GRACO INC. S10595

GG AP2111

Reactor 2 E-30 System, 15Kw, Elite, Ap

GG AP2112

Reactor 2 E-Xp2 System, Elite, Ap

GG AP2572

Reactor A-25 System, Fusion Ap

GG AP9082

REACTOR E-8P SYSTEM, FUSION AP

Graco AP9082 Reactor E-8P Proportioner Package with Fusion AP Spray Gun

Designed specifically for new no-heat foam insulation formulations, the Reactor E-8p produces an air-seal solution that's in demand by homeowners who want to make their homes more energy-efficient. Whether you're expanding your existing insulation application opportunities or just starting your business, the Reactor E-8p provides a quick return on investment. As a touch-up system, the Reactor E-8p frees up larger rigs for medium and large jobs, while enabling you to finish the job affordably.

Application: For air sealing attics and rim joists with unheated spray polyurethane foam.

• Best choice for portability and high-quality foam
  • Haul it in your van or pickup truck
  • Easy to move up and down stairs
  • Telescoping handle and wheels makes it easy to maneuver at the job site
  • Plugs into a standard residential outlet (120 VAC, 15 amp)
  • Weighs just 96 pounds (44 kg)
  • Easy to read pressure gauges ensure you're spraying on-ratio and delivering high-quality foam
  • An economical alternative to froth kits
• Electric Motor
  • Proven motor performance, uses standard residential outlet
• Telescoping Handle
  • Easy handling from your vehicle to the home
• Lightweight
  • Easy to maneuver up and down stairs – only 95 lb (43 kg)
• Threaded Bucket Spout Connection
  • Keeps your connection secure and prevents spills
• Pressure Balance Valves
  • Quick and easy balancing of system pressures enables correct start-up
• Simple User Controls
  • Intuitive start/stop with single control knob

• Model: Reactor
• Series: E-8P

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Thread Type: NPSM

• Amperage (A): 15
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Includes: Fusion AP Gun, Unheated Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Mix Ratio: 1:1

• Overall Depth (cm): 38.3
• Overall Depth (in): 15.06
• Overall Depth (mm): 383

• Overall Height (cm): 61.3
• Overall Height (in): 24.12
• Overall Height (mm): 613
• Overall Width (cm): 87.8
• Overall Width (in): 34.58
• Overall Width (mm): 878

• Power Rating (HP): 2.41
• Power Rating (kW): 1.8
• Power Rating (W): 1800
• Power Source: Electric

• Pressure Type: Low Pressure
• Product Type: Plural Component

GG AP9083

REACTOR E-8P SYSTEM, 240V, FUSION AP

Graco AP9083 Reactor E-8P Proportioner Package, Fusion AP Gun, 240 V

The Reactor E-8p Portable Plural-Component Sprayer offers the mobility and efficiency you need to complete small to medium sized joint filling jobs with ease. With easy control and the ability to pump directly from five-gallon material pails, the Reactor E-8p can help you reduce work time and labor costs.

Application: The Reactor E-8p is ideal for small to mid-sized no-heat joint fill applications

• Lightweight and Portable
  • Built in handles for easy carrying
  • Weighs just 95 pounds (43 kg)
  • Easy to maneuver
  • Simple siphon feeding from 5 gal (19 L) buckets
• Efficient and Fast
  • Simple user controls
  • Electric motor offers high performance while reducing operating costs
  • Recommended maximum output of 0.25 gpm (.95 lpm)
• Built for Maximum Usability
  • Simple, single control knob operation
  • Onboard hose wrap makes storing equipment simple and fast
  • Plugs into standard electrical wall outlet
  • Built-in suction lines allow for use with 5-gal (19 L) pails
• Lightweight and Portable
  • Easy to maneuver up and down stairs, wherever the job goes – only 95 lb (43 kg)
• Alarm / Status Indicator
  • Shuts down unit if off-ratio conditions exist – assures good quality foam at the job site
• Desiccant Air Dryer
  • Allows air to be drawn into pail, protects material from contamination.
• Pressure Balance Valves
  • Quick and easy balancing of system pressures enables correct start-up
• Threaded Bucket Spout Connection
  • Keeps your connection secure and prevents spills
• Electric Motor
  • Proven motor performance and reduced operating costs, plugs into a standard residential outlet
• Easy Controls
  • Intuitive start/stop with single knob operation
• Spray Guns
  • Uses standard Graco Fusion or P2 Guns, provides consistent spray patterns
• Non-heated Hose
  • Easy to maneuver – 70% lighter than standard Reactor heated hose
• Carrying Handle/Hose Wrap
  • Easy to transport, convenient hose storage

• Model: Reactor
• Series: E-8P

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: Quick-Disconnect Pin

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Gender: Male
• Air Outlet Thread Type: NPSM

• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50
• Hose Length (m): 15

• Includes: Proportioner, Fusion AP Gun, Insulated Hose Bundle

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Mix Ratio

GG AP9571

Reactor E-10 System, Cmplt, 240V, 2X10A, Htd

GG AP9572

Reactor E-10 System, Cmplt, 240V, 1X16A, Htd

GG APC200

Gusmer Gh-2 System, 10Kw, 1Ph, Ap

GG APC201

Gusmer Gh-2 System, 10Kw, 3Ph, Ap

GG APC202

Gusmer Gh-2 System, 10Kw, 3Ph/N, Ap

GG 299935

Wire, Gun Harness Assy

GG 299936

Manifold, Air -Ar Gun

GG 299937

Screw, 2-56 X 7/16 Phms

GG 299950

Handle, Ar-C/D Gun Asy

GG 299954

Cover, 250 Dust

GG 299955

Cover, 375 Dust

GG 299963

Stop, Adjustment

GG 299964

O-Ring, #112 Epr

GG 299965

Clip, Retaining

GG 299972

Gx-7 Tip, 375 Pattern Control

GG 299989

Nozzle, 375 Throat

GG 2A25023

PYTHON PUMP, PCI-125-25-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/4 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25024

PYTHON PUMP, PCI-125-38-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 3/8 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25025

PYTHON PUMP, PCI-125-50-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/2 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25030

PYTHON PUMP, PCI-175-25-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/4 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25031

PYTHON PUMP, PCI-175-38-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/8 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25032

PYTHON PUMP, PCI-175-50-XBS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/2 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25034

PYTHON PUMP, PCI-175-75-XBL-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/4 in Plunger, FKM-ETP Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25044

PYTHON PUMP, PCI-125-25-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/4 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Two-piece check valves make it easy to access internal components without disconnecting them from the pump

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25045

PYTHON PUMP, PCI-125-38-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 3/8 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Two-piece check valves make it easy to access internal components without disconnecting them from the pump

Standards

• CE and ATEX approved.

GG 2A25046

PYTHON PUMP, PCI-125-50-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/2 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25051

PYTHON PUMP, PCI-175-25-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/4 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25052

PYTHON PUMP, PCI-175-38-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/8 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25053

PYTHON PUMP, PCI-175-50-XCS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/2 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25055

PYTHON PUMP, PCI-175-75-XCL-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/4 in Plunger, HNBR Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25065

PYTHON PUMP, PCI-125-25-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/4 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25066

PYTHON PUMP, PCI-125-38-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 3/8 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25067

PYTHON PUMP, PCI-125-50-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-1/4 in Air Motor, 1/2 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25072

PYTHON PUMP, PCI-175-25-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/4 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25073

PYTHON PUMP, PCI-175-38-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/8 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25074

PYTHON PUMP, PCI-175-50-XDS-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 1/2 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25076

PYTHON PUMP, PCI-175-75-XDL-0

Python® Pneumatic Chemical Injection Pump, 1-3/4 in Air Motor, 3/4 in Plunger, FFKM Seals

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Python’s extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Python’s extreme duty plungers, seals and timing valves are designed for years of operation before replacement.

Fluid head spin-off design helps gain easy and quick access to the pump seal stack

• Easy access to the pump plunger and packings
• Cartridge style seal in the timing valve for quick and easy repair
• Plunger packings can be replaced in 10 minutes or less

Highest technology timing valve on the market helps regulate air or gas to the pump accurately and effeciently

• Low air/gas consumption for increased efficiency
• Pump cycle rate remains constant regardless of system back pressure

Robust and simple design

• Adjustable fluid packing can last up to 25 times longer than non-adjustable seals
• Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
• HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and check valve seals
• Proprietary poppet style check valve eliminates valve from sticking

Standards

• CE and ATEX approved.

GG 2A25205

PYTHON XL PUMP, PCI-250-25-XBS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/4 in Plunger, FKM-ETP Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25206

PYTHON XL PUMP, PCI-250-38-XBS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, FKM-ETP Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25207

PYTHON XL PUMP, PCI-250-50-XBS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/2 in Plunger, FKM-ETP Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25209

PYTHON XL PUMP, PCI-250-75-XBL-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, FKM-ETP Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25210

PYTHON XL PUMP, PCI-250-25-XCS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/4 in Plunger, HNBR Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25211

PYTHON XL PUMP, PCI-250-38-XCS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, HNBR Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25212

PYTHON XL PUMP, PCI-250-50-XCS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/2 in Plunger, HNBR Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25214

PYTHON XL PUMP, PCI-250-75-XCL-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, HNBR Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25215

PYTHON XL PUMP, PCI-250-25-XDS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/4 in Plunger, FFKM Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25216

