Airpower | GRACO INC. S10595 branded products

Merkur Bellows System, Pump, 150cc, Std

GG G15B67

Merkur Bellows System, Pump, 150Cc, Std

$12,100.00

MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD

GG G15B69

MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD

Merkur Bellows 15:1 Ratio Air-Assisted Airless Package with U-Cup Seal, Wall Mount, Fluid Filter, Hoses, PerformAA 15 Spray Gun Graco’s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials. Highest technology air motor on the market Low air consumption for increased efficiency Simple air motor design and minimal parts reduces repair time Easy-to-flush design allows for fast color changes and reduced material waste 300 series stainless steel pump construction provides long-lasting durability

$13,190.00

Merkur Bellows System, Pump, 150cc, Std

GG G15B73

MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD

Graco G15B73 Merkur Bellows 15:1 Ratio Air-Assisted Airless Package with U-Cup Seal, Cart Mount, Fluid Filter, Hoses, PerformAA 15 Spray Gun

Gracoâ€™s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials.

Highest technology air motor on the market
Low air consumption for increased efficiency
Simple air motor design and minimal parts reduces repair time
300 series stainless steel pump construction provides long-lasting durability

Model: Merkur
Series: Bellows

Application: Supply

Compatible Material: Waterborne, Solventborne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish, UV Coating

Convertible: Non-Convertible

Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Type: NPT

Frame Configuration: Cart

Gun Included: 1
Gun Model: G15
Gun Technology: Air-Assisted
Gun Type: Air-Assisted

Includes: Pump and Gun Air Controls, Drain Valves, Fluid Filter, U-Cup

Maximum Flow Rate (GPM): 2.4

Maximum Hose Length (ft): 25
Maximum Hose Length (m): 7.6

Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500

Motor Type: Pneumatic

Mount Type: Cart Mount

Number of Guns: 1

Outlet Paint Filter: 60 Mesh Stainless Steel Screen

Power Source: Air

Pressure Type: High Pressure
Product Type: Spray Package

Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$13,770.00

Merkur Bellows System, Pump, 150cc, Std

GG G15B77

Merkur Bellows System, Pump, 150Cc, Std

Call for pricing

Merkur System, Pump, 15:1, 25cc, Cart, Std

GG G15C01

Merkur System, Pump, 15:1, 25Cc, Cart, Std

$4,740.00

Merkur System, Pump, 15:1, 25cc, Cart, Std

GG G15C03

MERKUR SYSTEM, PUMP, 15:1, 25CC, CART, STD

Graco G15C03 15:1 Merkur Pump, 0.4 gpm (1.5 lpm) fluid flow, Cart Mount, Pump/Gun Air Controls, Suction Hose

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solventborne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT

Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator

Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76

Includes: Pump and Gun Air Controls, Suction Hose

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100

Maximum Flow Rate (GPM): 0.4
Maximum Flow Rate (L/min): 1.5

Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500

Mount Type: Cart Mount

Power Source: Air

Pressure Type: High Pressure
Product Type: Bare Package

Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$5,160.00

Merkur System, Pump, 15:1, 25cc, Cart, Std

GG G15C05

Merkur System, Pump, 15:1, 25Cc, Cart, Std

$6,200.00

Merkur System, Pump, 15:1, 25cc, Cart, Std

GG G15C15

Merkur System, Pump, 15:1, 25Cc, Cart, Std

$6,200.00

MERKUR SYSTEM, PUMP, 15:1, 25CC, CART, STD

GG G15C17

MERKUR SYSTEM, PUMP, 15:1, 25CC, CART, STD

15:1 Merkur AA Package, 0.4 gpm (1.5 lpm) fluid flow, Cart Mount, PerformAA 15 Wood Lacquer Gun, Pump/Gun Air Controls, Gun Air/Fluid Hose, Fluid Filter Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$6,050.00

