GRACO INC. S10595
GRACO INC. S10595 branded products
HYDRA-CLEAN SYSTEM, 40:1 WALL MT
GG 258665
GG 258665
HYDRA-CLEAN SYSTEM, 40:1 WALL MT
Hydra-Clean® 40:1 Wall Mount Pneumatic Pressure Washer PackageClean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions $25,740.00
Thermolazer Sprayer, Complete
GG 258699
GG 258699
THERMOLAZER SPRAYER, COMPLETE
Graco 258699 ThermoLazer 300TC Thermoplastic Striping System, 4 in SmartDie II
Graco's ThermoLazer 300TC is one of the most productive and easy to use thermoplastic handliners in the industry. The system's 300 lb material kettle allows for more striping and less time spent refilling with material, while its EasyGlide Wheel Mount System makes this unit as easy to maneuver as a LineLazer.
- EasyGlide Wheel Mount System
- Front mounted caster along with dual rear pneumatic air-filled tires makes handling safe and as easy to maneuver as a LineLazer striper
- Tri-Flame Die Heat System
- Reliable, safe system to keep die ready to use
- Bead Dispense System
- No-tool system allows fast and easy line width changes
- FatTrack Front Swivel Wheel
- Proven front caster wheel system makes turning fast and easy
- Maneuver curves better
- No need to "muscle" it while moving
- Optional LineDriver System
- Get higher productivity and straighter lines with less fatigue
- Move between jobs without having to push
- Patented Dual Pedal System—Multiple positions allow for simple forward and reverse
- Model: ThermoLazer
- Series: 300TC
- Compatible Material: Thermoplastics, Glass Beads, Alkyds
- Compatible Surfaces: Pavement
- Includes: 4 in SmartDie II
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
$25,850.00
HTX SPRAYER 2030 COMPLETE
GG 258740
GG 258740
HTX SPRAYER 2030 COMPLETE
TexSpray HTX 2030 Complete, FreeFlo Inline Gun and 100 ft Hose The HTX 2030 Gas Mechanical Texture Sprayer is specifically engineered to spray the most demanding materials — from exterior smooth and aggregate coatings, elastomerics, acrylic coatings, drywall mud finishes as well as paints and primers with the optional high-pressure MaxLife Endurance Pump. Apply interior and exterior texture finishes with aggregate size up to 2.5 mm. High-Output Texture Pump- Time-Saving Production Rates
- Pump aggregated materials up to 2.5mm with extra large passages
- More uptime with no-tools hose connections at pump and gun
- Consistent, optimal performance with innovative foot valve soft seal
- Full-Range Flow Control (.6 to 3 gpm)
- Remotely stops and starts material flow right at the pump
- Smooth, controlled material flow prevents pack-out conditions
- Soft start eliminates material blast to ensure finish quality
- Reduced Pack-Out Conditions
- Easily spray more demanding and aggressive aggregate materials
- Maximum flow from oversized, unobstructed fluid passages
- Simulated Acoustic (Popcorn)
- Orange Peel & Fine Splatter
- Splatter
- Knockdown
- Textured Acrylics & Elastomerics
- Deck Coatings
- EIFS & Synthetic Stucco Finish Coats
$17,040.00
HTX SPRAYER, 2030, COMPLETE
GG 258741
GG 258741
HTX SPRAYER, 2030, COMPLETE
TexSpray HTX 2030 Complete Plus+, FreeFlo Inline Gun and 100 ft Hose The HTX 2030 Complete Plus+ Texture Sprayer is specifically engineered to spray the most demanding materials — from exterior smooth and aggregate coatings, elastomerics, acrylic coatings, drywall mud finishes as well as paints and primers with the included high-pressure MaxLife Endurance Pump. Apply interior and exterior texture finishes with aggregate size up to 2.5 mm. High-Output Texture Pump- Time-Saving Production Rates
- Pump aggregated materials up to 2.5mm with extra large passages
- More uptime with no-tools hose connections at pump and gun
- Consistent, optimal performance with innovative foot valve soft seal
- Full-Range Flow Control (.6 to 3 gpm)
- Remotely stops and starts material flow right at the pump
- Smooth, controlled material flow prevents pack-out conditions
- Soft start eliminates material blast to ensure finish quality
- Reduced Pack-Out Conditions
- Easily spray more demanding and aggressive aggregate materials
- Easily Expand Job Capabilities
- Easily convert to a high-pressure airless sprayer
- Spray heavier smooth coatings: skim coat, level 5, primers and paints
- System automatically recognizes installed pump and converts to airless sprayer
- Maximum flow from oversized, unobstructed fluid passages
- Simulated Acoustic (Popcorn)
- Orange Peel & Fine Splatter
- Splatter
- Knockdown
- Textured Acrylics & Elastomerics
- Deck Coatings
- EIFS & Synthetic Stucco Finish Coats
- Skim Coat/Level 5 (Airless)
- Primers/Paints (Airless)
$20,690.00
RS GUN, ASM, INT MIX, CHOP
GG 258854
GG 258854
RS GUN, ASM, INT MIX, CHOP
RS Internal Mix Chop Gun with TipInnovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.
