GRACO INC. S10595

GG HH7332Z

HOSE, HTD, 3/8X3/8, R, 200FT, 7250

Graco HH7332Z Electric Heated Hose, 7250 psi (500 bar), 3/8 in. x 3/8 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 200
• Hose Length (m): 60

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH75215

HOSE, HTD, 1/2X1/4, 50FT, 7250PSI

Graco HH75215 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 50 ft (15 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7521X

HOSE, HTD, 1/2X1/4, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7521Y

HOSE, HTD, 1/2X1/4, 150FT, 7250PSI

Graco HH7521Y Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 150 ft (45 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 150
• Hose Length (m): 45

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7521Z

HOSE, HTD, 1/2X1/4, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH75225

HOSE, HTD, 1/2X1/4, R, 50FT, 7250

Graco HH75225 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 50 ft (15 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 50
• Hose Length (m): 15

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7522X

HOSE, HTD, 1/2X1/4, R, 100FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7522Y

HOSE, HTD, 1/2X1/4, R, 150FT, 7250

Graco HH7522Y Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 150 ft (45 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 150
• Hose Length (m): 45

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7522Z

HOSE, HTD, 1/2X1/4, R, 200FT, 7250

Graco HH7522Z Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/4 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 200
• Hose Length (m): 60

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH75315

HOSE, HTD, 1/2X3/8, 50FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 50 ft (15 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7531X

HOSE, HTD, 1/2X3/8, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7531Y

HOSE, HTD, 1/2X3/8, 150FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7531Z

HOSE, HTD, 1/2X3/8, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH75325

HOSE, HTD, 1/2X3/8, R, 50FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 50 ft (15 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7532X

HOSE, HTD, 1/2X3/8, R, 100FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7532Y

HOSE, HTD, 1/2X3/8, R, 150FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 150 ft (45 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7532Z

HOSE, HTD, 1/2X3/8, R, 200FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in., 200 ft (60 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH75335

HOSE, HTD, 1/2X3/8X1/4, 50FT

Graco HH75335 Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 50 ft (15 m)

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 50
• Hose Length (m): 15

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7533X

HOSE, HTD, 1/2X3/8X1/4, 100FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7533Y

HOSE, HTD, 1/2X3/8X1/4, 150FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7533Z

HOSE, HTD, 1/2X3/8X1/4, 200FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH75345

HOSE, HTD, 1/2X3/8X1/4, R, 50FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 50 ft (15 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7534X

HOSE, HTD, 1/2X3/8X1/4, R, 100FT

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 100 ft (30m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7534Y

Hose, Htd, 1/2X3/8X1/4, R, 150Ft

GG HH7534Z

HOSE, HTD, 1/2X3/8X1/4, R, 200FT

Graco HH7534Z Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 3/8 in. x 1/4 in., 200 ft (60 m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 200
• Hose Length (m): 60

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH75515

HOSE, HTD, 1/2X1/2, 50FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 50 ft (15 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7551X

HOSE, HTD, 1/2X1/2, 100FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 100 ft (30m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7551Y

HOSE, HTD, 1/2X1/2, 150FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 150 ft (45 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7551Z

HOSE, HTD, 1/2X1/2, 200FT, 7250PSI

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 200 ft (60 m) Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH75525

HOSE, HTD, 1/2X1/2, R, 50FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 50 ft (15 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HH7552X

HOSE, HTD, 1/2X1/2, R, 100FT, 7250

Graco HH7552X Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 100 ft (30m), Recirculation Hose

Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers.

Application: Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold.

• No vertical height limitations
• 7,250 psi (500 bar) pressure rating
• Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m)
• Integrated recirculation hoses available
• Multiple A/B hose diameters available to achieve the desired chemical mix ratio
• Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort
• Easily install on new or existing Graco XM or XP sprayers
• Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

• For Use With: Plural Component Sprayers

• Hose Heating Type: Electric
• Hose Length (ft): 100
• Hose Length (m): 30

• Includes: Recirculation Hoses

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (psi): 7250

GG HH7552Y

Hose, Htd, 1/2X1/2, R, 150Ft, 7250

GG HH7552Z

HOSE, HTD, 1/2X1/2, R, 200FT, 7250

Electric Heated Hose, 7250 psi (500 bar), 1/2 in. x 1/2 in., 200 ft (60 m), Recirculation Hose Electric heated hoses are designed for use with plural component high-pressure airless equipment, such as the Graco XP and XM sprayers. Electric heat is the lightest and most effective way to maintain temperature between the primary heaters on an XM or XP sprayer and a remote mix manifold. No vertical height limitations 7,250 psi (500 bar) pressure rating Continuous hose lengths available - 50ft (15m), 100ft (30m), 150ft (45m), 200ft (60m) Lightweight hose bundle - no water! Integrated recirculation hoses available Multiple A/B hose diameters available to achieve the desired chemical mix ratio Additional B hose optional to adapt to multiple chemical mix ratios with minimal effort Easily install on new or existing Graco XM or XP sprayers Hose temperature control and recirculation accessory kits for Graco XM and XP sprayers available

