GRACO INC. S10595
GRACO INC. S10595 branded products
CLAMP, 7/16 TUBE 4TS6-14002
GG 557944
GG 557944
CLAMP, 7/16 TUBE 4TS6-14002
Tube/Hose Clamp - 7/16 inch OD For use with LubriSystem®.7/16 inch (11.11 mm) diameter
Lubriquip part number 550-400-050 $1.75
FITTING, UNION, BLKHD, 5/8 X 1/8
GG 557950
GG 557950
FITTING, UNION, BLKHD, 5/8 X 1/8
Bulkhead Union Fitting - 1/8 inch (3.2 mm) NPTBulkhead FTG - 1/8 inch (3.2 mm) NPT
Lubriquip part number 550-400-450 $12.30
FITTING, ELB 1/4-28 X 1/8PM
GG 557954
GG 557954
FITTING, ELB 1/4-28 X 1/8PM
45° Street Elbow Adapter, 1/4-28 SAE Male x 1/8 NPTF Female Used with Grease Jockey systems to replace ball joint (drag link, tie rod) fittings, when a 45° elbow is needed. Adapter - 45° Street Elbow 1/4-28" SAE Male x 1/8" NPTF Female Zinc-Plated Steel Lubriquip part number 550-400-870 $16.50
KIT, SEAL VIKING
GG 557997
GG 557997
KIT, SEAL VIKING
Meter-Flo® Seal Kit For use with Meter-Flo Pumps.MeterFlo Seal Kit - 540-800-XX1 Models
Lubriquip part number 560-001-460 $83.50
CABLE, CONN 6'
GG 558023
GG 558023
CABLE, CONN 6'
Proximity Switch Connector Cable - 6 ft, 5-Pin For use with Proximity Switches.5-pin cable, straight connector, 6 feet (1.83 m)
Lubriquip part number 570-999-160 $126.50
FITTING, ORIFICE, 1/8 MP X 3/32 TUBE
GG 558220
GG 558220
FITTING, ORIFICE, 1/8 MP X 3/32 TUBE
Thrif-T Luber Hardware - TLBF-00 - Bearing Fitting, 1/8 MP X 3/32 Tube For use with Thrif-T Luber®Thrif-T Luber Hardware - TLBF-00 - Bearing Fitting
Lubriquip part number 464-100-100 $26.40
Piston Injector, Pd, Sgl Pt, 3400, M8X1
GG 558306
GG 558306
Piston Injector, Pd, Sgl Pt, 3400, M8X1 $44.30
Piston Injector, Pd, Sgl Pt, 3400, M8X1
GG 558307
GG 558307
Piston Injector, Pd, Sgl Pt, 3400, M8X1 $44.30
Piston Injector, Pd, Sgl Pt, 3400, M8X1
GG 558308
GG 558308
Piston Injector, Pd, Sgl Pt, 3400, M8X1 $44.30
Piston Injector, Pd, Sgl Pt, 3400, M8X1
GG 558309
GG 558309
Piston Injector, Pd, Sgl Pt, 3400, M8X1 $44.30
Piston Injector, Pd, Sgl Pt, 3400, M8X1
GG 558310
GG 558310
Piston Injector, Pd, Sgl Pt, 3400, M8X1 $44.30
NUT, HEX, 1/4-28, SST
GG 558633
GG 558633
NUT, HEX, 1/4-28, SST
Trabon® MSP Divider Valve - Stainless Steel Tie Rod Nut For use with Trabon® MSP Stainless Steel Divider Valves. Tie rod nuts - SS (3 required) Lubriquip part number 410-702-002 $1.80
CLIP, HALF 3/8 TUBE STL
GG 558711
GG 558711
CLIP, HALF 3/8 TUBE STL
Half Clip - Holds 1 - 3/8” (6.35 mm) OD tubeTube Clip - Holds 1 - 3/8” (9.52 mm) OD tube
Lubriquip part number 500-991-000 Trabon part number 991 $3.65
PLUG, STL 1/8 BSPP HEX SOC HD
GG 558799
GG 558799
PLUG, STL 1/8 BSPP HEX SOC HD
