GRACO INC. S10595

GG 288184

GG 288190

KIT, NEEDLE ASSY (SST/DELRIN)

Graco 288190 Fluid Needle, SST ball, acid catalyzed materials/very low viscosity materials

GG 288196

KIT, DIFFUSER AIRLESS

Graco 288196 Ball Seat Diffuser- 3/16 in

GG 288194

KIT, AIRCAP ASSY, H.P.

Graco 288194 Standard Air Cap used with AAP, GG4, GG5, and AAM Series

• Compatible Material: Solvents, Paint, Coating, Lubrication-Fluid

GG 288192

KIT, DIFFUSER ASSY

Graco 288192 Diffuser-Seat, carbide seat, standard viscosity/standard flow

GG 288193

GG 288197

GG 288200

GG 288221

MANIFOLD, BOTTOM INLET (IN)

Graco 288221 Manifold with bottom fluid ports

GG 288224

MANIFOLD, ADJUSTABLE,DELTA,HIGH PRS

Graco 288224 High Pressure Air Assisted Manifold with side fluid ports and manual fan adjustment valve

GG 288217

MANIFOLD, SIDE INLET (IN)

Graco 288217 North America Manifold with Side Fluid Ports

GG 288311

REGULATOR, BACK PRESSURE

Graco 288311 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 1-1/2 npt

• PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
• Stainless steel wetted materials are compatible with catalyst and waterborne materials
• Hardened stainless steel seat ensure low wear and long life
• Air operated for remote automated control to eliminate operator interference

• Compatible Material: Catalyst, Waterborne

• Gauge Port Size (cm): 0.635
• Gauge Port Size (in): 1/4
• Gauge Port Size (mm): 6.35

• Gauge Port Type: NPT

• Includes: Gauge
• Inlet Size (cm): 3.81
• Inlet Size (in): 1-1/2
• Inlet Size (mm): 38.1

• Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 70
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 20
• Maximum Flow Rate (L/min): 75.7

• Maximum Regulated Pressure (bar): 17.2
• Maximum Regulated Pressure (kPa): 1720
• Maximum Regulated Pressure (psi): 250

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (psi): 300

• Minimum Regulated Pressure (bar): 1.7
• Minimum Regulated Pressure (kPa): 170
• Minimum Regulated Pressure (MPa): 0.017
• Minimum Regulated Pressure (psi): 25

• Outlet Size (cm): 3.81
• Outlet Size (in): 1-1/2
• Outlet Size (mm): 38.1
• Outlet Thread Type: NPT

GG 288251

GG 288262

REGULATOR, BACK PRESSURE

Graco 288262 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 2 inch tri-clamp

• PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
• Stainless steel wetted materials are compatible with catalyst and waterborne materials
• Hardened stainless steel seat ensure low wear and long life
• Air operated for remote automated control to eliminate operator interference

• Compatible Material: Catalyst, Waterborne

• Gauge Port Size (cm): 0.635
• Gauge Port Size (in): 1/4
• Gauge Port Size (mm): 6.35

• Gauge Port Type: NPT

• Includes: Gauge
• Inlet Size (cm): 5.08
• Inlet Size (in): 2
• Inlet Size (mm): 50.8

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 70
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 20
• Maximum Flow Rate (L/min): 75.7

• Maximum Regulated Pressure (bar): 17.2
• Maximum Regulated Pressure (kPa): 1720
• Maximum Regulated Pressure (psi): 250

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (psi): 300

• Minimum Regulated Pressure (bar): 1.7
• Minimum Regulated Pressure (kPa): 170
• Minimum Regulated Pressure (MPa): 0.017
• Minimum Regulated Pressure (psi): 25

• Outlet Size (cm): 5.08
• Outlet Size (in): 2
• Outlet Size (mm): 50.8

GG 288420

CONTRACTOR GUN, RAC X(PKGD)

• Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
• Fluid pushes on seal to quickly shut off needle and reduce spitting
• Spring is located outside fluid path for better flow
• Helps eliminate pack out and slow needle shut-off

• Repositioned seat is closer to the tip, eliminating 60% of the dead space
• Less paint left between needle and tip results in less spitting

• Form-fitted handle provides maximum control and comfort
• Detachable trigger guard swings clear of gun handle for easy filter access
• Lightweight design reduces operator fatigue

• Smooth, lightweight trigger pull with simple, thumb-engaged safety lock

• Simply remove the trigger cross pin and unthread front housing to change out needle

• Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!

