Search
GRACO INC. S10595
GRACO INC. S10595 branded products
Seat
GG 191914
GG 191914
SEAT, VALVE
Graco 191914 Seat Valve for Cartidge Repair Kit for Stainless Steel Waterbase-Compatible, High Pressure Fluid Pressure Regulators
$83.50
Fluid Nozzle 1.2mm .047in
GG 197265
GG 197265
NOZZLE, MACHINED,1.2 MM
Graco 197265 PRO Xs Gun Fluid Nozzle, 1.2 mm Orifice Size
$239.00
Fluid Nozzle, 1.5mm (.055In)
GG 197266
GG 197266
NOZZLE, FLUID,MACH,1.5MM
Graco 197266 PRO Xs Gun Fluid Nozzle, 1.5 mm Orifice Size
$228.00
Shield, 2KS Easy Key Removable Paint
GG 197902
GG 197902
Shield, 2KS Easy Key Removable Paint
$124.00
Ultra 795 XT Standard Series Electric Airless Sprayer, Hi-Boy
GG 19F710
GG 19F710
ULTRA SPRAYER, 795 XT, STD, NA
Graco 19F710 Ultra 795 XT Standard Series Electric Airless Sprayer, Hi-Boy
The Ultra 795 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 795 XT Standard is sure to change the way you spray.
Application: Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job.- Xtreme Torque Motor Technology
- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Rapid-Response Pressure Control
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Selectable Performance Modes
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 - 3,300 psi)
- Endurance Vortex Piston Pump with ProConnect
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- TurboClean Cleaning System
- Industry's fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- WatchDog Pump Protection
- Prevents damage by shutting off pump when it's time to refill
- Durable Filtration
- Easy Out Filter provides easy maintenance and less clogging
- Upgrades with Modular Accessories
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
- Gun, Hose and Tip Included
- Contractor PC Gun & RAC X LP 517 SwitchTip
- Model: Ultra
- Series: 795 XT
- Product Series: Standard
- Frame Configuration: Hi-Boy
- Maximum Flow Rate (GPM): 1.2
- Maximum Tip Size (in): .033
- Maximum Working Pressure (psi): 3300
- Minimum Working Pressure (psi): 50
$8,650.00
Solotech Peristaltic Pump H25 1HP
GG 19C726
GG 19C726
SOLOTECH ST25 PUMP, H25-MPM-FG-SS-A1-A1-0
Graco 19C726 SoloTech h25 Peristaltic Pump, 1 hp BLDC motor with gear reducer, .142-5.22 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove - no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h25
- Barb Material: 316 Stainless Steel
- Gear Ratio: 36.75:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 25
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature ( degree C): 40
- Maximum Operating Temperature ( degree F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature ( degree C): -10
- Minimum Temperature ( degree F): 14
- Motor Type: Brushless DC
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 0
- Overall Height (in): 0
- Overall Height (mm): 0
- Overall Length (cm): 0
- Overall Length (in): 0
- Overall Length (mm): 0
- Overall Width (cm): 0.0
- Overall Width (in): 0
- Overall Width (mm): 0.0
- Power Rating (HP): 0
- Power Rating (kW): 0.75
$10,210.00
15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
GG 19M403
GG 19M403
THERM-O-FLOW HOSE,HEATED,15-FT,#8,3000 PSI
Graco 19M403 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65 degree F to 212 degree F (-54 degree C to 100 degree C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400 degree F (204 degree C)
$3,660.00
Payment options
