GRACO INC. S10595
GRACO INC. S10595 branded products
APPLICATOR, TAPELAZER
GG 20A024
GG 20A024
APPLICATOR, TAPELAZER
TapeLazer HP Automatic Series Traffic Tape Applicator The Graco TapeLazer is a fully-automatic, walk/ride-behind, gas-powered traffic tape applicator that includes key features from our renowned LineLazer V HP Automatic stripers for fast, easy taping applications. Include the Graco patented LineDriver to maximize productivity on every application. Apply permanent or temporary tape up to 14 inch wide, at truck speeds, within 3 inches of a road edge while being able to cut tape on-the-fly with the push of a button. Apply double lines in a single pass and pre-program skips with no layout required. On-surface & deep inlay groove applications. HP Automatic System- Push button tape application
- Start/Stop with the push of a button
- Put down skip lines with ease using the built-in Automatic mode
- System Delay for accurate starts/stops
- Consistent, quality results
- Non-stick design — single blade cuts on non-adhesive side of the blade — no oiler needed
- Exclusive 2-stage cutting process delivers the best possible adhesion
- Fast, easy adjustments
- Slide tape carriage right or left to get within 3 inches of road edge
- Keeps you safe — out of traffic
- Fast tape loading
- Tool-less locator collars for quick/easy change-out
- Tape Bar Guide Mark System allows for quick and easy tape alignment resulting in straighter lines
- Superior tape adhesion
- Non-stick silicone eliminates primer build-up
- Segmented design allows roller width to match tape width for optimal tamp on all applications
- Trouble-free cutting
- Single blade cuts on the non-adhesive side of the tape eliminating adhesive buildup and the need for an oiler
- Less downtime
- Swap out the blade in seconds — keeps you up and running on the job
- Debris-free design
- Exclusive design keeps the front tires and debris out of the primer — resulting in better adhesion
$52,750.00
Spring, And Button, Assembly, 60V Dewalt
GG 20A052
GG 20A052
Spring, And Button, Asy, 60V Dewalt $15.90
EXTENSION, TELESCOPING
GG 218775
GG 218775
EXTENSION, TELESCOPING
Telescoping Extension, 18 to 36 in (46 to 91 cm) Extend your reach from 18 inches up to 36 inches (46 to 91 cm) with the Telescoping Extension. For use with the Pressure Rollers only, not for airless spraying. Use Telescoping Extensions for Pressure Rolling only - do not use for airless spraying All Telescoping Extensions include Adapter 244825; for use with 22 mm (7/8 in) Contractor In-Line Valve Included $246.00
EXTENSION, TELESCOPING, 3-6'
GG 218776
GG 218776
EXTENSION, TELESCOPING, 3-6'
Adjustable Extension Tube, 36-72 in For use with Pressure Rolling onlyTelescoping Extensions
$290.00
EXTENSION, TELESCOPING, 6-12'
GG 218777
GG 218777
EXTENSION, TELESCOPING, 6-12'
Adjustable Extension Tube, 6-12in For use with Pressure Rolling onlyTelescoping Extensions
$563.00
Pan, Drain, Rolling
GG 218969
GG 218969
PAN, DRAIN, ROLLING
Graco 218969 Track Receiver for Car and Truck Fast Lube Facilities
Specially designed for car and truck fast-lube facilities where speed and mobility are important.
- Adjustable steel rollers fit track widths of 39 in (99 cm) to 46 inches (117 cm), with a minimum running width of 2-1/2 in (63.5 mm).
- Front and rear drain fittings allow use of two drains on a single track, permitting two receivers to be drained simultaneously.
- Unit includes 30 gal (114 liter) steel tank, 1-1/2 NPT drain valve (108204), 1-1/2 NPT quick coupler (108202) and 1-1/2 NPT coupler cap.
- Compatible Fluid: Oil
- Includes: Steel Tank, Fittings
- Overall Height (cm): 27.94
- Overall Height (ft): 0.92
- Overall Height (in): 11
- Overall Height (m): 0.28
- Overall Height (mm): 279.4
- Overall Length (cm): 84
- Overall Length (ft): 2.75
- Overall Length (in): 33
- Overall Length (m): 0.84
- Overall Length (mm): 838.2
- Overall Width (cm): 60.96
- Overall Width (ft): 2
- Overall Width (in): 24
- Overall Width (m): 0.61
- Overall Width (mm): 609.6
$2,030.00
KIT, 200MESHFILTER, FFLP106 TIP
GG 21A106
GG 21A106
KIT, 200MESHFILTER, FFLP106 TIP
RAC X FF LP 106 Control Spray Starter Kit Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 106 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. Also, using an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Includes RAC X FF LP 106 SwitchTip, and 200 mesh gun and manifold filters delivering a complete solution for jobs requiring ultimate control. Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fann pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$98.50
KIT, 200MESHFILTER, FFLP206 TIP
GG 21A206
GG 21A206
KIT, 200MESHFILTER, FFLP206 TIP
RAC X FF LP 206 Control Spray Starter Kit Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 206 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. Also, using an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Includes RAC X FF LP 206 SwitchTip, and 200 mesh gun and manifold filters delivering a complete solution for jobs requiring ultimate control. Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fann pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$98.50
DISPENSER
GG 220107
GG 220107
DISPENSER
Oil Dispense Bar - Up to 3 Dispense Taps and Optional MetersModular convenient design allows up to 2 oil dispense taps or 3 meters to be added at the time of installation, or later if required.
Tough metal cabinet with baked-on enamel finish. Constructed with single-dispense tap and waste pan with plated, perforated metal service area and drain connection. $1,715.00
KIT, VALVE, DISPENSER
GG 220112
GG 220112
KIT, VALVE, DISPENSER
Dispenser Valve Kit for Adding Additional Dispense Valves toModular Oil Dispense BarAdd additional dispense points to dispense bar.
Typical applications include automotive and heavy-duty dealerships, mining, service and fast lube centers, fleet service facilities, in-plant, and mining. $700.00
Solotech St10 Pump, I10-Mac-Cs-Ss-A1-A1-0
GG 19Z018
GG 19Z018
SOLOTECH ST10 PUMP, I10-MAC-CS-SS-A1-A1-0
Graco 19Z018 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & AC Motor
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.2625
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.044
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Mid Speed AC
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Pump Speed (RPM): 6-38
$6,550.00
SOLOTECH ST10 PUMP, I10-MAC-CS-PV-A1-A1-0
GG 19Z019
GG 19Z019
SOLOTECH ST10 PUMP, I10-MAC-CS-PV-A1-A1-0
SoloTech™ i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC MotorGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,780.00
SOLOTECH ST10 PUMP, I10-MAC-EP-SS-A1-A1-0
GG 19Z022
GG 19Z022
SOLOTECH ST10 PUMP, I10-MAC-EP-SS-A1-A1-0
SoloTech™ i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC MotorGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,400.00
SOLOTECH ST10 PUMP, I10-MAC-EP-PV-A1-A1-0
GG 19Z023
GG 19Z023
SOLOTECH ST10 PUMP, I10-MAC-EP-PV-A1-A1-0
SoloTech™ i10 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & AC MotorGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution $6,620.00