GRACO INC. S10595

GRACO INC. S10595 branded products
View as Grid List
Sort by
FUSION MP GUN, XF4747, FTM638

FUSION MP GUN, XF4747, FTM638

GG 247082

GG 247082

FUSION MP GUN, XF4747, FTM638

Fusion Mechanical Purge DI Gun, 0.038 in (0.96 mm) Orifice Size, 0.047 in (1.2 mm) Impingement Port, & 12-14 in (305-356 mm) Flat Pattern Size

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

For high output spray polyurethane foam and polyurea applications. Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit Long-lasting PolyCarballoy mix module Advanced mix module and tip provides superior mixing capabilities
$4,560.00
Fusion Mp Gun, Xf4747,ftm838

Fusion Mp Gun, Xf4747,ftm838

GG 247083

GG 247083

FUSION MP GUN, XF4747, FTM838

Graco 247083 Fusion Mechanical Purge DI Gun, 0.038 in (0.96 mm) Orifice Size, 0.047 in (1.2 mm) Impingement Port, & 16-18 in (406-457 mm) Flat Pattern Size

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Direct Impingement
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Direct Impingement (DI)
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 16-18 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Xf5757,ftm638

Fusion Mp Gun, Xf5757,ftm638

GG 247089

GG 247089

FUSION MP GUN, XF5757, FTM638

Graco 247089 Flat Pattern Fusion Mechanical Purge Direct Impingement Gun, 0.038 in (0.96 mm) Orifice Size & Mix Chamber, 0.057 in (1.45 mm) Impingement port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Direct Impingement
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Direct Impingement (DI)
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 14 in @ 24 in from target
$4,560.00
Fusion Mp Gun, Xf5757,ftm838

Fusion Mp Gun, Xf5757,ftm838

GG 247090

GG 247090

FUSION MP GUN, XF5757, FTM838

Graco 247090 Flat Pattern Fusion Mechanical Purge Direct Impingement Gun, 0.038 in (0.96 mm) Orifice Size & Mix Chamber, 0.038 in (0.96 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Direct Impingement
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Direct Impingement (DI)
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 16-18 in @ 24 in from target
$4,560.00
Fusion Mp Gun, Xf5757,ftm848

Fusion Mp Gun, Xf5757,ftm848

GG 247091

GG 247091

FUSION MP GUN, XF5757, FTM848

Graco 247091 Flat Spray Fusion Mechanical-Purge Direct Impingement Spray Gun

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Direct Impingement
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Direct Impingement (DI)
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Fusion Mp Gun, Xf3535,ftm624

Fusion Mp Gun, Xf3535,ftm624

GG 247074

GG 247074

FUSION MP GUN, XF3535, FTM624

Graco 247074 Flat Pattern Fusion Mechanical Purge Direct Impingement Gun, 0.024 in (0.61 mm) Orifice Size & Mix Chamber, 0.035 in (0.89 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Direct Impingement
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Direct Impingement (DI)
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .035
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 12-14 in @ 24 in from target
$4,560.00
Picture of Fusion AP Gun, Af2020,ft0438

Fusion AP Gun, Af2020,ft0438

GG 247102

GG 247102

FUSION AP GUN, AF2020, FT0438

Graco 247102 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.020
  • Impingement Port Size (mm): 0.50
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 000 (.020)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 8-10 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af2020,ft0624

Fusion AP Gun, Af2020,ft0624

GG 247103

GG 247103

FUSION AP GUN, AF2020, FT0624

Graco 247103 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.020
  • Impingement Port Size (mm): 0.50
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 000 (.020)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af2020,ft0638

Fusion AP Gun, Af2020,ft0638

GG 247104

GG 247104

FUSION AP GUN, AF2020, FT0638

Graco 247104 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.020
  • Impingement Port Size (mm): 0.50
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 000 (.020)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af2020,ft0838

Fusion AP Gun, Af2020,ft0838

GG 247107

GG 247107

FUSION AP GUN, AF2020, FT0838

Graco 247107 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.020
  • Impingement Port Size (mm): 0.50
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 000 (.020)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 16-18 in @ 24 in from target
$3,940.00
Picture of FUSION AP GUN, AF2020, FT0848