• Filters from the inside out to prevent filter from collapsing
• Interchangeable with all Contractor series guns

GG 288429

FTX GUN, 2FINGER, RAC X 515, PKG

• Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
• Fluid pushes on seal to quickly shut off needle and reduce spitting
• Spring is located outside fluid path for better flow
• Helps eliminate pack out and slow needle shut-off

• Repositioned seat is closer to the tip, eliminating 60% of the dead space
• Less paint left between needle and tip results in less spitting

• Form-fitted handle provides maximum control and comfort
• Detachable trigger guard swings clear of gun handle for easy filter access
• Lightweight design reduces operator fatigue

• Smooth, lightweight trigger pull with simple, thumb-engaged safety lock

• Simply remove the trigger cross pin and unthread front housing to change out needle

• Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!

• Filters from the inside out to prevent filter from collapsing
• Interchangeable with all Contractor series guns

GG 288431

FTX GUN, RAC 5(PKGD)

• Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
• Fluid pushes on seal to quickly shut off needle and reduce spitting
• Spring is located outside fluid path for better flow
• Helps eliminate pack out and slow needle shut-off

• Repositioned seat is closer to the tip, eliminating 60% of the dead space
• Less paint left between needle and tip results in less spitting

• Form-fitted handle provides maximum control and comfort
• Detachable trigger guard swings clear of gun handle for easy filter access
• Lightweight design reduces operator fatigue

• Smooth, lightweight trigger pull with simple, thumb-engaged safety lock

• Simply remove the trigger cross pin and unthread front housing to change out needle

• Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!

• Filters from the inside out to prevent filter from collapsing
• Interchangeable with all Contractor series guns

GG 288489

KIT, GUN/HOSE, CONT, RACX, 1/4 X

Contractor Airless Spray Gun

• The industry standard for performance and durability for over a decade

RAC X LTX 517 SwitchTip

• Provides a 10 inch spray pattern
• Ideal for larger surfaces such as houses/buildings, walls and ceilings
• 100% tested for flow rate

• The lightest, most flexible hoses on the market
• Easy to connect and maintain
• The highest level of performance from the sprayer to the gun

• Contractor Airless Spray Gun
• RAC X LTX 517 SwitchTip and Guard
• 3/8 inch diameter by 50 feet BlueMax II Hose
• 3 foot BlueMax II Whip Hose

GG 288839

KIT, ACCESSORY,GUARD,RAC,AA

Graco 288839 AA RAC Guard for Flat Tip RAC Tip Air Cap Conversion Kit

GG 288887

GG 288897

GG 288749

KIT, FLTR, SG20/SG PRO, 60 MESH

GG 288863

GG 288810

GG 288501

KIT, GUN/HOSE, CONT, FF, 3/16 X 25'

Get up and spraying quickly on fine finish applications with industry-proven performance. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.

Contractor Airless Spray Gun

• The industry standard for performance and durability for over a decade

RAC X FF LP 210 & 312 SwitchTips

• Provides the industry’s best fine finish at the lowest airless spray pressure
• Reduced overspray
• Longer pump life

BlueMax II Airless Hoses

• The lightest, most flexible hoses on the market
• Easy to connect and maintain
• The highest level of performance from the sprayer to the gun

Kit Includes:

• Contractor Airless Spray Gun
• RAC X FF LP 210 and 312 SwitchTips
• BlueMax II Airless Hose 3/16 in x 25 ft
• 10 in Extension
• 2 - 100 Mesh Filters
• Solvent Seal Kit
• Cleaning Brush