Merkur System, Pump, 15:1, 50cc, Cart, Std

GG G15C21

Merkur System, Pump, 15:1, 50Cc, Cart, Std

$5,480.00

Merkur System, Pump, 15:1, 50cc, Cart, Std

GG G15C33

Merkur System, Pump, 15:1, 50Cc, Cart, Std

$8,070.00

Merkur System, Pump, 15:01, 150cc, Crt Smt

GG G15C78

Merkur System, Pump, 15:01, 150Cc, Crt Smt

$9,780.00

MERKUR SYSTEM, PUMP, 15:1, 25CC, WALL, STD

GG G15W11

MERKUR SYSTEM, PUMP, 15:1, 25CC, WALL, STD

15:1 Merkur AA Package, 0.4 gpm (1.5 lpm) fluid flow, Wall Mount, PerformAA 15 Wood Lacquer Gun, Pump/Gun Air Controls, Gun Air/Fluid Hose Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$4,980.00

Merkur System, Pump, 15:1, 25cc, Wall, Std

GG G15W13

Merkur System, Pump, 15:1, 25Cc, Wall, Std

$6,490.00

MERKUR SYSTEM PUMP 15:1 50CC WALL SMT

GG G15W26

MERKUR SYSTEM PUMP 15:1 50CC WALL SMT

15:1 Merkur AA Package, 0.8 gpm (3 lpm) fluid flow, Wall Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Suction Hose, DataTrak Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$7,660.00

MERKUR SYSTEM PUMP 18:1 125CC WALL STD

GG G18W09

MERKUR SYSTEM PUMP 18:1 125CC WALL STD

18:1 Merkur AA Package, 2 gpm (7.5 lpm) fluid flow, Wall Mount, PerformAA 50 RAC Gun, Pump Air Controls, Gun Air/Fluid Hose, Fluid Filter Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$8,240.00

MERKUR BELLOWS SYSTEM, PUMP, 100CC, SMT

GG G23B02

MERKUR BELLOWS SYSTEM, PUMP, 100CC, SMT

Merkur™ Bellows 23:1 Ratio Pump Package with Wall Mount, V-Packing & DataTrak The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive materials, including UV coatings and waterborne materials. Highest technology air motor on the market Low air consumption for increased efficiency Simple air motor design and minimal parts reduces repair time Easy-to-flush design allows for fast color changes and reduced material waste 300 series stainless steel pump construction provides long-lasting durability Fewer parts and online replacement bellows seal means improved serviceability, lower cost of ownership and reduced downtime

$12,570.00

Merkur Bellows System, Pump, 100cc, Std

GG G23B27

Merkur Bellows System, Pump, 100Cc, Std

Call for pricing

Merkur System Pump 23:01 100cc Ct Std

GG G23C01

Merkur System Pump 23:01 100Cc Ct Std

$7,080.00

QUANTM PUMP, QHD-HSFFASSFKFKFKSSA0021

GG HE80-1216

QUANTM PUMP, QHD-HSFFASSFKFKFKSSA0021

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, FK Ball, FK Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 32 Ra surface finish, the groundbreaking new QUANTM high-sanitation pumps offer a higher level of cleanability and protection against bacteria compared to other food-grade pumps. This polished design provides the ideal solution for many food and beverage applications that require higher levels of care or CIP options, as well as personal care and pharmaceutical applications. With a rotating stand for easy cleaning and draining, These electric pumps are ideal for applications involving materials such as tomato puree, diced tomato, general food ingredients, creams, lotions and medicated ingredients. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, FKM (Viton) balls, FKM (Viton) diaphragms and FKM (Viton) manifold o-rings
EN 2.1 material certification

$16,210.00

QUANTM PUMP, QHD-HSFFASSPTPOEPSSA0021

GG HE80-1217

QUANTM PUMP, QHD-HSFFASSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 32 Ra surface finish, the groundbreaking new QUANTM high-sanitation pumps offer a higher level of cleanability and protection against bacteria compared to other food-grade pumps. This polished design provides the ideal solution for many food and beverage applications that require higher levels of care or CIP options, as well as personal care and pharmaceutical applications. With a rotating stand for easy cleaning and draining, These electric pumps are ideal for applications involving materials such as tomato puree, diced tomato, general food ingredients, creams, lotions and medicated ingredients. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,940.00

QUANTM PUMP, QHD-HSFFASSPTPSEPSSA0021

GG HE80-1218

QUANTM PUMP, QHD-HSFFASSPTPSEPSSA0021

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 32 Ra surface finish, the groundbreaking new QUANTM high-sanitation pumps offer a higher level of cleanability and protection against bacteria compared to other food-grade pumps. This polished design provides the ideal solution for many food and beverage applications that require higher levels of care or CIP options, as well as personal care and pharmaceutical applications. With a rotating stand for easy cleaning and draining, These electric pumps are ideal for applications involving materials such as tomato puree, diced tomato, general food ingredients, creams, lotions and medicated ingredients. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,660.00