FUSION AP GUN, AF2020, FT0848

GG 247108

GG 247108

FUSION AP GUN, AF2020, FT0848

Flat Pattern Fusion Air-Purge Gun with 0.048 in (1.2 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications. Easy air-blast tip cleaning reduces build-up and tip clogging. Long-lasting side seals means less downtime for maintenance Quick-release fluid housing - lets you easily change the mix chambers without tools Hand-tightened front cap - no tools needed to clean and maintain seals and mix chamber Ergonomic handle
$3,940.00
Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

GG 247114

GG 247114

FUSION AP GUN, AF2929, FT0638

Graco 247114 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.029
  • Impingement Port Size (mm): 0.70
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 00 (.029)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af2929,ft0848

Fusion AP Gun, Af2929,ft0848

GG 247118

GG 247118

FUSION AP GUN, AF2929, FT0848

Graco 247118 Flat Pattern Fusion Air-Purge Gun with 0.048 in (1.2 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.122
  • Fluid Orifice Size (in): 0.048
  • Fluid Orifice Size (mm): 1.22
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.029
  • Impingement Port Size (mm): 0.70
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 00 (.029)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 16-18 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0424

Fusion AP Gun, Af4242,ft0424

GG 247121

GG 247121

FUSION AP GUN, AF4242, FT0424

Graco 247121 Flat Spray Fusion Air-Purge Spray Gun with 0.024 in (0.61 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPT
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Size (cm): 1.42875
  • Component B Inlet Size (in): 9/16
  • Component B Inlet Size (mm): 14.2875
  • Component B Inlet Thread Type: UNF
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.042
  • Impingement Port Size (mm): 1.00
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 01 (.042)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 8-10 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0438

Fusion AP Gun, Af4242,ft0438

GG 247122

GG 247122

FUSION AP GUN, AF4242, FT0438

Graco 247122 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.042 in (1.6 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.042
  • Impingement Port Size (mm): 1.00
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 01 (.042)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 8-10 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0624

Fusion AP Gun, Af4242,ft0624

GG 247123

GG 247123

FUSION AP GUN, AF4242, FT0624

Graco 247123 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.042 in (1.6 mm) Impingement Port

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.042
  • Impingement Port Size (mm): 1.00
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 01 (.042)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0638

Fusion AP Gun, Af4242,ft0638

GG 247124

GG 247124

FUSION AP GUN, AF4242, FT0638

Graco 247124 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.042 in (1.6 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.042
  • Impingement Port Size (mm): 1.00
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 01 (.042)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0838

Fusion AP Gun, Af4242,ft0838

GG 247127

GG 247127

Fusion Ap Gun, Af4242, Ft0838
$3,940.00
Picture of Fusion AP Gun, Af5252,ft0424

Fusion AP Gun, Af5252,ft0424

GG 247131

GG 247131

FUSION AP GUN, AF5252, FT0424

Graco 247131 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.052 in (1.3 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.052
  • Impingement Port Size (mm): 1.30
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 02 (.052)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 8-10 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af4242,ft0848

Fusion AP Gun, Af4242,ft0848

GG 247128

GG 247128

FUSION AP GUN, AF4242, FT0848

Graco 247128 Flat Pattern Fusion Air-Purge Gun with 0.048 in (1.2 mm) Orifice Size and Mix Chamber with 0.042 in (1.6 mm) Impingement Port

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.122
  • Fluid Orifice Size (in): 0.048
  • Fluid Orifice Size (mm): 1.22
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.042
  • Impingement Port Size (mm): 1.00
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 01 (.042)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 16-18 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af5252,ft0438

Fusion AP Gun, Af5252,ft0438

GG 247132

GG 247132

FUSION AP GUN, AF5252, FT0438

Graco 247132 Flat Spray Fusion Air-Purge Spray Gun with 0.038 in (0.96 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPT
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Size (cm): 1.42875
  • Component B Inlet Size (in): 9/16
  • Component B Inlet Size (mm): 14.2875
  • Component B Inlet Thread Type: UNF
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.052
  • Impingement Port Size (mm): 1.30
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 02 (.052)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 8-10 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af5252,ft0624

Fusion AP Gun, Af5252,ft0624

GG 247133

GG 247133

Fusion Ap Gun, Af5252, Ft0624
$3,940.00
Picture of Fusion AP Gun, Af5252,ft0638

Fusion AP Gun, Af5252,ft0638

GG 247134

GG 247134

FUSION AP GUN, AF5252, FT0638

Graco 247134 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.052 in (1.3 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.052
  • Impingement Port Size (mm): 1.30
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 02 (.052)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 12-14 in @ 24 in from target
$3,940.00
Picture of Fusion AP Gun, Af5252,ft0848

Fusion AP Gun, Af5252,ft0848

GG 247138

GG 247138

FUSION AP GUN, AF5252, FT0848

Graco 247138 Flat Pattern Fusion Air-Purge Gun with 0.048 in (1.2 mm) Orifice Size and Mix Chamber with 0.052 in (1.3 mm) Impingement Port

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Ergonomic handle

  • Model: Fusion AP
  • Series: Flat
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
  • Fluid Orifice Size (cm): 0.122
  • Fluid Orifice Size (in): 0.048
  • Fluid Orifice Size (mm): 1.22
  • Gun Type: Air Purge Gun
  • Gun Weight (g): 1130
  • Gun Weight (kg): 1.1
  • Gun Weight (lb): 2.5
  • Gun Weight (oz): 40
  • Impingement Port Size (in): 0.052
  • Impingement Port Size (mm): 1.30
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Chamber: 02 (.052)
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.1
  • Overall Length (in): 7.5
  • Overall Length (mm): 191
  • Overall Width (cm): 8.4
  • Overall Width (in): 3.3
  • Overall Width (mm): 84
  • Pattern Size (in): 18 in @ 24 in from target
$3,940.00
Picture of Reactor Pump, Displ., W/Lube, .396

Reactor Pump, Displ., W/Lube, .396

GG 247144

GG 247144

Reactor Pump, Displ., W/Lube, .396
$1,325.00
Picture of Monark Transfer Pump, 5:1

Monark Transfer Pump, 5:1

GG 247147

GG 247147

Monark Transfer Pump, 5:1
$4,870.00
Picture of Rod, Connecting

Rod, Connecting

GG 247148

GG 247148

Rod, Connecting
$424.00
Picture of Pump, Displ, Recip, 6 Cm, 203 mm, Sst

Pump, Displ, Recip, 6 Cm, 203 mm, Sst

GG 247168

GG 247168

Pump, Displ, Recip, 6 Cm, 203 Mm, Sst
$10,610.00
Picture of REACTOR HEATED HOSE, 3500, W/SCUFF, 1/4X3/8

REACTOR HEATED HOSE, 3500, W/SCUFF, 1/4X3/8

GG 247164

GG 247164

REACTOR HEATED HOSE, 3500, W/SCUFF, 1/4X3/8

50 ft x 1/4 and 3/8 in Heated Hose, 3500 psi, Thermocouple, Mesh Scuff, Reactor 1

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

  • Provides 10-times* the flex life compared to previous flat copper heating element
  • Long-term, even heating without hot spots
  • Backwards compatible with existing Reactor heated hoses
Copper-heated hoses are designed specifically for use with Graco proportioners Covered with proprietary butyl cover for protection against moisture sensitive isocyanate Hoses are covered with foam insulation for heat retention Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings Helix-design whip hose uses braided copper wires for added flexibility and longer life
$4,180.00
Picture of Pump, Recip, Displ 9Cm Sst

Pump, Recip, Displ 9Cm Sst

GG 247190

GG 247190

Pump, Recip, Displ 9Cm Sst
$12,650.00
Picture of Fusion Mp Gun, Mr3535, Rtm055

Fusion Mp Gun, Mr3535, Rtm055

GG 247213

GG 247213

Fusion Mp Gun, Mr3535, Rtm055
$4,560.00
Picture of Fusion Mp Gun, Mr3535, Rtm030

Fusion Mp Gun, Mr3535, Rtm030

GG 247211

GG 247211

FUSION MP GUN, MR3535, RTM030

Graco 247211 Standard Round Spray Fusion Mechanical-Purge Spray Gun

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPT
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2-20
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Size (cm): 1.42875
  • Component B Inlet Size (in): 9/16-18
  • Component B Inlet Size (mm): 14.2875
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Fluid Orifice Size (cm): 0.076
  • Fluid Orifice Size (in): 0.030
  • Fluid Orifice Size (mm): 0.76
  • For Use With: Non-Flammable Foam and Polyurea
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Port Size (in): 0.035
  • Impingement Port Size (mm): 0.89
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Working Pressure (bar): 245
  • Maximum Fluid Working Pressure (MPa): 24.5
  • Maximum Fluid Working Pressure (psi): 3500
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .035
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Product Type: Spray Gun
  • Purge Metho
$4,560.00
Picture of Fusion Mp Gun, Mr4747, Rtm040

