GRACO INC. S10595
Kit, Repair, Std Seals
GG 15E012
KIT, REPAIR, STD SEALS
KIT INCLUDES: NEEDLE, 2K2 SST HARDENED [QTY. 1], RING, RETAINING, EXTERNAL [QTY. 4 ], BEARING, LUBE 2K2 [QTY. 1], GASKET, SEAT [QTY. 1], SEAT, VALVE [QTY. 1], INSERT, SUFF-BACK, 2K2 [QTY. 1], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 1], SEAL, U-CUP POLYMT 1/4, 1/2, 1/4 [QTY. 1], O-RING, PACKING, #2190 VITON [QTY. 2], PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 4 ], FITTING, LUBTN, ST [QTY. 2], PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 4 ]
Restrictor, Manifold, Remotemix, .024
GG 15E373
Restrictor, Manifold, Remotemix, .024
Adapter, Elbow, Jic04X1/4Npt, Mm
GG 94/1020/98
Adapter, Elbow, Jic04X1/4Npt, Mm
Adapter, Jic06X3/8Npt, Mm, Ss, 6K, 316
GG 94/1007/98
Adapter, Jic06X3/8Npt, Mm, Ss, 6K, 316
Kit, Rebuild 2K2
GG 949634
KIT, REBUILD 2K2
KIT INCLUDES: BEARING, SLEEVE 1/4, 3/8, 1/4NYL [QTY. 2], PACKING, O-RING [QTY. 2], PIN, DOWEL 1/8 X 1.25 18-8 SST [QTY. 1], NUT, LOCK [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 2], PACKING, O-RING [QTY. 2], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 2], BEARING, LUBE 2K2 [QTY. 2], SEAL, U-CUP POLYMT 1/4, 1/2, 1/4 [QTY. 2], NEEDLE, 2K2 SST HARDENED [QTY. 2], GASKET, AIR MANIFOLD [QTY. 1], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1], PACKING, O-RING [QTY. 2], INSERT, SUFF-BACK, 2K2 [QTY. 2], RESTRICTOR, 2K2 3/64 I.D. [QTY. 3], RESTRICTOR, 2K2 1/8 I.D. [QTY. 3], PIN, DOWEL 3/32 X 3/8 18-8 SST [QTY. 4 ], PACKING, O-RING [QTY. 3], PACKING, O-RING [QTY. 2], GASKET, SEAT [QTY. 2], SEAT, VALVE [QTY. 2]
G1 Standard Pump, G-24Nc-2L0A00-Ld000000
GG 94G039
G1 STANDARD PUMP, G-24NC-2L0A00-LD000000
Graco 94G039 G1 Standard Grease Lubrication Pump, 24 VDC, 2 Liter, DIN, Wiper, Low Level
Simple solution. Sophisticated results. Choose the user friendly Graco G1 Pump when you need a reliable, simple alternative to manual lubrication. Work smarter and get better productivity from your equipment with G1 Series lubrication pumps.
Application: Automatic Lubrication for Series Progressive Metering Systems- G1 Standard has no internal controller for a low cost solution.
- 2 liter reservoir
- Connect to 24 VDC
- Hard Working Pump - G1 comes with one pump element installed that reliably delivers lubricant when you need it.
- Achieve Uninterrupted Material Flow - With its advanced flow dynamics the contoured base flows lubricants directly to the pump inlet, significantly reducing stagnant areas where grease can separate.
- Experience Our Long Life Design - Engineered offset drive design minimizes load and stress on the motor and pump element.
