GRACO INC. S10595
GRACO INC. S10595 branded products
KIT, LOWER, 290CC, KING-C
GG 19D954
GG 19D954
KIT, LOWER, 290CC, KING-C
Contractor King Endurance Pump Lower, 290CC Genuine Graco Endurance Pumps lead the industry in durability and ease of installation. Keep a spare on hand to minimize downtime in the field. Proven Design and Performance- Chromex Rod and Stainless Steel cylinder for maximum life and performance
- Xtreme Seal UHMWPE & Leather packings for ultimate durability with most materials
- QuickAccess intake valve for easy access to lower ball check
$3,840.00
ULTRA SPRAYER, 695 XT, STD, NA
GG 19F545
GG 19F545
ULTRA SPRAYER, 695 XT, STD, NA
Ultra 695 XT Standard Series Electric Airless Sprayer, Hi-Boy The Ultra 695 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.1 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 695 XT Standard is sure to change the way you spray. Xtreme Reliability. The all new XT Standard Series large electric sprayers are the most reliable pumps for contractors looking for proven performance on the industry's most silent spraying platform. Upgrade to an XT ProContractor for more profit-saving features, or upgrade later with ALL NEW Modular Accessory Kits! Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
- Contractor PC Gun & RAC X LP 517 SwitchTip
$6,490.00
ULTRA SPRAYER, 1095 XT, STD, NA
GG 19F546
GG 19F546
ULTRA SPRAYER, 1095 XT, STD, NA
Ultra 1095 XT Standard Series Electric Airless Sprayer, Hi-Boy The Ultra 1095 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.7 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 1095 XT Standard is sure to change the way you spray. Xtreme Reliability. The all new XT Standard Series large electric sprayers are the most reliable pumps for contractors looking for proven performance on the industry's most silent spraying platform. Upgrade to an XT ProContractor for more profit-saving features, or upgrade later with ALL NEW Modular Accessory Kits! Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
- Contractor PC Gun & RAC X LP 517 SwitchTip
$10,740.00
ULTRA SPRAYER, 695 XT, PRO, NA
GG 19F547
GG 19F547
ULTRA SPRAYER, 695 XT, PRO, NA
Ultra 695 XT ProContractor Series Electric Airless Sprayer, Hi-Boy The Ultra 695 XT ProContractor Series delivers an airless spray experience like no other. Featuring a 2.1 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and an Endurance Vortex MAXLIFE pump, the Ultra 695 XT ProContractor is guaranteed to last! Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Compatible with Contractor PowerShot XT Gun
- LED Digital Display visible in even the toughest spraying conditions
- Endurance Vortex MAXLIFE Rod lasts 6X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Easy hose management
- Deploy and rewind up to 300 feet (90 meters) of hose in seconds
- No twisting, kinking, and coiling
- Use only the hose you need — the rest stays on the reel
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Streamline your business
- Track every sprayer: Exact location & hourly productivity
- Know job progress: On demand productivity facts and reporting from anywhere
- Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
- Prevents damage by shutting off pump when it's time to refill
- Contractor PC Gun & RAC X LP 517 SwitchTip
$7,710.00
ULTRA SPRAYER, 1095 XT, PRO, NA
GG 19F548
GG 19F548
ULTRA SPRAYER, 1095 XT, PRO, NA
Ultra 1095 XT ProContractor Series Electric Airless Sprayer, Hi-Boy The Ultra 1095 XT ProContractor Series delivers an airless spray experience like no other. Featuring a 2.7 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and an Endurance Vortex MAXLIFE EXTREME pump, the Ultra 1095 XT ProContractor is guaranteed to last! Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Compatible with Contractor PowerShot XT Gun