Fusion Mp Gun, Mr4747, Rtm040

GG 247218

GG 247218

FUSION MP GUN, MR4747, RTM040

Graco 247218 Round Pattern Fusion Mechanical Purge Gun with 0.040 in (1.0 mm) Orifice Size and Mix Chamber with 0.047 in (1.2 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.102
  • Fluid Orifice Size (in): 0.040
  • Fluid Orifice Size (mm): 1.02
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mr4747, Rtm055

Fusion Mp Gun, Mr4747, Rtm055

GG 247219

GG 247219

FUSION MP GUN, MR4747, RTM055

Graco 247219 Round Pattern Fusion Mechanical Purge Gun with 0.055 in (1.4 mm) Orifice Size and Mix Chamber with 0.047 in (1.2 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.140
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.40
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 9 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mr5757, Rtm055

Fusion Mp Gun, Mr5757, Rtm055

GG 247225

GG 247225

FUSION MP GUN, MR5757, RTM055

Graco 247225 Round Pattern Fusion Mechanical Purge Gun with 0.055 in (1.4 mm) Orifice Size and Mix Chamber with 0.057 in (1.45 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.140
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.40
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mr5757, Rtm070

Fusion Mp Gun, Mr5757, Rtm070

GG 247226

GG 247226

FUSION MP GUN, MR5757, RTM070

Graco 247226 Round Pattern Fusion Mechanical Purge Gun with 0.070 in (1.8 mm) Orifice Size and Mix Chamber with 0.057 in (1.45 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPT
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2-20
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Size (cm): 1.42875
  • Component B Inlet Size (in): 9/16-18
  • Component B Inlet Size (mm): 14.2875
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Fluid Orifice Size (cm): 0.178
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.78
  • For Use With: Non-Flammable Foam and Polyurea
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Port Size (in): 0.057
  • Impingement Port Size (mm): 1.45
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Working Pressure (bar): 245
  • Maximum Fluid Working Pressure (MPa): 24.5
  • Maximum Fluid Working Pressure (psi): 3500
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall W
$4,560.00
Picture of Fusion Mp Gun, Mr6666, Rtm070

Fusion Mp Gun, Mr6666, Rtm070

GG 247231

GG 247231

FUSION MP GUN, MR6666, RTM070

Graco 247231 Round Pattern Fusion Mechanical Purge Gun with 0.070 in (1.8 mm) Orifice Size and Mix Chamber with 0.066 in (1.7 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.178
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.78
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .066
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mr6666, Rtm090

Fusion Mp Gun, Mr6666, Rtm090

GG 247233

GG 247233

Fusion Mp Gun, Mr6666, Rtm090
$4,560.00
Picture of Fusion Mp Gun, Mr8282, Rtm090

Fusion Mp Gun, Mr8282, Rtm090

GG 247239

GG 247239

Fusion Mp Gun, Mr8282, Rtm090
$4,560.00
Picture of Fusion Mp Gun, Mr9494, Rtm110

Fusion Mp Gun, Mr9494, Rtm110

GG 247246

GG 247246

FUSION MP GUN, MR9494, RTM110

Graco 247246 Round Pattern Fusion Mechanical Purge Gun with 0.010 in (0.25 mm) Orifice Size and Mix Chamber with 0.094 in (2.4 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Round
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.279
  • Fluid Orifice Size (in): 0.110
  • Fluid Orifice Size (mm): 2.79
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .094
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 12 in @ 24 in from target
$4,560.00
Fusion Mp Gun, Mf1818,ftm317

Fusion Mp Gun, Mf1818,ftm317

GG 247257

GG 247257

FUSION MP GUN, MF1818, FTM317

Graco 247257 Flat Pattern Fusion Mechanical Purge Gun with 0.017 in (0.43 mm) Orifice Size and Mix Chamber with 0.018 in (0.46 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.043
  • Fluid Orifice Size (in): 0.017
  • Fluid Orifice Size (mm): 0.43
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .018
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 6-8 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mf2929,ftm424