- Model: G1
- Series: Standard
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Control Options: Standard
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- Includes: Wiper Arm, External Low Level
- IP Rating: IP69K
- Maximum Flow Rate (ci/min): 0.25
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V dc): 32
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V dc): 18
- Number of Pump Elements: 1
- Overall Depth (cm): 22.9
- Overall Depth (in): 9
- Overall Depth (mm): 229
- Overall Height (cm): 33.7
- Overall Height (in): 13.25
- Overall Height (mm): 337
- Overall Width (cm): 20.3
- Overall Width (in): 8
- Overall Width (mm): 203
- Power Connection Type: DIN
- Power Type: Electric
Posipak, 3/8 Id x 5/8 OD, Std, P/Vit
GG 95/0849/11
Posipak, 3/8 Id x 5/8 OD, Std, P/Vit
SEAL, POSPK, 1/16ID X 5/16OD, STD, P
GG 95/0893/11
SEAL, POSPK, 1/16ID X 5/16OD, STD, P
Repair Kit
GG 95/1661/50
REPAIR KIT,TWINMIXER3,STD ACT,
KIT INCLUDES: SEAL, POSPK, 1/4IDX1/2OD, STD, P/V [QTY. 2], SEAL, POSIPAK, .250IDX.437OD, ZAP [QTY. 4 ], O-RING, QUAD, BUNA, 218, 70A [QTY. 1], O-RING, TES, 015, 70A [QTY. 6 ], O-RING, BUNA, 126, 70A [QTY. 1], O-RING, BUNA, 007, 70A [QTY. 1], O-RING, QUAD, BUNA, 010, 70A [QTY. 2], GASKET, 10-32 FITTING [QTY. 2], LUBRICANT, GREASE, KRYTOX [QTY. 1]
SEAL ASSY, SPOOL, PD, 1.5B, 1/8DIA, LOW, P/VIT
GG 95/2865-11/25
SEAL ASSY, SPOOL, PD, 1.5B, 1/8DIA, LOW, P/VIT
Seal Assy, Cylinder, Drive, PD3
GG 95/2980-01/25
Seal Assy, Cylinder, Drive, PD3
10:1 President Pump, Sst
GG 954088
PRESIDENT PUMP, 10:1
President 10:1 SST Air Spray PumpThe President 10:1 is ideal for locations when pumping directly from the drum is required. The proven configuration is ideal for smooth to heavily aggregated materials containing silica sand, perlite, vermiculite or polystyrene.Ideal for truck, trailer, or inplant locations, it features a high-output piston pump and EvenFlow Valve for consistent spray delivery.EvenFlow Valve- Easy Set-up & Operation
- Smooth, even material flow with air regulators and pressure gauges
- Time-Saving Production Ratios
- Pump is preloaded with material from lower submerged foot valve position
- Texture delivery rates to 3.0 gpm (11 lpm) at 1000 psi (69 bar)
- Available in both carbon steel and stainless steel
- Maintenance-Free Design
- Proven air motor delivers years of reliable, dependable operation
- Easy Drum Mounting
- Save space in your truck or on the job by mounting directly to material containers
- Use in open or closed head drums
Bumper, Rubber, 3/8-16X0.63, 1.25Di
GG 96/0507/11
Bumper, Rubber, 3/8-16X0.63, 1.25Di
D/S Regulator, 3/4In, Cs, 250-4500 psi
GG 961635
REGULATOR, MASTIC, 5000 PSI
Air Operated Mastic Fluid Pressure RegulatorThe mastic regulator is ideal for low to high viscosity sealants or adhesivesThese regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.
G3 Pro Pump, A-Acpr-2L0L00-0D000000
GG 96G079
G3 PRO PUMP, A-ACPR-2L0L00-0D000000
G3® Pro Oil Lubrication Pump, 90-240 VAC, 2 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Pro Pump, A-Acpr-4L0L00-0D000000
GG 96G080
G3 PRO PUMP, A-ACPR-4L0L00-0D000000
G3® Pro Oil Lubrication Pump, 90-240 VAC, 4 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
Kit, Rod Assembly, PD44, 8.00, SS/UHM
GG 964244
Kit, Rod Assembly, PD44, 8.00, SS/UHM
Valve, 1K-Ul, Mach. Mount
GG 965786
ULTRA-LITE 1K VALVE, UL, MACHINE MOUNT
Graco 965786 1k Ultra-Lite Aluminum Machine Mount Valve
Precision Dispense Valve for Quality Bead Dispensing
- Lightweight and compact
- Designed for long service
- Aluminum wetted parts
- Model: Ultra-Lite
- Series: 1K
- Air Inlet Size (in): 1/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Gun Activation: Automatic
- Maximum Viscosity (cP): 1000000
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (kg/cm 2): 281.2
- Maximum Working Pressure (kPa): 27600
- Maximum Working Pressure (psi): 4000
Fireball 425 Pump, 10:1
GG 965129
FIREBALL 425 PUMP, 10:1
Fire-Ball® 425 Series 10:1 400 lb (180 kg). Air-Powered Grease PumpThe Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.
The Fire-Ball 425 is the pump of choice for your most demanding high volume applications.Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
G3 Pro Grease Lubrication Pump, 90-240 VAC, 12 Liter, Low Level With Controller, DIN
GG 96G077
G3 PRO PUMP, G-ACPR-120L00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 12 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
Pump Monark Sanitary 5:1
GG 965520
SANIFORCE PISTON PUMP, TARY 5:1
5:1 Ratio Stubby Double Ball Sanitary PumpDesigned for high production applications, Monark pumps provides uniform and easily controlled delivery with its reliable Monark air motor.
