GRACO INC. S10595

GG SK702

Kit, Convert, Sn712-2A, -8A, To1A

GG SK729

Kit, Convert, Sn713-1A, 2A, To4A

GG SK-9500R-INT

Kit, Repair, Solenoid

GG SM314-48-HP

Mixer, Assy, 1/2X48El, 7/8-14

GG SM334007

Cap, End, Mixer, 1/4Npt, Out

GG SM300001

Housing, Mixer, 1InX20El, 19.31Lg

GG SK599-1A

Block, Barrel Stack, 2Pass, 24-El,

GG SM336-15-M

Mixer, 3P, 15, Nocolor

GG SN711011

Jacket, Water

GG SM396004

Cap, 2Pass, Mixer, Top, Sm396-324

GG SN711K

Seal Kit, Nozzle

GG SM396002

Cap, 2Pass, Mixer, Bot, Sm396-322

GG SM370003

Housing, 2Pass, Mixer, Sm370-24

GG SN700024

Seal Retainer

GG SM396003

Rod, Tie, Sm396-322, 324

GG SN712001B

Nozzle, Body, 1/2InRballnose, 125

GG SM370002

Cap, 2Pass, Mixer, Bot, Sm370-24

GG SN712001A

Nozzle, Body, 1/2InRballnose, 094

GG SM370001

Cap, 2Pass, Mixer, Top, Sm370-24

GG SN712010A

Nozzle, Body, Ballnose, 094, Xlg

GG SN712011

Pin, Nozzle, Xlength

GG SN712026

Seal, 25Mmdiving

GG SN712-1A-078-520

Nozzle, Assy, 712, 1/2InBallnose, 078, Std, 520

GG SN712-1A-078

Nozzle, Assy, 1/2InBallnose, 078, Std

GG SN712-10AK

Kit, Seals, Sn712-10A, 11A

GG SN712-1A-078-654

Nozzle, Assy, 712, 1/2InBallnose, 078, Std, 654

GG SN712-12A-125-520

Nozzle, Assy, 712, 2Pc, 15Mm Div, 125, Shr, 52

GG SN712-1A-078-623

Nozzle, Assy, 712, 1/2InBallnose, 078, Std, 623

GG SN712-1A-078-690

Nozzle, Assy, 712, 1/2InBallnose, 078, Std, 690

GG SN712025

Frp Tip, Nozzle, 25Mmdiving, 147

GG SN712-8A-125-475

Nozzle, Assy, 712, 2Pc, 15Mm Div, 125, Std, 475

GG SN712-4A-125-572

Nozzle, Assy, 712, 1/2InBallnose, 125, Xlg, 572

GG SN712-1A-125

Nozzle, Assy, 1/2InBallnose, 125, Std

GG SN712-4A-125-654

Nozzle, Assy, 712, 1/2InBallnose, 125, Xlg, 654

GG SN712-8A-125

Nozzle, Assy, 2Pc, 15Mm Div, 125, Std

GG SN712-6A-125-497

Nozzle, Assy, 712, 1/2InBallnose, 125, Shr, 497

GG SN712-6A-078-520

Nozzle, Assy, 712, 1/2InBallnose, 078, Shr, 520

GG SN712-6A-078-603

Nozzle, Assy, 712, 1/2InBallnose, 078, Shr, 603

GG SN712-8A-125-479

Nozzle, Assy, 712, 2Pc, 15Mm Div, 125, Std, 479

GG SN712-8A-125-520

Nozzle, Assy, 712, 2Pc, 15Mm Div, 125, Std, 520

GG SN712-6A-078

Nozzle, Assy, 1/2InBallnose, 078, Shr

GG SN712-8A-125-572

Nozzle, Assy, 712, 2Pc, 15Mm Div, 125, Std, 572

GG SN712-5AK

Kit, Seals, Sn712-5A

GG SN713011

Jacket, Water, Xlg

GG SN713010

Nozzle, Body, Ballnose, Xlg

GG SN713003

Needle, Nozzlepin, 6.65Lg

GG SN713016

Needle, Nozzlepin, Std

GG SN713038

Jacket, Water, 10Mmballnose, Std

GG SN713-12A-109

Nozzle, Assy, 2Pc, 15Mm Div, 109, Shr

GG SN713030

Needle, Nozzlepin

GG SN713037

Nozzle, Body, 10Mmballnose

GG SN713018

Frp Tip, Nozzle, 15Mmdiving

GG SN713-12A-109-698

Nozzle, Assy, 713, 2Pc, 15Mm Div, 109, Shr, 698

GG SN713-1A-078-638

Nozzle, Assy, 713, 1/2InBallnose, 078, Std, 638

GG SN713-14A-109-638

Nozzle, Assy, 713, 2Pc, 20Mm Div, 109, Shr, 638

GG SN713-1A-078-722

Nozzle, Assy, 1/2InBallnose, 078, Std

GG SN713-1A-078-699

Nozzle, Assy, 713, 1/2InBallnose, 078, Std, 699

GG SN713-12A-109-703

Nozzle, Assy, 713, 2Pc, 15Mm Div, 109, Shr, 703

GG SN713-1A-078-698

Nozzle, Assy, 713, 1/2InBallnose, 078, Std, 698

GG SN713-1A-078-703

Nozzle, Assy, 713, 1/2InBallnose, 078, Std, 703

GG SN713-1A-078-670

Nozzle, Assy, 713, 1/2InBallnose, 078, Std, 670

GG TE30-0477

QUANTM PUMP, QTC-ALFC4ALPTPOPTA200

QUANTM i30, 1"BSPT, Aluminum Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, AL Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Aluminum fluid section with BSPT end port
• Internal components include Aluminum seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring

GG TE30-0478

Quantm Pump, Qtc-Ssfc4Sabnbnpts200

GG TE30-0460

QUANTM PUMP, QTC-ALFC4ALSPSPPTA200

QUANTM i30, 1"BSPT, Aluminum Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, AL Seat, SP Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Aluminum fluid section with BSPT end port
• Internal components include Aluminum seat, Santoprene ball, Santoprene diaphragm and PTFE manifold o-ring

GG TE30-0462

Quantm Pump, Qtc-Alfc4Ppspsppta200

GG TE30-0463

Quantm Pump, Qtc-Alfc4Albnbnpta100

GG TE30-0475

Quantm Pump, Qtc-Alfc4Safkfkpta200

GG TE30-0469

Quantm Pump, Qtc-Alfc4Sabnbnpta100

GG TE30-0471

Quantm Pump, Qtc-Alfc4Ppptpopta100

GG TE30-0461

Quantm Pump, Qtc-Alfc4Acacpopta200

GG TE30-0470

Quantm Pump, Qtc-Alfc4Sasdfkpta100

GG TE30-0480

Quantm Pump, Qtc-Alfc4Saspsppta100

GG TE30-0481

Quantm Pump, Qtc-Alfc4Gecrcopta100

GG TE30-0488

Quantm Pump, Qtc-Alfc4Gegesppta100

GG TE30-0487

Quantm Pump, Qtc-Alfc4Algegepta200

GG TE30-0486

Quantm Pump, Qtc-Ssfc4Saspsppts100

GG TE30-0485

Quantm Pump, Qtc-Alfc4Sapttppta100

GG TE30-0479

Quantm Pump, Qtc-Ssfc4Bnbnbn--S100

GG TE30-0484

Quantm Pump, Qtc-Alfc4Sagegepta200

GG TE30-0483

QUANTM PUMP, QTC-SSFC4ACPTPSPTS100

QUANTM i30, 1"NPT, Stainless Steel Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, AC Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Stainless steel fluid section with NPT end port
• Internal components include acetal seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring

GG TE30-0482

QUANTM PUMP, QTC-ALFC4SASDPOPTA200

QUANTM i30, 1"BSPT, Aluminum Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, SS Seat, SS Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Aluminum fluid section with BSPT end port
• Internal components include 316 stainless steel seat, 316 stainless steel ball, PTFE overmold diaphragm and PTFE manifold o-ring

GG TE30-0489

Quantm Pump, Qtc-Alfc4Tpbntp--A100

GG TE30-0490

Quantm Pump, Qtc-Ssfc4Sasdsppts100

GG TE30-0495

Quantm Pump, Qtc-Alfc4Sasdsppta200

GG TE30-0494

Quantm Pump, Qtc-Ssfc4Safkfkpts200

GG TE30-0493

Quantm Pump, Qtc-Alfc4Tpsdtp--A100

GG TE30-0492

Quantm Pump, Qtc-Alfc4Saspsppta200

GG TE30-0491

QUANTM PUMP, QTC-ALFC4ACPTPOPTA100

QUANTM i30, 1"NPT, Aluminum Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, AC Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Aluminum fluid section with NPT end port
• Internal components include acetal seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring

GG TE30-0496

Quantm Pump, Qtc-Alfc4Ppacbnpta100

GG TE30-0497

Quantm Pump, Qtc-Alfc4Sapttppta200

GG TE30-0500

Quantm Pump, Qtc-Alfc4Acactppta200

GG TE30-0499

Quantm Pump, Qtc-Alfc4Ppptpopta200

GG TE30-0502

QUANTM PUMP, QTC-SSFC4PPPTPSPTS200

QUANTM i30, 1"BSPT, Stainless Steel Electric Diaphragm Pump, 240 VAC 1Ph, AL Center, PP Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• Powder-coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft flying leads
• ATEX Ex II 2 G EX dh IIB T4 Gb hazardous location approval

Materials of Construction

• Stainless steel fluid section with BSPT end port
• Internal components include Polypropylene seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring

GG TE30-0501

Quantm Pump, Qtc-Ssfc4Saptpspts5100

GG TE30-0503

Quantm Pump, Qtc-Alfc4Sasdgepta100

GG TE30-0504

Quantm Pump, Qtc-Alfc4Acacpopta100

GG TE30-0506

Quantm Pump, Qtc-Ssfc4Gegegepts200

GG TE30-0505

Quantm Pump, Qtc-Ssfc4Safkfkpts100

GG TE30-0507

Quantm Pump, Qtc-Ssfc4Sabnbnpts100

GG TE30-0508

Quantm Pump, Qtc-Ssfc4Sasdfkpts100