GRACO INC. S10595
Chemsafe Pump, 515Pt-P03A-Pt4-Pt-Pt-Po-P
GG 24X495
Chemsafe Pump, 515Pt-P03A-Pt4-Pt-Pt-Po-P Chemsafe Pump, 307Uh-P01A-Uh3-Pt-Pt-Bn
GG 24X501
Chemsafe Pump, 307Uh-P01A-Uh3-Pt-Pt-Bn 
KING HEAVY FLUID SPRAYER, XL70
GG 24X593
KING HEAVY FLUID SPRAYER, XL70
King 70:1 Heavy-Fluid Sprayer, XL10K, XHF Gun, 429 XHD Tip, 3/4 in x 50 ft (15m) Hose, 1/2 in x 25 ft (7.6 m) WhipHigh-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.
Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance.
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
KING HEAVY FLUID SPRAYER, XL80
GG 24X594
KING HEAVY FLUID SPRAYER, XL80
King 80:1 Heavy-Fluid Sprayer, XL10K, XHF Gun, 429 XHD Tip, 3/4 in x 50 ft (15m) Hose, 1/2 in x 25 ft (7.6 m) WhipHigh-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.
Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance.
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
KIT, RETROFIT, GJ TIMER
GG 24X606
KIT, RETROFIT, GJ TIMER
Grease Jockey Timer Retrofit Kit 
KIT, PC-8E, FULLY INTEGRATED
GG 24X641
KIT, PC-8E, FULLY INTEGRATED
PC-8e InvisiPac HM25 or HM50 Pattern Controller, time or distance mode, with or without encoder run up control (optional) KIT INCLUDES: MODULE, GCA, PATTERN CONTROL, INTRN [QTY. 1 ]; POWER SUPPLY, 24V DC, 5A, 120W [QTY. 1 ]; KIT, BRACKET, POWER SUPPLY, PC-8 [QTY. 1 ]; HARNESS, POWER, PC-8 INTERNAL, AWB [QTY. 1 ]; CABLE, CAN, FEMALE-MALE, 0.7M [QTY. 1 ]; CONNECTOR, PLUG, 3.81MM (4 POSITION) [QTY. 1 ]; CONNECTOR, PLUG, 6 POSITION [QTY. 2 ]; CONNECTOR, PLUG, 3.81MM, 7 POSITION [QTY. 2 ]; CONNECTOR, PLUG, 3.81MM, 8 POSITION [QTY. 4 ]; CONNECTOR, PLUG, 3.81MM 12 POSITION [QTY. 1 ]; SCREW, 8-32, SERRATED FLANGE [QTY. 4 ]; FUSE, AUTOMOTIVE, 4A, 32V, MINI [QTY. 1 ]; TIE, CABLE, 7.50 INCH [QTY. 8 ]; TOOL, SCREWDRIVER [QTY. 1 ]; SOFTWARE, GCA, PCM, APP [QTY. 1 ]; DOCUMENT, DECLARATION [QTY. 1 ]; KIT, TOKEN, GCA, KEY, PC-8E [QTY. 1 ] Save money by converting from a solid bead to a stitched bead with the push of a button Highly intuitive color LCD interface – easy to learn, easy to use On-screen pattern preview eliminates guesswork Interface with the LineSite™ Remote Monitoring Solution for optimal process control Used to upgrade InvisiPac HM25 and HM50 systems to include pattern control 
HEAD, MOLSA, 50-0.64MM/2-.025IN
GG 24X652
HEAD, MOLSA, 50-0.64MM/2-.025IN
MOLSA Head, port plug model, 2 inches (50 mm) wide, 0.025 inch (0.64 mm) orificeMulti-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.
Ideal for applying liquid applied sound deadener (LASD) using the Graco 1K Ultra-Lite dispense valve.
Port Plug Model
2 inches (51 mm) wide
0.025 inch (0.64 mm) orifice diameter
HEAD, MOLSA, 50-1.04MM/2-.041IN
GG 24X655
HEAD, MOLSA, 50-1.04MM/2-.041IN
MOLSA Head, port plug model, 2 inches (50 mm) wide, 0.041 inch (1.04 mm) orificeMulti-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.
Ideal for applying liquid applied sound deadener (LASD) using the Graco 1K Ultra-Lite dispense valve.