Drum and stubby length models available for mounting and application flexibilityPositive displacement, 2-ball piston design provides uniform and easily controlled deliveryStainless steel or carbon steel models available to handle various fluidsFluid return stanchion for circulation back to the pumpUltra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids
G3 Standard Pump, G-24Nc-4L0A00-L0C00000
GG 96G048
G3 STANDARD PUMP, G-24NC-4L0A00-L0C00000
G3® Standard Grease Lubrication Pump, 24 VDC, 4 Liter, External Low Level, CPCExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solutionCapable of sending a low level signal to your external controller or PLC
G3 Standard Pump, G-Acnc-2L0A00-Ld000000
GG 96G007
G3 STANDARD PUMP, G-ACNC-2L0A00-LD000000
G3® Standard Grease Lubrication Pump, 90-240 VAC, 2 Liter, External Low Level, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solutionCapable of sending a low level signal to your external controller or PLC
G3 Pro Grease Lubrication Pump, 90-240 VAC, 4 Liter, Follower Plate, Low Level With Controller, DIN
GG 96G082
G3 PRO PUMP, G-ACPR-4LFL00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 4 Liter, Follower Plate, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, Low Level With Controller, DIN
GG 96G076
G3 PRO PUMP, G-ACPR-8L0L00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
1K Ultralite Valve with Pneumatic Trigger
GG 965767
ULTRA-LITE 1K VALVE, MANUAL, PNEUMATIC SWITCH
Graco 965767 1K Ultra - Lite Air Operated, Single Component Dispense Valve with Internal Air Switch
1K Ultra-Lite valves are top-of-the-line, lightweight valves designed for long service.
Application: For dispensing a wide variety of single component sealants and adhesives- Lightweight and compact
- Lubricated packings for longer seal life
- Severe-Duty needle and seat
- Adjustable forward travel to reduce material surge
- Manual and automatic versions available
- Pistol grip version provides pilot on/off signal to control pump
G3 Standard Pump, A-24Nc-4L0A00-L0C00000
GG 96G051
G3 STANDARD PUMP, A-24NC-4L0A00-L0C00000
G3® Standard Oil Lubrication Pump, 24 VDC, 4 Liter, External Low Level, CPCExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solutionCapable of sending a low level signal to your external controller or PLC
G3 Standard Pump, G-Acnc-160A00-Ld000000
GG 96G058
G3 STANDARD PUMP, G-ACNC-160A00-LD000000
G3® Standard Grease Lubrication Pump, 90-240 VAC, 16 Liter, External Low Level, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solutionCapable of sending a low level signal to your external controller or PLC
G3 Pro Pump, G-Acpr-2L0L00-0D000000
GG 96G013
G3 PRO PUMP, G-ACPR-2L0L00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 2 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Pro Pump, G-Acpr-2Lfl00-0D000000
GG 96G014
G3 PRO PUMP, G-ACPR-2LFL00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 2 Liter, Follower Plate, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Standard Pump, G-Acnc-2Lfa00-Ld000000
GG 96G008
G3 STANDARD PUMP, G-ACNC-2LFA00-LD000000
G3® Standard Grease Lubrication Pump, 90-240 VAC, 2 Liter, Follower Plate, External Low Level, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solutionCapable of sending a low level signal to your external controller or PLC
G3 Max Full Featured Grease Lubrication Pump, 90-240 VAC, 8 Liter Reservoir
GG 96G554
PUMP, G3-G-ACM2-8L0L00-RMCD0A0VP
G3® Max Full-Featured Grease Lubrication Pump, 90-240 VAC, 8 liter reservoir with low level paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switchExtend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application.LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance.Low level indicator provides low alert and shut-down alarmManual run initiates lubrication on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Max Full Featured Grease Lubrication Pump, 24 VDC, 16 Liter Reservoir
GG 96G560
G3 MAX PUMP, G-24M2-160L00-NMCO000VP
G3® Max Full-Featured Grease Lubrication Pump, 24 VDC, 16 liter reservoir with low level paddle, CPC-7 I/O connector for power, remote button, and alarms for telematics, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switchExtend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application.LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance.Low level indicator provides low alert and shut-down alarmManual run initiates lubrication on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Max Full Featured Grease Lubrication Pump, 24 VDC, 8 Liter Reservoir
GG 96G552
G3 MAX PUMP, G-24M2-8L0L00-NMCO000VP
