GRACO INC. S10595
GRACO INC. S10595 branded products
Valve, Asset, 1/2 NPT, Rigid, Oil, Hf
GG 26D780
GG 26D780
Valve, Asset, 1/2 Npt, Rigid, Oil, Hf $2,320.00
Valve, Asset, 1/2 NPT, Flex, Oil, Hf
GG 26D781
GG 26D781
Valve, Asset, 1/2 Npt, Flex, Oil, Hf $2,320.00
VALVE, ASSET, 1/2 NPT, WWS
GG 26D783
GG 26D783
VALVE, ASSET, 1/2 NPT, WWS
Pulse® Metered Dispense Valve for Windshield Wash Applications - 1/2 in NPT inlet swivel, Rigid Open ExtensionGraco dispense meters designed for our Pulse® Asset fluid management system are durable and easy to use. Everything you need is at your fingertips. Intuitive LCD display and D-pad allow for easy operation.
Track and record fluid refills in your assets with electronic metering and NFC tagging
Increase maintenance productivity
Reliable—time-tested Graco engineering
Large, Intuitive Display—high-contrast display for low and bright light conditions
Protective trigger guard—prevents accidental dispenses
Four finger trigger with lock-on feature
Long battery life—uses 4 AA easy-to-replace batteries
$2,320.00
VALVE, ASSET, 3/4 NPT, RIGID, OIL, HF
GG 26D784
GG 26D784
VALVE, ASSET, 3/4 NPT, RIGID, OIL, HF
Pulse® Metered Dispense Valve for Oil and Coolant Applications - 3/4 in NPT inlet swivel, Rigid Extension, High Flow NozzleGraco dispense meters designed for our Pulse® Asset fluid management system are durable and easy to use. Everything you need is at your fingertips. Intuitive LCD display and D-pad allow for easy operation.
Track and record fluid refills in your assets with electronic metering and NFC tagging
Increase maintenance productivity
Reliable—time-tested Graco engineering Large, Intuitive Display—high-contrast display for low and bright light conditionsProtective trigger guard—prevents accidental dispenses
Four finger trigger with lock-on feature
Long battery life—uses 4 AA easy-to-replace batteries
$2,320.00
Valve, Asset, 3/4 NPT, Flex, Oil, Hf
GG 26D785
GG 26D785
Valve, Asset, 3/4 Npt, Flex, Oil, Hf $2,320.00
SYSTEM, OEM, 1400CC
GG 26D809
GG 26D809
SYSTEM, OEM, 1400CC
RoadLazer HPS 180 w/ Dura-Flo XL 1400cc Severe-Duty The RoadLazer HPS are industry-leading pumping systems that provide true market-leading performance for the mostdemanding long-line striping applications. With an incredibly long 11.25 inch stroke, Xtreme Seal™ packings andSevere Duty pump coating, you are ensured longevity as well; or choose the MaxLife pump coating for even longer life. Higehst Production Rate- Stripe wider lines at faster speeds – getmore miles done in a day
- 13.5 gpm and 18.0 gpm options available
- Minimal pressure drop at change-over for perfect lines
- Incredibly long 11.25 inch stroke meansmore paint per stroke and longeroverall pump life
- Slim design will fit into any long-linetruck application
- Precision machined parts and ultra-fastchange-over is stall-free – eliminatingdown-time
- All connections are o-ringsealed − eliminating the possibilityof hydraulic fluid leaks
$26,610.00
SYSTEM, HPS 135 MAXLIFE
GG 26D813
GG 26D813
SYSTEM, HPS 135 MAXLIFE
RoadLazer HPS 135 w/ Dura-Flo XL 1000cc MaxLife The RoadLazer HPS are industry-leading pumping systems that provide true market-leading performance for the mostdemanding long-line striping applications. With an incredibly long 11.25 inch stroke, Xtreme Seal™ packings andSevere Duty pump coating, you are ensured longevity as well; or choose the MaxLife pump coating for even longer life. Higehst Production Rate- Stripe wider lines at faster speeds – getmore miles done in a day
- 13.5 gpm and 18.0 gpm options available
- Minimal pressure drop at change-over for perfect lines
- Incredibly long 11.25 inch stroke meansmore paint per stroke and longeroverall pump life
- Slim design will fit into any long-line truck application
- Precision machined parts and ultra-fastchange-over is stall-free – eliminatingdown-time