PYTHON XL PUMP, PCI-250-38-XDS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, FFKM Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25217

PYTHON XL PUMP, PCI-250-50-XDS-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 1/2 in Plunger, FFKM Seals

Python XL series pumps are ideal for wells with low gas pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25219

PYTHON XL PUMP, PCI-250-75-XDL-0

Python® XL Pneumatic Chemical Injection Pump, 2-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, FFKM Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25406

PYTHON XL PUMP, PCI-450-38-XBS-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, FKM-ETP Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25409

PYTHON XL PUMP, PCI-450-75-XBL-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, FKM-ETP Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25411

PYTHON XL PUMP, PCI-450-38-XCS-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, HNBR Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25414

PYTHON XL PUMP, PCI-450-75-XCL-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, HNBR Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25416

PYTHON XL PUMP, PCI-450-38-XDS-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/8 in Plunger, FFKM Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A25419

PYTHON XL PUMP, PCI-450-75-XDL-0

Python® XL Pneumatic Chemical Injection Pump, 4-1/2 in Air Motor, Chromex Coated 3/4 in Plunger, FFKM Seals

Python XL pumps are ideal for wells with low gas or compressed air inlet pressure. Capable of operating up to 7,000 psi, the pumps are easy to operate and include an air motor with the same proven technology that Graco offers in other product lines. Plus the Python XL’s extreme duty plungers (Chromex™ and ceramic coated), seals and air valves are designed for years of operation before replacement.

Ease of serviceability

• Modular air valve design
• Removable pilot valve
• Pump lowers are interchangeable with other Python XL models
• Plunger packings can be replaced in 10 minutes or less

Highest technology air motor on the market

• Only requires a minimum of 15 psi to operate pump
• Low air/gas consumption for increased efficiency
• Muffler provides low operation noise levels
• Proven Graco® Merkur® air motor technology

Robust and simple design

• 316 SST fluid section/wetted parts
• Three stroke adjustment positions
• HNBR, FKM, FKM ETP, FFKM, and TFE/P plunger packings and check valve seals

Environmentally friendly

• 97% recoverable exhaust gas
• Reduced fugitive methane emissions

GG 2A30021

WOLVERINE ADVANCED MODULE, DRIVE, CI-12L-0

Wolverine® Drive Module, 12 VDC, 1/5 HP Motor

Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.

Drive module comes confirgured for both simplex and duplex pumps from the factory Easy access to the pump drive shaft eliminates the need to rotate the pump cam Module design provides quick fluid head swaping allowing for customization to meet application specific needs Graco's proprietary drivetrain design maximizes robustness and durability All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust. Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Drive Module for Wolverine Pump only

GG 2A30041

WOLVERINE ADVANCED MODULE, DRIVE, CI-1AL-0

Wolverine® Drive Module, 115 VAC, 1/5 HP Motor

Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.

Drive module comes confirgured for both simplex and duplex pumps from the factory Easy access to the pump drive shaft eliminates the need to rotate the pump cam Module design provides quick fluid head swaping allowing for customization to meet application specific needs Graco's proprietary drivetrain design maximizes robustness and durability All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust. Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Drive Module for Wolverine Pump only

GG 2A30073

WOLVERINE ADVANCED MODULE, DRIVE, CI-2AX-X

Wolverine® Hazardous Location Drive Module, 230 VAC, 1/4 HP ATEX approved motor

Wolverine hazardous location chemical injection pumps are designed for injecting chemicals at well sites and pipelines. Explosion proof motors are an integral part of the Hazardous location pumps designed to operate in applications requiring Class 1, Division 1 rated products.

Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers. Motor ATEX approved for Zone 1 hazardous locations Rated for 60°C applications Drive module comes confirgured for both simplex and duplex pumps from the factory Easy access to the pump drive shaft eliminates the need to rotate the pump cam Module design provides quick fluid head swaping allowing for customization to meet application specific needs Graco's proprietary drivetrain design maximizes robustness and durability. All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust. Includes Drive Module for Wolverine Pump only

GG 2A30101

WOLVERINE ADVANCED MODULE, DRIVE, CI-12H-0

Graco 2A30101 Wolverine® Drive Module, 12 VDC, Hazardous Location C1D1 Motor

Wolverine hazardous location chemical injection pumps are designed for injecting chemicals at well sites and pipelines. Explosion proof motors are an integral part of the Hazardous location pumps designed to operate in applications requiring Class 1, Division 1 rated products.

Application: Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.