- LED Digital Display visible in even the toughest spraying conditions
- Endurance Vortex MAXLIFE EXTREME Rod lasts 6X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Easy hose management
- Deploy and rewind up to 300 feet (90 meters) of hose in seconds
- No twisting, kinking, and coiling
- Use only the hose you need — the rest stays on the reel
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Streamline your business
- Track every sprayer: Exact location & hourly productivity
- Know job progress: On demand productivity facts and reporting from anywhere
- Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
- Prevents damage by shutting off pump when it's time to refill
- Contractor PC Gun & RAC X LP 517 SwitchTip
$11,970.00
MARK SPRAYER, V XT, STD, NA
GG 19F550
GG 19F550
MARK SPRAYER, V XT, STD, NA
Mark V XT HD 3-in-1 Standard Series Electric Airless Sprayer, Hi-Boy The Mark V XT Standard Series delivers an airless spray experience like no other. Featuring a 2.9 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Mark V XT Standard is sure to change the way you spray. Xtreme Reliability. The all new XT Standard Series large electric sprayers are the most reliable pumps for contractors looking for proven performance on the industry's most silent spraying platform. Upgrade to an XT ProContractor for more profit-saving features, or upgrade later with ALL NEW Modular Accessory Kits! Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
$14,540.00
MARK SPRAYER, IV XT, PRO, NA
GG 19F551
GG 19F551
MARK SPRAYER, IV XT, PRO, NA
Mark IV XT HD 3-in-1 ProContractor Series Electric Airless Sprayer, Hi-Boy The Mark IV XT ProContractor Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and an Endurance Vortex MAXLIFE pump, the Mark IV XT ProContractor is guaranteed to last! Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex MAXLIFE Rod lasts 6X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Easy hose management
- Deploy and rewind up to 300 feet (90 meters) of hose in seconds
- No twisting, kinking, and coiling
- Use only the hose you need — the rest stays on the reel
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Streamline your business
- Track every sprayer: Exact location & hourly productivity
- Know job progress: On demand productivity facts and reporting from anywhere
- Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
- Prevents damage by shutting off pump when it's time to refill
- CrushProof Inlet Strainer
- FlatProof Tires
- Flex Plus Gun & RAC X LTX SwitchTip
$10,470.00
MARK SPRAYER, V XT, PRO, NA
GG 19F552
GG 19F552
MARK SPRAYER, V XT, PRO, NA
Mark V XT HD 3-in-1 ProContractor Series Electric Airless Sprayer, Hi-Boy The Mark V XT ProContractor Series delivers an airless spray experience like no other. Featuring a 2.9 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and an Endurance Vortex MAXLIFE EXTREME pump, the Mark V XT ProContractor is guaranteed to last! Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex MAXLIFE EXTREME Rod lasts 6X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Easy hose management
- Deploy and rewind up to 300 feet (90 meters) of hose in seconds
- No twisting, kinking, and coiling
- Use only the hose you need — the rest stays on the reel
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Streamline your business
- Track every sprayer: Exact location & hourly productivity
- Know job progress: On demand productivity facts and reporting from anywhere
- Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