- All connections are o-ringsealed − eliminating the possibilityof hydraulic fluid leaks
$29,940.00
SYSTEM, OEM, 1400CC, MAXLIFE
GG 26D814
GG 26D814
SYSTEM, OEM, 1400CC, MAXLIFE
RoadLazer HPS 180 w/ Dura-Flo XL 1400cc MaxLife The RoadLazer HPS are industry-leading pumping systems that provide true market-leading performance for the most demanding long-line striping applications. With an incredibly long 11.25 inch stroke, Xtreme Seal™ packings and Severe Duty pump coating, you are ensured longevity as well; or choose the MaxLife pump coating for even longer life. Higehst Production Rate- Stripe wider lines at faster speeds – get more miles done in a day
- 13.5 gpm and 18.0 gpm options available
- Minimal pressure drop at change-over for perfect lines
- Incredibly long 11.25 inch stroke means more paint per stroke and longer overall pump life
- Slim design will fit into any long-line truck application
- Precision machined parts and ultra-fastchange-over is stall-free – eliminatingdown-time
- All connections are o-ringsealed − eliminating the possibilityof hydraulic fluid leaks
$33,260.00
DAMPENER, DTC-ALSSPSA1
GG 26D875
GG 26D875
DAMPENER, DTC-ALSSPSA1
1 in. (25.4 mm) i-Series Aluminum Pulsation Dampener with SS Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $1,330.00
DAMPENER, DTD-ALSSPSA1
GG 26D877
GG 26D877
DAMPENER, DTD-ALSSPSA1
1.5 in. (38.1 mm) i-Series Aluminum Pulsation Dampener with SS Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $1,815.00
DAMPENER, DTE-ALSSPSA1
GG 26D878
GG 26D878
DAMPENER, DTE-ALSSPSA1
2 in. (50.8 mm) i-Series Aluminum Pulsation Dampener with SS Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $2,150.00
DAMPENER, DTC-PPPPPSP1
GG 26D885
GG 26D885
DAMPENER, DTC-PPPPPSP1
1 in. (25.4 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $2,040.00
DAMPENER, DTD-PPPPPSP1
GG 26D886
GG 26D886
DAMPENER, DTD-PPPPPSP1
1.5 in. (38.1 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $2,330.00
DAMPENER, DTE-PPPPPSP1
GG 26D887
GG 26D887
DAMPENER, DTE-PPPPPSP1
2 in. (50.8 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped. Controlled pulsation for more consistent flow, while minimizing system vibration. Creating a safer work environment. Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system. Minimizes potential fluid shearing; improves product quality, reducing cost. $2,670.00
VALVE, TC, STANDARD
GG 26D918
GG 26D918
VALVE, TC, STANDARD
TC Valve, 1:1, Standard Twin Control (TC) valve independently controls A/B fluid paths for precise mixing and dispense of two component sealants and adhesives. Mixing dispense valve handles a range of plural component adhesives and sealants for industrial applications of epoxies, silicones, urethanes and thermal interface materials (TIMs). Independent control of A/B fluid path maximizes dispense accuracy and efficiency with minimal maintenance. Base purge conserves the amount of material used and prevents in-mixer curing, which reduces consumable use. Modular design adapts to different installation needs. No unique tools are required for maintenance or repair. $5,620.00
VALVE, TC, HIGH WEAR
GG 26D919
GG 26D919
VALVE, TC, HIGH WEAR
TC Valve, 1:1, High Wear Twin Control (TC) valve independently controls A/B fluid paths for precise mixing and dispense of two component sealants and adhesives. Mixing dispense valve handles a range of plural component adhesives and sealants for industrial applications of epoxies, silicones, urethanes and thermal interface materials (TIMs). High wear model withstands tough materials, extending equipment life. Base purge conserves the amount of material used and prevents in-mixer curing, which reduces consumable use. Modular design adapts to different installation needs. No unique tools are required for maintenance or repair. $5,930.00
VALVE, TC, 10:1 STANDARD
GG 26D920
GG 26D920
VALVE, TC, 10:1 STANDARD