Fusion Mp Gun, Mf2929,ftm424

GG 247265

GG 247265

Fusion Mp Gun, Mf2929, Ftm424
$4,560.00
FUSION MP GUN, MF2929, FTM438

FUSION MP GUN, MF2929, FTM438

GG 247266

GG 247266

FUSION MP GUN, MF2929, FTM438

Flat Pattern Fusion Mechanical Purge Gun with 0.038 in (0.96 mm) Orifice Size and Mix Chamber with 0.029 in (0.74 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

For high output spray polyurethane foam and polyurea applications. Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit Long-lasting PolyCarballoy mix module Advanced mix module and tip provides superior mixing capabilities
$4,560.00
Picture of Fusion Mp Gun, Mf2929,ftm624

Fusion Mp Gun, Mf2929,ftm624

GG 247267

GG 247267

FUSION MP GUN, MF2929, FTM624

Graco 247267 Flat Pattern Fusion Mechanical Purge Gun, 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .029
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 12-14 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mf3535,ftm438

Fusion Mp Gun, Mf3535,ftm438

GG 247273

GG 247273

FUSION MP GUN, MF3535, FTM438

Graco 247273 Flat Pattern Fusion Mechanical Purge Gun with 0.038 in (0.96 mm) Orifice Size and Mix Chamber with 0.038 in (0.96 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .035
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 8-10 in @ 24 in from target
$4,560.00
Fusion Mp Gun, Mf3535,ftm624

Fusion Mp Gun, Mf3535,ftm624

GG 247274

GG 247274

FUSION MP GUN, MF3535, FTM624

Graco 247274 Flat Pattern Fusion Mechanical Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.035 in (0.9 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .035
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 12-14 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mf3535,ftm638

Fusion Mp Gun, Mf3535,ftm638

GG 247275

GG 247275

FUSION MP GUN, MF3535, FTM638

Graco 247275 Flat Pattern Fusion Mechanical Purge Gun with 0.035 in (0.9 mm) Orifice Size and Mix Chamber with 0.035 in (0.9 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .035
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 14 in @ 24 in from target
$4,560.00
Fusion Mp Gun, Mf4747,ftm624

Fusion Mp Gun, Mf4747,ftm624

GG 247281

GG 247281

FUSION MP GUN, MF4747, FTM624

Graco 247281 Flat Pattern Fusion Mechanical Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.047 in (1.2 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.061
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.61
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 12-14 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mf4747,ftm638

Fusion Mp Gun, Mf4747,ftm638

GG 247282

GG 247282

FUSION MP GUN, MF4747, FTM638

Graco 247282 Flat Pattern Fusion Mechanical Purge Gun with 0.038 in (0.96 mm) Orifice Size and Mix Chamber with 0.047 in (1.2 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  • Fluid Orifice Size (cm): 0.097
  • Fluid Orifice Size (in): 0.038
  • Fluid Orifice Size (mm): 0.97
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Flow Rate @ PSI (lb/min): 50
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
  • Pattern Size (in): 14 in @ 24 in from target
$4,560.00
Picture of Fusion Mp Gun, Mf4747,ftm838

Fusion Mp Gun, Mf4747,ftm838

GG 247283

GG 247283

FUSION MP GUN, MF4747, FTM838

Graco 247283 Standard Flat Spray Fusion Mechanical-Purge Spray Gun

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Fluid Orifice Size (in): 0.038
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .047
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mf5757,ftm638

Fusion Mp Gun, Mf5757,ftm638

GG 247289

GG 247289

FUSION MP GUN, MF5757, FTM638

Graco 247289 Standard Flat Spray Fusion Mechanical-Purge Spray Gun

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Fluid Orifice Size (in): 0.038
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mf5757,ftm838

Fusion Mp Gun, Mf5757,ftm838

GG 247290

GG 247290

FUSION MP GUN, MF5757, FTM838

Graco 247290 Flat Pattern Fusion Mechanical Purge Gun with 0.038 in (0.96 mm) Orifice Size and Mix Chamber with 0.057 in (1.45 mm) Impingement Port

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Thread Type: UNF
  • Component Type: Plural-Component
  • Fluid Orifice Size (in): 0.038
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
Picture of Fusion Mp Gun, Mf5757,ftm848