- Prevents damage by shutting off pump when it's time to refill
- CrushProof Inlet Strainer
- FlatProof Tires
- Heavy-Duty Blue Texture Gun & RAC X LTX SwitchTip
$15,760.00
MARK SPRAYER, IV XT, STD, NA
GG 19F549
GG 19F549
MARK SPRAYER, IV XT, STD, NA
Mark IV XT HD 3-in-1 Standard Series Electric Airless Sprayer, Hi-Boy The Mark IV XT Standard Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Mark IV XT Standard is sure to change the way you spray. Xtreme Reliability. The all new XT Standard Series large electric sprayers are the most reliable pumps for contractors looking for proven performance on the industry's most silent spraying platform. Upgrade to an XT ProContractor for more profit-saving features, or upgrade later with ALL NEW Modular Accessory Kits! Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
$9,260.00
ULTRA SPRAYER, 695 XT, LO-BOY, NA
GG 19F553
GG 19F553
ULTRA SPRAYER, 695 XT, LO-BOY, NA
Ultra 695 XT Standard Series Electric Airless Sprayer, Lo-Boy The Ultra 695 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.1 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 695 XT Standard is sure to change the way you spray. Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
- Contractor PC Gun & RAC X LP 517 SwitchTip
$6,490.00
ULTRA SPRAYER, 795 XT, PRO, NA
GG 19F711
GG 19F711
ULTRA SPRAYER, 795 XT, PRO, NA
Ultra 795 XT ProContractor Series Electric Airless Sprayer, Hi-Boy The Ultra 795 XT ProContractor Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and an Endurance Vortex MAXLIFE pump, the Ultra 795 XT ProContractor is guaranteed to last! Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Compatible with Contractor PowerShot XT Gun
- LED Digital Display visible in even the toughest spraying conditions
- Endurance Vortex MAXLIFE Rod lasts 6X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Easy hose management
- Deploy and rewind up to 300 feet (90 meters) of hose in seconds
- No twisting, kinking, and coiling
- Use only the hose you need — the rest stays on the reel
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Streamline your business
- Track every sprayer: Exact location & hourly productivity
- Know job progress: On demand productivity facts and reporting from anywhere
- Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
- Prevents damage by shutting off pump when it's time to refill
- Contractor PC Gun & RAC X LP 517 SwitchTip
$9,880.00
THERM-O-FLOW HOSE, HEATED, 4-FT, #8, 3000 PSI
GG 19M400
GG 19M400
THERM-O-FLOW HOSE, HEATED, 4-FT, #8, 3000 PSI
4 ft. (1.2 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C) $2,750.00
THERM-O-FLOW HOSE, HEATED, 10-FT, #6, 3000 PSI
GG 19M423
GG 19M423
THERM-O-FLOW HOSE, HEATED, 10-FT, #6, 3000 PSI
10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 6 (0.308 in. / 7.8 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C) $3,220.00
Solotech St10 Pump, I10-Lc-Nr-Ss-A1-A1-0
GG 19X001
GG 19X001
SOLOTECH ST10 PUMP, I10-LC-NR-SS-A1-A1-0
Graco 19X001 SoloTech i10 Low Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,150.00
Solotech St10 Pump, I10-Lc-Cs-Ss-A1-A1-0
GG 19X002
GG 19X002
SOLOTECH ST10 PUMP, I10-LC-CS-SS-A1-A1-0
Graco 19X002 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$5,970.00
Solotech St10 Pump, I10-Lc-Cs-Pv-A1-A1-0
GG 19X003
GG 19X003
SOLOTECH ST10 PUMP, I10-LC-CS-PV-A1-A1-0
Graco 19X003 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,220.00
Solotech St10 Pump, I10-Lc-Cs-Hs-A1-A1-0
GG 19X004
GG 19X004
SOLOTECH ST10 PUMP, I10-LC-CS-HS-A1-A1-0
Graco 19X004 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$7,290.00
Solotech St10 Pump, I10-Lc-Bn-Ss-A1-A1-0
GG 19X005
GG 19X005
SOLOTECH ST10 PUMP, I10-LC-BN-SS-A1-A1-0
