GRACO INC. S10595

GG 26B711

GG 26B598

GG 26B703

GG 26B700

KIT,FLUID CARTRIDGE,PERFORMAA

GG 26B706

GG 26B701

GG 26B618

AGITATOR, 6:1 GEAR REDUCTION

Graco 26B618 Back-Geared Radial Piston Agitator, In-Drum, heavy duty, 2 inch Bung Mount

Speed up savings when agitating high viscosity material. The radial piston air motor that powers this back-geared agitator uses up to 85 percent less compressed air than a comparable rotary vane motor.

• Installs quickly for immediate cost savings
• Needs no air line lubrication to keep running well
• Operates more quietly than comparable rotary vane agitator air motors

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• For Use With: 55 Gallon (208 Liter) Drum

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 83

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

• Power Rating (HP): 0.16

GG 26B720

GG 26B712

GG 26B721

GG 26B727

GG 26B736

KIT, TOOL, AUTO GUN ALIGNMENT

Graco 26B736 Graco Gauge alignment tool for automatic air-assisted spray gun air caps

Precise air cap orientation is critical to automatic finishing, especially in flat line systems. Use this tool to set and keep the air cap of your PerformAA Auto Air Assist Spray Gun at the exact angle needed to optimize spray performance.

• The Graco Gauge is unique in wood and metal finishing, no other automatic air assist sprayer has this accessory.

GG 26B800

GG 26B801

GG 26B867

GG 26B868

GG 26B869

GG 26B871

GG 26B914

GG 26B915

GG 26C051

GG 26C064

CHARGER, WOE WITH CHAMBER AND BOWL

Graco 26C064 Waste Oil Evacuation System with 24 gal (90 l) Steel Tank, Suction Probes, Sight Glass, Oil Drain Funnel and Adapters

For shops requiring flexibility when it comes to removing used fluids, use Graco's multi-purpose used oil evacuation system.

• Large Offset Collection Pan - Wide offset collection bowl prevents splashing.
• Vacuum Gauge - Ensure peak performance with easy-to-read vacuum gauge.
• Easy to Drain- Pressurize using shop air for easy oil evacuation.
• Large 24 Gallon (90 Liter) Capacity Receiver - Perfect for small to large shops without an evacuation system.
• Sight Glass - Inspect oil quality via large, clear evacuation chamber and verify amount extracted.

• Model: Oil Ace

• Compatible Fluid: Used Oil, ATF

• Maximum Operating Temperature ( degree C): 90
• Maximum Operating Temperature ( degree F): 194

• Minimum Operating Temperature ( degree C): -1
• Minimum Operating Temperature ( degree F): 30

• Overall Height (cm): 150 to 180
• Overall Height (in): 59.0 to 70.8
• Overall Length (cm): 61
• Overall Length (in): 24
• Overall Length (mm): 609.6
• Overall Width (cm): 40.6
• Overall Width (in): 16
• Overall Width (mm): 406.4000

GG 26C092

GG 26C116

GG 26C121

GG 26C122

GG 26C171

GG 26C169

GG 26C160

REGULATOR,PRESSURE,FLUID,SST(5/100

GG 26C184

GG 26C186

GG 26C185

GG 26C276

GG 26C283

GG 26C288

KIT, PD3K REMOTE MAN, DVM LP

Graco 26C288 ProMix PD2K Three-port Low Pressure Remote Mix Manifold Kit

Manifold 26C288 is only used with the ProMix PD3K+ system

• Model: ProMix
• Series: PD2K

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (MPa): 2.1
• Maximum Working Pressure (psi): 300

GG 26C299

GG 26C354

SD SERIES SDP8 VALVE, FC, 1/2NPT, FLEX, OIL

Graco 26C354 SDP8 Series Electronic Preset Oil Meter - Flexible Extension - 1/2 in. (13 mm) Inlet

Graco's premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

• Upgradeable - SD Preset meters are compatible with PULSE FC fluid control system
• Large, Intuitive Display - high-contrast display for low and bright light conditions
• Long valve life - cartridge spool valve specifically designed to reduce wear and reduce costly down time
• Reliable - time-tested Graco engineering
• Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
• Long battery life - uses 4 AA easy-to-replace batteries

• Model: SDP8

• Compatible Material: Oil, ATF

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Flexible Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Recorded Dispense: 9999

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 103.4
• Maximum Working Pressure (kPa): 10340
• Maximum Working Pressure (MPa): 10.3
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 2.4
• Metering Gun Weight (lb): 5.3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.9

