GRACO INC. S10595
GRACO INC. S10595 branded products
Lsr Hose, Assembly, 3/4X21.5, Ss, Brd, Wht
GG 16U585
GG 16U585
Lsr Hose, Assy, 3/4X21.5, Ss, Brd, Wht $695.00
SILVER FLAT TIP, SPRAY TC
GG 163451
GG 163451
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 451 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 451 Silver Flat Tip has a 0.051 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163455
GG 163455
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 455 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 455 Silver Flat Tip has a 0.055 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163459
GG 163459
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 459 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 459 Silver Flat Tip has a 0.059 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163461
GG 163461
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 461 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 461 Silver Flat Tip has a 0.061 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163463
GG 163463
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 463 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 463 Silver Flat Tip has a 0.063 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163465
GG 163465
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 465 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 465 Silver Flat Tip has a 0.065 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163471
GG 163471
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 471 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 471 Silver Flat Tip has a 0.071 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163477
GG 163477
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 477 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 477 Silver Flat Tip has a 0.077 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163509
GG 163509
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 509 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 509 Silver Flat Tip has a 0.009 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163510
GG 163510
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 510 The 510 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.010 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163512
GG 163512
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 512 The 512 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.012 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163513
GG 163513
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 513 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 513 Silver Flat Tip has a 0.013 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163518
GG 163518
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 518 The 518 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.018 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163520
GG 163520
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 520 The 520 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.020 inch orifice. $66.00
Ff Flat Tip, Spray Tc
GG 163522
GG 163522
FF FLAT TIP, SPRAY TC
Graco 163522 Fine Finish Flat Tip, 522
The 522 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.022 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.52
- Maximum Flow Rate (L/min): 1.97
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.022
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$66.00
SILVER FLAT TIP, SPRAY TC
GG 163529
GG 163529
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 529 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 529 Silver Flat Tip has a 0.029 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163531
GG 163531
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 531 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 531 Silver Flat Tip has a 0.031 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163539
GG 163539
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 539 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 539 Silver Flat Tip has a 0.039 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163541
GG 163541
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 541 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 541 Silver Flat Tip has a 0.041 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163543
GG 163543
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 543 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 543 Silver Flat Tip has a 0.043 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163545
GG 163545
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 545 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 545 Silver Flat Tip has a 0.045 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163547
GG 163547
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 547 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 547 Silver Flat Tip has a 0.047 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163551
GG 163551
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 551 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 551 Silver Flat Tip has a 0.051 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163555
GG 163555
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 555 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 555 Silver Flat Tip has a 0.055 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163557
GG 163557
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 557 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 557 Silver Flat Tip has a 0.057 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163561
GG 163561
SILVER FLAT TIP, SPRAY TC
Graco 163561 Silver Flat Tip, 561
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 561 Silver Flat Tip has a 0.061 inch orifice and produces a 10 to 12 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 25
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 3.99
- Maximum Flow Rate (L/min): 15.1
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.061
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163563
GG 163563
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 563 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 563 Silver Flat Tip has a 0.063 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163571
GG 163571
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 571 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 571 Silver Flat Tip has a 0.071 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163616
GG 163616
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 616 The 616 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.016 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163631
GG 163631
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 631 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 631 Silver Flat Tip has a 0.031 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163637
GG 163637
SILVER FLAT TIP, SPRAY TC
Graco 163637 Silver Flat Tip, 637
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 637 Silver Flat Tip has a 0.037 inch orifice and produces a 12 to 14 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 1.47
- Maximum Flow Rate (L/min): 5.56
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.037
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163639
GG 163639
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 639 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 639 Silver Flat Tip has a 0.039 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163641
GG 163641
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 641 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 641 Silver Flat Tip has a 0.041 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163643
GG 163643
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 643 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 643 Silver Flat Tip has a 0.043 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163645
GG 163645
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 645 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 645 Silver Flat Tip has a 0.045 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163647
GG 163647
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 647 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 647 Silver Flat Tip has a 0.047 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163651
GG 163651
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 651 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 651 Silver Flat Tip has a 0.051 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163657
GG 163657
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 657 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 657 Silver Flat Tip has a 0.057 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163661
GG 163661
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 661 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 661 Silver Flat Tip has a 0.061 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163663
GG 163663
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 663 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 663 Silver Flat Tip has a 0.063 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163665
GG 163665
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 665 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 665 Silver Flat Tip has a 0.065 inch orifice and produces a 12 to 14 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163667
GG 163667
SILVER FLAT TIP, SPRAY TC
Graco 163667 Silver Flat Tip, 667
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 667 Silver Flat Tip has a 0.067 inch orifice and produces a 12 to 14 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 4.82
- Maximum Flow Rate (L/min): 18.25
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.067
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$54.25
FF FLAT TIP, SPRAY TC
GG 163718
GG 163718
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 718 The 718 Fine Finish Flat Tip produces a 14 to 16 inch fan pattern and a 0.018 inch orifice. $148.00
SILVER FLAT TIP, SPRAY TC
GG 163717
GG 163717
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 717 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 717 Silver Flat Tip has a 0.017 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163729
GG 163729
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 729 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 729 Silver Flat Tip has a 0.029 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163737
GG 163737
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 737 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 737 Silver Flat Tip has a 0.037 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163757
GG 163757
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 757 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 757 Silver Flat Tip has a 0.057 inch orifice and produces a 14 to 16 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163813
GG 163813
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 813 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 813 Silver Flat Tip has a 0.013 inch orifice and produces a 16 to 18 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163814
GG 163814
SILVER FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 814 The 814 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.014 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163816
GG 163816
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 816 The 816 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.016 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163818
GG 163818
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 818 The 818 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.018 inch orifice. $66.00