GRACO INC. S10595
GRACO INC. S10595 branded products
T-MAX SPRAYER, 6912, AA/STX/120V/30
GG 17Z284
GG 17Z284
T-MAX SPRAYER, 6912, AA/STX/120V/30
TexSpray T-MAX 6912 Electric Texture Sprayer, STX Gun, 100 ft (30.5 m) Hose The Graco T-MAX 6912 provides the capability and performance to spray almost all interior and exterior texture applications – whether you're spraying smooth compounds for interior skim coats and decorative finishes or aggregate-based materials for exterior jobs. Superior versatility to spray nearly all your texture applications & materials with even material flow and minimal pack-out. Airless spraying to easily apply skimcoats and decorative finishes. Air-Assisted spraying to spray heavy aggregates up to 2mm (separate air compressor required). 120V MaxPower DC Motor- Use with standard 15/20 amp circuits
- No-maintenance, brushless design keeps debris out
- Lifetime Guaranteed Drivetrain
- Delivers smooth, consistent material flow
- Provides Airless or Flow mode
- LED Display shows pressure, gallons, and more
- Steel construction withstands jobsite abuse
- Easy, no-tools connect and disconnect
- Small, compact and balanced design for easy maneuvering – even when full
- Locking front swivel caster wheel
- 6 Bags
- 25 Gallons (90 Liters) for less refilling
- Steep-sided design keeps material flowing
- Sequential shut-off stops pump first, then air, for less pack-out
- Forgiving soft start operation eliminates material bursts to deliver smooth finishes
- Perfect for decorative finishes with smooth or aggregate materials up to 2 mm
- Lasts 2X longer than competing pumps
- 1000 psi (69 bar) and 3.2 gpm (12 lpm)
- Quick-Access design: access any part of the pump in seconds without tools, even with a full hopper of material
- The longest lasting drive
- Improved jobsite conditions with extremely quiet operation
- Lifetime Warranty
- Flexible hose sets available in various lengths
- Choose between Inline Lance for airless application, or STX and Pole applicators for air-assisted decorative finishes
$20,030.00
KIT, PUMP, 4B, ULTRALIFE, 2500CC
GG 17Z387
GG 17Z387
KIT, PUMP, 4B, ULTRALIFE, 2500CC
Sealed 4-Ball Plus Lower, 2500cc, Ultralife Cylinders Graco’s Sealed 4-Ball Plus Lower has the industry's highest fluid delivery at the lowest cycle rates. Use this durable, maintenance-free lower to power existing or new electric, hydraulic or pneumatic pumps. Ultralife coating on lower rods and cylinders means a smoother finish, better wear and longer seal life for most applications. Connection kits contain tie rods and adapters – everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.
$25,660.00
KIT, PUMP, 4B, ULTRALIFE, 3000CC
GG 17Z388
GG 17Z388
KIT, PUMP, 4B, ULTRALIFE, 3000CC
Sealed 4-Ball Plus Lower, 3000cc, Ultralife Cylinders Graco’s Sealed 4-Ball Plus Lower has the industry's highest fluid delivery at the lowest cycle rates. Use this durable, maintenance-free lower to power existing or new electric, hydraulic or pneumatic pumps. Ultralife coating on lower rods and cylinders means a smoother finish, better wear and longer seal life for most applications. Connection kits contain tie rods and adapters – everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.
$25,150.00
KIT, PUMP, 4B, ULTRALIFE, 4000CC
GG 17Z389
GG 17Z389
KIT, PUMP, 4B, ULTRALIFE, 4000CC
Sealed 4-Ball Plus Lower, 4000cc, Ultralife Cylinders Graco’s Sealed 4-Ball Plus Lower has the industry's highest fluid delivery at the lowest cycle rates. Use this durable, maintenance-free lower to power existing or new electric, hydraulic or pneumatic pumps. Ultralife coating on lower rods and cylinders means a smoother finish, better wear and longer seal life for most applications. Connection kits contain tie rods and adapters – everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.
$26,530.00
Kit, Pump, 4B, Chrome, 2500cc
GG 17Z390
GG 17Z390
KIT, PUMP, 4B, CHROME, 2500CC
Graco 17Z390 Sealed 4-Ball Plus Lower, 2500cc, Chrome Cylinders
Graco’s Sealed 4-Ball Plus Lower has the industry's highest fluid delivery at the lowest cycle rates. Use this durable, maintenance-free lower to power existing or new electric, hydraulic or pneumatic pumps.
- Chrome coating on lower rods and cylinders works well for fine pigment paint and fluids with low lubrication, such as solvents and water.
