GRACO INC. S10595
GRACO INC. S10595 branded products
AGITATOR
GG 204536
GG 204536
AGITATOR
Pail Cover Agitator for 5 Gallon (18 L) Pails, Air-Driven, 1/4 HP, 13.25 inches (33.6 cm) long, SST, Round Prop (3 Blade) Lift handles for easy moving and color changes Locking bolts to secure cover and reduce spills Ideal for wall mount pumps or spray packages $1,190.00
MANUAL PUMP, LUBT HNDOPRD
GG 204867
GG 204867
MANUAL PUMP, LUBT HNDOPRD
Hand-Operated, 120 lb (55 kg). Gear Lube Dispenser Hand Pump Assembly Designed for manual dispensing of fluid oil from bulk containers to point of application. $757.00
PULSE PRO EXTENDER REPEATER, FMS, US WALL MOUNT
GG 20A058
GG 20A058
PULSE PRO EXTENDER REPEATER, FMS, US WALL MOUNT
Pulse® Extender (US) - Wall MountExtend your Pulse® fluid management network wirelessly with extenders. The Pulse® wireless network can easily be expanded to accomodate large shops or a large number of devices. Simply plug the Extender into wall power to extend the network.
FAST INSTALLATION, BETTER INVENTORY CONTROL
Increase your productivity — use Pulse fluid management anywhere in your shop with an Extender or Remote Extender Everything you need, right out of the box. Simply plug in to power and connect with Ethernet or Wi-Fi if needed Flexible — two extender options whether you are extending an existing shop or a secondary building Wireless communication — receives signals from the meter, pump air control (PAC) and tank level monitor within 100-meter range Status lights — quickly verify extender is powered $637.00
APPLICATOR, TAPELAZER, W/LAZERGUIDE
GG 20A140
GG 20A140
APPLICATOR, TAPELAZER, W/LAZERGUIDE
TapeLazer HP Automatic Series Traffic Tape Applicator, LazerGuide 3000, LED Light The Graco TapeLazer is a fully-automatic, walk/ride-behind, gas-powered traffic tape applicator that includes key features from our renowned LineLazer V HP Automatic stripers for fast, easy taping applications. Include the Graco patented LineDriver to maximize productivity on every application. Apply permanent or temporary tape up to 14 inch wide, at truck speeds, within 3 inches of a road edge while being able to cut tape on-the-fly with the push of a button. Apply double lines in a single pass and pre-program skips with no layout required. On-surface & deep inlay groove applications. HP Automatic System- Push button tape application
- Start/Stop with the push of a button
- Put down skip lines with ease using the built-in Automatic mode
- System Delay for accurate starts/stops
- Consistent, quality results
- Non-stick design — single blade cuts on non-adhesive side of the blade — no oiler needed
- Exclusive 2-stage cutting process delivers the best possible adhesion
- Fast, easy adjustments
- Slide tape carriage right or left to get within 3 inches of road edge
- Keeps you safe — out of traffic
- Fast tape loading
- Tool-less locator collars for quick/easy change-out
- Tape Bar Guide Mark System allows for quick and easy tape alignment resulting in straighter lines
- Superior tape adhesion
- Non-stick silicone eliminates primer build-up
- Segmented design allows roller width to match tape width for optimal tamp on all applications
- Trouble-free cutting
- Single blade cuts on the non-adhesive side of the tape eliminating adhesive buildup and the need for an oiler
- Less downtime
- Swap out the blade in seconds — keeps you up and running on the job
- Debris-free design
- Exclusive design keeps the front tires and debris out of the primer — resulting in better adhesion
- Easier, laser-straight lines
- Longer distance accuracy
- Highly-visible laser guise
- Faster, simple operation
- LED light for improved brightness with long life and less amp draw
- Versatile magnetic mount provides flexibility for attaching to TapeLazer
$57,480.00
BATTERY, DEWALT, 60V, USA/CA, POP
GG 20A162
GG 20A162
BATTERY, DEWALT, 60V, USA/CA, POP