G3® Max Full-Featured Grease Lubrication Pump, 24 VDC, 8 liter reservoir with low level paddle, CPC-7 I/O connector for power, remote button, and alarms for telematics, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switchExtend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application.LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance.Low level indicator provides low alert and shut-down alarmManual run initiates lubrication on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Max Full Featured Grease Lubrication Pump, 90-240 VAC, 16 Liter Reservoir
GG 96G562
PUMP, G3-G-ACM2-160L00-RMCD0A0VP
G3® Max Full-Featured Grease Lubrication Pump, 90-240 VAC, 16 liter reservoir with low level paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switchExtend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application.LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance.Low level indicator provides low alert and shut-down alarmManual run initiates lubrication on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
G3 Pro Pump, G-24Pr-8L0000-00C00000
GG 96G138
G3 PRO PUMP, G-24PR-8L0000-00C00000
G3® Pro Grease Lubrication Pump, 24 VDC, 8 Liter, CPCExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timerLow level indicator provides low warning and shut-down alarmManual run initiates lube cycle on-demand (remote option also available)Password protection safeguards settingsPre-lube function can initiate lube cycle on start-up
SPRING, COMP, .120 OD X .3125 L, 7.41L
GG 97/0203/98
SPRING, COMP, .120 OD X .3125 L, 7.41L
Screw, Shdc, Ss, .500-13X1.750
GG 9955-56C
Screw, Shdc, Ss, .500-13X1.750
1052-10A-2Rs1-125-V, Dispense Valve
GG A2A03073
1052-10A-2RS1-125-V, DISPENSE VALVE
1052 Dispensit Valve with 1 inch stroke, 0.125 diameter rod, nitrided tool steel wetted componentsThe 1052 is a pneumatically-controlled valve with micrometer adjustable dispense volumes for accurate, repeatable, shot-to-shot dispensing.
1052 positive displacement metering rod valve for low to high viscosity materials.
For low to high viscosity materials with various wetted component configurations for abrasive filled, or corrosive materials.
Pneumatic and electronic controls that can be integrated for automated applications.
Spool, A2011052, SPL, T TYP, SS/PT
GG A2010021
Spool, A2011052, SPL, T TYP, SS/PT
Dispensit Valve, 1206-S1-062-V, Ll, Ss, Fing
GG A2A08051
DISPENSIT VALVE, 1206-S1-062-V, LL, SS, FING
1206 Dispensit Valve with 0.062 diameter rod and nitrided tool steel wetted componentsPatented meter and dispense system for precise one-component micro-dispensing.
For low to high viscosity materials with various wetted component configurations for abrasive filled, or corrosive materials.
Pneumatically-controlled valve with micrometer adjustable dispense volumes for accurate, repeatable shot dispensing.
Accurate and resetable shot size selection.
Easily integrates to automation equipment.
Pneumatic and electronic controls that can be integrated for automated applications.
Adapter, Swv, 1/8Npsx1/16Npt, Fxm, Ms
GG A9000011
Adapter, Swv, 1/8Npsx1/16Npt, Fxm, Ms
Tip, A/A, .011
GG AAF610
TIP, G15, G40
Graco AAF610 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
Tip, A/A, .013
GG AAF412
TIP, G15, G40
Graco AAF412 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
710 Remote, No Needle, No Solenoid
GG A9A01019
710 REMOTE, NO NEEDLE, NO SOLENOID
710 Dispensit ValveThe Model 710 Dispense Valve is an On/Off valve designed for a continuous flow of viscous material through a dispense needle in automatic, semi-automatic or manual applications.
Designed to accurately dispense beads of single-component materials such as silicones and epoxies for sealing, bonding and gasketing applications.
Features and Benefits:
- Dispenses a range of material viscosities and flow rates
- Offers continuous bead dispensing or rapid on/off cycling without reload time
- High-feed pressure-rated needle valve design provides higher flow rates even for narrow bead profiles
- Simple on/off control via PLC for integrated solenoid versions or versions for external pneumatic control
Tip
GG AAM409
TIP, AAM409
Graco AAM409 Fine Finish Spray Tip for G15 and G40 Guns, 0.009 inch (0.229 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
Tip, AA, .011
GG AAM311
TIP, AAM311
Graco AAM311 Fine Finish Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 6-8 inches (150-200 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
1052-10A-2Tt1-125-V, Dispense Valve
GG A2A03076
1052-10A-2Tt1-125-V, Dispense Valve
Dispense Tube, 5542-Hu.037, 10Pack
GG A1020157-10
DISPENSE TUBE,5542-HU.037,10PACK
Graco A1020157-10 10 Pack of Dispense Tubes
Payment options