Port Plug Model
2 inches (51 mm) wide
0.041 inch (1.04 mm) orifice diameter
GL-1 X INJECTOR, 1 POINT
GG 24X801
GL-1 X INJECTOR, 1 POINT
GL-1™ X Grease Injector, One PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, 2 POINT
GG 24X802
GL-1 X INJECTOR, 2 POINT
GL-1™ X Grease Injector, Two PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, 3 POINT
GG 24X803
GL-1 X INJECTOR, 3 POINT
GL-1™ X Grease Injector, Three PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, 4 POINT
GG 24X804
GL-1 X INJECTOR, 4 POINT
GL-1™ X Grease Injector, Four PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, 5 POINT
GG 24X805
GL-1 X INJECTOR, 5 POINT
GL-1™ X Grease Injector, Five PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, 6 POINT
GG 24X806
GL-1 X INJECTOR, 6 POINT
GL-1™ X Grease Injector, Six PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 X INJECTOR, REPLACEMENT
GG 24X807
GL-1 X INJECTOR, REPLACEMENT
GL-1™ X Grease Injector, ReplacementCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 XL INJECTOR, 1 POINT
GG 24X811
GL-1 XL INJECTOR, 1 POINT
GL-1™ XL Grease Injector, One PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments GL-1 XL INJECTOR, 3 POINT
GG 24X813
GL-1 XL INJECTOR, 3 POINT
GL-1™ XL Grease Injector, Three PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 XL INJECTOR, 4 POINT
GG 24X814
GL-1 XL INJECTOR, 4 POINT
GL-1™ XL Grease Injector, Four PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 XL INJECTOR, 6 POINT
GG 24X816
GL-1 XL INJECTOR, 6 POINT
GL-1™ XL Grease Injector, Six PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
GL-1 XL INJECTOR, 5 POINT
GG 24X815
GL-1 XL INJECTOR, 5 POINT
GL-1™ XL Grease Injector, Five PointCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments Kit, Lubepro, Valve, 24Vdc
GG 24Y080
KIT, LUBEPRO, VALVE, 24VDC
Graco 24Y080 LubePro Air Valve Installation Kit - 4-Way 24 VDC Air Valve, Bracket, Air lines, Fittings
Application: For use with LubePro Pneumatic Pumps.- 4-way air valve installation kit – 24 VDC air valve, bracket, air lines, fittings
- For Use With: LubePro Pneumatic Pumps
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 10
- Maximum Working Pressure (kPa): 1000
- Maximum Working Pressure (MPa): 1
- Maximum Working Pressure (psi): 150
- Number of Ports: 4
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Type: NPT
KIT, LUBEPRO, VALVE, 110VAC
GG 24Y081
KIT, LUBEPRO, VALVE, 110VAC
LubePro™ Air Valve Installation Kit - 4-Way 110 VAC Air Valve, Bracket, Air lines, Fittings For use with LubePro™ Pneumatic Pumps.4-way air valve installation kit – 110 VAC air valve, bracket, air lines, fittings
REACTOR A-XP1 PROPORTIONER, WHEELS, CYCLE COUNT
GG 24Y165
REACTOR A-XP1 PROPORTIONER, WHEELS, CYCLE COUNT
Reactor A-XP1 Proportioner with Wheels, DataTrakThe Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Quick Knockdown Pumps
- Allows for easy service
- Fast disassembly
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Easy to operate and maintain
Best choice for affordability and durability
Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray pattern
Easy to operate and maintain
REACTOR A-XP1 PROPORTIONER, BARE
GG 24Y164
REACTOR A-XP1 PROPORTIONER, BARE
Reactor A-XP1 Bare ProportionerThe Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Quick Knockdown Pumps
- Allows for easy service
- Fast disassembly
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Easy to operate and maintain
Best choice for affordability and durability
Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray pattern
Easy to operate and maintain
Kit, Gm100 Cover
GG 24Y170
KIT,GM100 COVER
Graco 24Y170 InvisiPac® GM100 Cover Kit
KIT INCLUDES: ADHESIVE, ANAEROBIC [QTY. 1 ], SCREW, FLAT HEAD, M3X6 [QTY. 8 ], PANEL, GM100 SINGLE, RIGHT [QTY. 1 ], PANEL, GM100 SINGLE, LEFT [QTY. 1 ], PANEL, GM100 SINGLE, FRONT [QTY. 1 ], INSULATOR, GM100 SINGLE COVER [QTY. 2 ], SPACER, GM100 SINGLE COVER [QTY. 4 ], LABEL, WARNING, GM100 SINGLE [QTY. 1 ]
Dura-Flo Xl Pump, 45:1, (18 Cm Sst)
GG 24Y208
DURA-FLO XL PUMP,45:1,(18 CM SST)
Graco 24Y208 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 430cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Minimizes service costs
- Improves structural integrity
Dura-Flo 1800 Pump, Xl, 47:1, (18 Cm Cst)
GG 24Y218
DURA-FLO 1800 PUMP,XL,47:1,(18 CM CST)
Graco 24Y218 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 430cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Minimizes service costs
- Improves structural integrity
Dura-Flo 1200 Pump, Xl, 67:1, (12 Cm Sst)
GG 24Y223
Dura-Flo 1200 Pump, Xl, 67:1, (12 Cm Sst) Dura-Flo Xl Pump, 45:1, (18 Cm Sst), Rh
GG 24Y226
Dura-Flo Xl Pump, 45:1, (18 Cm Sst), Rh
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)LH
GG 24Y227
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)LH
47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, MaxLife Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer XL 1000 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- MaxLife coatings on rods and cylinder maximizes wear life
Standard Threaded Coupler -
Replaceable 1 1/2"-11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)RH
GG 24Y228
DURA-FLO 1800 PUMP, XL, LASD, 47:1, (18CM SST)RH
45:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, MaxLife Right Hand Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer XL 1000 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- MaxLife coatings on rods and cylinder maximizes wear life
Standard Threaded Coupler -
Replaceable 1 1/2"-11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity