GRACO INC. S10595
DYNA-STAR HYDRAULIC PUMP, GREASE , 120#
GG 247443
DYNA-STAR HYDRAULIC PUMP, GREASE , 120#
Hydraulic Dyna-Star® 10:1 High Ratio Lubrication Pump - 120 lb (55 kg).Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.
Electric pumps for heavy duty automatic lubrication and transfer systems. Uses up to 3 times less energy than pneumatic systems Fewer moving parts reduces pump wear and maintenance Self-lubricating for long-life and dependable operations Ultra-quiet hydraulic motor Graco's reciprocator piston minimizes change-over stalls No assembly required, fits in a standard 120 lb (55 kg) grease drum Lighter, more compact design than competition Easy to connect, low-pressure hydraulic input MODULE, PUMP, HYDRAULIC, 120#
GG 247444
MODULE, PUMP, HYDRAULIC, 120#
Hydraulic Dyna-Star® 10:1 Pump Module - Injector, 120 lb. Reservoir, Hydraulic Control, Vent ValveHeavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.
For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing Convenient pressure and flow control built-in Hydraulic control module-all your controls in one package for easy system setup and maintenance Dyna-Star 10:1 90 lb (41 kg) pump module – injector – overall height 42.75 in (1086 mm) 
DYNA-STAR HYDRAULIC PUMP, GREASE 400#
GG 247450
DYNA-STAR HYDRAULIC PUMP, GREASE 400#
Hydraulic Dyna-Star® 10:1 High Ratio Lubrication Pump - 400 lb (180 kg).Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.
Electric pumps for heavy duty automatic lubrication and transfer systems. Uses up to 3 times less energy than pneumatic systems Fewer moving parts reduces pump wear and maintenance Self-lubricating for long-life and dependable operations Ultra-quiet hydraulic motor Graco's reciprocator piston minimizes change-over stalls No assembly required, fits in a standard 120 lb (55 kg) grease drum Lighter, more compact design than competition Easy to connect, low-pressure hydraulic input HYDRA-CLEAN SYSTEM, 23:1 CART MT
GG 247551
HYDRA-CLEAN SYSTEM, 23:1 CART MT
Hydra-Clean® 23:1 Cart Mount Pneumatic Pressure Washer PackageClean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions
HYDRA-CLEAN SYSTEM, 23:1 WALL MT
GG 247552
HYDRA-CLEAN SYSTEM, 23:1 WALL MT
Hydra-Clean® 23:1 Wall Mount Pneumatic Pressure Washer PackageClean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions 
MODULE, PUMP, HYDRAULIC, 60#
GG 247574
MODULE, PUMP, HYDRAULIC, 60#
Hydraulic Dyna-Star® 10:1 Pump Module - Injector, 60 lb (27 kg). Reservoir, Hydraulic Control, Vent ValveHeavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.
For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing Convenient pressure and flow control built-in Hydraulic control module - all your controls in one package for easy system setup and maintenance Dyna-Star 10:1 60 lb (27 kg) pump module – injector – overall height 35.15 in (842 mm) PLATE, FOLLOW, 400#
GG 247702
PLATE, FOLLOW, 400#
Follower Plate for 400 lb (180 kg). Drum without Tube-in-Tube For use with Electric Dyna-Star® HP and HF 24 VDC Lubrication Systems. Follower plate for 400 pound (180 kg) drum without tube-in-tube COVER, DRUM, 120#
GG 247703
COVER, DRUM, 120#
120 lb. (55 kg) Drum Cover for Dyna-Star 10:1 Refinery Drum For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. 120 lb (55 kg) Refinery Drum Cover COVER, DRUM, 400#
GG 247704
COVER, DRUM, 400#
400 lb. (180 kg) Drum Cover for Dyna-Star 10:1 Refinery Drum For use with Hydraulic Dyna-Star® Pumps 400 lb (180 kg) Refinery Drum Cover KIT, HYD CONTROL MODULE
GG 247705
KIT, HYD CONTROL MODULE
Hydraulic Control Kit for Dyna-Star 10:1 Refinery Drum And Custom Tank Applications For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. Hydraulic control assembly Sdv15 Valve, Bare
GG 247717
SDV15 VALVE, BARE
Graco 247717 SDV15 Series Bare Control Valve - 1/2 in. (13 mm) Inlet - NPT
For standard and heavy-duty applications, both indoor and outdoor, the SDV15 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 15 gpm (56.8 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, In-plant, Lube trucks, and Mining.- Lock-on/Lock-off trigger allows hands free operation
- Sturdy cast body designed for use in tough environments
- Inlet 1/2 in. NPT with swivel
- Model: SDV15
- Compatible Material: Oil, Antifreeze, Gear Lube
- Dispense Type: Manual
- Display Type: N/A
- Extension Type: Bare
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Gender: Female
- Inlet Thread Type: NPT
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (psi): 1500
- Minimum Operating Temperature (°C): -40
- Minimum Operating Temperature (°F): -40
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Gender: Female
- Outlet Thread Type: Straight Thread O-Ring Boss
- Recommended Environment: Indoor, Outdoor
XDV20 VALVE, BARE
GG 247724
XDV20 VALVE, BARE
XDV20 Bare Control Valve - 1/2 in. (13 mm) Inlet - NPTFor standard and heavy-duty applications, both indoor and outdoor, the XDV20 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 20 gpm (75.7 lpm).
High-flow, non-metered oil dispense for Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining. Lock-on/Lock-off trigger allows hands free operation Sturdy cast body designed for use in tough environments Inlet 1/2 in. NPT with swivel Bare valve without nozzle or extension