GRACO INC. S10595
PH Pump without Reservoir
GG 563393
PH PUMP
Graco 563393 PH Pump without Reservoir
Modular pump and reservoir design plus built-in features enable the PH Manual Pump to be customized for a wide range of applications. The PH Manual Pump permits increased standardization with resultant economies in spare parts stocking and greater employee familiarity with plant or job site lubrication systems. This pump is sturdily built with aluminum and steel components to meet the high standards of performance and quality you expect from Graco products. It is a compact, space-saving unit.
- Built-in volume indicator provides easy verification that lubricant is being delivered to the system and that divider valves are completing lube cycles.
- Interchangeable reservoirs make it convenient to expand or contract the lube distribution system, to switch from oil to grease or from grease to oil - without replacing the entire system.
- Wide applicability is provided by an optional two- or four outlet valve that mounts under the pump outlet. This valve allows the pump to serve up to four different systems or to supply one or two separate manual reversing systems.
- Built-in automatic relief valve protects system components from over-pressure.
- Built-in outlet check valve prevents back pressure from damaging pump and minimizes chance for contaminants to get into the pump or the lube supply.
- 3,000 psi (207 bar) pressure gauge provides a fast check on system status.
- Lubriquip part number 521-800-000
- Model: PH Pump
- Application: In-Plant Machinery, Compressor Equipment
- Compatible Material: Oil, Grease
- Includes: Pump, Reservoir, Gauge, Fittings, Hardware
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Power Type: Manual
XP70-hf Skid System, Hazardous Location, 1:1 Bare, 240V
GG 572102
XP SYSTEM, 1:1, 145/145, BF, CH
Graco 572102 XP70-hf Skid System, Hazardous Location, 1:1 Bare, 240V
Two-component spraying made easy and affordable. The XP-hf system combines the popular XP70 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear. Engineered for more flow capacity, the Graco XP70-hf is great for applications where you want to spray with multiple guns or larger tip sizes. Flexible options for mix ratio, pressure and flow rate - choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That's because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
Application: High-pressure performance for two-part high-solids coatings.- Reduced material waste
- No more throwing away unused mixed material at the end of the day
- Save money by using less clean-up solvent
- Easy to operate - minimal training required
- Reduced maintenance costs
- Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths
- Series: XP70-hf
- Air Inlet Size (in): 1
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic Airless, Manual Airless
- Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents
- Component Type: Plural-Component
- Configuration: Bare
- Fluid Inlet Size (in): 1-1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Flush Type: Solvent
- Hose Length (ft): 35
- Hose Length (m): 10.7
- Includes: 7 Gallon Hoppers, XTR+ Gun, 35 ft integration Hose and Static Mixer
- Location Category: Hazardous Location
- Material Application: Coatings, Paints, Primers
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (MPa): 0.69
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 40
- Maximum Flow Rate (cc/min): 11360
- Maximum Flow Rate (GPM): 3
- Maximum Flow Rate (L/min): 11.36
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Hose Length (ft): 300
- Maximum Hose Length (m): 91.4
- Maximum Operating Temperature ( degree C): 54
- Maximum Operating Temperature ( degree F): 130
- Maximum Spray Pressure (bar): 500
- Maximum Spray Pressure (kPa): 50000
- Maximum Spray Pressure (MPa): 50
- Maximum Spray Pressure (psi): 7250
- Maximum Working Pressure (bar): 490
- Maximum Working Pressure (kPa): 49000
- Maximum Working Pressure (MPa): 49
- Maximum Worki
Check Valve, 1/2npt, F, 45psi, HC
GG 94/0351-2/50
Check Valve, 1/2npt, F, 45psi, HC
Check Valve, 1/2Npt, Vit, Ss, Adj, 50-150
GG 94/0360-2/98
Check Valve, 1/2Npt, Vit, Ss, Adj, 50-150
Fitting, Bushing, 1/8Nptx10-32, Brs
GG 94/0463/96
Fitting, Bushing, 1/8Nptx10-32, Brs
Regulator, Electro/ Pneumatic, 3/8 In.
GG 17G386
Regulator, Electro/ Pneumatic, 3/8 In.
Payment options