• Minimum Operating Temperature ( degree C): -16
• Minimum Operating Temperature ( degree F): 4

• Nozzle Type: Oil Automatic Quick-Close

• Outlet Thread Type: Straight Thread O-Ring Boss

• Overall Height (cm): 14.6
• Overall Height (in): 5.75
• Overall Height (mm): 146
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9.5
• Overall Width (in): 3.75
• Overall Width (mm): 95

• Product Type: Meter

• Recommended Environment: Indoor

GG 26C355

SD SERIES SDP8 VALVE, FC, 1/2NPT, FLEX, AF

Graco 26C355 SDP8 Series Electronic Preset Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet

Graco's premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

• Upgradeable - SD Preset meters are compatible with PULSE FC fluid control system
• Large, Intuitive Display - high-contrast display for low and bright light conditions
• Long valve life - cartridge spool valve specifically designed to reduce wear and reduce costly down time
• Reliable - time-tested Graco engineering
• Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
• Long battery life - uses 4 AA easy-to-replace batteries

• Model: SDP8

• Compatible Material: Antifreeze, Oil, ATF

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Flexible Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Recorded Dispense: 9999

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 103.4
• Maximum Working Pressure (kPa): 10340
• Maximum Working Pressure (MPa): 10.3
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 2.4
• Metering Gun Weight (lb): 5.3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.9

• Minimum Operating Temperature ( degree C): -16
• Minimum Operating Temperature ( degree F): 4

• Nozzle Type: Oil Automatic Quick-Close

• Outlet Thread Type: Straight Thread O-Ring Boss

• Overall Height (cm): 14.6
• Overall Height (in): 5.75
• Overall Height (mm): 146
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9.5
• Overall Width (in): 3.75
• Overall Width (mm): 95

• Product Type: Meter

• Recommended Environment: Indoor

GG 24Z962

KIT, COVER, FRONT, NO LOGO, CLEAR

Graco 24Z962 Electric Grease Jockey Pump Protective Pump Cover

• Protective pump cover

• Model: Grease Jockey

• For Use With: Grease Jockey Pumps

• Number of Pieces: 3

GG 24Z834

T3 PUMP, CS

Graco 24Z834 T3 Supply Pump (Carbon Steel): 3:1 Fluid to Air Ratio

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco's proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump - using less air pressure to provide the same fluid pressure required.

• Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
• More quiet - Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
• Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching

  is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical

  reversing mechanism in the air-motor

• Model: T3
• Series: Carbon Steel

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Compatible Material: Polyurethane Foam, Polyurea

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Material: Carbon Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (MPa): 0.69
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 4.5
• Maximum Flow Rate (L/min): 17.03

• Maximum Operating Temperature ( degree C): 88
• Maximum Operating Temperature ( degree F): 190

• Maximum Working Pressure (bar): 21.7
• Maximum Working Pressure (kPa): 2170
• Maximum Working Pressure (MPa): 2.2
• Maximum Working Pressure (psi): 315

• Package Options: Bare

• Pump Ratio: 3:1

GG 253032

GG 253215

KIT, REPAIR, BRG, HELICAL FLWMTR

KIT INCLUDES: HOUSING, MIDDLE, HELICAL GEAR MTR [QTY. 1], INSERT, BEARING, HELICAL GEAR MTR [QTY. 2], INSERT, BEARING, HELICAL GEAR MTR [QTY. 1], BEARING, GEAR [QTY. 3], BALL, BEARING [QTY. 3], O-RING, SEAL, HELICAL GEAR METER [QTY. 2], LUBRICANT, GREASE [QTY. 1], PIN, DOWEL, .550 in. [QTY. 2], PIN, DOWEL, .750 in. [QTY. 2]

GG 253289

KIT,REPAIR,HOSE/SPRING TOF55

KIT INCLUDES: HOSE, FOLLOWER, 1 in. [QTY. 2], CLAMP, TIRE [QTY. 1]

GG 253545

KIT,REPAIR,THROAT SEAL,HOTMLT

KIT INCLUDES: NUT, PACKING [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SEAL, BACK-UP [QTY. 1], PACKING, O-RING [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], WASHER, SCRAPER, GREASE ZONE [QTY. 1], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1]