Makes production easier
- Simple, quick start up and shut down
- Quick tool-less blade change
- No need to adjust needle settings after maintenance
Improves product quality
- Lightweight cutter gives better chopping control
- Easy one-hand cutter speed control
- Superior spray pattern
Improves operator comfort for increased job satisfaction
- Lighter, ergonomic gun reduces fatigue
- Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
- No problems soaking the RS Gun in solvents overnight
Saves material costs
- Air Assist Containment (AAC®) standard on all RS Guns
- Lower pressure reduces overspray
$3,220.00
UNIDRUM SUPPLY UNIT, LH, SST, 47:1, 24V
GG 258910
GG 258910
UNIDRUM SUPPLY UNIT, LH, SST, 47:1, 24V
UniDrum, 47:1 Ratio, XL 10000, Left Handed Supply Unit Pneumatic bulk unloader efficiently evacuates 300 gallon (1200 liter) magna drums or tote drums, supplying one-component, medium to high viscosity adhesive and sealant to industrial and automotive applications. Bulk supply system works well when spraying underbody material and applying sealing beads to car and truck bodies. XL 10000™ air motor has a modular design for easy maintenance XL motor air valves help eliminate ice-induced stalling Left handed pneumatic control minimizes changeover time in a tandem setup. As the drum on one side is being filled, the drum on the other side supplies the material. $121,360.00
UNIDRUM SUPPLY UNIT, RH, SST, 47:1, 24V
GG 258911
GG 258911
UNIDRUM SUPPLY UNIT, RH, SST, 47:1, 24V
UniDrum, 47:1 Ratio, XL 10000, Right Handed Supply Unit Pneumatic bulk unloader efficiently evacuates 300 gallon (1200 liter) magna drums or tote drums, supplying one-component, medium to high viscosity adhesive and sealant to industrial and automotive applications. Bulk supply system works well when spraying underbody material and applying sealing beads to car and truck bodies. XL 10000™ air motor has a modular design for easy maintenance XL motor air valves help eliminate ice-induced stalling Right handed pneumatic control minimizes changeover time in a tandem setup. As the drum on one side is being filled, the drum on the other side supplies the material. $121,360.00
UNIDRUM SYSTEM, SUPPLY UNIT, LEFT HAND
GG 258956
GG 258956
UNIDRUM SYSTEM, SUPPLY UNIT, LEFT HAND
UniDrum, 35:1 Ratio, XL 10000, Stainless Steel, Left Handed Supply Unit Pneumatic bulk unloader efficiently evacuates 300 gallon (1200 liter) magna drums or tote drums, supplying one-component, medium to high viscosity adhesive and sealant to industrial and automotive applications. Bulk supply system works well when spraying underbody material and applying sealing beads to car and truck bodies. XL 10000™ motor air valves help eliminate ice-induced stalling Left handed pneumatic control minimizes changeover time in a tandem setup. As the drum on one side is being filled, the drum on the other side supplies the material. $119,230.00
UNIDRUM SYSTEM, SUPPLY UNIT, RIGHT HAND
GG 258957
GG 258957
UNIDRUM SYSTEM, SUPPLY UNIT, RIGHT HAND
UniDrum, 35:1 Ratio, XL 10000, Stainless Steel, Right Handed Supply Unit Pneumatic bulk unloader efficiently evacuates 300 gallon (1200 liter) magna drums or tote drums, supplying one-component, medium to high viscosity adhesive and sealant to industrial and automotive applications. Bulk supply system works well when spraying underbody material and applying sealing beads to car and truck bodies. XL 10000™ motor air valves help eliminate ice-induced stalling Right handed pneumatic control minimizes changeover time in a tandem setup. As the drum on one side is being filled, the drum on the other side supplies the material. $119,230.00
Reactor E-8P Sprayer, Bare
GG 259082
GG 259082
REACTOR E-8P SPRAYER, BARE
Graco 259082 Reactor E-8P Bare Sprayer, 120 V
The Reactor E-8p Portable Plural-Component Sprayer offers the mobility and efficiency you need to complete small to medium sized joint filling jobs with ease. With easy control and the ability to pump directly from 5 Gallon (20 Liter) material pails, the Reactor E-8p can help you reduce work time and labor costs.
Application: The Reactor E-8p is ideal for small to mid-sized no-heat joint fill applications- Lightweight and Portable
- Built in handles for easy carrying
- Weighs just 95 pounds (43 kg)
- Easy to maneuver
- Simple siphon feeding from 5 gal (19 L) buckets
- Efficient and Fast
- Simple user controls
- Electric motor offers high performance while reducing operating costs
- Recommended maximum output of 0.25 gpm (.95 lpm)
- Built for Maximum Usability
- Simple, single control knob operation
- Onboard hose wrap makes storing equipment simple and fast
- Plugs into standard electrical wall outlet
- Built-in suction lines allow for use with 5-gal (19 L) pails
- Lightweight and Portable
- Easy to maneuver up and down stairs, wherever the job goes – only 95 lb (43 kg)
- Alarm / Status Indicator
- Shuts down unit if off-ratio conditions exist – assures good quality foam at the job site
- Desiccant Air Dryer
- Allows air to be drawn into pail, protects material from contamination.
- Pressure Balance Valves
- Quick and easy balancing of system pressures enables correct start-up
- Threaded Bucket Spout Connection
- Keeps your connection secure and prevents spills
- Electric Motor
- Proven motor performance and reduced operating costs, plugs into a standard residential outlet
- Easy Controls
- Intuitive start/stop with single knob operation
- Spray Guns
- Uses standard Graco Fusion or P2 Guns, provides consistent spray patterns
- Non-heated Hose
- Easy to maneuver – 70% lighter than standard Reactor heated hose
- Carrying Handle/Hose Wrap
- Easy to transport, convenient hose storage
- Model: Reactor
- Series: E-8P
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Outlet Size (cm): 0.635
- Air Outlet Size (in): 1/4
- Air Outlet Size (mm): 6.35
- Air Outlet Thread Type: NPSM
- Amperage (A): 15
- Application: Spray Foam
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Material Application: Polyurethane Foam
- Maximum Flow Rate (kg/min): 5.44
- Maximum Flow Rate (lb/min): 12
- Maximum Hose Length (ft): 105
- Maximum Hose Length (m): 32
- Maximum Mix Ratio: 1:1
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 14
- Maximum Working Pressure (
$12,420.00
Reactor E-8P Sprayer, Bare, 240V
GG 259083
GG 259083
REACTOR E-8P SPRAYER, BARE, 240V
Graco 259083 Reactor E-8P Bare Sprayer, 240 V
The Reactor E-8p Portable Plural-Component Sprayer offers the mobility and efficiency you need to complete small to medium sized joint filling jobs with ease. With easy control and the ability to pump directly from 5 Gallon (20 Liter) material pails, the Reactor E-8p can help you reduce work time and labor costs.
Application: The Reactor E-8p is ideal for small to mid-sized no-heat joint fill applications- Lightweight and Portable
- Built in handles for easy carrying
- Weighs just 95 pounds (43 kg)
- Easy to maneuver
- Simple siphon feeding from 5 gal (19 L) buckets
- Efficient and Fast
- Simple user controls
- Electric motor offers high performance while reducing operating costs
- Recommended maximum output of 0.25 gpm (.95 lpm)
- Built for Maximum Usability
- Simple, single control knob operation
- Onboard hose wrap makes storing equipment simple and fast
- Plugs into standard electrical wall outlet
- Built-in suction lines allow for use with 5-gal (19 L) pails
- Lightweight and Portable
- Easy to maneuver up and down stairs, wherever the job goes – only 95 lb (43 kg)
- Alarm / Status Indicator
- Shuts down unit if off-ratio conditions exist – assures good quality foam at the job site
- Desiccant Air Dryer
- Allows air to be drawn into pail, protects material from contamination.
- Pressure Balance Valves
- Quick and easy balancing of system pressures enables correct start-up
- Threaded Bucket Spout Connection
- Keeps your connection secure and prevents spills
- Electric Motor
- Proven motor performance and reduced operating costs, plugs into a standard residential outlet
- Easy Controls
- Intuitive start/stop with single knob operation
- Spray Guns
- Uses standard Graco Fusion or P2 Guns, provides consistent spray patterns
- Non-heated Hose
- Easy to maneuver – 70% lighter than standard Reactor heated hose
- Carrying Handle/Hose Wrap
- Easy to transport, convenient hose storage.
- Model: Reactor
- Series: E-8P
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Outlet Size (cm): 0.635
- Air Outlet Size (in): 1/4
- Air Outlet Size (mm): 6.35
- Air Outlet Thread Type: NPSM
- Amperage (A): 10
- Application: Spray Foam
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Material Application: Polyurethane Foam
- Maximum Flow Rate (kg/min): 5.44
- Maximum Flow Rate (lb/min): 12
- Maximum Hose Length (ft): 105
- Maximum Hose Length (m): 32
- Maximum Mix Ratio: 1:1
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 14
- Maximum Working Pre
$12,420.00
KIT, FITTINGS, GREASE JOCKEY
GG 25A044
GG 25A044
KIT, FITTINGS, GREASE JOCKEY
Grease Jockey Pump Accessories - Service Startup and Spares Kit For use with Grease Jockey On-Road Mobile Lubrication Systems. Service startup and spares kit $959.00
MBL LUBRICATOR, 2PT. 60:1 HORZ MOUNTING
GG 25A071
GG 25A071
MBL LUBRICATOR, 2PT. 60:1 HORZ MOUNTING
Lubricator, 2 pt., 60:1, Horizontal MountGraco Manzel box lubricators – when quality and delivery matter! Made with Graco quality for long life and durability, the Manzel MB60 is perfect for bolt-on gas compressor box lubrication solutions.
Provide a proven, cost-effective way to assemble customized oil systems that meet specific requirements by using standard modular components Increase opportunities to standardize lube system components and reduce lube maintenance and service costs 8 pint (3.79 liter) reservoir (6 pump stations max), no pumps installed, 118:1 $4,680.00
TIMER, GREASE JOCKEY, 10' LEAD
GG 25A118
GG 25A118
TIMER, GREASE JOCKEY, 10' LEAD
Grease Jockey Digital Timer & 10 foot Wiring Harness Kit for Pneumatic Grease Jockey® On-Road Mobile Lubrication Systems For use with Grease Jockey On-Road Mobile Lubrication Systems. Grease Jockey digital timer with flying leads $422.00
KIT, REPAIR, SPRAY VALVE
GG 25A182
GG 25A182
KIT, REPAIR, SPRAY VALVE
Repair Kit for Spra-Control™ Valve For use with Spra-Control™ Valves. $91.50
DYNA-STAR HYDRAULIC PUMP, GREASE, HP 120#
GG 25A189
GG 25A189
DYNA-STAR HYDRAULIC PUMP, GREASE, HP 120#
Dyna-Star® HP 10:1 High Ratio Hydraulic Lubrication Pump - 120 lb (55 kg).Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.
Pumps for heavy duty automatic lubrication and transfer systems.Less Downtime and Lower Cost of Ownership
- Uses up to 3 times less energy than pneumatic systems
- Fewer moving parts reduces pump wear and maintenance
- Self-lubricating for long-life and dependable operations
Quiet and Smooth Operation
- Field proven operations
- Ultra-quiet hydraulic motor
- Graco's reciprocator piston minimizes change-over stalls
Ease of Installation
- No assembly required, fits in a standard 120lb (55 kg) grease drum
- Lighter, more compact design than competition
- Easy to connect, low-pressure hydraulic input
$8,620.00
VALVE, VENT, 24VDC, N.O.NPT, DEU LH
GG 25A211
GG 25A211
VALVE, VENT, 24VDC, N.O.NPT, DEU LH
Direct-Mount Vent Valves for G3 Pumps - NPT, 24 VDC, 500-3500 psi, Normally Open, LHIndustry leading feature for your lube system needs.
