Airpower | GRACO INC. S10595 branded products

Kit, Cartridge, Fusion Pc, 3 Pk

GG 19Y301

KIT, CARTRIDGE, FUSION PC, 3 PK

Fusion ProConnect Cartridge - 3 PackCombined with a Fusion PC gun or Fusion AP gun outfitted with the ProConnect Retrofit Kit, the Fusion PC cartridge delivers you a perfect rebuild in seconds. This all-in-one cartridge head replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.A single cartridge replaces the entire fluid section including o-ringsSprays exactly like a Fusion APIntegrated check valves for cross-over containment13 parts are replaced by a single ProConnect cartridgeEliminates the need to purchase fluid section o-ringsSpare ProConnect cartridges can replace your back-up guns

$668.00

Kit, Cartridge, Fusion Pc, 1 Pk

GG 19Y300

KIT, CARTRIDGE, FUSION PC, 1 PK

Fusion ProConnect Cartridge - 1 PackCombined with a Fusion PC gun or Fusion AP gun outfitted with the ProConnect Retrofit Kit, the Fusion PC cartridge delivers you a perfect rebuild in seconds. This all-in-one cartridge head replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.A single cartridge replaces the entire fluid section including o-ringsSprays exactly like a Fusion APIntegrated check valves for cross-over containment13 parts are replaced by a single ProConnect cartridgeEliminates the need to purchase fluid section o-ringsSpare ProConnect cartridges can replace your back-up guns

$235.50

Kit, Front Ring, Fusion Pc

GG 19Y302

Kit, Front Ring, Fusion Pc

$218.00

Kit, Fluid Head, Fusion Pc

GG 19Y303

Kit, Fluid Head, Fusion Pc

$556.00

Kit, Cartridge, Fusion Pc, 5 Pk

GG 19Y308

KIT, CARTRIDGE, FUSION PC, 5 PK

Fusion ProConnect Cartridge - 5 PackCombined with a Fusion PC gun or Fusion AP gun outfitted with the ProConnect Retrofit Kit, the Fusion PC cartridge delivers you a perfect rebuild in seconds. This all-in-one cartridge head replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.A single cartridge replaces the entire fluid section including o-ringsSprays exactly like a Fusion APIntegrated A/B check valves all but eliminate the possibility of cross-over13 parts are replaced by a single ProConnect cartridgeEliminates the need to purchase fluid section o-ringsSpare ProConnect cartridges can replace your back-up guns

$981.00

Contractor Pc Compact Gun, Ltx, Pkgd

GG 19Y349

CONTRACTOR PC COMPACT GUN, LTX, PKGD

Contractor PC Compact Airless Spray Gun with RAC X 517 SwitchTipThe Contractor PC Compact airless spray gun provides all-day comfort and control, fast on-the-job gun rebuild capability and industry-proven Graco durability. Spray longer with 25% lighter weight and 25% smaller size than the Contractor gun with a 50% lighter trigger pull force.Compact design delivers maximum flexiblity for every application. The RAC X 517 SwitchTip provides a 10 inch spray pattern that is ideal for larger surfaces such as houses/buildings, walls and ceilings.Finish Jobs Faster with Less Fatigue

Delivers the most comfortable and lightest-weight spray experience ever
Lightest trigger pull force at all spray pressures
Lightest trigger hold force at all spray pressures

Exclusive ProConnect Replacement Cartridge

1-part, on-the-job gun rebuild
Needle and all wear parts in one simple part
Simply replace cartridge â€” it's like getting a brand new gun

Easy one-finger, ambidextrous trigger lockComfortable, contoured compact handle designEasyGlide Swivel for effortless hose management