- Connection kits contain tie rods and adapters – everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.
- Fluid Inlet Size (cm): 3.81
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: Tri-Clamp
- Fluid Outlet Size (in): 1.5
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: Tri-Clamp
- Maximum Flow Rate (GPM): 8
- Maximum Operating Temperature (°F): 150
- Maximum Output (cm³): 30000
- Maximum Pump Speed (CPM): 12
- Maximum Working Pressure (psi): 400
$24,120.00
KIT, PUMP, 4B, CHROME, 3000CC
GG 17Z391
GG 17Z391
KIT, PUMP, 4B, CHROME, 3000CC
Sealed 4-Ball Plus Lower, 3000cc, Chrome Cylinders Graco’s Sealed 4-Ball Plus Lower has the industry's highest fluid delivery at the lowest cycle rates. Use this durable, maintenance-free lower to power existing or new electric, hydraulic or pneumatic pumps. Chrome coating on lower rods and cylinders works well for fine pigment paint and fluids with low lubrication, such as solvents and water. Connection kits contain tie rods and adapters – everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.
$24,880.00
KIT, ACCESSORY, SPRAY TIP
GG 17A223
GG 17A223
KIT, ACCESSORY, SPRAY TIP
TrueCoat 360 Spray Tips Ensure the best quality finish for your small to medium size projects with these high precision TrueCoat 360 spray tips. Includes 2 tips, one with a wide spray fan and one with a narrow spray fan.
$24.50
Circuit, Breaker, 2P, 10A, Ul489, Ab
GG 17A311
GG 17A311
Circuit, Breaker, 2P, 10A, Ul489, Ab
$264.50
Circuit, Breaker, 2P, 15A, Ul489, Ab
GG 17A313
GG 17A313
Circuit, Breaker, 2P, 15A, Ul489, Ab
$264.50
Circuit, Breaker, 2P, 20A, Ul489, Ab
GG 17A314
GG 17A314
Circuit, Breaker, 2P, 20A, Ul489, Ab
$264.50
Circuit, Breaker, 2P, 25A, Ul489, Ab
GG 17A315
GG 17A315
Circuit, Breaker, 2P, 25A, Ul489, Ab
$264.50
Circuit, Breaker, 2P, 30A, Ul489, Ab
GG 17A316
GG 17A316
Circuit, Breaker, 2P, 30A, Ul489, Ab
$264.50
Circuit, Breaker, 2P, 40A, Ul489, Ab
GG 17A317
GG 17A317
Circuit, Breaker, 2P, 40A, Ul489, Ab
$264.50
Thermolazer Sprayer, 200Tc, 2in Flexdie
GG 17A332
GG 17A332
Thermolazer Sprayer, 200Tc, 2In Flexdie
$13,020.00
Thermolazer Sprayer, 200Tc, 3in Flexdie
GG 17A333
GG 17A333
Thermolazer Sprayer, 200Tc, 3In Flexdie
Call for pricing
Thermolazer Sprayer, 200Tc, 5in Flexdie
GG 17A334
GG 17A334
THERMOLAZER SPRAYER, 200TC, 5" FLEXDIE
Graco 17A334 ThermoLazer 200TC Thermoplastic Striping System, 5 in FlexDie
The ThermoLazer 200TC is the premiere solution for smaller thermoplastic striping jobs. The FlexDie is built with the same precision and functionality as its big brother, the SmartDie II. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC is ideal for striping contractors who already have premelt kettle systems.- FlexDie
- Delivers excellent line quality with exclusive deep-die, all steel construction and a no-tools change out design
- 200 lb Material Kettle
- Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colors fast
- 40 lb Bead Hopper
- Perfectly matched to the material kettle with a superior flow design
- Tri-Wheel System
- Dual solid front and single solid rear wheels provide smooth, quiet operation
- Adjustable Operator Handle
- Handle easily adjusts to multiple heights
- Adjustable Front Pointer
- Easily adjusts for all size dies for following all marks and creating straight lines
- Model: ThermoLazer
- Series: 200TC
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 5 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$13,180.00
Thermolazer Sprayer, 200Tc, 7in Flexdie
GG 17A336
GG 17A336
Thermolazer Sprayer, 200Tc, 7In Flexdie
$13,300.00
Thermolazer Sprayer, 200Tc, 8in Flexdie
GG 17A337
GG 17A337
THERMOLAZER SPRAYER, 200TC, 8" FLEXDIE
Graco 17A337 ThermoLazer 200TC Thermoplastic Striping System, 8 in FlexDie
The ThermoLazer 200TC is the premiere solution for smaller thermoplastic striping jobs. The FlexDie is built with the same precision and functionality as its big brother, the SmartDie II. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC is ideal for striping contractors who already have premelt kettle systems.- FlexDie
- Delivers excellent line quality with exclusive deep-die, all steel construction and a no-tools change out design
- 200 lb Material Kettle
- Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colors fast
