GRACO INC. S10595

GG CM9C2F

GG CM9C59

GG CM9C5A

GG CM9F2B

GG CM9F2F

GG CM9F3F

GG CM9F5A

GG CM9F59

GG CM9GLB

CHECK-MATE SUPPLY UNIT, 61:1, 120VAC, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CMNN59

GG CMNN5A

GG CMNN79

GG CS00F1

FUSION CS GUN, FL0000, FT0424

Graco CS00F1 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS00F2

FUSION CS GUN, FL0000, FT0438

Graco CS00F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.097
• Fluid Orifice Size (in): 0.038
• Fluid Orifice Size (mm): 0.97

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS00F3

FUSION CS GUN, FL0000, FT0624

Graco CS00F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maxim

GG CS00F4

FUSION CS GUN, FL0000, FT0638

Graco CS00F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maxim

GG CS00F5

GG CS00F6

FUSION CS GUN, FL0000, FT0848

Graco CS00F6 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.048 in (1.2 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS00WD

FUSION CS GUN, WD0000

Graco CS00WD Fusion CS Gun, 15 in (381 mm) Wide Round Spray Pattern, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.071
• Fluid Orifice Size (in): 0.028
• Fluid Orifice Size (mm): 0.71

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa):

GG CS01F1

GG CS01F3

FUSION CS GUN, FL0101, FT0624

Graco CS01F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS01F2

FUSION CS GUN, FL0101, FT0438

Graco CS01F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS01F4

FUSION CS GUN, FL0101, FT0638

Graco CS01F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temper

GG CS01F5

FUSION CS GUN, FL0101, FT0838

Graco CS01F5 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS01F6

GG CS01RD

FUSION CS GUN, RD0101

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Variable flow - an industry first

• First plural-component gun with variable flow
• Switch from large to small spray patterns in seconds
• Gives you more maneuverability to spray in small, tight areas
• Ten different settings

Quick-change front - simpler and cleaner

• Swap out fluid heads in seconds
• Non-stick polymer cover keeps gun head cleaner
• "Air knife" reduces material build-up
• Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

GG CS01WD

FUSION CS GUN, WD0101

Graco CS01WD Fusion CS Gun, 16 in (406 mm) Wide Round Spray Pattern, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.099
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 0.99

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa):

GG CS02F1

FUSION CS GUN, FL0202, FT0424

Graco CS02F1 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS02F2

FUSION CS GUN, FL0202, FT0438

Graco CS02F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS02F3

FUSION CS GUN, FL0202, FT0624

Graco CS02F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS02F4

FUSION CS GUN, FL0202, FT0638

Graco CS02F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS02F5

FUSION CS GUN, FL0202, FT0838

Graco CS02F5 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Foam, Polyurea
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Max

GG CS02F6

FUSION CS GUN, FL0202, FT0848

Graco CS02F6 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.048 in (1.2 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS02WD

FUSION CS GUN, WD0202

Graco CS02WD Fusion CS Gun, 18 in (457 mm) Wide Round Spray Pattern, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.117
• Fluid Orifice Size (in): 0.046
• Fluid Orifice Size (mm): 1.17

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa):

GG CS03RD

FUSION CS GUN, RD0303

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Variable flow - an industry first

• First plural-component gun with variable flow
• Switch from large to small spray patterns in seconds
• Gives you more maneuverability to spray in small, tight areas
• Ten different settings

Quick-change front - simpler and cleaner

• Swap out fluid heads in seconds
• Non-stick polymer cover keeps gun head cleaner
• "Air knife" reduces material build-up
• Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

GG CS2010

GG CS2011

GG CS20F1

FUSION CS GUN, FL2020, FT0424

Graco CS20F1 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.020 in (0.51 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.020
• Impingement Port Size (mm): 0.50
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS20F2

FUSION CS GUN, FL2020, FT0438

Graco CS20F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.020 in (0.51 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.051
• Fluid Orifice Size (in): 0.020
• Fluid Orifice Size (mm): 0.51

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.020
• Impingement Port Size (mm): 0.50
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS20RD

FUSION CS GUN, RD2020

Graco CS20RD Fusion CS Gun, Round Spray Pattern, 0.020 in (0.51 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.051
• Fluid Orifice Size (in): 0.020
• Fluid Orifice Size (mm): 0.51

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.020
• Impingement Port Size (mm): 0.50
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Max

GG CS2110

GG CS2111

GG CS2572

GG CS2614

GG CS9082

REACTOR E-8P SYSTEM, FUSION CS

Graco CS9082 Reactor E-8P Proportioner Package, Fusion CS Gun, 120 V

Designed specifically for new no-heat foam insulation formulations, the Reactor E-8p produces an air-seal solution that's in demand by homeowners who want to make their homes more energy-efficient. Whether you're expanding your existing insulation application opportunities or just starting your business, the Reactor E-8p provides a quick return on investment. As a touch-up system, the Reactor E-8p frees up larger rigs for medium and large jobs, while enabling you to finish the job affordably.