GG 253483

SEAT, VALVE

Graco 253483 Intake Valve Seat with Pressure Relief Valve, Carbide Seat

GG 253597

PUMP, DISP, RECIP MAX WPR 1000PS

Graco 253597 Dura-Flo 1000 cc Lower, Carbon Steel, UHMWPE/Leather Packings

GG 253626

KIT, DIAPHRAGM, PTFE-EPDM, 1040

Graco 253626 PTFE/EPDM Overmold Diaphragm Kit for 1-inch Pump

GG 253628

GG 253692

FRAME, ACCY, STAND, PUMP

Graco 253692 Floor Stand for NXT, E-Flo DC and Viscount Motors (750-2000 cc)

GG 253741

HOUSING,VALVE,SEAT

GG 253742

HOUSING,VALVE, SEAT

GG 253743

HOUSING, VALVE, SEAT, ASSY

GG 253744

KIT, REPAIR, PACKING

Graco 253744 UHMWPE and Leather Packings Repair Kit, for Dura-Flo 1800 (standard for 249992, L430SM, L430CM)

KIT INCLUDES: GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], PACKING, VEE, UHMWPE, SUBMICRON [QTY. 2], GLAND, PACKING, MALE [QTY. 1], PACKING, VEE, LEATHER [QTY. 4 ], PACKING, O-RING [QTY. 1], SEAL, ACETAL [QTY. 2], PACKING, O-RING [QTY. 1]

GG 253745

KIT, REPAIR, PACKINGS

Graco 253745 UHMWPE and Leather Packings Repair Kit, for Dura-Flo 2400 (standard for 249991, L580SM)

KIT INCLUDES: PACKING, VEE [QTY. 3], GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE, UHMWPE, [QTY. 2], PACKING, VEE, LEATHER [QTY. 4 ], PACKING, O-RING [QTY. 1], SEAL, ACETAL [QTY. 2], PACKING, O-RING [QTY. 1]

GG 255057

GG 255058

GG 255060

KIT, DIAPHRAGM-F2 PT

Graco 255060 PTFE Diaphragm Kit for 1.5-inch Pump

GG 255061

KIT, REPAIR, AIR VALVE, SST

Graco 255061 Air Valve Repair Kit

GG 255082

GG 255122

GG 255143

KIT, BRACKET, MOUNTING

Graco 255143 NXT Wall Mounting Kit

GG 255148

GG 255149

GG 255150

GG 255160

KIT, REPAIR,SEAT/NEEDLE

Graco 255160 Needle/ Seat Repair Kit for G40 Air Assisted Spray Gun

GG 255179

MD2 VALVE,DISPENSE,1:1,SOFT SEATS

Graco 255179 1:1 Ratio Soft Seat MD2 Valve

Accurately dispenses and mixes two-component sealants and adhesives.

• Minimizes maintenance time and costs while maximizing dispense time
• Designed with fewer parts and is easy to clean
• Streamlines maintenance and service Complete modular design adapts to different installation needs
• No unique tools required

• Model: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

• Compatible Material: Sealants, Adhesives

GG 255180

MD2 VALVE,DISPENSE,1:1 HARD SEATS

Graco 255180 1:1 Ratio Hard Seat MD2 Valve

Accurately dispenses and mixes two-component sealants and adhesives.

• Minimizes maintenance time and costs while maximizing dispense time
• Designed with fewer parts and is easy to clean
• Streamlines maintenance and service Complete modular design adapts to different installation needs
• No unique tools required

• Model: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

GG 255181

MD2 VALVE,DISPENSE,10:1,SOFT SEATS

Graco 255181 10:1 Ratio Soft Seat MD2 Valve

Accurately dispenses and mixes two-component sealants and adhesives.

• Minimizes maintenance time and costs while maximizing dispense time
• Designed with fewer parts and is easy to clean
• Streamlines maintenance and service Complete modular design adapts to different installation needs
• No unique tools required

• Model: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

GG 255182

MD2 VALVE,DISPENSE,10:1 HARD SEATS

Graco 255182 10:1 Ratio Hard Seat MD2 Valve

Accurately dispenses and mixes two-component sealants and adhesives.

• Minimizes maintenance time and costs while maximizing dispense time
• Designed with fewer parts and is easy to clean
• Streamlines maintenance and service Complete modular design adapts to different installation needs
• No unique tools required

• Model: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

GG 255194

GG 255197

GG 255204

KIT, REPAIR, PUMP

Graco 255204 210ES Pump Repair Kit

All packings should be replaced at one time to keep wear even. For use with Graco models 190ES, 210ES or other Graco 200 series sprayers. Kit includes all components to replace the packing set for the pump

• All packings should be replaced at one time to keep wear even
• For use with Graco models 190ES, 210ES or other Graco 200 series sprayers
• Keep a spare kit on hand to minimize sprayer downtime

• For Use With: Pro190ES Cart, Pro190ES Stand, Pro210ES Cart, Pro210ES Stand, Pro230ES Stand, Pro230ES Cart, Pro270ES Stand, Pro270ES Cart, Pro270GS

GG 255206

HANDLE, VALVE, AIR

GG 255208

HANDLE, 2K DISP. VALVE, ELEC.