Fusion Mp Gun, Mf5757,ftm848

GG 247291

GG 247291

FUSION MP GUN, MF5757, FTM848

Graco 247291 Standard Flat Spray Fusion Mechanical-Purge Spray Gun

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

  • Model: Fusion MP
  • Series: Flat
  • Compatible Material: Polyurea, Non-Flammable Polyurethane Foam
  • Component A Inlet Size (cm): 1.27
  • Component A Inlet Size (in): 1/2
  • Component A Inlet Size (mm): 12.7
  • Component A Inlet Thread Type: UNF
  • Component B Inlet Thread Type: UNF
  • Fluid Orifice Size (in): 0.048
  • Gun Type: Mechanical-Purge
  • Gun Weight (g): 1315
  • Gun Weight (kg): 1.32
  • Gun Weight (lb): 2.9
  • Gun Weight (oz): 46.4
  • Impingement Type: Standard
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 130
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Maximum Fluid Pressure (bar): 241
  • Maximum Fluid Pressure (kPa): 24100
  • Maximum Fluid Pressure (MPa): 24.1
  • Maximum Fluid Pressure (psi): 3500
  • Maximum Fluid Temperature (°C): 93
  • Maximum Fluid Temperature (°F): 200
  • Minimum Air Inlet Pressure (bar): 5.5
  • Minimum Air Inlet Pressure (kPa): 550
  • Minimum Air Inlet Pressure (MPa): 0.55
  • Minimum Air Inlet Pressure (psi): 80
  • Mix Module: .057
  • Overall Height (cm): 20.6
  • Overall Height (in): 8.1
  • Overall Height (mm): 206
  • Overall Length (cm): 19.3
  • Overall Length (in): 7.6
  • Overall Length (mm): 193
  • Overall Width (cm): 7.9
  • Overall Width (in): 3.1
  • Overall Width (mm): 79
$4,560.00
DURAFLEX HOSE, CPLD, 3/16" X 4'

DURAFLEX HOSE, CPLD, 3/16" X 4'

GG 247338

GG 247338

DURAFLEX HOSE, CPLD, 3/16" X 4'

DuraFlex Whip Hose 3/16 in x 4 ft The small diameter hose creates a flexible connection between the spray gun and the 1/4 inch paint hose for more control when spraying.

The small diameter hose creates a flexible connection between the spray gun and the 1/4 inch paint hose for more control when spraying.

$35.00
Picture of Filter, Cleanline, Wall Mt, Promo

Filter, Cleanline, Wall Mt, Promo

GG 247342

GG 247342

Filter, Cleanline, Wall Mt, Promo
$950.00
Picture of Filter, Cleanline, Pump Mt, Promo

Filter, Cleanline, Pump Mt, Promo

GG 247343

GG 247343

Filter, Cleanline, Pump Mt, Promo
$1,000.00
Picture of Swivel, Straight, 1/2in NPT

Swivel, Straight, 1/2in NPT

GG 247344

GG 247344

Swivel, Straight, 1/2In Npt
$101.50
Picture of Cover, Moisture

Cover, Moisture

GG 247362

GG 247362

Cover, Moisture
$61.25
Picture of Swivel, Straight, 3/4 in NPT

Swivel, Straight, 3/4 in NPT

GG 247345

GG 247345

Swivel, Straight, 3/4In Npt
$155.50
Picture of Kit, Proportioner Pump, 30

Kit, Proportioner Pump, 30

GG 247371

GG 247371

Kit, Proportioner Pump, 30
$6,390.00
Picture of Kit, Proportioner Pump, 48

Kit, Proportioner Pump, 48

GG 247373

GG 247373

Kit, Proportioner Pump, 48
$6,390.00
Picture of Kit, Proportioner Pump, 60

Kit, Proportioner Pump, 60

GG 247374

GG 247374

Kit, Proportioner Pump, 60
$6,390.00
Picture of Kit, Proportioner Pump, 96

Kit, Proportioner Pump, 96

GG 247376

GG 247376

Kit, Proportioner Pump, 96
$6,390.00
Picture of Kit, Repair, Plug, Throat Seal

Kit, Repair, Plug, Throat Seal

GG 247393

GG 247393

Kit, Repair, Plug, Throat Seal
$263.50
Picture of Reciprocator, Hydr Grease Pump

Reciprocator, Hydr Grease Pump

GG 247441

GG 247441

Reciprocator, Hydr Grease Pump
$3,740.00
Picture of DYNA-STAR HYDRAULIC PUMP, GREASE , 120#

DYNA-STAR HYDRAULIC PUMP, GREASE , 120#

GG 247443

GG 247443

DYNA-STAR HYDRAULIC PUMP, GREASE , 120#

Hydraulic Dyna-Star® 10:1 High Ratio Lubrication Pump - 120 lb (55 kg).

Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Electric pumps for heavy duty automatic lubrication and transfer systems. Uses up to 3 times less energy than pneumatic systems Fewer moving parts reduces pump wear and maintenance Self-lubricating for long-life and dependable operations Ultra-quiet hydraulic motor Graco's reciprocator piston minimizes change-over stalls No assembly required, fits in a standard 120 lb (55 kg) grease drum Lighter, more compact design than competition Easy to connect, low-pressure hydraulic input
$5,360.00
Picture of MODULE, PUMP, HYDRAULIC, 120#

MODULE, PUMP, HYDRAULIC, 120#

GG 247444

GG 247444

MODULE, PUMP, HYDRAULIC, 120#

Hydraulic Dyna-Star® 10:1 Pump Module - Injector, 120 lb. Reservoir, Hydraulic Control, Vent Valve

Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.

For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing Convenient pressure and flow control built-in Hydraulic control module-all your controls in one package for easy system setup and maintenance Dyna-Star 10:1 90 lb (41 kg) pump module – injector – overall height 42.75 in (1086 mm)
$9,020.00
Picture of Kit, Repair

Kit, Repair

GG 247455

GG 247455

Kit, Repair
$216.00
DYNA-STAR HYDRAULIC PUMP, GREASE 400#

DYNA-STAR HYDRAULIC PUMP, GREASE 400#

GG 247450

GG 247450

DYNA-STAR HYDRAULIC PUMP, GREASE 400#

Hydraulic Dyna-Star® 10:1 High Ratio Lubrication Pump - 400 lb (180 kg).

Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Electric pumps for heavy duty automatic lubrication and transfer systems. Uses up to 3 times less energy than pneumatic systems Fewer moving parts reduces pump wear and maintenance Self-lubricating for long-life and dependable operations Ultra-quiet hydraulic motor Graco's reciprocator piston minimizes change-over stalls No assembly required, fits in a standard 120 lb (55 kg) grease drum Lighter, more compact design than competition Easy to connect, low-pressure hydraulic input
$5,200.00
Picture of Kit, Suction, Sst, 5 Gl, 1 1/2, Df

Kit, Suction, Sst, 5 Gl, 1 1/2, Df

GG 247475

GG 247475

Kit, Suction, Sst, 5 Gl, 1 1/2, Df
$1,200.00
Picture of Kit, Suction, Sst, Gl, 2, Df

Kit, Suction, Sst, Gl, 2, Df

GG 247477

GG 247477

Kit, Suction, Sst, Gl, 2, Df
$1,310.00
Picture of Kit, Dual Zone Heater, 6.0 Kw

Kit, Dual Zone Heater, 6.0 Kw

GG 247506

GG 247506

Kit, Dual Zone Heater, 6.0 Kw
$3,950.00
Picture of Kit, Dual Zone Heater, 10. 2 Kw

Kit, Dual Zone Heater, 10. 2 Kw

GG 247507

GG 247507

Kit, Dual Zone Heater, 10. 2 Kw
$3,580.00
Picture of Kit, Heater, 7.5Kw, E-Reactor

Kit, Heater, 7.5Kw, E-Reactor

GG 247509

GG 247509

Kit, Heater, 7.5Kw, E-Reactor
$3,940.00
Picture of Kit, Power Cable Harness

Kit, Power Cable Harness

GG 247522

GG 247522

Kit, Power Cable Harness
$308.00
Picture of Kit, Heater Bracket

Kit, Heater Bracket

GG 247523

GG 247523

Kit, Heater Bracket
$99.75
Picture of Kit, Heater Shroud

Kit, Heater Shroud

GG 247524

GG 247524

Kit, Heater Shroud
$799.00
Picture of Hose, Coupled, 40ft

Hose, Coupled, 40ft

GG 247539

GG 247539

Hose, Coupled, 40 Ft
$549.00
Picture of Dyna-Star Hydraulic Pump, Grease

Dyna-Star Hydraulic Pump, Grease

GG 247540

GG 247540

Dyna-Star Hydraulic Pump, Grease
Call for pricing
Picture of Holder, Bottle

Holder, Bottle

GG 247544

GG 247544

Holder, Bottle
$34.30
Picture of HYDRA-CLEAN SYSTEM, 23:1 CART MT

HYDRA-CLEAN SYSTEM, 23:1 CART MT

GG 247551

GG 247551

HYDRA-CLEAN SYSTEM, 23:1 CART MT

Hydra-Clean® 23:1 Cart Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions
$25,010.00
HYDRA-CLEAN SYSTEM, 23:1 WALL MT