Trabon® MSP Divider Valve - Outlet Port Plug, BSPP For use with Trabon® MSP Divider Valves.Outlet Port Plug - 1 outlet port plug is required for each “S” valve section
BSPP with face seal
Lubriquip part number 412-700-404 $3.60
GAUGE, 1000PSI, DRY, CB, 1/8
GG 558899
GG 558899
GAUGE, 1000PSI, DRY, CB, 1/8
Pressure Gauge, 0-1000 psi For use with Maxi-Flo Electric Pumps.Gauge, 0-1,000 psi
Lubriquip part number 493-020-241 $57.75
FITTING, ANCHOR STR 1/2
GG 558910
GG 558910
FITTING, ANCHOR STR 1/2
Anchor Mount - 180° Straight Anchor Fitting, 1/2 in. NPSF180° Straight Anchor Fitting
1/2" NPSF
Lubriquip part number 509-195-000 Trabon part number 9195 $99.50
METER-FLO PUMP, 76/116 CU IN/MIN CW NPT
GG 558950
GG 558950
METER-FLO PUMP, 76/116 CU IN/MIN CW NPT
Meter-Flo® Electric Pump, 117 cu in/min (1917 cc/min) @ 1,725 rpm, NPT Ports, CWWith its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-051 $1,545.00
METER-FLO PUMP, 111/167 CU IN/MIN CW NPT
GG 558951
GG 558951
METER-FLO PUMP, 111/167 CU IN/MIN CW NPT
Meter-Flo® Electric Pump, 168 cu in/min (2753 cc/min) @ 1,725 rpm, NPT Ports, CWWith its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-071 $1,545.00
METER-FLO PUMP, 9/14 CU IN/MIN CCW SAE
GG 558952
GG 558952
METER-FLO PUMP, 9/14 CU IN/MIN CCW SAE
Lubriquip part number 540-800-370 $1,545.00
Meter-Flo Pump, 9/14 Cu in/Min ccw Sae
GG 558953
GG 558953
Meter-Flo Pump, 9/14 Cu In/Min Ccw Sae $1,545.00
Meter-Flo Pump, 26/40 Cu in/Min ccw Sae
GG 558954
GG 558954
Meter-Flo Pump, 26/40 Cu In/Min Ccw Sae $1,545.00
METER-FLO PUMP, 156/235 CU IN/MIN CW NPT
GG 558955
GG 558955
METER-FLO PUMP, 156/235 CU IN/MIN CW NPT
Meter-Flo® Electric Pump, 245 cu in/min (4015 cc/min) @ 1,725 rpm, NPT Ports, CWWith its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-940 $1,545.00
BRACKET, MNG PUMP
GG 558956
GG 558956
BRACKET, MNG PUMP
C-Face Pump Mounting Bracket with Drive Coupling for Trabon® Meter-Flo® Pump Packages For use with Meter-Flo® Pump Packages.Pump Mounting Bracket, C Face, w/ Drive Coupling
Lubriquip part number 540-835-000 $572.00
CABLE, CONN 5PIN B/H
GG 558965
GG 558965
CABLE, CONN 5PIN B/H
Proximity Switch Connector Cable - 6 ft, 5-Pin, 90° Connector For use with Series-Flo® Divider Valves and Proximity Switches.5-pin connection cable, 90°, 6ft
Lubriquip part number 570-999-390 $208.50
Dispense Tube, Urethane, 1/4id x 3/8od, 10Pac
GG 5590-U.250X8IN
GG 5590-U.250X8IN
Dispense Tube, Urethane, 1/4Idx3/8Od, 10Pac $130.00
SIGHTGLASS, FD WHITE BACKGROUND
GG 560046
GG 560046
SIGHTGLASS, FD WHITE BACKGROUND
Lubriquip part number 050101 Kipp/KLS/MEGA part number SV-31-D(WHITE) $112.00