GRACO INC. S10595
GRACO INC. S10595 branded products
SILVER FLAT TIP, SPRAY TC
GG 163341
GG 163341
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 341 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 341 Silver Flat Tip has a 0.041 inch orifice and produces a 6 to 8 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163351
GG 163351
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 351 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 351 Silver Flat Tip has a 0.051 inch orifice and produces a 6 to 8 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163357
GG 163357
SILVER FLAT TIP, SPRAY TC
Graco 163357 Silver Flat Tip, 357
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 357 Silver Flat Tip has a 0.057 inch orifice and produces a 6 to 8 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 15
- Maximum Fan Width (in): 6
- Maximum Fan Width (mm): 203
- Maximum Flow Rate (GPM): 3.49
- Maximum Flow Rate (L/min): 13.21
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 6
- Minimum Fan Width (mm): 152
- Orifice Diameter (in): 0.057
- Pattern Size (in): 6 to 8
- Pattern Size (mm): 152.4 to 203.2
$54.25
FF FLAT TIP, SPRAY TC
GG 163410
GG 163410
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 410 The 410 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.010 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163421
GG 163421
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 421 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 421 Silver Flat Tip has a 0.021 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163423
GG 163423
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 423 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 423 Silver Flat Tip has a 0.023 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163425
GG 163425
Silver Flat Tip, Spray TC
Silver Flat Tip, 425 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 425 Silver Flat Tip has a 0.025 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163427
GG 163427
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 427 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 427 Silver Flat Tip has a 0.027 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163429
GG 163429
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 429 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 429 Silver Flat Tip has a 0.029 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163431
GG 163431
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 431 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 431 Silver Flat Tip has a 0.031 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray, Tc
GG 163432
GG 163432
SILVER FLAT TIP, SPRAY, TC
Graco 163432 Fine Finish Flat Tip, 432
The 432 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.032 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 25.4
- Maximum Fan Width (in): 8
- Maximum Fan Width (mm): 254
- Maximum Flow Rate (GPM): 1.10
- Maximum Flow Rate (L/min): 4.16
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 8
- Minimum Fan Width (mm): 203
- Orifice Diameter (in): 0.032
- Pattern Size (in): 8 to 10
- Pattern Size (mm): 203.2 to 254
$105.00
SILVER FLAT TIP, SPRAY TC
GG 163433
GG 163433
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 433 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 433 Silver Flat Tip has a 0.033 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163435
GG 163435
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 435 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 435 Silver Flat Tip has a 0.035 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163439
GG 163439
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 439 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 439 Silver Flat Tip has a 0.039 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163441
GG 163441
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 441 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 441 Silver Flat Tip has a 0.041 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163443
GG 163443
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 443 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 443 Silver Flat Tip has a 0.043 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163445
GG 163445
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 445 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 445 Silver Flat Tip has a 0.045 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163449
GG 163449
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 449 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 449 Silver Flat Tip has a 0.049 inch orifice and produces a 8 to 10 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Connector, 1-3/8in Eye, Dia, Carabiner
GG 16H068
GG 16H068
Connector, 1-3/8In Eye, Dia, Carabiner $52.50
Label, Brand, Thermolazer Promelt Front
GG 16H076
GG 16H076
Label, Brand, Thermolazer Promelt Front $21.50
Roadlazer Hose, 3/16in Low Perm, 15.0 inches
GG 16H081
GG 16H081
Roadlazer Hose, 3/16In Low Perm, 15.0 Inches $30.60