GG 288896

GG 288807

GG 288794

GG 288687

GG 288716

STRAINER, INLET, MAGNUM

GG 288732

GG 288891

GG 288862

GG 288747

KIT, FLTR, PUMP, 40MESH, MAGNUM

GG 288554

AUTOPLUS GUN, AIRLESS

Less maintenance and more system uptime

GG 245848

GG 245850

GG 245863

GG 245864

GG 245285

HANDLE, REPL.,85KV,AS,STD GUN

Graco 245285 ProXs Manual Electrostatic Air Spray Gun Handle, hook included, 60 kV, 85 kV

GG 245290

HANDLE, REPL.,60KV,AS STD GN&HC

Graco 245290 Handle for for ProXs Standard 60 kV Manual Electrostatic Gun

GG 245867

GG 245869

GG 245870

GG 245970

GG 245924

GUN, SPRAY, TEXTURE

Double-handle and lightweight design provides maximum support and control for ceiling, wall and floor applications. Sprays acoustics, drywall mud, waterproofing materials, pool-deck sealant, stucco and most gravity-fed materials.

Lightweight Design - Weighs up to 35% less than comparable models to reduce operator fatigue

Angled, 1-1/2 Gallon (5.7 L) Capacity for longer spraying periods before refills

Handles on Both Sides - Rotates 180° for maximum control when spraying ceilings, walls and floors

Comfort Grip allows even distribution of weight for better balance and reduced fatigue

Durable metal trigger with conveniently located trigger adjustment allows fine tuning of fluid output for a precise and consistent finish

Exclusive Hopper Clamp - No tools needed to attach hopper to gun

GG 245971

GG 246011

KIT, REPAIR, 308HP DIAPHRAGM

Graco 246011 Diaphragm Repair Kit- for 308 hp Diaphragm Pumps

GG 246014

GG 246045

REACTOR HEATED HOSE, 50', 1/4", 2000PSI

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246049

REACTOR HEATED HOSE, 2000, W/SCUFF, 3/8, 25'

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 246101

FUSION AP GUN, ROUND 01

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

GG 246053

REACTOR HEATED HOSE, 50', 3/8, 3500PSI W/O S

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

Thermocouple

• Very accurate and reliable way to monitor and maintain temperature

GG 246190

METER, HELI. GEAR AMB W/SENSOR

GG 246081

KIT, COMPLETE, 2:1(AIR/FLUID)

Graco 246081 T2 Complete Package: Includes 2 Pumps (Stainless Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer Kit

Gracos family of transfer pumps maintains performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

• Provide consistent feed pressures and flow rates for dependable results
• Lower pressure drops with higher viscosity materials at any ambient temperature
• Designed and manufactured by the worldwide leader in pump technology
• Quick-release bung adapter for easy drum removal without interference from hose connections
• Stainless steel wetted parts for corrosion-resistance
• PTFE seals for improved performance and less maintenance

• Model: T2

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Compatible Material: Polyurethane Materials

• Cycles Per Gallon: 15.9

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• For Use With: HFR Metering System

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 12.5
• Maximum Air Inlet Pressure (kPa): 1250
• Maximum Air Inlet Pressure (MPa): 1.2
• Maximum Air Inlet Pressure (psi): 180

• Maximum Flow Rate (GPM): 5
• Maximum Flow Rate (L/min): 19

• Maximum Operating Temperature ( degree C): 88
• Maximum Operating Temperature ( degree F): 190

• Maximum Working Pressure (bar): 28
• Maximum Working Pressure (kPa): 2800
• Maximum Working Pressure (MPa): 2.8
• Maximum Working Pressure (psi): 405

• Package Options: Air Supply & Supply Hose

• Pump Ratio: 2.25:1

GG 246254

GG 246104

FUSION AP GUN, ROUND 04

Graco 246104 Round Fusion Air-Purge Gun with 04 Mix Chamber and 0.070 in (1.8 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Applicator Type: Manual

