GRACO INC. S10595
GRACO INC. S10595 branded products
ROD, TIE, MSP, SS, 4 SECTION
GG 126248
GG 126248
ROD, TIE, MSP, SS, 4 SECTION
Trabon® MSP Stainless Steel Divider Valve - 4 Section Tie Rod (3 Required) For use with Trabon® MSP Stainless Steel Divider Valves. 4-Section Stainless Steel Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-003-300 $21.80
ROD, TIE, MSP, SS, 5 SECTION
GG 126249
GG 126249
ROD, TIE, MSP, SS, 5 SECTION
Trabon® MSP Stainless Steel Divider Valve - 5 Section Tie Rod (3 Required) For use with Trabon® MSP Stainless Steel Divider Valves. 5-Section Stainless Steel Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-003-310 $27.10
ROD, TIE, MSP, SS, 6 SECTION
GG 126250
GG 126250
ROD, TIE, MSP, SS, 6 SECTION
Trabon® MSP Stainless Steel Divider Valve - 6 Section Tie Rod (3 Required) For use with Trabon® MSP Stainless Steel Divider Valves. 6-Section Stainless Steel Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-003-320 $63.25
ROD, TIE, MSP, SS, 7 SECTION
GG 126251
GG 126251
ROD, TIE, MSP, SS, 7 SECTION
Trabon® MSP Stainless Steel Divider Valve - 7 Section Tie Rod (3 Required) For use with Trabon® MSP Stainless Steel Divider Valves. 7-Section Stainless Steel Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-003-330 $84.50
ROD, TIE, MSP, SS, 8 SECTION
GG 126252
GG 126252
ROD, TIE, MSP, SS, 8 SECTION
Trabon® MSP Stainless Steel Divider Valve - 8 Section Tie Rod (3 Required) For use with Trabon® MSP Stainless Steel Divider Valves. 8-Section Stainless Steel Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-003-340 $139.00
Therm-O-Flow Supply Unit, 36:1Hcs, D60-20H, 240V, A
GG WMC21B1
GG WMC21B1
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D60-20H, 240V, A
Graco WMC21B1 36:1 TOFw Check-Mate Severe Duty, Heated, 5 Gal (20L) D60, 5 Gal (20L) Carbon Steel/Aluminum Platen, EPDM, 240V, ADM
Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility.
Application: Bulk unloader for warm applied materials and temperature conditioning applications.- Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C).
- With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices.
- Primary unit with ADM can be configured as a tandem system.
- Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones.
- Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O.
- Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O.
- Model: Therm-O-Flow
- Series: Warm Melt
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Ambient/Warm Melt/Hot Melt: Warm Melt
- Amperage (A): 19
- Container Type: Pail
- Control Options: Advanced Display Module
- Fluid Outlet Size (in): 1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Input Cycle Rate (Hz): 50/60
- Lower Type: Check-Mate MaxLife
- Material Container Volume (gal): 5
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 10
- Maximum Air Inlet Pressure (MPa): 1
- Maximum Air Inlet Pressure (psi): 150
- Maximum Ambient Temperature (°C): 49
- Maximum Ambient Temperature (°F): 120
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Temperature (°C): 70
- Maximum Fluid Temperature (°F): 158
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Temperature (°C): 70
- Maximum Fluid Temperature (°F): 158
- Maximum Height (in): 89
- Maximum Height (mm): 2261
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Voltage (V ac): 240
- Maximum Working Pressure (bar): 240
- Maximum Working Pressure (MPa): 24
- Minimum Ambient Temperature (°C): 0
- Minimum Ambient Temperature (°F): 32
- Minimum Flow Rate (cc/min): 12000
- Minimum Height (in): 70
- Minimum Height (mm): 1778
- Minimum Voltage (V ac): 200
- Number of Wipers: Single Ring
- Overall Depth (in): 20
- Overall Depth (mm): 508
- Overall Width (in): 45
- Overall Width (mm): 1143
- Phase: 1, 3
- Plate Material: Carbon Steel, Aluminum
- Power Type: Pneumatic
- Pump & Plate: Heated
$35,390.00
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D60-20H, 480V, A
GG WMC21B2
GG WMC21B2
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D60-20H, 480V, A
36:1 TOFw Check-Mate Severe Duty, Heated, 5 Gal (20L) D60, 5 Gal (20L) Carbon Steel/Aluminum Platen, EPDM, 480V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $39,140.00
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D60-60H, 240V, A
GG WMC21D1
GG WMC21D1
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D60-60H, 240V, A
36:1 TOFw Check-Mate Severe Duty, Heated, 5 Gal (20L) D60, 16 Gal (60L) Carbon Steel/Aluminum Platen, PTFE Nitrile, 240V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $35,380.00
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D200-200H, 240V, A
GG WMC22G1
GG WMC22G1
THERM-O-FLOW SUPPLY UNIT, 36:1HCS, D200-200H, 240V, A
36:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200, 16 Gal (60L) Platen, Aluminum Platen, EPDM, 240V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $35,980.00
THERM-O-FLOW SUPPLY UNIT, 68:1ACS, D60-20A, 480V, A
GG WMC51A2
GG WMC51A2
THERM-O-FLOW SUPPLY UNIT, 68:1ACS, D60-20A, 480V, A
68:1 TOFw Check-Mate Severe Duty, Ambient, 5 Gal (20L) D60, 5 Gal (20L) Carbon Steel/Aluminum Platen, EPDM, 480V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an ambient pump and platen, you can heat up 4 heated hoses and 4 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 16 heated hoses and 16 heated end of hose devices on a tandem system for a total of 32 heated zones. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $33,560.00
THERM-O-FLOW SUPPLY UNIT, 68:1ACS, D200-200A, 480V, A
GG WMC52F2
GG WMC52F2
THERM-O-FLOW SUPPLY UNIT, 68:1ACS, D200-200A, 480V, A
68:1 TOFw Check-Mate Severe Duty, Ambient, 55 Gal (200L) D200, 16 Gal (60L) Aluminum Platen, EPDM, 480V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an ambient pump and platen, you can heat up 4 heated hoses and 4 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 16 heated hoses and 16 heated end of hose devices on a tandem system for a total of 32 heated zones. Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $32,870.00
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D60-20H, 240V, A
GG WMC61B1
GG WMC61B1
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D60-20H, 240V, A
68:1 TOFw Check-Mate Severe Duty, Heated, 5 Gal (20L) D60, 5 Gal (20L) Carbon Steel/Aluminum Platen, EPDM, 240V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $35,230.00
Therm-O-Flow Supply Unit, 68:1Hcs, D200-200H, 240V, A
GG WMC62G1
GG WMC62G1
THERM-O-FLOW SUPPLY UNIT,68:1HCS,D200-200H,240V,A
Graco WMC62G1 68:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200, 16 Gal (60L) Platen, Aluminum Platen, EPDM, 240V, ADM
Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility.
Application: Bulk unloader for warm applied materials and temperature conditioning applications.- Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C).
- With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices.
- Primary unit with ADM can be configured as a tandem system.
- Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones.
- Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens.
- Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O.
$38,150.00
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200-200H, 480V, A
GG WMC62G2
GG WMC62G2
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200-200H, 480V, A
68:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200, 16 Gal (60L) Platen, Aluminum Platen, EPDM, 480V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $39,480.00
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 240V, A
GG WMC63G1
GG WMC63G1
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 240V, A
68:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200s, 16 Gal (60L) Platen, Aluminum Platen, EPDM, 240V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $42,930.00
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 480V, A
GG WMC63G2
GG WMC63G2
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 480V, A
68:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200s, 16 Gal (60L) Platen, Aluminum Platen, EPDM, 480V, ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Primary unit with ADM can be configured as a tandem system. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Featuring the Graco Advanced Display Module ꟷ an easy-to-use HMI with graphic-based control screens. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $46,100.00
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 240V, N
GG WMC63G3
GG WMC63G3
THERM-O-FLOW SUPPLY UNIT, 68:1HCS, D200S-200H, 240V, N
68:1 TOFw Check-Mate Severe Duty, Heated, 55 Gal (200L) D200s, 55 Gal (200L) Platen, Aluminum Platen, EPDM, 240V, No ADM Designed with more heat zones, the Therm-O-Flow Bulk Warm Melt Supply Pumps deliver superior temperature control and application flexibility. Bulk unloader for warm applied materials and temperature conditioning applications. Designed specifically for sealants or adhesives applications that require a warm applied material for process controls up 158°F (70°C). With an heated pump and platen, you can heat up 3 heated hoses and 3 end of hose devices. Secondary unit for use with a primary unit configured as a tandem system to keep production running while changing containers. Add one zone expansion kit to add 4 heated hoses and 4 end of hose devices or 8 heated accessories per TOFw pump Add a second heat zone expansion kit for up to 14 heated hoses and 14 heated end of hose devices on a tandem system for a total of 32 heated zones. Complete integration possibilities through Ethernet/IP, PROFINET, PROFIBUS and DeviceNet or simple integration through discrete I/O. $42,410.00