Graco 19X005 SoloTech i10 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$5,850.00
Solotech St10 Pump, I10-Lc-Ep-Ss-A1-A1-0
GG 19X006
GG 19X006
Solotech St10 Pump, I10-Lc-Ep-Ss-A1-A1-0 $5,850.00
Solotech St10 Pump, I10-Lc-Ep-Pv-A1-A1-0
GG 19X007
GG 19X007
SOLOTECH ST10 PUMP, I10-LC-EP-PV-A1-A1-0
Graco 19X007 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,060.00
Solotech St10 Pump, I10-Lc-Ep-Hs-A1-A1-0
GG 19X008
GG 19X008
SOLOTECH ST10 PUMP, I10-LC-EP-HS-A1-A1-0
Graco 19X008 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$7,160.00
Solotech St10 Pump, I10-Ln-Nr-Ss-A1-A1-0
GG 19X009
GG 19X009
SOLOTECH ST10 PUMP, I10-LN-NR-SS-A1-A1-0
Graco 19X009 SoloTech i10 Low Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$5,850.00
Solotech St10 Pump, I10-Ln-Cs-Ss-A1-A1-0
GG 19X010
GG 19X010
SOLOTECH ST10 PUMP, I10-LN-CS-SS-A1-A1-0
Graco 19X010 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,270.00
Solotech St10 Pump, I10-Ln-Cs-Pv-A1-A1-0
GG 19X011
GG 19X011
SOLOTECH ST10 PUMP, I10-LN-CS-PV-A1-A1-0
Graco 19X011 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,220.00
Solotech St10 Pump, I10-Ln-Cs-Hs-A1-A1-0
GG 19X012
GG 19X012
SOLOTECH ST10 PUMP, I10-LN-CS-HS-A1-A1-0
Graco 19X012 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$7,290.00
Solotech St10 Pump, I10-Ln-Ep-Ss-A1-A1-0
GG 19X013
GG 19X013
SOLOTECH ST10 PUMP, I10-LN-EP-SS-A1-A1-0
Graco 19X013 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$5,850.00
Solotech St10 Pump, I10-Ln-Ep-Pv-A1-A1-0
GG 19X014
GG 19X014
SOLOTECH ST10 PUMP, I10-LN-EP-PV-A1-A1-0
Graco 19X014 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,060.00
Solotech St10 Pump, I10-Ln-Bn-Ss-A1-A1-0
GG 19X016
GG 19X016
SOLOTECH ST10 PUMP, I10-LN-BN-SS-A1-A1-0
Graco 19X016 SoloTech i10 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.08
- Gear Ratio: 157.43:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.013
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 2-11
$6,150.00
SOLOTECH ST10 PUMP, I10, HC-NR-SS-A1-A1-0
GG 19X017
GG 19X017
SOLOTECH ST10 PUMP, I10, HC-NR-SS-A1-A1-0
SoloTech™ i10 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $5,850.00
SOLOTECH ST10 PUMP, I10, HC-CS-SS-A1-A1-0
GG 19X018
GG 19X018
SOLOTECH ST10 PUMP, I10, HC-CS-SS-A1-A1-0
SoloTech™ i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,270.00
Solotech St10 Pump, I10, Hc-Cs-Pv-A1-A1-0
GG 19X019
GG 19X019
SOLOTECH ST10 PUMP, I10, HC-CS-PV-A1-A1-0
Graco 19X019 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.646
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$6,220.00
Solotech St10 Pump, I10, Hc-Cs-Hs-A1-A1-0
GG 19X020
GG 19X020
SOLOTECH ST10 PUMP, I10, HC-CS-HS-A1-A1-0
Graco 19X020 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.646
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$7,290.00
Solotech St10 Pump, I10, Hc-Bn-Ss-A1-A1-0
GG 19X021
GG 19X021
SOLOTECH ST10 PUMP, I10, HC-BN-SS-A1-A1-0
Graco 19X021 SoloTech i10 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.646
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$5,850.00
SOLOTECH ST10 PUMP, I10-HC-EP-SS-A1-A1-0
GG 19X022
GG 19X022
SOLOTECH ST10 PUMP, I10-HC-EP-SS-A1-A1-0
SoloTech™ i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,150.00
Solotech St10 Pump, I10-Hc-Ep-Pv-A1-A1-0
GG 19X023
GG 19X023
Solotech St10 Pump, I10-Hc-Ep-Pv-A1-A1-0 $6,060.00
Solotech St10 Pump, I10-Hc-Ep-Hs-A1-A1-0
GG 19X024
GG 19X024
SOLOTECH ST10 PUMP, I10-HC-EP-HS-A1-A1-0
Graco 19X024 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.646
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$7,160.00
Solotech St10 Pump, I10-Hn-Nr-Ss-A1-A1-0
GG 19X025
GG 19X025
SOLOTECH ST10 PUMP, I10-HN-NR-SS-A1-A1-0