GG HK-9500

Kit, Repair, Heater

GG HK-9500-40W

Kit, Repair, Htr, Blk, 40W

GG HK-9500-CU-40W

Kit, Repair, Htr Blk, Cu, 40W

GG HK-9500-INT

Kit, Repair, Htr Blk

GG HNHB7B

Xd Series 30 Reel, 3/8 X 75, Grease, Blue

GG HNHB7F

Xd Series 30 Reel, 3/8 X 75, Grease, Yellow

GG HNHCDB

Xd Series 30 Reel, 1/2 X Bare, Grease, Blue

GG HNHCDF

Xd Series 30 Reel, 1/2 X Bare, Grease, Yellow

GG HNHFFF

Xd Series 30 Reel, 3/8 X Bare, P/W, Yellow

GG HNLC8B

Xd Series 30 Reel, 1/2 X 75, A/W, Blue

GG HNLD5B

Xd Series 30 Reel, 3/4 X 50, A/W, Blue

GG HNLE3F

Xd Series 30 Reel, 1 X 30, Fuel/Evac, Yellow

GG HNMC8B

Xd Series 30 Reel, 1/2 X 75, Oil, Blue

GG HNMD5B

Xd Series 30 Reel, 3/4 X 50, Oil, Blue

GG HNMD5F

Xd Series 30 Reel, 3/4 X 50, Oil, Yellow

GG HNMDDB

Xd Series 30 Reel, 3/4 X Bare, Oil, Blue

GG HNMDDF

Xd Series 30 Reel, 3/4 X Bare, Oil, Yellow

GG HNPB8B

Xd Series 30 Reel, 3/8 X 75, P/W, Blue

GG HNPB8F

Xd Series 30 Reel, 3/8 X 75, P/W, Yellow

GG HSDD5F

XD SERIES 30 REEL, HOSE, 3/4 X 50, DEF, YELLOW

XD30™, DEF, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Yellow Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSDDDF

XD SERIES 30 REEL, HOSE, BARE, DEF, YELLOW

XD30™, DEF, 3/4 in. (19 mm) Inlet, Bare Reel (3/4 in. X 50 ft. (19 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Yellow Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSE3163

Hose, Whip, 3/16In X 3'

GG HSE3165

Hose, Whip, 3/16In X 5'

GG HSE3850

Hose, 3/8In X 50'

GG HSHB7D

Xd Series 30 Reel, 3/8 X 75, Grease, Black

GG HSHB7F

XD SERIES 30 REEL, 3/8 X 75, GREASE, YELLOW

XD30™, Grease, 1/2 in. (13 mm) Inlet, 3/8 in. X 75 ft. (10 mm X 23 m) Hose, NPT, Truck/Bench Mount, Yellow Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSHC5D

Xd Series 30 Reel, 1/2 X 50, Grease, Black

GG HSHC5F

XD SERIES 30 REEL, 1/2 X 50, GREASE, YELLOW

XD30™, Grease, 1/2 in. (13 mm) Inlet, 1/2 in. X 50 ft. (13 mm X 15 m) Hose, NPT, Truck/Bench Mount, Yellow Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSHCDB

XD SERIES 30 REEL, 1/2 X BARE, GREASE, BLUE

XD30™, Grease, 1/2 in. (13 mm) Inlet, Bare Reel (1/2 in. X 50 ft. (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSHCDD

Xd Series 30 Reel, 1/2 X Bare, Grease, Black

GG HSHCDF

XD SERIES 30 REEL, 1/2 X BARE, GREASE, YELLOW

XD30™, Grease, 1/2 in. (13 mm) Inlet, Bare Reel (1/2 in. X 50 ft. (13 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Yellow Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

GG HSHFFD

Xd Series 30 Reel, 3/8 X Bare, P/W, Black

GG HE80-0150

Quantm Pump, Qhd-Phff1Ssptpsepssa0021

GG HE80-0172

Quantm Pump, Qhd-Phff1Ssfkfkfkssa0031

GG HE80-0173

Quantm Pump, Qhd-Phff1Ssptpoepssa0031

GG HE80-0194

QUANTM PUMP, QHD-HSFF1FL--SPEPSSASF21

QUANTM h80, 1.5"Tri-clamp, HS SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, FL Seat, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and NEMA L15-20plug
• Non-hazardous