HYDRA-CLEAN SYSTEM, 23:1 WALL MT

GG 247552

GG 247552

HYDRA-CLEAN SYSTEM, 23:1 WALL MT

Hydra-Clean® 23:1 Wall Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications Great for high pressure cleaning and sanitizing Fits most pressure, flow and material requirements Use with open-head universal drums Designed to use with cold or hot water up to 180°F (82°C) Spray down portability for use in sanitary applications Supports multiple guns Efficient cleaning with water, detergent or chemical solutions
$22,980.00
Picture of Kit, Fluid Manifold, H_Control

Kit, Fluid Manifold, H_Control

GG 247556

GG 247556

Kit, Fluid Manifold, H_Control
$2,400.00
Picture of Kit, Repair, Visconut 1

Kit, Repair, Visconut 1

GG 247557

GG 247557

Kit, Repair, Visconut 1
$4,430.00
Picture of Kit, Cable, Harness, Pwr, E30/Xp2

Kit, Cable, Harness, Pwr, E30/Xp2

GG 247567

GG 247567

Kit, Cable, Harness, Pwr, E30/Xp2
$298.00
Picture of Kit, Repair, O-Rings

Kit, Repair, O-Rings

GG 247568

GG 247568

Kit, Repair, O-Rings
$13.40
Picture of Bracket, Brake

Bracket, Brake

GG 247571

GG 247571

Bracket, Brake
$348.00
Picture of Kit, Repair, Seal, 6 Pack

Kit, Repair, Seal, 6 Pack

GG 247569

GG 247569

Kit, Repair, Seal, 6 Pack
$488.00
Picture of Pedal, Foot Brake

Pedal, Foot Brake

GG 247572

GG 247572

Pedal, Foot Brake
$101.50
MODULE, PUMP, HYDRAULIC, 60#

MODULE, PUMP, HYDRAULIC, 60#

GG 247574

GG 247574

MODULE, PUMP, HYDRAULIC, 60#

Hydraulic Dyna-Star® 10:1 Pump Module - Injector, 60 lb (27 kg). Reservoir, Hydraulic Control, Vent Valve

Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.

For use with Dyna-Star® 10:1 Off-Road Mobile Lubrication Systems. A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing Convenient pressure and flow control built-in Hydraulic control module - all your controls in one package for easy system setup and maintenance Dyna-Star 10:1 60 lb (27 kg) pump module – injector – overall height 35.15 in (842 mm)
$9,030.00
Picture of Reservoir, 60# Grease

Reservoir, 60# Grease

GG 247575

GG 247575

Reservoir, 60# Grease
$1,515.00
Picture of Kit, Proportioner, 88

Kit, Proportioner, 88

GG 247577

GG 247577

Kit, Proportioner, 88
$6,390.00
Picture of Kit, Seal, Piston, 88

Kit, Seal, Piston, 88

GG 247578

GG 247578

Kit, Seal, Piston, 88
$638.00
Picture of Kit, Seal, Cylinder, 88

Kit, Seal, Cylinder, 88

GG 247580

GG 247580

Kit, Seal, Cylinder, 88
$608.00
Picture of Kit, Cylinder, 88

Kit, Cylinder, 88

GG 247582

GG 247582

Kit, Cylinder, 88
$638.00
Picture of Kit, Piston, 88

Kit, Piston, 88

GG 247584

GG 247584

Kit, Piston, 88
$705.00
Picture of Kit, Adapter, Throat, 88

Kit, Adapter, Throat, 88

GG 247586

GG 247586

Kit, Adapter, Throat, 88
$190.50
Picture of Kit, Activator Plate

Kit, Activator Plate

GG 247607

GG 247607

Kit, Activator Plate
$582.00
Picture of Brake, Adjustable

Brake, Adjustable

GG 247617

GG 247617

Brake, Adjustable
$80.25
Picture of Brake, Adjustable

Brake, Adjustable

GG 247618

GG 247618

Brake, Adjustable
$80.25