Graco 255208 MD2 Valve Electric Switch Handle

Convert any MD2 valve to a hand held valve with an internal normally open switch

GG 255216

GG 255217

KIT, SEAL,CYLINDER,AIR,VALVE

KIT INCLUDES: PACKING, O-RING [QTY. 3], PACKING, O-RING [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 2], BEARING, SLEEVE 1/4, 3/8, 1/4NYL [QTY. 2], LUBRICANT, GREASE [QTY. 1]

GG 255218

KIT, SEAL,LUBE,VALVE

KIT INCLUDES: PACKING, O-RING [QTY. 2], O-RING, [QTY. 2], SEAL, POSIPAK [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 2], SHAFT, PRIMARY [QTY. 2], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 2]

GG 255219

KIT, SEAL,NOSE,GLC,VALVE

KIT INCLUDES: O-RING, [QTY. 2], SEAL, POSIPAK [QTY. 2], NEEDLE, SNUFFBACK [QTY. 2], SEAT, NEEDLE [QTY. 2]

GG 255220

KIT, SEAL,NOSE,UL2K

KIT INCLUDES: O-RING, [QTY. 2], GASKET, SEAT [QTY. 2], SEAT, VALVE [QTY. 2], INSERT, SUFF-BACK, 2K2 [QTY. 2], NEEDLE, 2K2 SST HARDENED [QTY. 2]

GG 255244

GG 255247

ADAPTER,1:1 RATIO CHECK

Graco 255247 1:1 Ratio Check MD2 Adapter

Use this adapter to independently dispense the A and B materials in order to perform a ratio check

• Model: MD2

GG 255249

LEVER, 2K DISPENSE VALVE

Graco 255249 2K Dispense Valve Lever

• Model: PR70

• For Use With: MD2 Valve Handle

• Product Type: Actuated Lever

GG 255277

LDP5 VALVE, METERED, FLEX EXT

Graco 255277 LDP5 Electronic Preset Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - Trigger Guard and Swivel Cover Not Included - NPT

Gracos LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).

• Easy to read LCD screen keeps dispenses precise.
• Inlet 1/2 in. NPT with swivel.
• Rugged meter body is impact resistant for long life.
• Preset meter automatically shuts-off flow when preset quantity has been dispensed.
• 5 year warranty. See manufacturers website for details.

• Model: LDP5

• Approvals: CE

• Compatible Material: Oil, Antifreeze

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Storage Temperature ( degree C): 49
• Maximum Storage Temperature ( degree F): 120

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (MPa): 6.9
• Maximum Working Pressure (psi): 1000
• Meter Accuracy (%): plus/minus 00.5
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.36
• Metering Gun Weight (lb): 3

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Nozzle Type: Automatic

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Type: NPT

• Overall Height (cm): 8.3
• Overall Height (in): 3.25
• Overall Height (mm): 83
• Overall Length (cm): 28
• Overall Length (in): 11
• Overall Length (mm): 280
• Overall Width (cm): 8.3
• Overall Width (in): 3.25
• Overall Width (mm): 83

• Recommended Environment: Indoor

GG 255280

GG 255285

GG 255281

GG 255308

GG 255305

GG 255513

KIT,COMPLETE SEAL, L250CS

KIT INCLUDES: PACKING, VEE [QTY. 3], PACKING, VEE [QTY. 2], PACKING, O-RING [QTY. 2], PACKING, UHMWPE, CM1000 [QTY. 2], GLAND, MALE CM1000 FOOT VALVE [QTY. 1], GLAND, FEMALE CM1000 FOOT VALVE [QTY. 1], BEARING, PISTON GUIDE CM250 [QTY. 1], PACKING, PTFE 250 [QTY. 2], PACKING, O-RING [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], GLAND, PACKING MALE [QTY. 1], SEAL, PISTON [QTY. 1], WIPER [QTY. 1], SEAL, (8, 10 CM) [QTY. 1]

