power Source: Air

• Product Type: Plural Component

GG 577221

XP SYSTEM, XP70S, 2:1, 180/90, 480, WJ

GG 577213

XP SYSTEM, XP70S, 2:1, 180/90, 240H, EH

Graco 577213 XP70s-hf Skid System, Hazardous Location, 2:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10800

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 2:1

• Power Source: Air

• Product Type: Plural Component

GG 577223

XP SYSTEM, XP70S, 2:1, 180/90, 480, EH

Graco 577223 XP70 High Flow Skid, 2:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10800

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 2:1

• Power Source: Air

• Product Type: Plural Component

GG 577231

XP SYSTEM, XP70S, 2:1, 180/90, 480H, WJ

GG 577233

XP SYSTEM, XP70S, 2:1, 180/90, 480H, EH

Graco 577233 XP70 High Flow Skid, 2:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10800

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 2:1

• Power Source: Air

• Product Type: Plural Component

GG 577301

XP SYSTEM, XP70S, 3:1, 220/72, 240, WJ

GG 577311

XP SYSTEM, XP70S, 3:1, 220/72, 240H, WJ

Graco 577311 XP70s-hf Skid System, Hazardous Location, 3:1 With Water Jacketed Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577313

XP SYSTEM, XP70S, 3:1, 220/72, 240H, EH

Graco 577313 XP70s-hf Skid System, Hazardous Location, 3:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577303

XP SYSTEM, XP70S, 3:1, 220/72, 240, EH

GG 577321

XP SYSTEM, XP70S, 3:1, 220/72, 480, WJ

Graco 577321 XP70 High Flow Skid, 3:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577323

XP SYSTEM, XP70S, 3:1, 220/72, 480, EH

Graco 577323 XP70 High Flow Skid, 3:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577331

XP SYSTEM, XP70S, 3:1, 220/72, 480H, WJ

Graco 577331 XP70 High Flow Skid, 3:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577333

XP SYSTEM, XP70S, 3:1, 220/72, 480H, EH

Graco 577333 XP70 High Flow Skid, 3:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 11680

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.3

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 490

• Maximum Spray Pressure (kPa): 49000
• Maximum Spray Pressure (MPa): 49
• Maximum Spray Pressure (psi): 7100

• Maximum Working Pressure (bar): 490
• Maximum Working Pressure (kPa): 49000
• Maximum Working Pressure (MPa): 49
• Maximum Working Pressure (psi): 7100
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 3:1

• Power Source: Air

• Product Type: Plural Component

GG 577401

XP SYSTEM, XP70S, 4:1, 220/54, 240, WJ

GG 577403

XP SYSTEM, XP70S, 4:1, 220/54, 240, EH

GG 577411

XP SYSTEM, XP70S, 4:1, 220/54, 240H, WJ

Graco 577411 XP70s-hf Skid System, Hazardous Location, 4:1 With Water Jacketed Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 577423

XP SYSTEM, XP70S, 4:1, 220/54, 480, EH

Graco 577423 XP70 High Flow Skid, 4:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 577421

XP SYSTEM, XP70S, 4:1, 220/54, 480, WJ

Graco 577421 XP70 High Flow Skid, 4:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 577413

XP SYSTEM, XP70S, 4:1, 220/54, 240H, EH

Graco 577413 XP70s-hf Skid System, Hazardous Location, 4:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 577431

XP SYSTEM, XP70S, 4:1, 220/54, 480H, WJ

Graco 577431 XP70 High Flow Skid, 4:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 577433

XP SYSTEM, XP70S, 4:1, 220/54, 480H, EH

Graco 577433 XP70 High Flow Skid, 4:1 Mix Ratio, 480V, Hazardous Viscon HF Heaters, Hazardous Junction Box, Electric Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP70s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Skid Mount with 25 gal Heated & Agitated Hoppers

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10960

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.6

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 4:1

• Power Source: Air

• Product Type: Plural Component

GG 578101

XP SYSTEM, XP50S, 1:1, 220/220, 240, WJ

GG 578002

GG 578103

XP SYSTEM, XP50S, 1:1, 220/220, 240, EH

Graco 578103 XP50s-hf Skid System, Non-Hazardous, 1:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP50s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 17600

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.4

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 330

• Maximum Spray Pressure (kPa): 33000
• Maximum Spray Pressure (MPa): 33
• Maximum Spray Pressure (psi): 4750

• Maximum Working Pressure (bar): 330
• Maximum Working Pressure (kPa): 33000
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4750
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 578111

XP SYSTEM, XP50S, 1:1, 220/220, 240H, WJ

Graco 578111 XP50s-hf Skid System, Hazardous Location, 1:1 With Water Jacketed Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP50s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 17600

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.4

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 330

• Maximum Spray Pressure (kPa): 33000
• Maximum Spray Pressure (MPa): 33
• Maximum Spray Pressure (psi): 4750