$575.00

Cable, Is, Ipk Reed Sw

GG 19Y480

Cable, Is, Ipk Reed Sw

$157.00

Kit, Ipk Air Control

GG 19Y482

Kit, Ipk Air Control

$3,310.00

Kit, Pneumatic Ipk Module

GG 19Y486

Kit, Pneumatic Ipk Module

$4,090.00

Washer, Seal, Back Up

GG 19Y496

Washer, Seal, Back Up

$81.25

Washer Scraper 1.476x2.15

GG 19Y497

Washer Scraper 1.476x2.15

$102.50

Kit, 50' Cable, Ferrite

GG 19Y499

Kit, 50' Cable, Ferrite

$813.00

Radial Piston Air Motor, Muffler Ki, Set of 3

GG 19Y509

KIT, MUFFLER, RADIAL PISTON AIR

Radial Piston Air Motor Muffler kit, set of 3

$33.00

Kit, Retro, 5-10 Ga Pail, Rp Mtr

GG 19Y592

KIT, RETRO, 5-10 GA PAIL, RP MTR

Radial Piston Air Motor Retrofit Kit for 5 gallon (18 L) or 10 gallon (38 L) pail agitators. Pail cover, agitator shaft and blade not included.This kit makes it easy to replace an existing rotary vane motor on a 5 gallon (18 liter) or 10 gallon (38 L) pail agitator with a radial piston air motor.For wood (top coat, primer) and general finishing applicationsRadial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.Air line lubrication not requiredEasy to maintain and serviceSound pressure level at 70 psig (maximum recommended speed): Less than 75 dBAPail cover, agitator shaft and blade sold separately

$1,645.00

Pump, St10, Mpm/Nr/Ss/A1/A1/0/

GG 19Z001

SOLOTECH ST10 PUMP, I10-MPM-NR-SS-A1-A1-0

SoloTechâ„¢ i10 Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & BLDC Motor

Gracoâ€™s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$8,490.00

Solotech I10 Low Speed Hypalon Peristaltic Hose Pump With CSM Hose, Hastellloy-C Barb, AC Motor

GG 19Z012

SOLOTECH ST10 PUMP, I10-LAC-CS-HS-A1-A1-0

SoloTechâ„¢ i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & AC Motor

Gracoâ€™s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$7,940.00

SoloTech Peristaltic Hose Pump

GG 19Z003

SOLOTECH ST10 PUMP, I10-MPM-CS-PV-A1-A1-0

Graco 19Z003 SoloTech i10 Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & BLDC Motor

Graco's SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

More flow per revolution than conventional designs
Inexpensive to maintain - no valves, seals or glands
Pumps are reversible and can be used to empty lines or clear blockages

Model: SoloTech
Series: i10

Application: Industrial

Barb Material: PVDF

Flow Rate (GPM): 0.67

Gear Ratio: 37.66:1

Hose Diameter (cm): 1
Hose Diameter (in): 0.4
Hose Diameter (mm): 10
Hose Material: CSM

Housing Material: Powder Coated Aluminum
Inlet Size (cm): 0.95
Inlet Size (in): 3/8
Inlet Size (mm): 9.5

Inlet Thread Type: Flange

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.5

Maximum Fluid Pressure (bar): 9
Maximum Fluid Pressure (kPa): 900
Maximum Fluid Pressure (psi): 125

Maximum Storage Temperature ( degree C): 40
Maximum Storage Temperature ( degree F): 104

Minimum Flow Rate (GPM): 0.017

Minimum Storage Temperature ( degree C): -10
Minimum Storage Temperature ( degree F): 14

Motor Type: Brushless DC

Outlet Size (cm): 9
Outlet Size (in): 3.54
Outlet Size (mm): 90

Overall Height (cm): 53
Overall Height (in): 21
Overall Height (mm): 533
Overall Length (cm): 41
Overall Length (in): 16.3
Overall Length (mm): 414
Overall Width (cm): 33
Overall Width (in): 13
Overall Width (mm): 330

Power Rating (HP): 120
Power Rating (kW): 89.48
Power Rating (W): 89484

Pump Speed (RPM): 2-93

$8,870.00

Solotech 123 EPDM Peristaltic Hose Pump With EPDM Hose, 316 Stainless Steel Barb & BLDC Motor

GG 19Z036

SOLOTECH ST23 PUMP, I23-MPM-EP-SS-A1-A1-0

SoloTechâ„¢ i23 EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & BLDC Motor

Gracoâ€™s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$9,640.00

Solotech 123 EPDM Peristaltic Hose Pump With EPDM Hose, PVDF Barb & BLDC Motor

GG 19Z037

SOLOTECH ST23 PUMP, I23-MPM-EP-PV-A1-A1-0

SoloTechâ„¢ i23 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC Motor

Gracoâ€™s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$9,930.00

Solotech 123 EPDM Peristaltic Hose Pump With EPDM Hose, 316 Stainless Steel Barb & BLDC Motor