TC Valve, 10:1, Standard Twin Control (TC) valve independently controls A/B fluid paths for precise mixing and dispense of two component sealants and adhesives. Mixing dispense valve handles a range of plural component adhesives and sealants for industrial applications of epoxies, silicones, urethanes and thermal interface materials (TIMs). Independent control of A/B fluid path maximizes dispense accuracy and efficiency with minimal maintenance. Base purge conserves the amount of material used and prevents in-mixer curing, which reduces consumable use. Modular design adapts to different installation needs. No unique tools are required for maintenance or repair. $5,620.00
Therm-O-Flow Kit, Mounting, Tie Bar, Nxt 70:1
GG 26D965
GG 26D965
Therm-O-Flow Kit, Mounting, Tie Bar, Nxt 70:1 $2,490.00
REACTOR 3 E-20 PROPORTIONER, STD, 7KW
GG 26R310
GG 26R310
REACTOR 3 E-20 PROPORTIONER, STD, 7KW
Reactor 3 E-20 Standard Tier Spray Foam Proportioner, 7 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-20 is a spray foam system build for contractors focused on smaller jobs or for contractors just entering the business, it is a great starter machine. Due to the smaller heaters the E-20 is also a good choice for contractors in tempered climates where larger heaters are not required. ISO Lube Pump- Active ISO Lube system with peristaltic pump
- Automatic timed circulation improves TSL Life
- Reduced maintenance (No check valves)
- New larger easy-to-change ISO lube bottle
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- New Reactor 3 exclusive: connect with Tier 4 engines for ADM engine diagnostic
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$28,120.00
REACTOR 3 E-20 PROPORTIONER, PRO, 7KW
GG 26R311
GG 26R311
REACTOR 3 E-20 PROPORTIONER, PRO, 7KW
Reactor 3 E-20 Pro Tier Spray Foam Proportioner, 7 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-20 is a spray foam system build for contractors focused on smaller jobs or for contractors just entering the business, it is a great starter machine. Due to the smaller heaters the E-20 is also a good choice for contractors in tempered climates where larger heaters are not required. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$30,260.00
REACTOR 3 E-20 PROPORTIONER, ELITE, 10KW
GG 26R312
GG 26R312
REACTOR 3 E-20 PROPORTIONER, ELITE, 10KW
Reactor 3 E-20 Elite Tier Spray Foam Proportioner, 10 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-20 is a spray foam system build for contractors focused on smaller jobs or for contractors just entering the business, it is a great starter machine. Due to the smaller heaters the E-20 is also a good choice for contractors in tempered climates where larger heaters are not required. Katalyst- Katalyst full system communication and control that improves performance, ratio and yield
- Requires Core E1 pumps
- Automatically shuts down when you run out of material
- Prevents air from entering the system that can cause off-ratio issues
- Requires Core E1 pumps
- Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials
- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$35,620.00
REACTOR 3 E-20 PROPORTIONER, PRO, 10KW
GG 26R313
GG 26R313
REACTOR 3 E-20 PROPORTIONER, PRO, 10KW
Reactor 3 E-20 Pro Tier Spray Foam Proportioner, 10 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-20 is a spray foam system build for contractors focused on smaller jobs or for contractors just entering the business, it is a great starter machine. Due to the smaller heaters the E-20 is also a good choice for contractors in tempered climates where larger heaters are not required. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$32,410.00
Reactor 3 E-Xp1 Proportioner, Std, 10Kw
GG 26R320
GG 26R320
REACTOR 3 E-XP1 PROPORTIONER, STD, 10KW
Graco 26R320 Reactor 3 E-XP1 Standard Tier Polyurea Proportioner, 10 kW
Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity.