Graco 19X025 SoloTech i10 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$6,150.00
SOLOTECH ST10 PUMP, I10-HN-CS-SS-A1-A1-0
GG 19X026
GG 19X026
SOLOTECH ST10 PUMP, I10-HN-CS-SS-A1-A1-0
SoloTech™ i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & NEMA ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,270.00
Solotech St10 Pump, I10-Hn-Cs-Pv-A1-A1-0
GG 19X027
GG 19X027
SOLOTECH ST10 PUMP, I10-HN-CS-PV-A1-A1-0
Graco 19X027 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$6,530.00
Solotech St10 Pump, I10-Hn-Cs-Hs-A1-A1-0
GG 19X028
GG 19X028
SOLOTECH ST10 PUMP, I10-HN-CS-HS-A1-A1-0
Graco 19X028 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$7,290.00
SOLOTECH ST10 PUMP, I10-HN-EP-SS-A1-A1-0
GG 19X029
GG 19X029
SOLOTECH ST10 PUMP, I10-HN-EP-SS-A1-A1-0
SoloTech™ i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & NEMA ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,150.00
Solotech St10 Pump, I10-Hn-Ep-Pv-A1-A1-0
GG 19X030
GG 19X030
SOLOTECH ST10 PUMP, I10-HN-EP-PV-A1-A1-0
Graco 19X030 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$6,060.00
Solotech St10 Pump, I10-Hn-Ep-Hs-A1-A1-0
GG 19X031
GG 19X031
SOLOTECH ST10 PUMP, I10-HN-EP-HS-A1-A1-0
Graco 19X031 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$7,160.00
Solotech St10 Pump, I10-Hn-Bn-Ss-A1-A1-0
GG 19X032
GG 19X032
SOLOTECH ST10 PUMP, I10-HN-BN-SS-A1-A1-0
Graco 19X032 SoloTech i10 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.646
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.108
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 46
- Overall Height (in): 18.2
- Overall Height (mm): 462
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 15-92
$5,850.00
Solotech St10 Pump, I10-Mc-Nr-Ss-A1-A1-0
GG 19X033
GG 19X033
SOLOTECH ST10 PUMP, I10-MC-NR-SS-A1-A1-0
Graco 19X033 SoloTech i10 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,150.00
Solotech St10 Pump, I10-Mc-Cs-Ss-A1-A1-0
GG 19X034
GG 19X034
SOLOTECH ST10 PUMP, I10-MC-CS-SS-A1-A1-0
Graco 19X034 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$5,970.00
Solotech St10 Pump, I10-Mc-Cs-Pv-A1-A1-0
GG 19X035
GG 19X035
SOLOTECH ST10 PUMP, I10-MC-CS-PV-A1-A1-0
Graco 19X035 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,220.00
Solotech St10 Pump, I10-Mc-Cs-Hs-A1-A1-0
GG 19X036
GG 19X036
SOLOTECH ST10 PUMP, I10-MC-CS-HS-A1-A1-0
Graco 19X036 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$7,290.00
Solotech St10 Pump, I10-Mc-Bn-Ss-A1-A1-0
GG 19X037
GG 19X037
SOLOTECH ST10 PUMP, I10-MC-BN-SS-A1-A1-0
Graco 19X037 SoloTech i10 Mid Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$5,850.00
SOLOTECH ST10 PUMP, I10-MC-EP-SS-A1-A1-0
GG 19X038
GG 19X038
SOLOTECH ST10 PUMP, I10-MC-EP-SS-A1-A1-0
SoloTech™ i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC ConnectionGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,150.00
Solotech St10 Pump, I10-Mc-Ep-Pv-A1-A1-0
GG 19X039
GG 19X039
SOLOTECH ST10 PUMP, I10-MC-EP-PV-A1-A1-0
Graco 19X039 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,060.00
Solotech St10 Pump, I10-Mc-Ep-Hs-A1-A1-0
GG 19X040
GG 19X040
SOLOTECH ST10 PUMP, I10-MC-EP-HS-A1-A1-0
Graco 19X040 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$7,160.00
Solotech St10 Pump, I10-Mn-Nr-Ss-A1-A1-0
GG 19X041
GG 19X041
SOLOTECH ST10 PUMP, I10-MN-NR-SS-A1-A1-0
Graco 19X041 SoloTech i10 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,150.00
Solotech St10 Pump, I10-Mn-Cs-Ss-A1-A1-0
GG 19X042
GG 19X042
SOLOTECH ST10 PUMP, I10-MN-CS-SS-A1-A1-0
Graco 19X042 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$5,970.00
Solotech St10 Pump, I10-Mn-Cs-Pv-A1-A1-0
GG 19X043
GG 19X043
SOLOTECH ST10 PUMP, I10-MN-CS-PV-A1-A1-0