QUANTM PUMP, QHD-HSFFASSSPSPEPSSA0021

GG HE80-1219

QUANTM PUMP, QHD-HSFFASSSPSPEPSSA0021

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, SP Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 32 Ra surface finish, the groundbreaking new QUANTM high-sanitation pumps offer a higher level of cleanability and protection against bacteria compared to other food-grade pumps. This polished design provides the ideal solution for many food and beverage applications that require higher levels of care or CIP options, as well as personal care and pharmaceutical applications. With a rotating stand for easy cleaning and draining, These electric pumps are ideal for applications involving materials such as tomato puree, diced tomato, general food ingredients, creams, lotions and medicated ingredients. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, Santoprene balls, Santoprene diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,500.00

QUANTM PUMP, QHD-3AFF7SSPTPOEPSSA0021

GG HE80-1301

QUANTM PUMP, QHD-3AFF7SSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, 3A SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM 3A hygienic electric pumps rival our high sanitary pumps from a build construction standpoint as they are outfitted with all stainless steel 316L construction with 32 Ra surface finish. These electric pumps come equipped with a leak sensor and are approved and certified by an outside agency for use in 3A applications. From yogurts to ice cream bases and cottage or ricotta cheese to other dairy ingredients, QUANTM 3A hygienic electric pumps are ideal for dairy applications requiring this approval certification. They also are ideal for handling other ingredients that go into those processes like fruit variegates, chocolate syrups, and other flavorings that make your favorite ice creams. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,420.00

QUANTM PUMP, QHD-3AFF7SSPTEOEPSSA0021

GG HE80-1300

QUANTM PUMP, QHD-3AFF7SSPTEOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, 3A SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, EO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM 3A hygienic electric pumps rival our high sanitary pumps from a build construction standpoint as they are outfitted with all stainless steel 316L construction with 32 Ra surface finish. These electric pumps come equipped with a leak sensor and are approved and certified by an outside agency for use in 3A applications. From yogurts to ice cream bases and cottage or ricotta cheese to other dairy ingredients, QUANTM 3A hygienic electric pumps are ideal for dairy applications requiring this approval certification. They also are ideal for handling other ingredients that go into those processes like fruit variegates, chocolate syrups, and other flavorings that make your favorite ice creams. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, EPDM Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,440.00

QUANTM PUMP, QHD-3AFF8SSPTEOEPSSA0021

GG HE80-1302

QUANTM PUMP, QHD-3AFF8SSPTEOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, 3A SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, EO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM 3A hygienic electric pumps rival our high sanitary pumps from a build construction standpoint as they are outfitted with all stainless steel 316L construction with 32 Ra surface finish. These electric pumps come equipped with a leak sensor and are approved and certified by an outside agency for use in 3A applications. From yogurts to ice cream bases and cottage or ricotta cheese to other dairy ingredients, QUANTM 3A hygienic electric pumps are ideal for dairy applications requiring this approval certification. They also are ideal for handling other ingredients that go into those processes like fruit variegates, chocolate syrups, and other flavorings that make your favorite ice creams. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, EPDM Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,610.00

QUANTM PUMP, QHD-3AFF8SSPTPOEPSSA0021

GG HE80-1303

QUANTM PUMP, QHD-3AFF8SSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, 3A SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM 3A hygienic electric pumps rival our high sanitary pumps from a build construction standpoint as they are outfitted with all stainless steel 316L construction with 32 Ra surface finish. These electric pumps come equipped with a leak sensor and are approved and certified by an outside agency for use in 3A applications. From yogurts to ice cream bases and cottage or ricotta cheese to other dairy ingredients, QUANTM 3A hygienic electric pumps are ideal for dairy applications requiring this approval certification. They also are ideal for handling other ingredients that go into those processes like fruit variegates, chocolate syrups, and other flavorings that make your favorite ice creams. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,580.00

QUANTM PUMP, QHD-PHFF7SSPTPOEPSSA0021

GG HE80-1400

QUANTM PUMP, QHD-PHFF7SSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,290.00