Application: The E-XP1 is a polyurea system build for a customer focused on smaller jobs or for someone just entering the business, it is a great starter machine. Due to the smaller heaters the E-XP1 is also a good choice for contractors in tempered climates where larger heaters are not required.- ISO Lube Pump
- Active ISO Lube system with peristaltic pump
- Automatic timed circulation improves TSL Life
- Reduced maintenance (No check valves)
- New larger easy-to-change ISO lube bottle
- Touchscreen Advanced Display Module (ADM)
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Independent Hose Control
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Reduced Size
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
- Model: Reactor 3
- Series: E-XP1
- Product Series: Standard
- Amperage (A): 65A 1–ph, 39A 3–ph DELTA, 24A 3–ph WYE
- Frequency (Hz): 50/60
- Hose Heating Type: No Hose
- Hose Length (ft): 0
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.8
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Spray Pressure (MPa): 20.7
- Maximum Spray Pressure (psi): 3000
- Overall Depth (in): 15
- Overall Height (in): 56.5
- Overall Width (in): 24.9
- Power Rating (kW): 10
$29,990.00
REACTOR 3 E-XP1 PROPORTIONER, PRO, 10KW
GG 26R321
GG 26R321
REACTOR 3 E-XP1 PROPORTIONER, PRO, 10KW
Reactor 3 E-XP1 Pro Tier Polyurea Proportioner, 10 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-XP1 is a polyurea system build for a customer focused on smaller jobs or for someone just entering the business, it is a great starter machine. Due to the smaller heaters the E-XP1 is also a good choice for contractors in tempered climates where larger heaters are not required. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$32,140.00
Reactor 3 E-Xp1 Proportioner, Elite, 10Kw
GG 26R322
GG 26R322
REACTOR 3 E-XP1 PROPORTIONER, ELITE, 10KW
Graco 26R322 Reactor 3 E-XP1 Elite Tier Polyurea Proportioner, 10 kW
Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity.
Application: The E-XP1 is a polyurea system build for a customer focused on smaller jobs or for someone just entering the business, it is a great starter machine. Due to the smaller heaters the E-XP1 is also a good choice for contractors in tempered climates where larger heaters are not required.- Katalyst
- Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps
- Smart Suppl
- Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials
- Auto Pressure Balance
- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Cellular Software Updates
- Automatically stay up to date with the latest Reactor software
- Touchscreen Advanced Display Module (ADM)
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Independent Hose Control
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Advanced Electric Design
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced Size
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
- Model: Reactor 3
- Series: E-XP1
- Product Series: Elite
- Amperage (A): 65A 1–ph, 39A 3–ph DELTA, 24A 3–ph WYE
- Frequency (Hz): 50/60
- Hose Heating Type: No Hose
- Hose Length (ft): 0
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.8
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Spray Pressure (MPa): 20.7
- Maximum Spray Pressure (psi): 3000
- Overall Depth (in): 15
- Overall Height (in): 56.5
- Overall Width (in): 24.9
- Power Rating (kW): 10
$35,350.00
REACTOR 3 E-30 PROPORTIONER, PRO, 10KW
GG 26R331
GG 26R331
REACTOR 3 E-30 PROPORTIONER, PRO, 10KW
Reactor 3 E-30 Pro Tier Spray Foam Polyurea Proportioner, 10 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-30 is a spray foam system build for contractors looking for a machine with more output and capabilities. It is ideal for contractors focused on growing their business doing typical residential and commercial spray foam work. The E-30 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$39,350.00
REACTOR 3 E-30 PROPORTIONER, STD, 10KW
GG 26R330
GG 26R330
REACTOR 3 E-30 PROPORTIONER, STD, 10KW
Reactor 3 E-30 Standard Tier Spray Foam Proportioner, 10 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-30 is a spray foam system build for contractors looking for a machine with more output and capabilities. It is ideal for contractors focused on growing their business doing typical residential and commercial spray foam work. The E-30 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. ISO Lube Pump- Active ISO Lube system with peristaltic pump
- Automatic timed circulation improves TSL Life
- Reduced maintenance (No check valves)
- New larger easy-to-change ISO lube bottle