GG 19Z059

SOLOTECH ST23 PUMP, I23-HAC-EP-SS-A1-A1-0

SoloTechâ„¢ i23 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC Motor

Gracoâ€™s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$8,110.00

Solotech 26 High Speed, EPDM Peristalic Hose Pump w/EPDM Hose

GG 19Z079

SOLOTECH ST26 PUMP, I26-HAC-EP-PV-A1-A1-0

SoloTechâ„¢ i26 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb

Gracoâ€™s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$11,880.00

Solotech 26 High Speed, Buna-N Peristalic Hose Pump w/Nitrile Hose

GG 19Z076

SOLOTECH ST26 PUMP, I26-HAC-BN-SS-A1-A1-0

SoloTechâ„¢ i26 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & AC Motor

Gracoâ€™s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$11,560.00

Pump, ST30, HAC, NR, SS

GG 19Z113

SOLOTECH ST30 PUMP, HAC/NR/SS/A1/A1/0/

SoloTechâ„¢ i30 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & AC Motor

Gracoâ€™s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Pump Construction

Cast aluminum housing reduces pump weight
Improved mounting flexibility with adjustable feet

Electric Motor

Choose between AC and Brushless DC models
Multiple gearbox offerings to meet your exact flow rate needs
Hazardous location motors available

Brushless DC Motor

Batch dispense mode
Wider turndown ratio allows for larger flow range
Maintenance reminders

Single Roller Design

Single roller design improves hose life by reducing the number of compressions, temperature and friction
Metallic roller with bearings provides constant compression and flow

Removable Cover

Aluminum covers with larger sight window makes it easy to access and see internal parts
Optional leak detector kit mounts on cover

Hose Barb Assembly

Easy to install or remove â€“ no special tools needed
Available with PVDF and SST barbs options
Floating flange for easy installation

More flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$14,270.00

Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old

GG 2000187

Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old

$1,640.00

Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old

GG 2000188

Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old

$1,905.00

Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200

GG 2000189

Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200

$2,520.00

SoloTech i23 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber, 316 Stainless Steel Barb & AC Motor

GG 19Z049

SOLOTECH ST23 PUMP, I23-MAC-NR-SS-A1-A1-0

SoloTechâ„¢ i23 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber, 316 Stainless Steel Barb & AC Motor

Gracoâ€™s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and TransferMore flow per revolution than conventional designsInexpensive to maintain - no valves, seals or glandsPumps are reversible and can be used to empty lines or clear blockagesExtended hose life - only one hose compression per revolution

$8,110.00

Therm-O-Flow Kit, Wiper, Seal, Green, Black, 200

GG 2000190

Therm-O-Flow Kit, Wiper, Seal, Green, Black, 200

$1,640.00

Pump, ST30, HAC/CS/PV/A1/A1/0

GG 19Z117

SOLOTECH ST30 PUMP, HAC/CS/PV/A1/A1/0/

Graco 19Z117 SoloTech i30 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco's SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Pump Construction
- Electric Motor
  - Brushless DC Motor
    - Removable Cover
      - Hose Barb Assembly
        Easy to install or remove - no special tools needed
        Available with PVDF and SST barbs options
        Floating flange for easy installation
        More flow per revolution than conventional designs
        Inexpensive to maintain - no valves, seals or glands
        Pumps are reversible and can be used to empty lines or clear blockages
        Extended hose life - only one hose compression per revolution
        
        Model: SoloTech
        Series: i30
        Application: Industrial
        Barb Material: PVDF
        Flow Rate (GPM): 16
        Gear Ratio: 19.5:1
        Hose Diameter (cm): 3
        Hose Diameter (in): 1.2
        Hose Diameter (mm): 30
        Hose Material: CSM
        Housing Material: Powder Coated Aluminum
        Inlet Size (cm): 3.2
        Inlet Size (in): 1-1/4
        Inlet Size (mm): 32
        Inlet Thread Type: Flange
        Maximum Flow Rate (GPM): 15.8
        Maximum Flow Rate (L/min): 59.8
        Maximum Fluid Pressure (bar): 9
        Maximum Fluid Pressure (kPa): 900
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 9
        Maximum Fluid Pressure (kPa): 900
        Maximum Fluid Pressure (psi): 125
        Maximum Storage Temperature ( degree C): 40
        Maximum Storage Temperature ( degree F): 104
        Minimum Flow Rate (GPM): 2.675
        Minimum Storage Temperature ( degree C): -10
        Minimum Storage Temperature ( degree F): 14
        Motor Type: High Speed AC
        Outlet Size (cm): 12.5
        Outlet Size (in): 4.92
        Outlet Size (mm): 125
        Overall Height (cm): 77
        Overall Height (in): 30.3
        Overall Height (mm): 770
        Overall Length (cm): 67
        Overall Length (in): 26.5
        Overall Length (mm): 673
        Overall Width (cm): 59
        Overall Width (in): 23.3
        Overall Width (mm): 592
        Power Rating (HP): 3
        Power Rating (kW): 2.24
        Power Rating (W): 2237
        Pump Speed (RPM): 15-91