QUANTM PUMP, QHD-PHFF7SSPTPSEPSSA0021

GG HE80-1401

QUANTM PUMP, QHD-PHFF7SSPTPSEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,010.00

QUANTM PUMP, QHD-PHFF8SSPTPOEPSSA0021

GG HE80-1402

QUANTM PUMP, QHD-PHFF8SSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,460.00

QUANTM PUMP, QHD-PHFF8SSPTPSEPSSA0021

GG HE80-1403

QUANTM PUMP, QHD-PHFF8SSPTPSEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,180.00

QUANTM PUMP, QHD-PHFF9SSPTPOEPSSA0021

GG HE80-1404

QUANTM PUMP, QHD-PHFF9SSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,800.00

QUANTM PUMP, QHD-PHFF9SSPTPSEPSSA0021

GG HE80-1405

QUANTM PUMP, QHD-PHFF9SSPTPSEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,510.00

QUANTM PUMP, QHD-PHFFASSPTPOEPSSA0021

GG HE80-1406

QUANTM PUMP, QHD-PHFFASSPTPOEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,960.00

QUANTM ADAPTER, QHD-PHFFASSPTPSEPSSA0021

GG HE80-1407

QUANTM ADAPTER, QHD-PHFFASSPTPSEPSSA0021

QUANTM h80, 1.5"Tri-clamp, PH SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. With a 20 Ra surface finish and 316L construction, the groundbreaking new QUANTM electric-operated double diaphragm (EODD) pumps are the ideal solution for pharmaceutical-grade manufacturing facilities focused on meeting sustainability goals. These pharma-grade pumps offer a full electropolished finish and can be configured with USP Class VI approval to meet certification requirements for pharmaceutical applications such as bio pharmaceuticals, medical lotions and creams, organic reagent, blood products as well as alcohol and solvent transfer. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

20 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, PTFE balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$17,690.00

QUANTM PUMP, QHD-HSFF7FL--POEPSSASF21

GG HE80-1500

QUANTM PUMP, QHD-HSFF7FL--POEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,000.00

QUANTM PUMP, QHD-HSFF7FL--PSEPSSASF21

GG HE80-1501

QUANTM PUMP, QHD-HSFF7FL--PSEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,710.00

QUANTM PUMP, QHD-HSFF7FL--SPEPSSASF21

GG HE80-1502

QUANTM PUMP, QHD-HSFF7FL--SPEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Santoprene diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,610.00

QUANTM PUMP, QHD-HSFF7FL--BNEPSSASF21

GG HE80-1503

QUANTM PUMP, QHD-HSFF7FL--BNEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, BN Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Buna-N diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$14,490.00

QUANTM PUMP, QHD-HSFF8FL--POEPSSASF21

GG HE80-1504

QUANTM PUMP, QHD-HSFF8FL--POEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,170.00

QUANTM PUMP, QHD-HSFF8FL--PSEPSSASF21

GG HE80-1505

QUANTM PUMP, QHD-HSFF8FL--PSEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,870.00

QUANTM PUMP, QHD-HSFF8FL--SPEPSSASF21

GG HE80-1506

QUANTM PUMP, QHD-HSFF8FL--SPEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Santoprene diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,780.00

QUANTM PUMP, QHD-HSFF8FL--BNEPSSASF21

GG HE80-1507

QUANTM PUMP, QHD-HSFF8FL--BNEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, BN Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
Non-hazardous

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Buna-N diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$14,490.00

QUANTM PUMP, QHD-HSFF9FL--POEPSSASF21

GG HE80-1508

QUANTM PUMP, QHD-HSFF9FL--POEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,220.00

QUANTM PUMP, QHD-HSFF9FL--PSEPSSASF21

GG HE80-1509

QUANTM PUMP, QHD-HSFF9FL--PSEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,910.00

QUANTM PUMP, QHD-HSFF9FL--SPEPSSASF21

GG HE80-1510

QUANTM PUMP, QHD-HSFF9FL--SPEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Santoprene diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,800.00

QUANTM PUMP, QHD-HSFF9FL--BNEPSSASF21

GG HE80-1511

QUANTM PUMP, QHD-HSFF9FL--BNEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, BN Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Buna-N diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$14,680.00