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- New Reactor 3 exclusive: connect with Tier 4 engines for ADM engine diagnostic
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$37,210.00
REACTOR 3 E-30 PROPORTIONER, ELITE, 15KW
GG 26R332
GG 26R332
REACTOR 3 E-30 PROPORTIONER, ELITE, 15KW
Reactor 3 E-30 Elite Tier Spray Foam Proportioner, 15 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-30 is a spray foam system build for contractors looking for a machine with more output and capabilities. It is ideal for contractors focused on growing their business doing typical residential and commercial spray foam work. The E-30 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. Katalyst- Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps
- Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials
- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$44,710.00
REACTOR 3 E-30 PROPORTIONER, PRO, 15KW
GG 26R333
GG 26R333
REACTOR 3 E-30 PROPORTIONER, PRO, 15KW
Reactor 3 E-30 Pro Tier Spray Foam Proportioner, 15 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-30 is a spray foam system build for contractors looking for a machine with more output and capabilities. It is ideal for contractors focused on growing their business doing typical residential and commercial spray foam work. The E-30 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$41,500.00
REACTOR 3 E-XP2 PROPORTIONER, STD, 15KW
GG 26R340
GG 26R340
REACTOR 3 E-XP2 PROPORTIONER, STD, 15KW
Reactor 3 E-XP2 Standard Tier Polyurea Proportioner, 15 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-XP2 is a polyurea system build for customers looking for a machine with more output and capabilities. It is ideal for use on medium to large jobs and applications. The E-XP2 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. ISO Lube Pump- Active ISO Lube system with peristaltic pump
- Automatic timed circulation improves TSL Life
- Reduced maintenance (No check valves)
- New larger easy-to-change ISO lube bottle
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- New Reactor 3 exclusive: connect with Tier 4 engines for ADM engine diagnostic
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$42,060.00
REACTOR 3 E-XP2 PROPORTIONER, PRO, 15KW
GG 26R341
GG 26R341
REACTOR 3 E-XP2 PROPORTIONER, PRO, 15KW
Reactor 3 E-XP2 Pro Tier Polyurea Proportioner, 15 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-XP2 is a polyurea system build for customers looking for a machine with more output and capabilities. It is ideal for use on medium to large jobs and applications. The E-XP2 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. Auto Pressure Balance- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$44,200.00
REACTOR 3 E-XP2 PROPORTIONER, ELITE, 15KW
GG 26R342
GG 26R342
REACTOR 3 E-XP2 PROPORTIONER, ELITE, 15KW
Reactor 3 E-XP2 Elite Tier Polyurea Proportioner, 15 kW Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator's job, optimize spray parameters and maximize productivity. The E-XP2 is a polyurea system build for customers looking for a machine with more output and capabilities. It is ideal for use on medium to large jobs and applications. The E-XP2 is an ideal machine that can be the workhorse of your fleet, capable of handling most types of jobs with a good mix of output, heat and features. Katalyst- Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps
- Automatically shuts down when you run out of material.
- Prevents air from entering the system that can cause off-ratio issues. * Requires Core E1 pumps
- Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials
- Automatically adjusts temperatures to optimize fluid pressures and maximize yield
- Select desired heater wattage for reduced power consumption
- Automatically stay up to date with the latest Reactor software
- Large new touchscreen interface
- Intuitive operation and navigation
- All spray operations from one screen
- Control A and B materials to different temperatures for improved pressure balancing
- Optimizes yield
- Brushless motor for improved pressure/flow performance
- New temperature control boards for independent hose heat
- Voltage jumpers for easy changing between voltages
- Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly
- Reduced footprint provides additional room in your rig
- Compact design protects the flow meters and hose connections from being damaged in your rig
$47,410.00
Reactor 2 E-30 Proportioner, 10Kw, Elite
GG 272110
GG 272110
Reactor 2 E-30 Proportioner, 10Kw, Elite $39,760.00
Reactor 2 E-30 Proportioner, 15Kw, Elite
GG 272111
GG 272111
Reactor 2 E-30 Proportioner, 15Kw, Elite $42,070.00