Vent valves are designed to be mounted to the G3 Electric Lubrication Pump to make it simple to install your injector based lube systems.Easily mounts to your G3 pump.
Eliminates time and material costs associated with remote mounted vent valves.
24 VDC
Normally Open
The normally open valve works with the G3 Standard no control pump. With an external control just add power to the pump and valve to run a lube cycle, and remove power from both to vent pressure.
Adjustable pressure relief is integrated into the valve, no need to purchase an additional relief valve.
Deutsch Power Connection
$441.00
Applicator, Stucco6Inlg W/Cam Fitting
GG 25A217
GG 25A217
Applicator, Stucco6InLg W/Cam Fitting $1,005.00
KIT, SEAT, 1040, FG SS
GG 25A276
GG 25A276
KIT, SEAT, 1040, FG SS
1-inch 316 Stainless Steel Seat Kit $228.00
Kit, Ball-D1/E1 Cw
GG 25A299
GG 25A299
KIT, BALL-D1/E1 CW
Graco 25A299 1-inch Polychloroprene Weighted Check Ball Kit
$1,110.00
Toughtek System, S340E, 120V, Bare
GG 25A300
GG 25A300
TOUGHTEK SYSTEM, S340E, 120V, BARE
Graco 25A300 ToughTek S340e Bare Piston Pump System, 120V, 15A
Engineered with Graco’s proprietary piston pump technology, the ToughTek S340e can easily handle repair mortars with small to medium sized aggregate. The S340e can also deliver all materials through long hose lengths, allowing you to spray farther distances and get the job done sooner.
Application: Portable electric pump for stucco and EIFS applications- Easily handles stucco and EIFS materials – base coats to finish coats, even air / water-resistive barrier materials
- Electric operation – plugs into a standard 120V, 15A wall outlet
- Extremely easy to operate
- Lightweight – easily lifted by two people
- Easy to transport – fits in the back of a pickup
- Fast and easy maintenance
- Model: ToughTek
- Series: S340e
- Application: Industrial
- Compatible Material: Cementitious Material
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Input Voltage (V ac): 120
- Material: Stucco, EIFS, Repair Mortar
- Maximum Flow Rate (GPM): 6.5
- Maximum Flow Rate (L/min): 24.61
- Maximum Input Amperage (A): 15
- Maximum Working Pressure (bar): 41.3
- Maximum Working Pressure (kPa): 4130
- Maximum Working Pressure (MPa): 4.1
- Maximum Working Pressure (psi): 600
- Minimum Flow Rate (GPM): 600
- Power Type: Electric
$15,140.00
TOUGHTEK SYSTEM, S340E, 120V, W/REMOTE
GG 25A302
GG 25A302
TOUGHTEK SYSTEM, S340E, 120V, W/REMOTE
ToughTek S340e Bare Piston Pump System, Remote On/Off Switch, 120V, 15AEngineered with Graco’s proprietary piston pump technology, the ToughTek S340e can easily handle repair mortars with small to medium sized aggregate. The S340e can also deliver all materials through long hose lengths, allowing you to spray farther distances and get the job done sooner.
Portable electric pump for stucco and EIFS applications Easily handles stucco and EIFS materials – base coats to finish coats, even air / water-resistive barrier materials Electric operation – plugs into a standard 120V wall outlet Extremely easy to operate Compact design – fits in tight areas Lightweight – easily lifted by two people Easy to transport – fits in the back of a pickup Fast and easy maintenance $15,700.00
Toughtek System, S340E, 230V, Bare
GG 25A304
GG 25A304
TOUGHTEK SYSTEM, S340E, 230V, BARE
Graco 25A304 ToughTek S340e Bare Piston Pump System, 230V, 10A
Engineered with Graco’s proprietary piston pump technology, the ToughTek S340e can easily handle repair mortars with small to medium sized aggregate. The S340e can also deliver all materials through long hose lengths, allowing you to spray farther distances and get the job done sooner.