$15,110.00

Stellair Auto Manifold, Rear Fluid Inlet, W/ Inch Threads

GG 2000230

MANIFOLD, STELLAIR, REAR INLET, INCH

Stellair Auto Manifold, Rear Fluid Inlet, with Inch ThreadsRear fluid inlet manifold connects a Stellair Auto air spray gun to an automated finishing systemâ€™s robot, reciprocator, or flat line machine.Manifold sets automatic air spray gun in place to produce stellar results for industrial finishing of automotive components, industrial metal and plastic parts, wood products and architectural structures.Stellair Auto manifold has the same tool center point as legacy AirPro Auto air spray guns, making it easy to upgrade paint line and spray booth equipment.Rear port fluid inlet manifold effectively positions a Stellair Auto air spray gun on a robot or in a compact space.Durable and lightweight construction reduces equipment wear, especially on high speed production lines.Two-screw, gun-to-manifold connection simplifies automatic air spray gun removal and maintenance.Fan adjustment valve fine-tunes spray pattern widths according to the size and geometry of the parts being coated.

$589.00

Stellair Auto Manifold, Side Fluid Inlet, with Inch Threads and Fan Adjustment Valve

GG 2000226

MANIFOLD, STELLAIR, ADJ, SIDE INLET, INCH

Stellair Auto Manifold, Side Fluid Inlet, with Inch Threads and Fan Adjustment ValveSide fluid inlet manifold connects a Stellair Auto air spray gun to an automated finishing systemâ€™s robot, reciprocator, or flat line machine.Manifold sets automatic air spray gun in place to produce stellar results for industrial finishing of automotive components, industrial metal and plastic parts, wood products and architectural structures.Stellair Auto manifold has the same tool center point as legacy AirPro Auto air spray guns, making it easy to upgrade paint line and spray booth equipment.Durable and lightweight construction reduces equipment wear, especially on high speed production lines.Two-screw, gun-to-manifold connection simplifies automatic air spray gun removal and maintenance.

$353.00

Kit, Air Cap, HVLP, General Industry

GG 2000291

KIT, AIR CAP, HVLP, GENERAL INDUSTRY

$147.50

KIT, FLUID CARTRIDGE, .055

GG 2000503

KIT, FLUID CARTRIDGE, .055

$129.50

Stellair Auto Gun Alignment Tool

GG 2000481

KIT, ALIGNMENT TOOL

Graco 2000481 Stellair Automatic Gun Alignment Tool

Spray pattern alignment and pathing tool helps ensure the accuracy and repeatability needed to keep production moving on automated finishing systems with robots, reciprocators, or flat line machines. It is easily attached and detached from a Stellair Auto air spray gun.

Application: Patented automatic air spray gun accessory produces stellar results for industrial finishing applications, such as automotive, industrial metal and plastic components, wood products and architectural structures.

Gauge helps paint line operators and service technicians quickly set the angle of the air cap, so that it matches the part being sprayed, reducing overspray and material waste.
Path guide shows operators and robot programmers the spray center point and the distance between the gun and the workpiece. This prevents uneven coverage and runs, especially when used for robot pathing.