KIT, XTR5+, PACKAGE, AP
GG 273142
GG 273142
KIT, XTR5+, PACKAGE, AP
XTR5+ Gun, Hose and Tip Kit Bundle, replace and save with this Graco XTR5+ Gun, Hose and Tip Kit. The new self-locking needle assembly of the XTR5+ breaks down for cleaning or rebuilds without the need for cumbersome tools. The appearance of the XTR5+ reflects the Xtreme Duty Hose included, providing confidence that hose to tip are rated to 7250 psi maximum working pressure. Combine all of this with multiple Graco XHD RAC tips and you're ready to spray the most challenging of materials. Protective coatings solution in a box - saving you time and money. Save time and money replacing your wetted components Faster gun rebuilds with self-locking needle design XTR5+ maximum fluid pressure: 5000psi (345 bar, 34.5 MPa) Xtreme Duty Hoses included: 3/8 in x 50 ft (15 m), 1/4 in x 6 ft (1.8 m) Multiple XHD RAC tips included - (2) XHD519 $971.00
KIT, XTR7+, PACKAGE, AP
GG 273143
GG 273143
KIT, XTR7+, PACKAGE, AP
XTR7+ Gun, Hose and Tip Kit Bundle, replace and save with this Graco XTR7+ Gun, Hose and Tip Kit. The new self-locking needle assembly of the XTR7+ breaks down for cleaning or rebuilds without the need for cumbersome tools. The appearance of the XTR7+ reflects the Xtreme Duty Hose included, providing confidence that hose to tip are rated to 7250 psi maximum working pressure. Combine all of this with multiple Graco XHD RAC tips and you're ready to spray the most challenging of materials. Protective coatings solution in a box - saving you time and money. Save time and money replacing your wetted components Faster gun rebuilds with self-locking needle design XTR7+ maximum fluid pressure: 7250psi (500 bar, 50 MPa) Xtreme Duty Hoses included: 3/8 in x 50 ft (15 m), 1/4 in x 6 ft (1.8 m) Multiple XHD RAC tips included - (1) XHD317, (1) XHD319 $1,155.00
Kit, Xtr5+ Gun/Hose, 8 Pack, Ap
GG 273144
GG 273144
KIT, XTR5+ GUN/HOSE, 8 PACK, AP
Graco 273144 XTR5+ Gun, Hose and Tip Kit, 8-pack of 273142 with Display Stand
Have multiple spray systems that cannot be down for any reason? Bundle, replace and save with this 8 pack of Graco XTR5+ Gun, Hose and Tip Kits. The new self-locking needle assembly of the XTR5+ breaks down for cleaning or rebuilds without the need for cumbersome tools. The appearance of the XTR5+ reflects the Xtreme Duty Hose included, providing confidence that hose to tip are rated to 5000 psi maximum working pressure. Combine all of this with multiple Graco XHD RAC tips and you're ready to spray the most challenging of materials.
Application: Protective coatings solution in a box - saving you time and money.- Save time and money replacing your wetted components
- Faster gun rebuilds with self-locking needle design
- XTR5+ maximum fluid pressure: 5000psi (345 bar, 34.5 MPa)
- Multiple XHD RAC tips included
- Model: XTR5+
- Includes: Quantity 8 - XTR5+, Hose & Tip KIT (273142), Display Stand
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (MPa): 34.5
- Maximum Working Pressure (psi): 5000
- Number of Pieces: 7
$943.00
KIT, XTR7+ GUN/HOSE, 8 PACK, AP
GG 273145
GG 273145
KIT, XTR7+ GUN/HOSE, 8 PACK, AP
XTR7+ Gun, Hose and Tip Kit, 8-pack of 273143 with Display Stand Have multiple spray systems that cannot be down for any reason? Bundle, replace and save with this 8 pack of Graco XTR7+ Gun, Hose and Tip Kits. The new self-locking needle assembly of the XTR7+ breaks down for cleaning or rebuilds without the need for cumbersome tools. The appearance of the XTR7+ reflects the Xtreme Duty Hose included, providing confidence that hose to tip are rated to 7250 psi maximum working pressure. Combine all of this with multiple Graco XHD RAC tips and you're ready to spray the most challenging of materials. Protective coatings solution in a box - saving you time and money. Save time and money replacing your wetted components Faster gun rebuilds with self-locking needle design XTR7+ maximum fluid pressure: 7250psi (500 bar, 50 MPa) Xtreme Duty Hoses included: 3/8 in x 50 ft (15 m), 1/4 in x 6 ft (1.8 m) Multiple XHD RAC tips included $1,130.00
Pm Series Valve, Pm8, NPT, Rigid
GG 273156
GG 273156
PM SERIES VALVE, PM8, NPT, RIGID
Graco 273156 PM 8 Electronic Preset Oil Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 8
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 4.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 60 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 54.4
- Overall Length (in): 21.4
- Overall Length (mm): 544
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,225.00
Pm Series Valve, Pm8, NPT, Flex
GG 273157
GG 273157
PM SERIES VALVE, PM8, NPT, FLEX
