GRACO INC. S10595
Seal Kit, Pump, 50 Series, 1 In. Tef/EP
GG 02/0956-04/25
Seal Kit, Pump, 50 Series, 1 In. Tef/EPAdapter, Ext. Pipe, 37 Dg, Flre, 1-1/4
GG 120262
Adapter, Ext. Pipe, 37 Dg, Flre, 1-1/4Fitting, Adp, 04Jicx1/4Npt, Mm, Ss, 6K
GG 124961
Fitting, Adp, 04Jicx1/4Npt, Mm, Ss, 6KMODULE, STACK, LG MXR
GG 25A995
MODULE, STACK, LG MXR
Straight Thread Single Pass Mixing Stack Material check valve onlyStraight Thread Single-Pass Mixing Stack designed for Graco F-5 two-component LSR equipment.
Reduce downtime and increase production with mixing stacks.
Easier to clean + assemble
No tapered national pipe thread (NPT) threads and regulator and mixer enhancements for greater clearance. Reduces cleaning time by 50 percent so you can spend more time producing parts.
Reduce pressure drops
High-flow material passages on the regulator are 225% larger which reduces pressure drops through the barrel stack.
Reduced thread galling + easier reassembly
Stackable plastic molded mixers with improved housing and mixer tolerances prevent common side-walling problems. Mixer life is increase by elimination breakage caused by repeated removal and installation. Plastic mixers can be cleaned or disposed and replaced.
Airpro Gun, EFX, LVMP, .051, Rnd.
GG 24B891
Airpro Gun, EFX, LVMP, .051, Rnd.
AirPro EFX Auto Air Spray Gun, Direct Connect, LVMP, 0.051 inch (1.3 mm) Nozzle, SST Tip, Indexing Fluid Adjust Knob The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications. Aircaps and nozzles deliver superior, precision spray performance Precision fluid adjustment with a micrometer-telescoping knob High wear components designed for abrasive materials Excellent fluid flow rate stability and repeatabilityE-FLO PUMP, 1HP, 750, BSC, TRI, SLD, STND
GG EC1A41
E-FLO PUMP, 1HP, 750, BSC, TRI, SLD, STND
E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Basic, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand E-Flo DC (Dual Control) electric circulating pumps are up to five times more efficient than comparable pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation, increases flow rates and decreases downtime. Basic model has simple control knobs to easily adjust pump settings. Integrated runaway protection prevents pump from premature wear and costly material loss. Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne. Meets requirements of these approval agencies: ATEX, FM, IECEx Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second.E-Flo Pump, 1Hp, 750, Bsc, Tri, Sld, Wall
GG EC1A42
E-Flo Pump, 1Hp, 750, Bsc, Tri, Sld, WallE-Flo Pump, 1Hp, 750, Bsc, NPT, Opn
GG EC1A50
E-FLO PUMP, 1HP, 750, BSC, NPT, OPN
Graco EC1A50 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Basic, ATEX/FM/IECEx, Open Wet Cup Lower, Ultralife Rod/Cylinder, NPT
E-Flo DC (Dual Control) electric circulating pumps are up to five times more efficient than comparable pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation, increases flow rates and decreases downtime.
- Basic model has simple control knobs to easily adjust pump settings.
- Quiet electric motor exceeds OSHA sound regulations, meaning happier operators and better results.
- Open wet cup lower includes Ultralife ceramic coating for improved durability.
- Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second.
- Pump can run alone to keep production running, if lower maintenance is required.
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Inlet Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 2.54
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 4-Ball, Open Wet Cup
- Includes: Basic Control, No Mounting
- Maximum Continuous Cycle Rate (CPM): 12
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Voltage (V ac): 480
- Maximum Working Pressure (bar): 26
- Maximum Working Pressure (kPa): 2600
- Maximum Working Pressure (MPa): 2.6
- Maximum Working Pressure (psi): 377
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Voltage (V ac): 380
- Overall Depth (cm): 50.5
- Overall Depth (in): 19.88
- Overall Depth (mm): 505
- Overall Height (cm): 115.6
- Overall Height (in): 45.51
- Overall Height (mm): 1156
- Overall Width (cm): 43.2
- Overall Width (in): 17
- Overall Width (mm): 432
E-Flo Pump, 1Hp, 750, Bsc, NPT, Opn, Stnd
GG EC1A51
E-Flo Pump, 1Hp, 750, Bsc, Npt, Opn, StndE-Flo Pump, 1Hp, 750, Bsc, NPT, Opn, Wall
GG EC1A52
E-Flo Pump, 1Hp, 750, Bsc, Npt, Opn, WallE-Flo Pump, 1Hp, 750, Bsc, Tri, Opn, Stnd
GG EC1A61
E-Flo Pump, 1Hp, 750, Bsc, Tri, Opn, StndE-Flo Pump, 1Hp, 750, Bsc, Tri, Opn, Wall
GG EC1A62
E-Flo Pump, 1Hp, 750, Bsc, Tri, Opn, WallE-Flo Pump, 1Hp, 480, Bsc, 750, Srg, Stnd
GG EC1A71
E-Flo Pump, 1Hp, 480, Bsc, 750, Srg, StndE-Flo Pump, 1Hp, 480, Bsc, 750, Srg, Wall
GG EC1A72
E-Flo Pump, 1Hp, 480, Bsc, 750, Srg, WallE-Flo Pump, 1Hp, 750, Adv, NPT, Opn
GG EC1B50
E-FLO PUMP, 1HP, 750, ADV, NPT, OPN
Graco EC1B50 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Advanced, ATEX/FM/IECEx, Open Wet Cup Lower, Ultralife Rod/Cylinder, NPT
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Advanced model lets you easily connect and manage multiple pumps with a single control module.
- Integrated runaway protection prevents pump from premature wear and costly material loss.
- Open wet cup lower includes Ultralife ceramic coating for improved durability.
- Meets requirements of these approval agencies: ATEX, FM, IECEx
- Pump can run alone to keep production running, if lower maintenance is required.
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Inlet Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 2.54
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 4-Ball, Open Wet Cup
- Includes: Advanced Control Input, No Mounting
- Maximum Continuous Cycle Rate (CPM): 12
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Voltage (V ac): 480
- Maximum Working Pressure (bar): 26
- Maximum Working Pressure (kPa): 2600
- Maximum Working Pressure (MPa): 2.6
- Maximum Working Pressure (psi): 377
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Voltage (V ac): 380
- Overall Depth (cm): 50.5
- Overall Depth (in): 19.88
- Overall Depth (mm): 505
- Overall Height (cm): 115.6
- Overall Height (in): 45.51
- Overall Height (mm): 1156
- Overall Width (cm): 43.2
- Overall Width (in): 17
- Overall Width (mm): 432