Graco 19X043 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,220.00
Solotech St10 Pump, I10-Mn-Cs-Hs-A1-A1-0
GG 19X044
GG 19X044
SOLOTECH ST10 PUMP, I10-MN-CS-HS-A1-A1-0
Graco 19X044 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$7,290.00
Solotech St10 Pump, I10-Mn-Ep-Ss-A1-A1-0
GG 19X045
GG 19X045
SOLOTECH ST10 PUMP, I10-MN-EP-SS-A1-A1-0
Graco 19X045 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$5,850.00
Solotech St10 Pump, I10-Mn-Ep-Pv-A1-A1-0
GG 19X046
GG 19X046
SOLOTECH ST10 PUMP, I10-MN-EP-PV-A1-A1-0
Graco 19X046 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,060.00
Solotech St10 Pump, I10-Mn-Ep-Hs-A1-A1-0
GG 19X047
GG 19X047
SOLOTECH ST10 PUMP, I10-MN-EP-HS-A1-A1-0
Graco 19X047 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$7,160.00
Solotech St10 Pump, I10-Mn-Bn-Ss-A1-A1-0
GG 19X048
GG 19X048
SOLOTECH ST10 PUMP, I10-MN-BN-SS-A1-A1-0
Graco 19X048 SoloTech i10 Mid Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$5,850.00
Solotech St23 Pump, I23-Lc-Nr-Ss-A1-A1-0
GG 19X049
GG 19X049
SOLOTECH ST23 PUMP, I23-LC-NR-SS-A1-A1-0
Graco 19X049 SoloTech i23 Low Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,420.00
Solotech St23 Pump, I23-Lc-Cs-Ss-A1-A1-0
GG 19X050
GG 19X050
SOLOTECH ST23 PUMP, I23-LC-CS-SS-A1-A1-0
Graco 19X050 SoloTech i23 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,640.00
Solotech St23 Pump, I23-Lc-Cs-Pv-A1-A1-0
GG 19X051
GG 19X051
SOLOTECH ST23 PUMP, I23-LC-CS-PV-A1-A1-0
Graco 19X051 SoloTech i23 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,860.00
Solotech St23 Pump, I23-Lc-Ep-Ss-A1-A1-0
GG 19X052
GG 19X052
SOLOTECH ST23 PUMP, I23-LC-EP-SS-A1-A1-0
Graco 19X052 SoloTech i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,790.00
Solotech St23 Pump, I23-Lc-Ep-Pv-A1-A1-0
GG 19X053
GG 19X053
SOLOTECH ST23 PUMP, I23-LC-EP-PV-A1-A1-0
Graco 19X053 SoloTech i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,660.00
Solotech St23 Pump, I23-Lc-Bn-Ss-A1-A1-0
GG 19X054
GG 19X054
SOLOTECH ST23 PUMP, I23-LC-BN-SS-A1-A1-0
Graco 19X054 SoloTech i23 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,420.00
Solotech St23 Pump, I23-Lc-Ep-Hs-A1-A1-0
GG 19X056
GG 19X056
SOLOTECH ST23 PUMP, I23-LC-EP-HS-A1-A1-0
Graco 19X056 SoloTech i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$9,120.00
Solotech St23 Pump, I23-Ln-Nr-Ss-A1-A1-0
GG 19X057
GG 19X057
SOLOTECH ST23 PUMP, I23-LN-NR-SS-A1-A1-0
Graco 19X057 SoloTech i23 Low Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,420.00
Solotech St23 Pump, I23-Ln-Cs-Ss-A1-A1-0
GG 19X058
GG 19X058
Solotech St23 Pump, I23-Ln-Cs-Ss-A1-A1-0 $7,640.00
Solotech St23 Pump, I23-Ln-Cs-Pv-A1-A1-0
GG 19X059
GG 19X059
SOLOTECH ST23 PUMP, I23-LN-CS-PV-A1-A1-0
Graco 19X059 SoloTech i23 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,860.00
Solotech St23 Pump, I23-Ln-Cs-Hs-A1-A1-0
GG 19X060
GG 19X060
SOLOTECH ST23 PUMP, I23-LN-CS-HS-A1-A1-0
Graco 19X060 SoloTech i23 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$9,330.00
Solotech St23 Pump, I23-Ln-Ep-Ss-A1-A1-0
GG 19X061
GG 19X061
SOLOTECH ST23 PUMP, I23-LN-EP-SS-A1-A1-0
Graco 19X061 SoloTech i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,790.00
SOLOTECH ST23 PUMP, I23-LN-EP-PV-A1-A1-0
GG 19X062
GG 19X062
SOLOTECH ST23 PUMP, I23-LN-EP-PV-A1-A1-0
SoloTech™ i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA ConnectionGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $8,050.00
SOLOTECH ST23 PUMP, I23-LN-EP-HS-A1-A1-0
GG 19X063
GG 19X063
SOLOTECH ST23 PUMP, I23-LN-EP-HS-A1-A1-0
SoloTech™ i23 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & NEMA ConnectionGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $9,570.00
Solotech St23 Pump, I23-Ln-Bn-Ss-A1-A1-0
GG 19X064
GG 19X064