DEWALT 20V/60V MAX FLEXVOLT 6.0 Ah Lithium Ion Battery Pack High-capacity FLEXVOLT 6.0 Ah battery sprays up to 3 gallons per battery charge. DEWALT® and the DEWALT logo are trademarks of DEWALT Industrial Tool Co. or an affliate thereof and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools & accessories. $308.00
CHARGER, FAST, DEWALT, 60V, US/CA, POP
GG 20A165
GG 20A165
CHARGER, FAST, DEWALT, 60V, US/CA, POP
DEWALT Fan-Cooled Fast Charger The DCB118 Fast Charger is a fan-cooled charger that is compatible with 20V MAX batteries and FLEXVOLT 20V/60V MAX batteries. The charge rate is 8 amps for premium batteries and 4 amps for compact batteries. DEWALT® and the DEWALT logo are trademarks of DEWALT Industrial Tool Co. or an affliate thereof and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools & accessories. $181.00
Cylinder, Air, Trunnion, Wiper .5 Str
GG 20A210
GG 20A210
Cylinder, Air, Trunnion, Wiper .5 Str $406.00
Enclosure, Batt, 390, Cordles, Complete
GG 20A270
GG 20A270
Enclosure, Batt, 390, Cordles, Complete $18.20
FTX GUN, LP515, PACKAGED
GG 20A479
GG 20A479
FTX GUN, LP515, PACKAGED
Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC X LP515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC X LP515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$452.00
KIT, 200:1, 400 LB BARREL
GG 20A560
GG 20A560
KIT, 200:1, 400 LB BARREL
Dyna-Star® 200:1 Air-Powered Grease Pump with Cover for 400 lb (180 kg) Barrel Graco Dyna-Star Air-Powered pumps offer reliability you can trust to provide fast grease delivery against high back pressure in an easy-to-service package. For use in hydraulic fracturing wellhead service and maintenance, well service blow out preventer maintenance and well service valve maintenance. Fast Flow at Higher Pressures - 20,000 PSI (1,379 bar) maximum operating pressure with 1.5 L/min flow at 10,000 psi back pressure. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. CE and Hazardous Location Certified - ATEX Ex II 2 G Ex h IIA T4 Gb. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. 100% assembled and tested in the USA. $11,780.00
KIT, 200:1, 120 LB KEG
GG 20A561
GG 20A561
KIT, 200:1, 120 LB KEG
Dyna-Star® 200:1 Air-Powered Grease Pump with Cover for 120 lb (55 kg) Keg Graco Dyna-Star Air-Powered pumps offer reliability you can trust to provide fast grease delivery against high back pressure in an easy-to-service package. For use in hydraulic fracturing wellhead service and maintenance, well service blow out preventer maintenance and well service valve maintenance. Fast Flow at Higher Pressures - 20,000 PSI (1,379 bar) maximum operating pressure with 1.5 L/min flow at 10,000 psi back pressure. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. CE and Hazardous Location Certified - ATEX Ex II 2 G Ex h IIA T4 Gb. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. 100% assembled and tested in the USA. $11,290.00
Kit, 120:1, 400 Lb Barrel
GG 20A562
GG 20A562
KIT, 120:1, 400 LB BARREL
Graco 20A562 Dyna-Star® 120:1 Air-Powered Grease Pump with Cover for 400 lb (180 kg) Barrel
Graco Dyna-Star Air-Powered pumps offer reliability you can trust to provide fast grease delivery against high back pressure in an easy-to-service package.
Application: For use in hydraulic fracturing wellhead service and maintenance, well service blow out preventer maintenance, well service valve maintenance and large rope shovel lubrication systems.- Fast Flow at Higher Pressures - 12,000 PSI (827 bar) maximum operating pressure with 1.5 L/min flow at 8,500 psi back pressure.
- Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements.
- CE and Hazardous Location Certified - ATEX Ex II 2 G Ex h IIA T4 Gb.
- 100% assembled and tested in the USA.
- Model: Dyna-Star
- Series: 120:1
- Application: In-Plant Machinery, Off-Road Equipment
- Compatible Material: Grease
- Kit Type: Pump Kit
- Maximum NLGI Grade: 2
- Maximum Operating Pressure (psi): 12000
- Maximum Working Pressure (bar): 827
- Maximum Working Pressure (psi): 12000
- Number of Pieces: 2
- Number of Pump Elements: 1
- Power Type: Pneumatic
$11,340.00