GG 255470

GG 255477

GG 255510

KIT, COMPLETE SEAL, L200CM

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, VEE [QTY. 2], PACKING, O-RING [QTY. 2], PACKING, U-CUP, CM200 [QTY. 1], SEAL, CM200 WETCUP COVER [QTY. 1], WIPER, CM200 WETCUP COVER [QTY. 1], SPACER, U-CUP, CM200 - CM250 [QTY. 1], BEARING, PISTON GUIDE CM200 [QTY. 1], PACKING, O-RING [QTY. 1], GLAND, PACKING FEMALE [QTY. 1], GLAND, PACKING MALE [QTY. 1], PACKING, VEE [QTY. 2], SEAL, PISTON [QTY. 1], SEAL, (8, 10 CM) [QTY. 1], SEAL, VALVE [QTY. 1], SPACER, U-CUP BEARING, CM200 [QTY. 1]

GG 255511

GG 255517

KIT,COMPLETE SEAL, L500CS

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 1], PACKING, VEE [QTY. 2], PACKING, VEE [QTY. 3], PACKING, VEE [QTY. 2], PACKING, VEE, PTFE [QTY. 2], BEARING, PISTON GUIDE CM500 [QTY. 1], SEAL, ACETAL [QTY. 3], GLAND, PACKING FEMALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], GLAND, PACKINGMALE [QTY. 1], GLAND, PACKING, MALE [QTY. 1], SEAL, PISTON [QTY. 1], SEAL, VALVE [QTY. 1]

GG 255461

GG 255446

MD2 VALVE, ASSY, 10:1, HS, GUN, ELEC

Graco 255446 10:1 Wide Ratio, Hard Seat, Electric Actuated, Non-adjustable Snuff-back, Manual Handle

Manual gun option for mixing dispense (MD) valve for 2 component materials supports minimizing maintenance while maximizing production.

• Wide ratio valve with center injection tip works well when the low volume material has a much lower viscosity than the high volume material. Frequent cleaning intervals may be required to maintain the tip.
• Carbide hard seats and hardened needles are good for abrasive material and stall against pressure applications.
• Hand held valve with electric switch signals the controller to open and close the ports on the MD2 valve. The process uses a remote four-way air control (not included, must be ordered separately).
• Snuff-back control prevents dripping as it brings material back into the valve until next dispense.
• Hand held electric handle eases manual dispense.

• Model: Two Component Mixing Dispense Valve
• Series: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

• Compatible Material: 2K Sealants, Adhesives

• Component Type: Plural-Component

• Fluid Inlet Size (in): 9/16-18
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: UNF

• Fluid Outlet Size (in): 7/8-9
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: UNC

• Gun Activation: Manual

• Includes: 2K Dispense Handle, 10:1 Hard Seat Dispense Valve, 10:1 Ratio Check Kit, 10:1 Night Cap, ASM Aid Tool
• Inlet Size (in): 9/16-18

• Maximum Viscosity (cP): 1000000

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

• Mount Hole Thread Gender: Female
• Mount Hole Thread Type: Metric

GG 255328

GG 255508

KIT, CMPL. SEAL, L100CM

Graco 255508 100 cc Check-Mate Carbon Steel MaxLife Displacement Pump Complete Seal Kit

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, U-CUP, CM100 [QTY. 1], SPACER, U-CUP, CM100 [QTY. 1], PACKING, O-RING, PTFE [QTY. 2], PACKING, O-RING, PTFE [QTY. 1], PACKING, LEATHER, CM100 [QTY. 2], PACKING, UHMWPE, CM450 [QTY. 2], SEAL, CM100 WETCUP COVER [QTY. 1], WIPER, CM100 WETCUP COVER [QTY. 1], GLAND, MALE CM450 FOOT VALVE [QTY. 1], GLAND, FEMALE CM450 FOOT VALVE [QTY. 1], BEARING, PISTON GUIDE CM100 [QTY. 1], SEAL, PISTON (4.5 CM) [QTY. 1], SEAL, VALVE [QTY. 1], SEAL, [QTY. 1], PACKING, O-RING, #233 [QTY. 1], SPACER, U-CUP BEARING, CM100 [QTY. 1], RING, RETAINING [QTY. 1]

GG 255442

MD2 VALVE,ASSY,1:1,HS,GUN,AIR

Graco 255442 1:1 Ratio Hard Seat Air-Actuated Gun Trigger

Accurately dispenses and mixes two-component sealants and adhesives.

• Model: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

GG 255530