GRACO INC. S10595

GG 195098

Label, Instruction (English)

GG 195099

Cover Access

GG 195108

Tube Drain

GG 195126

Housing, Pump

GG 195129

Gland, Male, Piston

GG 195131

Valve, Piston

GG 195132

Seat, Footvalve, Carbide

GG 195133

Valve, Intake

GG 195134

Spacer, Ball, Guide

GG 195136

O-Ring, Special

GG 195139

Cap, Filter

GG 195157

Housing, Filter

GG 195173

Filter, Fluid

GG 195177

Holder, Tsl And Suction

GG 195196

Yoke

GG 195197

Rod, Threaded

GG 195214

Piston, Priming

GG 195216

Rod, Connecting

GG 195229

Housing, Primer

GG 195230

Insert, Fluid Machined

GG 195265

Control Box, Cycleflo Ii

GG 195367

Spacer

GG 195384

ADAPTER, INLET, GUN

Gun Inlet Adapter Adapter Fitting Graco's dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Use Genuine Graco parts for the longest life, highest performance and best productivity. Gun Inlet Adapter Fitting

GG 195395

Cap, End

GG 195400

Clip Spring

GG 195419

Housing, Needle

GG 195426

Stem, Deflector

GG 195428

Boot, Toggle

GG 195435

Handle, Cart

GG 195436

Frame, Cart

GG 195442

Cover, Sprocket

GG 195474

Tag, Tips, Big Rig

GG 195495

Guard, Trigger

GG 195523

Pin, Pump

GG 195516

Spacer

GG 195548

Nut, Jam, Pump

GG 195550

Latch, Adjustable

GG 195551

Retainer Adapter, Cord

GG 195574

Manifold 1590 Bspt Sst Inlet

GG 195576

Manifold, 2150 Bspt Sst Inlet

GG 195575

Manifold, 1590 Bspt Sst Outlet

GG 195577

Manifold, Outlet (2150) Bspt

GG 195610

Adapter, Seat, 1/4-18 Npt

GG 195612

Guard, Trigger

GG 195625

Cylinder, Hydraulic

GG 195693

Trigger, Gun

GG 195696

Clip, Spring

GG 195707

Label, Identification

GG 195764

Kit, Accessory

GG 195766

Wheel, Semi Pneumatic

GG 195883

Tube, Suction

GG 195889

Bushing, Strain Relief

GG 195918

Cover, Air, Metered

GG 195919

Cover, 2150 Alum. Metered Air

GG 195921

Housing, Center Remote

GG 195935

Housing, Regulator

GG 195927

Housing, Intake

GG 195953

Housing, Suction

GG 195957

Nozzle, 45 Degree Fluid

GG 196001

Washer

GG 196018

Cap, Air Cylinder Lasd

GG 196037

Housing, Lower

GG 196038

Guard, Nozzle

GG 196039

Retainer, Bellows (Accessory)

GG 196051

Spacer

GG 196052

Spacer

GG 196053

Plate

GG 196065

Tube, Grease, Open Gear

GG 196072

Adapter, Ring

GG 196073

Clamp

GG 196103

Gasket

GG 196109

Air Cap, Specking

GG 196142

Fitting, Adapter, 1/2Npt X3/4

GG 196146

Retainer Clip

GG 19X014

SOLOTECH ST10 PUMP, I10-LN-EP-PV-A1-A1-0

Graco 19X014 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.08

• Gear Ratio: 157.43:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.013

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Low Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 42
• Overall Height (in): 16.7
• Overall Height (mm): 424
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 2-11

GG 19X016

SOLOTECH ST10 PUMP, I10-LN-BN-SS-A1-A1-0

Graco 19X016 SoloTech i10 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.08

• Gear Ratio: 157.43:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Nitrile

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.013

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Low Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 42
• Overall Height (in): 16.7
• Overall Height (mm): 424
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 2-11

GG 19X017

SOLOTECH ST10 PUMP, I10, HC-NR-SS-A1-A1-0

SoloTech™ i10 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X018

SOLOTECH ST10 PUMP, I10, HC-CS-SS-A1-A1-0

SoloTech™ i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X019

SOLOTECH ST10 PUMP, I10, HC-CS-PV-A1-A1-0

Graco 19X019 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.646

• Gear Ratio: 19.13:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X020

SOLOTECH ST10 PUMP, I10, HC-CS-HS-A1-A1-0

Graco 19X020 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.646

• Gear Ratio: 19.13:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X021

SOLOTECH ST10 PUMP, I10, HC-BN-SS-A1-A1-0

Graco 19X021 SoloTech i10 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.646