Graco 273157 PM 8 Electronic Preset Oil Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 8
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 4.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 60 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 78
- Overall Length (in): 30.7
- Overall Length (mm): 780
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,225.00
Pm Series Valve, Pm20, 1/2in NPT, Flex
GG 273166
GG 273166
PM SERIES VALVE, PM20, 1/2"NPT, FLEX
Graco 273166 PM 20 Electronic Preset Oil Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 20
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 75708
- Maximum Flow Rate (cc/sec): 1262
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 10.3 Bar at 12 GPM
- Meter Pressure Loss (psi): 150 PSI at 12 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 78
- Overall Length (in): 30.7
- Overall Length (mm): 780
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,350.00
Pm Series Valve, Pm20, 3/4 in NPT, Rigid
GG 273167
GG 273167
PM SERIES VALVE, PM20, 3/4"NPT, RIGID
Graco 273167 PM 20 Electronic Preset Oil Meter - Rigid Extension - 3/4 in. (19 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 20
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.91
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 75708
- Maximum Flow Rate (cc/sec): 1262
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 10.3 Bar at 12 GPM
- Meter Pressure Loss (psi): 150 PSI at 12 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 54.4
- Overall Length (in): 21.4
- Overall Length (mm): 544
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,350.00
Pm Series Valve, Pm20, 3/4 in NPT, Flex
GG 273168
GG 273168
PM SERIES VALVE, PM20, 3/4"NPT, FLEX
Graco 273168 PM 20 Electronic Preset Oil Meter - Flexible Extension - 3/4 in. (19 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 20
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.91
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 75708
- Maximum Flow Rate (cc/sec): 1262
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 10.3 Bar at 12 GPM
- Meter Pressure Loss (psi): 150 PSI at 12 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 78
- Overall Length (in): 30.7
- Overall Length (mm): 780
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,350.00
KING SPRAYER, E60, HDC, IF, PKG, HAZ-LOC
GG 273246
GG 273246
KING SPRAYER, E60, HDC, IF, PKG, HAZ-LOC
King E60 Hazardous Location Heavy Duty Cart Integrated Filter Gun Hose Whip TipThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$14,570.00
KING SPRAYER, E60, HDC, IF, BARE, HAZ-LOC
GG 273247
GG 273247
KING SPRAYER, E60, HDC, IF, BARE, HAZ-LOC
King E60 Hazardous Location Heavy Duty Cart Integrated Filter BAREThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$13,870.00
King Sprayer, E60, Wall, If, Pkg, Haz-Loc
GG 273250
GG 273250
KING SPRAYER, E60, WALL, IF, PKG, HAZ-LOC
Graco 273250 King E60 Hazardous Location Wall Mount Integrated Filter Gun Hose Whip Tip
The Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
Application: The superior electric solution for spraying protective coatings- Electric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
- No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
- Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
- ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
- Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
- Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
- Model: King
- Series: E60
- Amperage (A): 120V/25A, 240V/15A
- Approved for Hazardous Locations: Yes
- Compatible Material: Protective Coating
- Control Type: Pressure Control Knob
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/2, 3/8
- Fluid Outlet Size (mm): 12.7, 9.525
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Frame Configuration: Wall Mount
- Frequency (Hz): 50/60
- Gun Included: 1
- Gun Model: XTR+
- Hose Inlet Diameter (cm): 0.9525
- Hose Inlet Diameter (in): 3/8
- Hose Inlet Diameter (mm): 9.525
- Includes: Gun, Hose, Whip, Tip
- Inlet Paint Strainer: 8 Mesh, 16 Mesh
- Lower Configuration: Integrated Filter
- Lower Type: 115cc Xtreme Duty Lower
- Material Application: Protective Coatings
- Maximum Continuous Cycle Rate (CPM): 44
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.6
- Maximum Fluid Working Pressure (psi):
$14,840.00
King Sprayer, E60, Wall, If, Bare, Haz-Loc
GG 273251
GG 273251
KING SPRAYER, E60, WALL, IF, BARE, HAZ-LOC
Graco 273251 King E60 Hazardous Location Wall Mount Integrated Filter BARE
The Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