QUANTM PUMP, QHD-HSFFAFL--POEPSSASF21

GG HE80-1512

QUANTM PUMP, QHD-HSFFAFL--POEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE Overmold diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,390.00

QUANTM PUMP, QHD-HSFFAFL--PSEPSSASF21

GG HE80-1513

QUANTM PUMP, QHD-HSFFAFL--PSEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, PTFE/Santoprene 2-Piece diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$16,120.00

QUANTM PUMP, QHD-HSFFAFL--SPEPSSASF21

GG HE80-1514

QUANTM PUMP, QHD-HSFFAFL--SPEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Santoprene diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$15,850.00

QUANTM PUMP, QHD-HSFFAFL--BNEPSSASF21

GG HE80-1515

QUANTM PUMP, QHD-HSFFAFL--BNEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 380-480 VAC 3Ph, FEP AL Center, FL Check, BN Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
Quiet operation reduces plant noise and improves employee safety and health
Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

FEP coated aluminum electric drive
380-480 VAC 3 Ph motor with 15 ft flying leads
ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

32 Ra surface finish 316L Stainless Steel fluid section with Tri-Clamp Center Port
Internal components include 316 Stainless Steel seats, 316 Stainless Steel Flapper balls, Buna-N diaphragms and EPDM manifold o-rings
EN 2.1 material certification

$14,680.00

LDX SERIES REEL, HOSE, 3/8"X50', 1/4" NPT, A/W

GG HEL012

LDX SERIES REEL, HOSE, 3/8"X50', 1/4" NPT, A/W

LDX™ Series, Air/Water/Antifreeze/WWS, 3/8 in (10 mm) Inlet, 1/4 in (6mm) Outlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT Graco’s industrial-grade LDX hose reel offers incredible value for cost-conscious workshops. Its all-metal frame and specially crafted, long-lasting components provide consistent release and retraction. Designed for smaller garages, independent repair facilities and industrial manufacturing environments. Dual Pedestal Frame - Ribbed metal for increased stability and robustness. External Swivel Housing - Quickly access swivel seal for faster repairs. Ball Bearing Swivel - Swivel designed with internal ball bearings reduces friction and ensures smooth operation. Adjustable Arm - Easily change to one of six arm positions to fit your application. Large Hose Capacity with Small Profile - Compact design accommodates up to a 50 foot (15 meter) hose to meet a wide variety of application requirements.

$555.00

LDX SERIES REEL, HOSE, 1/2" X 45', DEF

GG HEL015

LDX SERIES REEL, HOSE, 1/2" X 45', DEF

LDX™ Series, DEF, 1/2 in (13 mm) Inlet, 1/2 in X 45 ft (13 mm X 14 m) Hose, BSPT Graco’s industrial-grade LDX hose reel offers incredible value for cost-conscious workshops. Its all-metal frame and specially crafted, long-lasting components provide consistent release and retraction. Designed for smaller garages, independent repair facilities and industrial manufacturing environments. Dual Pedestal Frame - Ribbed metal for increased stability and robustness. External Swivel Housing - Quickly access swivel seal for faster repairs. Ball Bearing Swivel - Swivel designed with internal ball bearings reduces friction and ensures smooth operation. Adjustable Arm - Easily change to one of six arm positions to fit your application. Large Hose Capacity with Small Profile - Compact design accommodates up to a 45 foot (14 meter) hose to meet a wide variety of application requirements.

$875.00

HFR Lamination System, 230/1, 2:1, 50/25, C

GG HFRL12

HFR LAMINATION SYSTEM, 230/1, 2:1, 50/25, C

Graco HFRL12 2.00:1 Ratio HFR Package with 50/25 Pump

With its accuracy and repeatability, the Graco HFR lets you hit a specific ratio and volume â€“ the first time, and every time. Static, dynamic, or impingement mixing options along with positive displacement pump technology will improve throughput while reducing scrap and rework.