• Maximum Working Pressure (bar): 330
• Maximum Working Pressure (kPa): 33000
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4750
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 578113

XP SYSTEM, XP50S, 1:1, 220/220, 240H, EH

Graco 578113 XP50s-hf Skid System, Hazardous Location, 1:1 With Electric Heated Hose, 240V

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 25 gallon heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use, Designed for Hazardous Location approval
• 25 gallon Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP50s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Electric Heated Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Merkur Solvent Flush Pump, Remote Manifold Carriage, XTR5+ Gun, 35 ft Integration Hose and Static Mixer, Electric Heated Hose Controller, Ratio Check Kit

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 17600

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.4

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 330

• Maximum Spray Pressure (kPa): 33000
• Maximum Spray Pressure (MPa): 33
• Maximum Spray Pressure (psi): 4750

• Maximum Working Pressure (bar): 330
• Maximum Working Pressure (kPa): 33000
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4750
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 578121

XP SYSTEM, XP50S, 1:1, 220/220, 480, WJ

Graco 578121 XP50 High Flow Skid, 1:1 Mix Ratio, 480V, Viscon HF Heaters, Junction Box, Water Heated Hose Control

The XP high flow skid systems combine the XP Sprayers with the powerful XL 10000 air motor. The XPs-hf systems provide greater performance, allowing the flexibility of multi-gun application to shorten your project completion time. With the durable, 94 litres heated and agitated tanks, your coatings will obtain the best conditioning to meet the highest demand applications – making you more productive.

• Approved for Ordinary Location use
• 94 litres Stainless Steel lined hoppers with heater and agitator
• Solvent flush pump included

• Series: XP50s-hf

• Air Inlet Size (in): 1
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Water Jacketed Hose

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Location Category: Non-Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 17600

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.4

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature (°C): 54
• Maximum Operating Temperature (°F): 130

• Maximum Spray Pressure (bar): 330

• Maximum Spray Pressure (kPa): 33000
• Maximum Spray Pressure (MPa): 33
• Maximum Spray Pressure (psi): 4750

• Maximum Working Pressure (bar): 330
• Maximum Working Pressure (kPa): 33000
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4750
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Ratio: 1:1

• Power Source: Air

• Product Type: Plural Component

GG 578123

XP SYSTEM, XP50S, 1:1, 220/220, 480, EH

GG 562690

MHH VALVE, ASSY 30T

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

GG 562730

MSP VALVE, ASSY IND MSP 25S

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562732

MSP VALVE, ASSY IND MSP 35S

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562733

MSP VALVE, ASSY IND MSP 40S

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562741

MSP VALVE, ASSY IND MSP 30T

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562740

MSP VALVE, ASSY IND MSP 25T

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562742

MSP VALVE, ASSY IND RIGHT MSP 35T

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 562755

MSP VALVE, ASSY MSP-10S-SS

GG 562756

MSP VALVE, ASSY MSP-20S-SS

GG 562757

MSP VALVE, ASSY MSP-40S-SS

GG 562758

MSP VALVE, ASSY MSP-10T-SS

GG 562759

MSP VALVE, ASSY MSP-20T-SS

GG 562760

MSP VALVE, ASSY MSP-40T-SS

GG 562814

MXP VALVE, TWIN 50T

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562815

VAVLE, TWIN MXP-75T

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562817

MXP VALVE, TWIN 125T

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562818

MXP VALVE, TWIN 150T

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562819

MXP VALVE, SINGLE 25S

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562821

MXP VALVE, SINGLE 75S

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562827

MXP VALVE, TWIN 100T W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562826

MXP VALVE, TWIN 75T W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562823

MXP VALVE, SINGLE 125S

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562825

MXP VALVE, TWIN 50T W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562829

MXP VALVE, TWIN 150T W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562828

MXP VALVE, TWIN 125T W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562830

MXP VALVE, SINGLE 50S W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562831

MXP VALVE, SINGLE 75S W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562832

MXP VALVE, SINGLE 100S W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562833

MXP VALVE, SINGLE 125S W/IND

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562835

MXP VALVE, BYPASS

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

GG 562852

GG 562886

GG 562887

GG 562889

GG 562890

GG 562892

RESERVOIR, PLSTC OIL LUBEMASTER 12P

12 pt Plastic Oil Reservoir

GG 562893

RESERVOIR, PLASIC OIL LUBEMASTER 20

20 pt (9.46 liter) Oil Reservoir

GG 562895

RESERVOIR, MTL OIL LUBEMASTER 20PT

20 pt Metal Oil Reservoir

GG 562896

RESERVOIR, PLSTC GRS LUBEMASTER 12L

12 lb (5.44 kg) Reservoir

GG 562899

RESERVOIR, LUBEMASTER, GREASE, 20LB, METAL

20 lb metal grease reservoir