$70.75

Kit, Fluid Control Knob, Assembly

GG 2000516

Kit, Fluid Control Knob, Assembly

$141.50

Kit, Fluid Cartridge, .042

GG 2000502

KIT, AIR CAP, HVLP, GENERAL INDUSTRY

$129.50

PSM EtherNet/IP Communication Gateway Module

GG 2000362

KIT, MODBUS-ETHERNET IP, PSM, PCB

PSM Modbus PCB EtherNet/IP ModuleThe Precision Shot Meter (PSM) is a high-accuracy, single-component dispensing system designed for precise and repeatable dispensing of a wide range of materials. Available in multiple sizes to meet the needs of your specific application, from the smallest detail work to the largest jobs, the PSM system delivers shot accuracy of +/-1%. Gracoâ€™s PSM line offers greater accuracy, less downtime and easier maintenance, facilitating greater productivity and ultimately bottom-line results.The PSM, one component precision shot meter offers the same repeatable accuracy that automotive, electronics, and telecommunications manufacturers need.Ambient and warm melt availability and shot size ranging from 0.1cc to 200cc covers industrial materials and chemistries like Epoxy, TIMS, Sulfide, Silicone, Polyurethane, and more.Lightweight and compact design is ideal for robot and motion table mounting.Easy PLC integration with options for I/O, Profinet or EtherNet/IP.First-in-first-out fluid path eliminates dead zones and downtime due to clogged valves.Servo motor controlling dispense along with a high precision meter ensures +/- 1% shot repeatability. The materials go where you need them to go. Every time.

$3,150.00

Kit, Mixer, Bell Mount, 1/4 X 24 EL, 50PK

GG 2001992

Kit, Mixer, Bell Mount, 1/4 X 24 EL, 50PK

$430.00

Kit, Mixer, Bell Mount, 3/8 X 40 EL, 1000 PK

GG 2002005

KIT,MIXER, BELL MOUNT, 3/8 X 40 EL, 1000 PK

$12,370.00

Kit, Mixer, Bell Mount, 1/2 X 24 EL, 50PK

GG 2002011

Kit, Mixer, Bell Mount, 1/2 X 24 EL, 50PK

$572.00

Kit, Mixer, Bell Mount, 3/8 x 40 El, 50 Pk

GG 2002004

Kit, Mixer, Bell Mount, 3/8 x 40 El, 50 Pk

$1,015.00

Kit, Mixer, Bell Mount, 1/2 x 36 El, 50 Pk

GG 2002012

Kit, Mixer, Bell Mount, 1/2 x 36 El, 50 Pk

$773.00

Kit, Mixer, Bell Mount, 1/4 X 24 EL, 1000PK

GG 2001993

Kit, Mixer, Bell Mount, 1/4 X 24 EL, 1000PK

$3,980.00

Kit, Mixer, Bell Mount, 1/2 X 36 EL, w/Washer, 50 PK

GG 2002015

Kit, Mixer, Bell Mount, 1/2 X 36 EL, w/Washer, 50 PK

$837.00

Cord, Cid1 Barrier Type W Gland 3 Wire

GG 2001046

CORD, CID1 BARRIER TYPE W GLAND 3 WIRE

Power Cord for Hazardous Location F-6 Motor 1-inch Industrial QUANTM Pumps

$165.50

Stellair Air Spray Gun, Conventional, 0.030 In. (0.8 MM), Peek Tip, General Industry

GG 2004146

STELLAIR GUN, CONV (.030)

Stellair Air Spray Gun, Conventional, 0.030 in (0.8 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether youâ€™re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

Mixer, Assembly, Bell Mount, 3/8X24El, 50 Pk

GG 2001999

Mixer, Assembly, Bell Mount, 3/8X24El, 50 Pk

$500.00

Stellair Air Spray Gun, Conventional, 0.040 In. (1.0 MM), Peek Tip, General Industry

GG 2004147

STELLAIR GUN, CONV (.042)

Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether youâ€™re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painterâ€™s hand.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

Stellair Air Spray Gun, Conventional, 0.086 In. (2.2 MM), PEEK Tip, General Industry

GG 2004149

STELLAIR GUN, CONV (.086)

Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether youâ€™re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Swivel and hose move with you at any angle, preventing tripping and injury.

Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

Stellair Air Spray Gun, HVLP, 0.042 In. (1.1 MM), Peek Tip, General Industry

GG 2004151

STELLAIR GUN, HVLP (.042)

Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether youâ€™re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Swivel and hose move with you at any angle, preventing tripping and injury.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$630.00

Stellair Air Spray Gun, HVLP, 0.070 In. (1.8 MM), Peek Tip, General Industry

GG 2004153

STELLAIR GUN, HVLP (.070)

Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, PEEK Tip