RAC X WIDE RAC TIP, SPRAY, 1231
GG WR1231
GG WR1231
RAC X WIDE RAC TIP, SPRAY, 1231
RAC X Wide RAC SwitchTip, 1231 The Reverse-A-Clean (RAC) 1231 RAC X Wide RAC SwitchTip produces a 24 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. RAC X - Wide RAC- The Wide RAC covers double the area in the same time - increased flow rate ensures the proper mil build
- Wide RAC tips are made for high production, new construction applications which may require larger airless sprayers
- Locking tab ensures tip stays securely in guard
- “Snaps” tip in spray or reverse position
- OneSeal tip installs with no tools
- Solvent seal available when using extremely hot solvents
- Large raised tip size numbers are always legible - even when covered with paint
$71.50
RAC X WIDE RAC TIP, SPRAY, 1233
GG WR1233
GG WR1233
RAC X WIDE RAC TIP, SPRAY, 1233
RAC X Wide RAC SwitchTip, 1233 The Reverse-A-Clean (RAC) 1233 RAC X Wide RAC SwitchTip produces a 24 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs. RAC X - Wide RAC- The Wide RAC covers double the area in the same time - increased flow rate ensures the proper mil build
- Wide RAC tips are made for high production, new construction applications which may require larger airless sprayers
- Locking tab ensures tip stays securely in guard
- “Snaps” tip in spray or reverse position
- OneSeal tip installs with no tools
- Solvent seal available when using extremely hot solvents
- Large raised tip size numbers are always legible - even when covered with paint
$71.50
RAC X WIDE RAC TIP, SPRAY, 1237
GG WR1237
GG WR1237
RAC X WIDE RAC TIP, SPRAY, 1237
RAC X Wide RAC SwitchTip, 1237 The Reverse-A-Clean (RAC) 1237 RAC X Wide RAC SwitchTip produces a 24 inch fan and has a 0.037 inch orifice. Reverse the SwitchTip to easily clear clogs. RAC X - Wide RAC- The Wide RAC covers double the area in the same time - increased flow rate ensures the proper mil build
- Wide RAC tips are made for high production, new construction applications which may require larger airless sprayers
- Locking tab ensures tip stays securely in guard
- “Snaps” tip in spray or reverse position
- OneSeal tip installs with no tools
- Solvent seal available when using extremely hot solvents
- Large raised tip size numbers are always legible - even when covered with paint
$71.50
RAC X WIDE RAC TIP, SPRAY, 1239
GG WR1239
GG WR1239
RAC X WIDE RAC TIP, SPRAY, 1239
RAC X Wide RAC SwitchTip, 1239 The Reverse-A-Clean (RAC) 1239 RAC X Wide RAC SwitchTip produces a 24 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs. RAC X - Wide RAC- The Wide RAC covers double the area in the same time - increased flow rate ensures the proper mil build
- Wide RAC tips are made for high production, new construction applications which may require larger airless sprayers
- Locking tab ensures tip stays securely in guard
- “Snaps” tip in spray or reverse position
- OneSeal tip installs with no tools
- Solvent seal available when using extremely hot solvents
- Large raised tip size numbers are always legible - even when covered with paint
$71.50
TIP, SPRAY, WIDE RAC LP(1223)
GG WRLP1223
GG WRLP1223
TIP, SPRAY, WIDE RAC LP(1223)
Low Pressure Wide RAC X LP SwitchTip, 1223 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 1223 Wide Low Pressure (WRLP) RAC X SwitchTip. This low pressure, high production tip produces a 24 - 26 inch fan pattern and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs. For all residential, commercial, interior and exterior high volume applications Largest Industry Spray Pattern- 24 Inch spray pattern
- Deliver 2X more productivity with less spray passes
- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$90.25
TIP, SPRAY, WIDE RAC LP(1225)
GG WRLP1225
GG WRLP1225
TIP, SPRAY, WIDE RAC LP(1225)
Low Pressure Wide RAC X LP SwitchTip, 1225 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 1225 Wide Low Pressure (WRLP) RAC X SwitchTip. This low pressure, high production tip produces a 24 - 26 inch fan pattern and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs. For all residential, commercial, interior and exterior high volume applications Largest Industry Spray Pattern- 24 Inch spray pattern
- Deliver 2X more productivity with less spray passes
- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$90.25
TIP, SPRAY, WIDE RAC LP(1227)
GG WRLP1227
GG WRLP1227
TIP, SPRAY, WIDE RAC LP(1227)
Low Pressure Wide RAC X LP SwitchTip, 1227 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 1227 Wide Low Pressure (WRLP) RAC X SwitchTip. This low pressure, high production tip produces a 24 - 26 inch fan pattern and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs. For all residential, commercial, interior and exterior high volume applications Largest Industry Spray Pattern- 24 Inch spray pattern