Materials of Construction

• 32 Ra surface finish 316L stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, 316L stainless steel Flapper ball, Santoprene diaphragm and EPDM manifold o-ring
• EN 2.1 material certification

GG HE80-0193

Quantm Pump, Qhd-Hsff1Fl--Psepssasf21

GG HE80-0149

Quantm Pump, Qhd-Phff1Ssptpoepssa0021

GG HE80-0177

Quantm Pump, Qhd-Phff1Ssepeoepssa0031

GG HE80-0176

Quantm Pump, Qhd-Phff1Ssbnbnbnssa0031

GG HE80-0175

Quantm Pump, Qhd-Phff1Ssspspepssa0031

GG HE80-0174

Quantm Pump, Qhd-Phff1Ssptpsepssa0031

GG HE80-0224

QUANTM PUMP, QHD-FGFF2SSFKFKFKS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, FK Ball, FK Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, FKM (Viton) ball, FKM (Viton) diaphragm and FKM (Viton) manifold o-ring
• EN 2.1 material certification

GG HE80-0196

Quantm Pump, Qhd-Hsff1Fl--Fkfkssasf21

GG HE80-0221

QUANTM PUMP, QHD-FGFF2SSCWPSPTS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, CW Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, polychloroprene weighted ball, PTFE/Santoprene 2-Piece diaphragm and PTFE manifold o-ring
• EN 2.1 material certification

GG HE80-0220

Quantm Pump, Qhd-Fgff2Sscwpopts130021

GG HE80-0208

Quantm Pump, Qhd-Hsff1Fl--Spepssasf31

GG HE80-0081

Quantm Pump, Qhd-Hsff1Ssepeoepssa0031

GG HE80-0207

Quantm Pump, Qhd-Hsff1Fl--Psepssasf31

GG HE80-0206

Quantm Pump, Qhd-Hsff1Fl--Poepssasf31

GG HE80-0225

QUANTM PUMP, QHD-FGFF2SSPTPOPTS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring
• EN 2.1 material certification

GG HE80-0226

QUANTM PUMP, QHD-FGFF2SSPTPSPTS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, PTFE ball, PTFE/Santoprene 2-Piece diaphragm and PTFE manifold o-ring
• EN 2.1 material certification

GG HE80-0227

QUANTM PUMP, QHD-FGFF2SSSPSPEPS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, SP Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, Santoprene ball, Santoprene diaphragm and EPDM manifold o-ring
• EN 2.1 material certification

GG HE80-0228

Quantm Pump, Qhd-Fgff2Ssbnbneps130021

GG HE80-0229

QUANTM PUMP, QHD-FGFF2SSEPEOEPS130021

QUANTM h80, 1.5" FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, EP Ball, EO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
• Internal components include 316L stainless steel seat, EPDM ball, EPDM overmold diaphragm and EPDM manifold o-ring
• EN 2.1 material certification

GG HE80-0232

Quantm Pump, Qhd-Fgff2Sscwpopts140021

GG HE80-0233

Quantm Pump, Qhd-Fgff2Sscwpspts140021

GG HE80-0236

Quantm Pump, Qhd-Fgff2Ssfkfkfks140021

GG HE80-0239

Quantm Pump, Qhd-Fgff2Ssspspeps140021

GG HE80-0241

Quantm Pump, Qhd-Fgff2Ssepeoeps140021

GG HE80-0240

Quantm Pump, Qhd-Fgff2Ssbnbneps140021

GG HE80-0237

QUANTM PUMP, QHD-FGFF2SSPTPOPTS140021

QUANTM h80, 1.5"Hygienic DIN, FG SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework. Revolutionary Design

• Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
• Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
• Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
• Quiet operation reduces plant noise and improves employee safety and health
• Smart pump control provides more accurate flow set points and built-in I/O

Efficient Electric Motor

• FEP coated aluminum electric drive
• 240 VAC 1Ph motor with 15 ft cord and IEC 60320-C20plug
• Non-hazardous

Materials of Construction

• 125 Ra surface finish 316 stainless steel fluid section with hygienic DIN center port
• Internal components include 316L stainless steel seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring
• EN 2.1 material certification

GG HE80-0244

Quantm Pump, Qhd-Fgff2Sscwpopts130031

GG HE80-0245

Quantm Pump, Qhd-Fgff2Sscwpspts130031

GG HE80-0252

Quantm Pump, Qhd-Fgff2Ssbnbneps130031

GG HE80-0251

Quantm Pump, Qhd-Fgff2Ssspspeps130031

GG HE80-0248

Quantm Pump, Qhd-Fgff2Ssfkfkfks130031