Application: Hydraulic fixed ratio system for two-part epoxies, silicones, adhesives

Constant pressure or constant flow rate material outputs
Lower cost than basic shot meters or gear pumps
Faster lead times â€“ configured equipment solutions delivered faster than a custom engineered solution
Precision, on-ratio dispense reduces material waste for a better bottom line
More technology for less money
Fully configurable
Stores 100 shot sizes and five sequences of 20 positions each
Compact footprint saves space in your plant
Easier maintenance with standard parts
- Eliminate costly pump rebuilds and the need for backup pumps
Intuitive, easy-to-use controls simplify training
Integrated USB lets you download process data onto a flash drive for further analysis

Model: HFR
Series: L

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPS

Amperage (A): 55
Applicator Type: Automatic

Component A Inlet Size (in): 3/4
Component A Inlet Size (mm): 19.05
Component A Outlet Size (in): 1/2
Component A Outlet Size (mm): 12.7
Component A Thread Gender: Female
Component A Thread Type: NPT
Component B Inlet Size (in): 3/4
Component B Inlet Size (mm): 19.05
Component B Outlet Size (in): 1/2
Component B Outlet Size (mm): 12.7
Component B Thread Gender: Female
Component B Thread Type: NPT

Frequency (Hz): 50/60

Includes: Hose, MD2 Valve with Adjustable Orifice Kit

Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100

Maximum Flow Rate (cc/sec): 30
Maximum Flow Rate (kg/min): 1.81
Maximum Flow Rate (lb/min): 4

Maximum Fluid Temperature (Â°C): 50
Maximum Fluid Temperature (Â°F): 120

Maximum Hose Length (ft): 15
Maximum Hose Length (m): 4.575

Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10
Maximum Working Pressure (psi): 1500
Measuring Type: Meter

Overall Depth (cm): 94.5
Overall Depth (in): 37.2
Overall Depth (mm): 945

Overall Height (cm): 147.6
Overall Height (in): 58.1
Overall Height (mm): 1476
Overall Width (cm): 131.6
Overall Width (in): 51.8
Overall Width (mm): 1316

Phase: 1

Power Rating (HP): 16.96
Power Rating (kW): 12.7
Power Rating (W): 12650
Power Source: Electric, Hydraulic

$66,570.00

HFR Lamination System, 400/3, 1.50:1, 60/40, Cs

GG HFRL22

Hfr Lamination System, 400/3, 1.50:1, 60/40, Cs

$67,550.00

HFR Silicone System, Si, 230/1, 4:1, Ss, 55/5

GG HFRS16

Hfr Silicone System, Si, 230/1, 4:1, Ss, 55/5

$131,000.00

HFR Silicone System, Si, 230/1, 1:1, Cs, No Fe

GG HFRS69

Hfr Silicone System, Si, 230/1, 1:1, Cs, No Fe

$69,600.00

HFR Silicone System, Si, 230/1, 2:1, Cs, No Fe

GG HFRS73

HFR SILICONE SYSTEM,SI,230/1,2:1,CS,NO FE

Graco HFRS73 2:1 Ratio Carbon Steel HFR Metering System without Feed Pump

With its accuracy and repeatability, the Graco HFR lets you hit a specific ratio and volume â€“ the first time, and every time. Static, dynamic, or impingement mixing options along with positive displacement pump technology will improve throughput while reducing scrap and rework.

Application: Hydraulic fixed ratio system for two-part epoxies, silicones, adhesives

Constant pressure or constant flow rate material outputs
Lower cost than basic shot meters or gear pumps
Faster lead times â€“ configured equipment solutions delivered faster than a custom engineered solution
In-person support and service through Gracoâ€™s global distribution network
Precision, on-ratio dispense reduces material waste for a better bottom line
More technology for less money
Fully configurable
Stores 100 shot sizes and five sequences of 20 positions each
Compact footprint saves space in your plant
Intuitive, easy-to-use controls simplify training
Integrated USB lets you download process data onto a flash drive for further analysis

$69,600.00

HFR Silicone System, Si, 400/3, 10:1, Cs, No F

GG HFRS90

Hfr Silicone System, Si, 400/3, 10:1, Cs, No F

$70,640.00

HFR Silicone System, Si, 230/1, 10:1, Ss, No F

GG HFRS91

Hfr Silicone System, Si, 230/1, 10:1, Ss, No F

$81,400.00

HFR Silicone System, Si, 400/3, 1:1, Cs, 55/55

GG HFRS95

Hfr Silicone System, Si, 400/3, 1:1, Cs, 55/55

$106,430.00

HFR Silicone System, Si, 230/1, 1:1, Ss, 5/5

GG HFRS98

Hfr Silicone System, Si, 230/1, 1:1, Ss, 5/5

$124,820.00

HFR Silicone System, Si, 400/3, 2:1, Cs, 55/55

GG HFRSA8

HFR SILICONE SYSTEM,SI,400/3,2:1,CS,55/55

$106,480.00

HOSE, HTD, 3/8X1/4, 50FT, 7250PSI

GG HH73215

HOSE, HTD, 3/8X1/4, 50FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 50 ft (15 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$10,400.00