- Deliver 2X more productivity with less spray passes
- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$90.25
TIP, SPRAY, WIDE RAC LP(1229)
GG WRLP1229
GG WRLP1229
TIP, SPRAY, WIDE RAC LP(1229)
Low Pressure Wide RAC X LP SwitchTip, 1229 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 1229 Wide Low Pressure (WRLP) RAC X SwitchTip. This low pressure, high production tip produces a 24 - 26 inch fan pattern and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs. For all residential, commercial, interior and exterior high volume applications Largest Industry Spray Pattern- 24 Inch spray pattern
- Deliver 2X more productivity with less spray passes
- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$90.25
TIP, SPRAY, WIDE RAC LP(1231)
GG WRLP1231
GG WRLP1231
TIP, SPRAY, WIDE RAC LP(1231)
Low Pressure Wide RAC X LP SwitchTip, 1231 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 1231 Wide Low Pressure (WRLP) RAC X SwitchTip. This low pressure, high production tip produces a 24 - 26 inch fan pattern and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. For all residential, commercial, interior and exterior high volume applications Largest Industry Spray Pattern- 24 Inch spray pattern
- Deliver 2X more productivity with less spray passes
- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$90.25
XDX SERIES 20 REEL, HOSE
GG XDH55A
GG XDH55A
XDX SERIES 20 REEL, HOSE
XDX™ 20, Grease, 1/2 in (13 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,740.00
XDX SERIES 20 REEL, HOSE
GG XDH55F
GG XDH55F
XDX SERIES 20 REEL, HOSE
XDX™ 20, Grease, 1/2 in (13 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT, Truck/Bench Mount, Yellow Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,720.00
XDX SERIES 20 REEL, HOSE
GG XDH5DD
GG XDH5DD
XDX SERIES 20 REEL, HOSE
XDX™ 20, Grease, 1/2 in (13 mm) Inlet, Bare Reel (3/8 in X 50 ft (10 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,395.00
XDX SERIES 20 REEL, HOSE
GG XDH5DF
GG XDH5DF
XDX SERIES 20 REEL, HOSE
XDX™ 20, Grease, 1/2 in (13 mm) Inlet, Bare Reel (3/8 in X 50 ft (10 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Yellow Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,460.00
XDX SERIES 20 REEL, HOSE
GG XDL56A
GG XDL56A
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 3/8 in X 65 ft (10 mm X 20 m) Hose, NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,465.00
XDX SERIES 20 REEL, HOSE
GG XDL56D
GG XDL56D
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 3/8 in X 65 ft (10 mm X 20 m) Hose, NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,350.00
XDX SERIES 20 REEL, HOSE
GG XDL65A
GG XDL65A
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,465.00
XDX SERIES 20 REEL, HOSE
GG XDL65D
GG XDL65D
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,350.00
XDX SERIES 20 REEL, HOSE
GG XDL65F
GG XDL65F
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, Yellow Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,425.00
XDX SERIES 20 REEL, HOSE
GG XDL6DA
GG XDL6DA
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,215.00
XDX SERIES 20 REEL, HOSE
GG XDL6DB
GG XDL6DB
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,130.00
XDX SERIES 20 REEL, HOSE
GG XDL6DD
GG XDL6DD
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,130.00
XDX SERIES 20 REEL, HOSE
GG XDL6DF
GG XDL6DF
XDX SERIES 20 REEL, HOSE
XDX™ 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Yellow Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,180.00
XDX SERIES 20 REEL, HOSE
GG XDM65A
GG XDM65A
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,500.00
XDX SERIES 20 REEL, HOSE
GG XDM65D
GG XDM65D
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,395.00
XDX SERIES 20 REEL, HOSE
GG XDM6DA
GG XDM6DA
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, White Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,395.00
XDX SERIES 20 REEL, HOSE
GG XDM6DB
GG XDM6DB
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,290.00
XDX SERIES 20 REEL, HOSE
GG XDM6DD
GG XDM6DD
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Black Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,290.00
XDX SERIES 20 REEL, HOSE
GG XDM6DF
GG XDM6DF
XDX SERIES 20 REEL, HOSE
XDX™ 20, Oil, 1/2 in (13 mm) Inlet, Bare Reel (1/2 in X 50 ft (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Yellow Graco’s heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame; steel spool; sealed components and innovative swivel design for high-quality performance in the most demanding applications. Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications $1,350.00