GRACO INC. S10595
GRACO INC. S10595 branded products
FF FLAT TIP, SPRAY TC
GG 163820
GG 163820
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 820 The 820 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.020 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163822
GG 163822
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 822 The 822 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.022 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163825
GG 163825
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 825 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 825 Silver Flat Tip has a 0.025 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163826
GG 163826
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 826 The 826 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.026 inch orifice. $66.00
Silver Flat Tip, Spray TC
GG 163827
GG 163827
SILVER FLAT TIP, SPRAY TC
Graco 163827 Silver Flat Tip, 827
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 827 Silver Flat Tip has a 0.027 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 0.78
- Maximum Flow Rate (L/min): 2.95
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.027
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163829
GG 163829
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 829 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 829 Silver Flat Tip has a 0.029 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163831
GG 163831
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 831 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 831 Silver Flat Tip has a 0.031 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163841
GG 163841
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 841 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 841 Silver Flat Tip has a 0.041 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163845
GG 163845
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 845Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 845 Silver Flat Tip has a 0.045 inch orifice and produces a 16 to 18 inch (41-45 cm) fan.
Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163847
GG 163847
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 847 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 847 Silver Flat Tip has a 0.047 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163849
GG 163849
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 849 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 849 Silver Flat Tip has a 0.049 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163861
GG 163861
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 861 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 861 Silver Flat Tip has a 0.061 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
TIP, SPRAY, TC
GG 163865
GG 163865
TIP, SPRAY, TC
Silver Flat Tip, 865 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 865 Silver Flat Tip has a 0.065 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray, Tc
GG 163871
GG 163871
SILVER FLAT TIP, SPRAY, TC
Graco 163871 Silver Flat Tip, 871
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 871 Silver Flat Tip has a 0.071 inch orifice and produces a 16 to 18 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 5.41
- Maximum Flow Rate (L/min): 20.48
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.071
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$54.25
Ff Flat Tip, Spray Tc
GG 163924
GG 163924
FF FLAT TIP, SPRAY TC
Graco 163924 Fine Finish Flat Tip, 924
The 924 Fine Finish Flat Tip produces an 18 to 20 inch (46 to 51 cm) fan pattern and a 0.024 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 50.8
- Maximum Fan Width (in): 18
- Maximum Fan Width (mm): 508
- Maximum Flow Rate (GPM): 0.62
- Maximum Flow Rate (L/min): 2.35
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 18
- Minimum Fan Width (mm): 457
- Orifice Diameter (in): 0.024
- Pattern Size (in): 18 to 20
- Pattern Size (mm): 457.2 to 508
$66.00