HOSE, HTD, 3/8X1/4, 100FT, 7250PSI

GG HH7321X

HOSE, HTD, 3/8X1/4, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$17,650.00

HOSE, HTD, 3/8X1/4, 150FT, 7250PSI

GG HH7321Y

HOSE, HTD, 3/8X1/4, 150FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$27,580.00

HOSE, HTD, 3/8X1/4, 200FT, 7250PSI

GG HH7321Z

HOSE, HTD, 3/8X1/4, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$25,180.00

Hose, Htd, 3/8X1/4, R, 50Ft, 7250 psi

GG HH73225

HOSE, HTD, 3/8X1/4, R, 50FT, 7250

Graco HH73225 Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 50 ft (15 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$9,800.00

HOSE, HTD, 3/8X1/4, R, 100FT, 7250

GG HH7322X

HOSE, HTD, 3/8X1/4, R, 100FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$19,860.00

Hose, Htd, 3/8X1/4, R, 150Ft, 7250 psi

GG HH7322Y

HOSE, HTD, 3/8X1/4, R, 150FT, 7250

Graco HH7322Y Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 150 ft (45 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 150
Hose Length (m): 45

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$29,620.00

Hose, Htd, 3/8X1/4, R, 200Ft, 7250 psi

GG HH7322Z

HOSE, HTD, 3/8X1/4, R, 200FT, 7250

Graco HH7322Z Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 1/4 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 200
Hose Length (m): 60

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$27,910.00

Hose, Htd, 3/8 x 3/8, 50Ft, 7250 psi

GG HH73315

HOSE, HTD, 3/8X3/8, 50FT, 7250PSI

Graco HH73315 Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 50 ft (15 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$9,680.00

Hose, Htd, 3/8 x 3/8, 100Ft, 7250 psi

GG HH7331X

HOSE, HTD, 3/8X3/8, 100FT, 7250PSI

Graco HH7331X Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 100 ft (30m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 100
Hose Length (m): 30

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$18,620.00

Hose, Htd, 3/8 x 3/8, 150Ft, 7250 psi

GG HH7331Y

HOSE, HTD, 3/8X3/8, 150FT, 7250PSI

Graco HH7331Y Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 150 ft (45 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 150
Hose Length (m): 45

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$27,600.00

Hose, Htd, 3/8 x 3/8, 200Ft, 7250 psi

GG HH7331Z

HOSE, HTD, 3/8X3/8, 200FT, 7250PSI

Graco HH7331Z Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 200 ft (60 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 200
Hose Length (m): 60

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$25,420.00

Hose, Htd, 3/8 x 3/8, R, 50Ft, 7250 psi

GG HH73325

HOSE, HTD, 3/8X3/8, R, 50FT, 7250

Graco HH73325 Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 50 ft (15 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$10,430.00

Hose, Htd, 3/8 x 3/8, R, 100Ft, 7250 psi

GG HH7332X

Hose, Htd, 3/8X3/8, R, 100Ft, 7250

$19,980.00

Hose, Htd, 3/8 x 3/8, R, 150Ft, 7250 psi

GG HH7332Y

HOSE, HTD, 3/8X3/8, R, 150FT, 7250

Graco HH7332Y Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 150 ft (45 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 150
Hose Length (m): 45

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$29,810.00

Hose, Htd, 3/8 x 3/8, R, 200Ft, 7250 psi

GG HH7332Z

HOSE, HTD, 3/8X3/8, R, 200FT, 7250

Graco HH7332Z Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 200
Hose Length (m): 60

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$28,150.00

Hose, Htd, 1/2X1/4, 50Ft, 7250 psi

GG HH75215

HOSE, HTD, 1/2X1/4, 50FT, 7250PSI

Graco HH75215 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 50 ft (15 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$9,830.00

HOSE, HTD, 1/2X1/4, 100FT, 7250PSI

GG HH7521X

HOSE, HTD, 1/2X1/4, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$18,100.00

Hose, Htd, 1/2X1/4, 150Ft, 7250 psi

GG HH7521Y

HOSE, HTD, 1/2X1/4, 150FT, 7250PSI

Graco HH7521Y Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 150 ft (45 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 150
Hose Length (m): 45

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$27,410.00

HOSE, HTD, 1/2X1/4, 200FT, 7250PSI

GG HH7521Z

HOSE, HTD, 1/2X1/4, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$28,440.00

Hose, Htd, 1/2X1/4, R, 50Ft, 7250 psi

GG HH75225

HOSE, HTD, 1/2X1/4, R, 50FT, 7250

Graco HH75225 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 50 ft (15 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$10,590.00

HOSE, HTD, 1/2X1/4, R, 100FT, 7250

GG HH7522X

HOSE, HTD, 1/2X1/4, R, 100FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$21,500.00

Hose, Htd, 1/2X1/4, R, 150Ft, 7250 psi

GG HH7522Y

HOSE, HTD, 1/2X1/4, R, 150FT, 7250

Graco HH7522Y Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 150 ft (45 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 150
Hose Length (m): 45

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$30,270.00

Hose, Htd, 1/2X1/4, R, 200Ft, 7250 psi

GG HH7522Z

HOSE, HTD, 1/2X1/4, R, 200FT, 7250

Graco HH7522Z Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 200
Hose Length (m): 60

Includes: Recirculation Hoses

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$28,770.00

HOSE, HTD, 1/2X3/8, 50FT, 7250PSI

GG HH75315

HOSE, HTD, 1/2X3/8, 50FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 50 ft (15 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$10,500.00

HOSE, HTD, 1/2X3/8, 100FT, 7250PSI

GG HH7531X

HOSE, HTD, 1/2X3/8, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$20,600.00

HOSE, HTD, 1/2X3/8, 150FT, 7250PSI

GG HH7531Y

HOSE, HTD, 1/2X3/8, 150FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$29,910.00

HOSE, HTD, 1/2X3/8, 200FT, 7250PSI

GG HH7531Z

HOSE, HTD, 1/2X3/8, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$27,010.00

HOSE, HTD, 1/2X3/8, R, 50FT, 7250

GG HH75325

HOSE, HTD, 1/2X3/8, R, 50FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 50 ft (15 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$11,300.00

HOSE, HTD, 1/2X3/8, R, 100FT, 7250

GG HH7532X

HOSE, HTD, 1/2X3/8, R, 100FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$20,370.00

HOSE, HTD, 1/2X3/8, R, 150FT, 7250

GG HH7532Y

HOSE, HTD, 1/2X3/8, R, 150FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 150 ft (45 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$29,890.00

HOSE, HTD, 1/2X3/8, R, 200FT, 7250

GG HH7532Z

HOSE, HTD, 1/2X3/8, R, 200FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 200 ft (60 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$29,010.00

Hose, Htd, 1/2X3/8X1/4, 50Ft

GG HH75335

HOSE, HTD, 1/2X3/8X1/4, 50FT

Graco HH75335 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 50 ft (15 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

No vertical height limitations
7,250 psi (500 bar) pressure rating
Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
Integrated recirculation hoses available
Multiple A/B hose diameters available to achieve the desired chemical mix ratio
Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
Easily install on new or existing Graco XM or XP sprayers
Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

For Use With: Plural Component Sprayers

Hose Heating Type: Electric
Hose Length (ft): 50
Hose Length (m): 15

Maximum Working Pressure (bar): 500
Maximum Working Pressure (psi): 7250

$10,750.00

HOSE, HTD, 1/2X3/8X1/4, 100FT

GG HH7533X

HOSE, HTD, 1/2X3/8X1/4, 100FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$19,390.00

HOSE, HTD, 1/2X3/8X1/4, 150FT

GG HH7533Y

HOSE, HTD, 1/2X3/8X1/4, 150FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$28,720.00

HOSE, HTD, 1/2X3/8X1/4, 200FT

GG HH7533Z

HOSE, HTD, 1/2X3/8X1/4, 200FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$28,540.00

HOSE, HTD, 1/2X3/8X1/4, R, 50FT

GG HH75345

HOSE, HTD, 1/2X3/8X1/4, R, 50FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 50 ft (15 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

$13,030.00