Application: Portable electric pump for stucco and EIFS applications- Easily handles stucco and EIFS materials – base coats to finish coats, even air / water-resistive barrier materials
- Electric operation – plugs into a standard 120V, 15A wall outlet
- Extremely easy to operate
- Lightweight – easily lifted by two people
- Easy to transport – fits in the back of a pickup
- Fast and easy maintenance
- Model: ToughTek
- Series: S340e
- Application: Industrial
- Compatible Material: Cementitious Material
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Input Voltage (V ac): 230
- Material: Stucco, EIFS, Repair Mortar
- Maximum Flow Rate (GPM): 6.5
- Maximum Flow Rate (L/min): 24.61
- Maximum Input Amperage (A): 10
- Maximum Working Pressure (bar): 41.3
- Maximum Working Pressure (kPa): 4130
- Maximum Working Pressure (MPa): 4.1
- Maximum Working Pressure (psi): 600
- Minimum Flow Rate (GPM): 600
- Power Type: Electric
$15,140.00
Toughtek System, S340E, 230V, Bare, W/Remote
GG 25A306
GG 25A306
TOUGHTEK SYSTEM, S340E, 230V, BARE, W/REMOTE
Graco 25A306 ToughTek S340e Bare Piston Pump System, Remote On/Off Switch, 230V, 10A
Engineered with Graco’s proprietary piston pump technology, the ToughTek S340e can easily handle repair mortars with small to medium sized aggregate. The S340e can also deliver all materials through long hose lengths, allowing you to spray farther distances and get the job done sooner.
Application: Portable electric pump for stucco and EIFS applications- Easily handles stucco and EIFS materials – base coats to finish coats, even air / water-resistive barrier materials
- Electric operation – plugs into a standard 120V, 15A wall outlet
- Extremely easy to operate
- Lightweight – easily lifted by two people
- Easy to transport – fits in the back of a pickup
- Fast and easy maintenance
- Model: ToughTek
- Series: S340e
- Application: Industrial
- Compatible Material: Cementitious Material
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Remote On/Off Switch
- Input Voltage (V ac): 230
- Material: Stucco, EIFS, Repair Mortar
- Maximum Flow Rate (GPM): 6.5
- Maximum Flow Rate (L/min): 24.61
- Maximum Input Amperage (A): 10
- Maximum Working Pressure (bar): 41.3
- Maximum Working Pressure (kPa): 4130
- Maximum Working Pressure (MPa): 4.1
- Maximum Working Pressure (psi): 600
- Minimum Flow Rate (GPM): 600
- Power Type: Electric
$15,700.00
Dura-Flo 1000 Pump, Recip, 18Cm-Sst, Max
GG 25A450
GG 25A450
DURA-FLO 1000 PUMP,RECIP,18CM-SST,MAX
$37,070.00
DURA-FLO 1000 PUMP, XL, 47:1, SS, MAXLIFE
GG 25A454
GG 25A454
DURA-FLO 1000 PUMP, XL, 47:1, SS, MAXLIFE
47:1 - 1000cc Dura-Flo Pump with XL 24000 Air Motor, MaxLife Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer XL 24000 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- MaxLife coatings on rods and cylinder maximizes wear life
Standard Threaded Coupler -
Replaceable Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
$52,630.00
MOTOR, XL, 24000
GG 25A455
GG 25A455
MOTOR, XL, 24000
XL 24000 Air Motor KIT INCLUDES: MOTOR, AIR, 13 INCH (33 CM), 11.25 STROKE [QTY. 1 ]; WIRE, GROUND ASSEMBLY W/ CLAMP [QTY. 1 ]; FITTING, ELBOW, 90, 1NPT, MF, CS, 4.2K [QTY. 1 ]; SWIVEL, SWIVEL UNION 1000-M [QTY. 1 ]; SEALANT, PIPE, SST [QTY. 1 ] The XL 24000 is intended to directly mount to the 1000c Dura-Flow Lower. $15,490.00
Reactor Heated Hose, 2000, W/Scuff, 1/4X3/8
GG 25A482
GG 25A482
Reactor Heated Hose, 2000, W/Scuff, 1/4X3/8 $2,750.00
Reactor Heated Hose, 3500, W/Scuff, 1/4X1/2in
GG 25A483
GG 25A483
Reactor Heated Hose, 3500, W/Scuff, 1/4X1/2In $4,180.00
REACTOR HEATED HOSE, 1/4X3/8, DUAL CABLE
GG 25A485
GG 25A485
REACTOR HEATED HOSE, 1/4X3/8, DUAL CABLE
50 ft (15 m) Custom Application 2 Component Hose with 1/4 in (6.3 mm) and 3/8 in (9.5 mm) Inside DiameterGraco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
$4,360.00