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.178
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.78

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air Purge Gun
• Gun Weight (g): 1130
• Gun Weight (kg): 1.1
• Gun Weight (lb): 2.5
• Gun Weight (oz): 40

• Impingement Port Size (in): 0.070
• Impingement Port Size (mm): 1.75
• Includes: AR7070 Mix Chamber Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 245
• Maximum Fluid Working Pressure (MPa): 24.5
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 04 (.070)

• Overall Height (cm): 20.6
• Overall Height (in): 8.1
• Overall Height (mm): 206
• Overall Length (cm): 19.1
• Overall Length (in): 7.5
• Overall Length (mm): 191
• Ove

GG 246100

FUSION AP GUN, ROUND 00

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

GG 246240

GUN, SILVER

• Durable forged aluminum withstands harsh work environments
• Lighter weight than competitive guns Polished body is easy to clean

• Factory set needle needs no trigger adjustments
• Guaranteed for life against breakage
• Maximum performance and long life

• Fluid flows directly to the tip through the gun fluid tube
• Provides the ability to spray heavier materials
• Including high solid coatings and mastics

• Provides faster shut-off to reduce spitting of light viscosity material
• Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)

GG 246074

REACTOR HEATED HOSE, 50', 1/4, W/O CABLE

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 246348

GG 246102

FUSION AP GUN, ROUND 02

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

GG 246078

GG 246215

GUARD, RAC X

GG 246297

GG 246056

REACTOR HEATED HOSE, 10', 3/8, 3500 PSI

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 246302

GG 246340

GG 246347

GG 246294

GG 246103

FUSION AP GUN, ROUND 03

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

GG 246290

GG 246360

GG 246367

HUSKY PUMP, 716 DRUM W/RISER

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

GG 246361

GG 246368

HUSKY PUMP, 1050 W/RISER

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrak - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 246376

KIT, COMPL., H1050 (AIR/FLUID)

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Benefits of the Husky 1050 Double Diaphragm Pump

• Up to 5 times longer diaphragm life compared to other air-operated diaphragm pumps in its class
• Expanded material offering to handle endless applications
• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation.
• Offered in ATEX configuration.

30% more efficient than the market leader

20% increase in fluid flow compared to the Husky 1050

Up to 5 times longer diaphragm life compared to other double diaphragm pumps in its class

Expanded material offering to handle endless applications

GG 246382

KIT, REPAIR, FILTER, 100 MESH

GG 246384

KIT, REPAIR, FILTER, 60 MESH

GG 246385

KIT, REPAIR, STRAINER

GG 246420

GG 246421

GG 246425

KIT, REPAIR, FILTER, 30 MESH

GG 246428

KIT, REPAIR, PUMP, 021/023

GG 246437

GUARD, RAC X, 11/16"

GG 246429

GG 246453

GASKET, RAC X, 5 PACK

GG 246484

HUSKY PUMP, 515AC-PP01AAC3-2ACBNBNPT

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

GG 246485

HUSKY PUMP, 716A-PP01AA1-4SSSSPTPT

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

GG 246501

GG 246596

KIT,REPAIR, GEARS

KIT INCLUDES: SHAFT, SUB-ASSY, HELICAL GEAR [QTY. 1], SHAFT, SUB-ASSY, HELICAL GEAR [QTY. 1], O-RING, SEAL, HELICAL GEAR METER [QTY. 2], SPACER, SHAFT, GEAR [QTY. 1]

GG 246627

GG 246628

GG 246630

GG 246643

REGULATOR, MASTIC, HEATED

GG 246678

REACTOR HEATED HOSE, 2000PSI, 3/8ID W/SGRD

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 246679

REACTOR HEATED HOSE, 3500PSI, 3/8 W/SCFGRD

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 246687

REGULATOR, MASTIC

GG 246688

GG 246775

FIREBALL 225 PUMP, 3:1, (UNIVERSAL)

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.