• Best choice for portability and high-quality foam
  • Haul it in your van or pickup truck
  • Easy to move up and down stairs
  • Telescoping handle and wheels makes it easy to maneuver at the job site
  • Plugs into a standard residential outlet (120 VAC, 15 amp)
  • Weighs just 96 pounds (44 kg)
  • Easy to read pressure gauges ensure you're spraying on-ratio and delivering high-quality foam
  • An economical alternative to froth kits
• Electric Motor
  • Proven motor performance, uses standard residential outlet
• Telescoping Handle
  • Easy handling from your vehicle to the home
• Lightweight
  • Easy to maneuver up and down stairs – only 95 lb (43 kg)
• Threaded Bucket Spout Connection
  • Keeps your connection secure and prevents spills
• Pressure Balance Valves
  • Quick and easy balancing of system pressures enables correct start-up
• Simple User Controls
  • Intuitive start/stop with single control knob

• Model: Reactor
• Series: E-8P

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: Quick-Disconnect Pin

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Thread Type: NPSM

• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion CS

• Hose Length (ft): 50
• Hose Length (m): 15.2

• Includes: Proportioner, Fusion CS Gun, Insulated Hose Bundle

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Mix Ratio: 1:1

• Overall Depth (cm): 38.3
• Overall Depth (in): 15.06
• Overall Depth (mm): 383

• Overall Height (cm): 61.3
• Overall Height (in): 24.12
• Overall Height (mm): 613
• Overall Width (cm): 87.8
• Overall Width (in): 34.58
• Overall Width (mm): 878

• Power Source: Electric

• Pressure Type: Low Pressure
• Product Type: Plural Component

GG CS9083

REACTOR E-8P SYSTEM, 240V, FUSION CS

Graco CS9083 Reactor E-8P Proportioner Package, Fusion CS Gun, 240 V

The Reactor E-8p Portable Plural-Component Sprayer offers the mobility and efficiency you need to complete small to medium sized joint filling jobs with ease. With easy control and the ability to pump directly from five-gallon material pails, the Reactor E-8p can help you reduce work time and labor costs.

• Lightweight and Portable
  • Built in handles for easy carrying
  • Weighs just 95 pounds (43 kg)
  • Easy to maneuver
  • Simple siphon feeding from 5 gal (19 L) buckets
• Efficient and Fast
  • Simple user controls
  • Electric motor offers high performance while reducing operating costs
  • Recommended maximum output of 0.25 gpm (.95 lpm)
• Built for Maximum Usability
  • Simple, single control knob operation
  • Onboard hose wrap makes storing equipment simple and fast
  • Plugs into standard electrical wall outlet
  • Built-in suction lines allow for use with 5-gal (19 L) pails
• Lightweight and Portable
  • Easy to maneuver up and down stairs, wherever the job goes – only 95 lb (43 kg)
• Alarm / Status Indicator
  • Shuts down unit if off-ratio conditions exist – assures good quality foam at the job site
• Desiccant Air Dryer
  • Allows air to be drawn into pail, protects material from contamination.
• Pressure Balance Valves
  • Quick and easy balancing of system pressures enables correct start-up
• Threaded Bucket Spout Connection
  • Keeps your connection secure and prevents spills
• Electric Motor
  • Proven motor performance and reduced operating costs, plugs into a standard residential outlet
• Easy Controls
  • Intuitive start/stop with single knob operation
• Spray Guns
  • Uses standard Graco Fusion or P2 Guns, provides consistent spray patterns
• Non-heated Hose
  • Easy to maneuver – 70% lighter than standard Reactor heated hose
• Carrying Handle/Hose Wrap
  • Easy to transport, convenient hose storage

• Model: Reactor
• Series: E-8P

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: Quick-Disconnect Pin

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Thread Type: NPSM

• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion CS

• Hose Length (ft): 50
• Hose Length (m): 15.2

• Includes: Proportioner, Fusion CS Gun, Insulated Hose Bundle

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Mix Ratio: 1:1

• Overall Depth (cm): 38.3
• Overall Depth (i

GG CS9570

GG CS9571

GG CS9572

GG CSC200

GG CSC201

GG CSC202

GG CSH031

GG CSH032

GG CSH131

GG CSH132

GG CSR312

PACKAGE, E20, R3, ELITE, IH, E1

• Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps

• Automatically shuts down when you run out of material.
• Prevents air from entering the system that can cause off-ratio issues. * Requires Core E1 pumps

• Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials

• Automatically adjusts temperatures to optimize fluid pressures and maximize yield

• Select desired heater wattage for reduced power consumption

• Automatically stay up to date with the latest Reactor software

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen

• Control A and B materials to different temperatures for improved pressure balancing
• Optimizes yield

• Brushless motor for improved pressure/flow performance
• New temperature control boards for independent hose heat
• Voltage jumpers for easy changing between voltages
• Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly

• Reduced footprint provides additional room in your rig
• Compact design protects the flow meters and hose connections from being damaged in your rig

GG CSR322

PACKAGE, EXP1, R3, ELITE, IH, E1

• Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps

• Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials

• Automatically adjusts temperatures to optimize fluid pressures and maximize yield

• Select desired heater wattage for reduced power consumption

• Automatically stay up to date with the latest Reactor software

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen

• Control A and B materials to different temperatures for improved pressure balancing
• Optimizes yield

• Brushless motor for improved pressure/flow performance
• New temperature control boards for independent hose heat
• Voltage jumpers for easy changing between voltages
• Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly

• Reduced footprint provides additional room in your rig
• Compact design protects the flow meters and hose connections from being damaged in your rig

GG CSR332

PACKAGE, E30, R3, ELITE, IH, E1

• Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps

• Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials

• Automatically adjusts temperatures to optimize fluid pressures and maximize yield

• Select desired heater wattage for reduced power consumption

• Automatically stay up to date with the latest Reactor software

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen

• Control A and B materials to different temperatures for improved pressure balancing
• Optimizes yield

• Brushless motor for improved pressure/flow performance
• New temperature control boards for independent hose heat
• Voltage jumpers for easy changing between voltages
• Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly

• Reduced footprint provides additional room in your rig
• Compact design protects the flow meters and hose connections from being damaged in your rig

GG CSR357

PACKAGE, H30, R3, 60HZ, ELITE, IS, CORE

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG CSR342

PACKAGE, EXP2, R3, ELITE, IH, E1

• Katalyst full system communication and control that improves performance, ratio and yield. * Requires Core E1 pumps

• Automatically shuts down when you run out of material.
• Prevents air from entering the system that can cause off-ratio issues. * Requires Core E1 pumps

• Automatically monitors and adjusts fluid inlet pressures to compensate for high viscosity materials

• Automatically adjusts temperatures to optimize fluid pressures and maximize yield

• Select desired heater wattage for reduced power consumption

• Automatically stay up to date with the latest Reactor software

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen

• Control A and B materials to different temperatures for improved pressure balancing
• Optimizes yield

• Brushless motor for improved pressure/flow performance
• New temperature control boards for independent hose heat
• Voltage jumpers for easy changing between voltages
• Robust UL listed electrical hose connectors are color coded and keyed for error proof assembly

• Reduced footprint provides additional room in your rig
• Compact design protects the flow meters and hose connections from being damaged in your rig

GG CSR367

PACKAGE, HXP2, R3, 60HZ, ELITE, IS, CORE

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG CSR377

GG CSR378

GG CSR388

PACKAGE, HXP3, R3, 400V, ELITE, IS, CORE

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG CSR387

PACKAGE, HXP3, R3, 230V, ELITE, IS, CORE

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG CSR389

GG CSR390

GG CST227

GG CSR392

PACKAGE, HXP2, R3, 50HZ, ELITE, IS, CORE

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG CST231

GG CST321

GG CST651

GG CST671

GG CSTS31

GG CSTS56

GG CSTS88

GG CSTS92

GG CU1011

GG CU1772

GG D01000

KIT, O-RING-A0 & A1 FK-PT-4

Graco D01000 1/4-inch Encapsulated Viton Seal Kit

GG D01026

GG D01090

KIT, CHECK VALVE-A1 PP

GG D010A6

GG D03005

KIT, DIAPHRAGM-BI TP

GG D03006

KIT, DIAPHRAGM-BI SP

GG D03007

KIT, DIAPHRAGM-BI BN

GG D03030

KIT, BALL-B1 SS

GG D03050

KIT, BALL-B1 TP

GG D03060

KIT, BALL-B1 SP

GG D03070

KIT, BALL-B1 BN

GG D03235

GG D03300

KIT, SEAT 307 SS

GG D03330

GG D03337

GG D03366

GG D03900

KIT, SEAT 307 PP

GG D05008

KIT, DIAPHRAGM-C1 FK

GG D05060

KIT, BALL-C1 SP

GG D05070

KIT, BALL-C1 BN