- 40 lb Bead Hopper
- Perfectly matched to the material kettle with a superior flow design
- Tri-Wheel System
- Dual solid front and single solid rear wheels provide smooth, quiet operation
- Adjustable Operator Handle
- Handle easily adjusts to multiple heights
- Adjustable Front Pointer
- Easily adjusts for all size dies for following all marks and creating straight lines
- Model: ThermoLazer
- Series: 200TC
- Bead System: Gravity Bead System
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 8 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$13,360.00
Thermolazer Sprayer, 200Tc, 9in Flexdie
GG 17A338
GG 17A338
Thermolazer Sprayer, 200Tc, 9In Flexdie
$13,450.00
Thermolazer Sprayer, 200Tc, 10in Flexdie
GG 17A339
GG 17A339
THERMOLAZER SPRAYER, 200TC, 10" FLEXDIE
Graco 17A339 ThermoLazer 200TC Thermoplastic Striping System, 10 in FlexDie
Graco changed the world of thermoplastic striping with ThermoLazer, and we've done it again with the ThermoLazer 200TC. The premiere solution for smaller thermoplastic striping jobs. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC is ideal for striping contractors who already have premelt kettle systems.- 200 lb Material Kettle
- Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colors fast
- Model: ThermoLazer
- Series: 200TC
- Bead System: Gravity Bead System
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 10 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$13,560.00
Thermolazer Sprayer, 200Tc, 12in Flexdie
GG 17A340
GG 17A340
THERMOLAZER SPRAYER, 200TC, 12" FLEXDIE
Graco 17A340 ThermoLazer 200TC Thermoplastic Striping System, 12 in FlexDie
Graco changed the world of thermoplastic striping with ThermoLazer, and we've done it again with the ThermoLazer 200TC. The premiere solution for smaller thermoplastic striping jobs. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC is ideal for striping contractors who already have premelt kettle systems.Feature-Packed Kettle
200 lb Material Kettle- Drum-style kettle is easy to fill
- Corkscrew agitation aids in mixing material and improves melt times
- No-tool change out design lets you switch colors in the field
Smooth Handling
Tri-Wheel System- Rear swivel wheel and dual-fixed wheels allow for easy maneuvering
Great Lines Every Time
FlexDie- Delivers excellent line quality with deep-die, all steel construction and built-in adjustability
- Direct flames keep die ready
- Easily adjust to match dies for following marks and creating straight lines
- Model: ThermoLazer
- Series: 200TC
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 12 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$13,700.00
Thermolazer Sprayer, 200Tc, 3-3-3 Dbl Flexdie
GG 17A341
GG 17A341
Thermolazer Sprayer, 200Tc, 3-3-3 Dbl Flexdie
Call for pricing
Thermolazer Sprayer, 200Tc, 4-3-4 Dbl Flexdie
GG 17A342
GG 17A342
Thermolazer Sprayer, 200Tc, 4-3-4 Dbl Flexdie
$14,400.00
Thermolazer Sprayer, 200Tc, 4-4-4 Dbl Flexdie
GG 17A344
GG 17A344
THERMOLAZER SPRAYER, 200TC, 4-4-4 DBL FLEXDIE
Graco 17A344 ThermoLazer 200TC Thermoplastic Striping System, 4-4-4 in FlexDie
Graco changed the world of thermoplastic striping with the ThermoLazer Striping System, and we've done it again with the new ThermoLazer 200TC. The premiere solution for smaller thermoplastic striping jobs. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC (200 lb) is ideal for striping contractors who already have premelt kettle systems. The FlexDie is built with the same precision and functionality as its big brother, the SmartDie II.- 200 lb Material Kettle
- Drum-style kettle is easy to fill
- Corkscrew agitation aids in mixing material and improves melt times
- No-tool change out design lets you switch colors in the field
- Tri-Wheel System
- Rear swivel wheel and dual-fixed wheels allow for easy maneuvering
- FlexDie
- Delivers excellent line quality with deep-die, all steel construction and built-in adjustability
- Direct flames keep die ready
- Bead Dispenser
- 8.5 or 12.5 in dispenser with toolless adjustments for line width and drop rate
- Optional Double Drop Conversion Kit
- Model: ThermoLazer
- Series: 200TC
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 4 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$14,400.00