Application: The superior electric solution for spraying protective coatings- Electric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
- No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
- Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
- ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
- Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
- Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
- Model: King
- Series: E60
- Amperage (A): 120V/25A, 240V/15A
- Approved for Hazardous Locations: Yes
- Compatible Material: Protective Coating
- Control Type: Pressure Control Knob
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/2, 3/8
- Fluid Outlet Size (mm): 12.7, 9.525
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Frame Configuration: Wall Mount
- Frequency (Hz): 50/60
- Gun Included: 0
- Gun Model: No Applicator
- Hose Inlet Diameter (cm): 0.9525
- Hose Inlet Diameter (in): 3/8
- Hose Inlet Diameter (mm): 9.525
- Inlet Paint Strainer: 8 Mesh, 16 Mesh
- Lower Configuration: Integrated Filter
- Lower Type: 115cc Xtreme Duty Lower
- Material Application: Protective Coatings
- Maximum Continuous Cycle Rate (CPM): 44
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.6
- Maximum Fluid Working Pressure (psi): 6000
- Maximum Hose Length (ft): 21
$14,140.00
KING SPRAYER, E50, HDC, IF, BARE, HAZ-LOC
GG 273253
GG 273253
KING SPRAYER, E50, HDC, IF, BARE, HAZ-LOC
King E50 Hazardous Location Heavy Duty Cart Integrated Filter BAREThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$13,590.00
KING SPRAYER, E50, HDC, IF, PKG, HAZ-LOC
GG 273252
GG 273252
KING SPRAYER, E50, HDC, IF, PKG, HAZ-LOC
King E50 Hazardous Location Heavy Duty Cart Integrated Filter Gun Hose Whip TipThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$14,270.00
KING SPRAYER, E50, WALL, IF, PKG, HAZ-LOC
GG 273256
GG 273256
KING SPRAYER, E50, WALL, IF, PKG, HAZ-LOC
King E50 Hazardous Location Wall Mount Integrated Filter Gun Hose Whip TipThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$14,570.00
KING SPRAYER, E50, WALL, IF, BARE, HAZ-LOC
GG 273257
GG 273257
KING SPRAYER, E50, WALL, IF, BARE, HAZ-LOC
King E50 Hazardous Location Wall Mount Integrated Filter BAREThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$13,870.00
KING SPRAYER, E60, HF-HDC, NF, PKG, HAZ-LOC
GG 273262
GG 273262
KING SPRAYER, E60, HF-HDC, NF, PKG, HAZ-LOC
King E60 Hazardous Location Heavy Fluids Heavy Duty Cart Hopper No Filter Gun Hose Whip TipThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$16,070.00
KING SPRAYER, E50, HF-HDC, NF, PKG, HAZ-LOC
GG 273264
GG 273264
KING SPRAYER, E50, HF-HDC, NF, PKG, HAZ-LOC
King E50 Hazardous Location Heavy Fluids Heavy Duty Cart Hopper No Filter Gun Hose Whip TipThe Graco King E-series Electric Airless Sprayer is for protective coatings and select models have been approved for hazardous locations. The King E-series operates on a more reliable, convenient and available electric power source, which removes job site reliance on compressed air. Furthermore, electric technology reduces pulsation and eliminates motor icing, making your jobs run smoother every single time.
The superior electric solution for spraying protective coatingsElectric
- When wired correctly, electric power is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. The days of essential maintenance on large-scale compressors are over.
No Icing
- By eliminating the need for an air motor, icing is a historic problem. More prevalent in conditions with a high level of humidity, icing of an air motor results in a slowing of the motor and loss of pressure which can be detrimental to your production rates.
Reduced Noise
- No matter the application, noise exposure can dramatically affect your working conditions. The quiet electric motor improves working conditions significantly. When compared to an air motor, the King E-series is up to 5X quieter.
Plug-in & Spray
- The King E-series runs on multiple power options (120V or 240V). Able to handle Graco’s most popular airless spray tip sizes with a consistent pattern thanks to the low rate of pulsation. This smooth pattern is noticeable at the gun.
ATEX Approved
- Get the job done safely: compared to other electric sprayers, the King E-series is approved for hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where generating a spark is of concern.
Energy Savings
- With improved efficiency and an overall lower cost of ownership, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air operated sprayer
Three-Year Limited Warranty
- Every piece of equipment we manufacture comes with one of the industry’s strongest warranties. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty.
$15,800.00