SOLOTECH ST23 PUMP, I23-LN-BN-SS-A1-A1-0
Graco 19X064 SoloTech i23 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.572
- Gear Ratio: 157:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.095
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,420.00
Solotech St23 Pump, I23-Hc-Nr-Ss-A1-A1-0
GG 19X065
GG 19X065
SOLOTECH ST23 PUMP, I23-HC-NR-SS-A1-A1-0
Graco 19X065 SoloTech i23 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 4.705
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,790.00
Solotech St23 Pump, I23-Hc-Cs-Ss-A1-A1-0
GG 19X066
GG 19X066
Solotech St23 Pump, I23-Hc-Cs-Ss-A1-A1-0 $8,020.00
Solotech St23 Pump, I23-Hc-Cs-Pv-A1-A1-0
GG 19X067
GG 19X067
SOLOTECH ST23 PUMP, I23-HC-CS-PV-A1-A1-0
Graco 19X067 SoloTech i23 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 4.705
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,860.00
SOLOTECH ST23 PUMP, I23-HC-EP-SS-A1-A1-0
GG 19X068
GG 19X068
SOLOTECH ST23 PUMP, I23-HC-EP-SS-A1-A1-0
SoloTech™ i23 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC ConnectionGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $7,420.00
SOLOTECH ST23 PUMP, I23-HC-EP-PV-A1-A1-0
GG 19X069
GG 19X069
SOLOTECH ST23 PUMP, I23-HC-EP-PV-A1-A1-0
SoloTech™ i23 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & IEC ConnectionGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $8,050.00
Solotech St23 Pump, I23-Hc-Bn-Ss-A1-A1-0
GG 19X070
GG 19X070
SOLOTECH ST23 PUMP, I23-HC-BN-SS-A1-A1-0
Graco 19X070 SoloTech i23 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 4.705
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,420.00
Solotech St23 Pump, I23-Hc-Cs-Hs-A1-A1-0
GG 19X071
GG 19X071
SOLOTECH ST23 PUMP, I23-HC-CS-HS-A1-A1-0
Graco 19X071 SoloTech i23 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 4.705
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$9,330.00
Solotech St23 Pump, I23-Hc-Ep-Hs-A1-A1-0
GG 19X072
GG 19X072
SOLOTECH ST23 PUMP, I23-HC-EP-HS-A1-A1-0
Graco 19X072 SoloTech i23 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 4.705
- Gear Ratio: 19.13:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: EPDM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$9,120.00
Solotech St23 Pump, I23-Hn-Nr-Ss-A1-A1-0
GG 19X073
GG 19X073
SOLOTECH ST23 PUMP, I23-HN-NR-SS-A1-A1-0
Graco 19X073 SoloTech i23 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 4.705
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,790.00
Solotech St23 Pump, I23-Hn-Cs-Ss-A1-A1-0
GG 19X074
GG 19X074
SOLOTECH ST23 PUMP, I23-HN-CS-SS-A1-A1-0
Graco 19X074 SoloTech i23 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 4.705
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$7,640.00
Solotech St23 Pump, I23-Hn-Cs-Pv-A1-A1-0
GG 19X075
GG 19X075
Solotech St23 Pump, I23-Hn-Cs-Pv-A1-A1-0 $8,260.00
Solotech St23 Pump, I23-Hn-Cs-Hs-A1-A1-0
GG 19X076
GG 19X076
SOLOTECH ST23 PUMP, I23-HN-CS-HS-A1-A1-0
Graco 19X076 SoloTech i23 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection
Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i23
- Application: Industrial
- Barb Material: Hastelloy
- Flow Rate (GPM): 4.705
- Gear Ratio: 18.24:1
- Hose Diameter (cm): 2.3
- Hose Diameter (in): 0.91
- Hose Diameter (mm): 23
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1
- Inlet Size (mm): 25
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 4.5
- Maximum Flow Rate (L/min): 17.0
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.785
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 10.8
- Outlet Size (in): 4.25
- Outlet Size (mm): 108
- Overall Width (cm): 44
- Overall Width (in): 17.2
- Overall Width (mm): 437
- Pump Speed (RPM): 2-94
$9,330.00