• Gear Ratio: 19.13:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Nitrile

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X022

SOLOTECH ST10 PUMP, I10-HC-EP-SS-A1-A1-0

SoloTech™ i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X023

Solotech St10 Pump, I10-Hc-Ep-Pv-A1-A1-0

GG 19X024

SOLOTECH ST10 PUMP, I10-HC-EP-HS-A1-A1-0

Graco 19X024 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.646

• Gear Ratio: 19.13:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X025

SOLOTECH ST10 PUMP, I10-HN-NR-SS-A1-A1-0

Graco 19X025 SoloTech i10 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Rubber

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X026

SOLOTECH ST10 PUMP, I10-HN-CS-SS-A1-A1-0

SoloTech™ i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X027

SOLOTECH ST10 PUMP, I10-HN-CS-PV-A1-A1-0

Graco 19X027 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X028

SOLOTECH ST10 PUMP, I10-HN-CS-HS-A1-A1-0

Graco 19X028 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X029

SOLOTECH ST10 PUMP, I10-HN-EP-SS-A1-A1-0

SoloTech™ i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X030

SOLOTECH ST10 PUMP, I10-HN-EP-PV-A1-A1-0

Graco 19X030 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X031

SOLOTECH ST10 PUMP, I10-HN-EP-HS-A1-A1-0

Graco 19X031 SoloTech i10 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X032

SOLOTECH ST10 PUMP, I10-HN-BN-SS-A1-A1-0

Graco 19X032 SoloTech i10 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & NEMA Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.646

• Gear Ratio: 18.24:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Nitrile

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.108

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: High Speed, NEMA Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 46
• Overall Height (in): 18.2
• Overall Height (mm): 462
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 15-92

GG 19X033

SOLOTECH ST10 PUMP, I10-MC-NR-SS-A1-A1-0

Graco 19X033 SoloTech i10 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Rubber

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X034

SOLOTECH ST10 PUMP, I10-MC-CS-SS-A1-A1-0

Graco 19X034 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X035

SOLOTECH ST10 PUMP, I10-MC-CS-PV-A1-A1-0

Graco 19X035 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X036

SOLOTECH ST10 PUMP, I10-MC-CS-HS-A1-A1-0

Graco 19X036 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: CSM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X037

SOLOTECH ST10 PUMP, I10-MC-BN-SS-A1-A1-0

Graco 19X037 SoloTech i10 Mid Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Stainless Steel

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: Nitrile

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X038

SOLOTECH ST10 PUMP, I10-MC-EP-SS-A1-A1-0

SoloTech™ i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

GG 19X039

SOLOTECH ST10 PUMP, I10-MC-EP-PV-A1-A1-0

Graco 19X039 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: PVDF

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38

GG 19X040

SOLOTECH ST10 PUMP, I10-MC-EP-HS-A1-A1-0

Graco 19X040 SoloTech i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & IEC Connection

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer

• More flow per revolution than conventional designs
• Inexpensive to maintain - no valves, seals or glands
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: i10

• Application: Industrial

• Barb Material: Hastelloy

• Flow Rate (GPM): 0.2625

• Gear Ratio: 48:1

• Hose Diameter (cm): 1
• Hose Diameter (in): 0.4
• Hose Diameter (mm): 10
• Hose Material: EPDM

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 0.95
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.5

• Inlet Thread Type: Flange

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.5

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 9
• Maximum Fluid Pressure (kPa): 900
• Maximum Fluid Pressure (psi): 125

• Maximum Storage Temperature (°C): 40
• Maximum Storage Temperature (°F): 104

• Minimum Flow Rate (GPM): 0.044

• Minimum Storage Temperature (°C): -10
• Minimum Storage Temperature (°F): 14

• Motor Type: Mid Speed, IEC Gearbox Only

• Outlet Size (cm): 9
• Outlet Size (in): 3.54
• Outlet Size (mm): 90

• Overall Height (cm): 44
• Overall Height (in): 17.3
• Overall Height (mm): 439
• Overall Length (cm): 41
• Overall Length (in): 16.2
• Overall Length (mm): 411
• Overall Width (cm): 33
• Overall Width (in): 13
• Overall Width (mm): 330

• Pump Speed (RPM): 6-38