• Duplex-ready design supports all Graco fluid ends, including previously released models via adapter
• Precision stroke adjustment between 1/4 in to 1 in
• Module design provides quick fluid head swaping allowing for customization to meet application specific needs
• All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust.
• Brushless motors significally reduce aperage draws
• Flow rates up to 320 gpd (1,211 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).
• Long-lasting seals can easily be replaced in less than ten minutes, on location.
• Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.
• Includes Drive Module for Wolverine Pump only

• Model: Wolverine

• Air Inlet Size (in): 1/8

• Approvals: C1D1

• Input Voltage (V ac): 12
• Input Voltage (V dc): 12

• Plunger Size (in): 3/4

• Power Rating (HP): 0.2

GG 2A30121

WOLVERINE ADVANCED MODULE, DRIVE, CI-24H-0

Wolverine® Drive Module, 24 VDC, Hazardous Location C1D1 Motor

Wolverine hazardous location chemical injection pumps are designed for injecting chemicals at well sites and pipelines. Explosion proof motors are an integral part of the Hazardous location pumps designed to operate in applications requiring Class 1, Division 1 rated products.

Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers. Duplex-ready design supports all Graco fluid ends, including previously released models via adapter Precision stroke adjustment between 1/4 in to 1 in Module design provides quick fluid head swaping allowing for customization to meet application specific needs Graco's proprietary drivetrain design maximizes robustness and durability All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust. Brushless motors significally reduce aperage draws Flow rates up to 320 gpd (1,211 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa). Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. Includes Drive Module for Wolverine Pump only

GG 2A30141

WOLVERINE ADVANCED MODULE, DRIVE, CI-3AH-0

Wolverine® Hazardous Location Drive Module, 115/230 VAC Single Phase, 1/5 HP C1D1 Approved Motor

Wolverine® Hazardous Location chemical injection pumps are designed to operate at locations requiring the use of Class 1, Division 1 rated products. These pumps maintain the modular design key to ensuring chemical compatibility is met for injection applications while safeguarding operators at well sites, pipelines and other potentially hazardous locations.

Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers. Drive module comes confirgured as duplex-ready from the factory Easy access to the pump drive shaft eliminates the need to rotate the pump cam Fluid modules can be quickly disconnected by hand, improving time-to-service and component swaps. Graco's proprietary drivetrain design maximizes robustness and durability All Wolverine pumps have 316 SST wetted parts, offering superior resistance against harsh chemicals, water and dust. The motors are rated for use in Division 1 Hazardous (Classified) Locations. Flow rates up to 320 gpd (1,211 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa). Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Drive Module for Wolverine Pump only

GG 2A30201

WOLVERINE VARIABLE SPEED MODULE, DRIVE, CI-12B-0

Wolverine® Drive Module, 12 VDC, Variable Speed C1D2 Motor

The variable speed Wolverine® chemical injection pump provides continuous injection for an even dispersion of chemicals. Flow rates are adjusted between 0-100% by a control dial on the motor eliminating the need for a localized controller. All Wolverine chemical pumps ship duplex-ready to meet field application requirements – whether a simplex or duplex injection pump is required.

High efficiency DC powered brushless motors are suitable for continuous duty chemical dosing applications Class 1, Division 2 approved for Hazardous Location Classified power inverters available for AC motors Variable speed control eliminates the need for a pump controller Precision stroke adjustment between 1/4 in to 1 in Brushless motors significally reduce aperage draws Duplex-ready design supports all Graco fluid ends, including previously released models via adapter Includes Drive Module for Wolverine Pump only

GG 2A30211

WOLVERINE VARIABLE SPEED MODULE, DRIVE, CI-24B-0

Wolverine® Drive Module, 24 VDC, Variable Speed C1D2 Motor

The variable speed Wolverine® chemical injection pump provides continuous injection for an even dispersion of chemicals. Flow rates are adjusted between 0-100% by a control dial on the motor eliminating the need for a localized controller. All Wolverine chemical pumps ship duplex-ready to meet field application requirements – whether a simplex or duplex injection pump is required.

High efficiency DC powered brushless motors are suitable for continuous duty chemical dosing applications Class 1, Division 2 approved for Hazardous Location Classified power inverters available for AC motors Variable speed control eliminates the need for a pump controller Precision stroke adjustment between 1/4 in to 1 in Brushless motors significally reduce aperage draws Duplex-ready design supports all Graco fluid ends, including previously released models via adapter Includes Drive Module for Wolverine Pump only

GG 2A30401

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XBS-0

Wolverine® Fluid Module, 1/4 in Plunger, FKM ETP Seals, Chromex Coated Rod

Featuring a 316 stainless steel construction for maximum chemical compatibility, Wolverine fluid modules are lab-tested and field-proven to provide accuracy, reliability and longevity with seal and packing life that far exceeds the industry standard.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30401ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XBS-ND

Wolverine® ND Fluid Module, 1/4 inch Plunger, FKM ETP Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30402

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XCS-0

Wolverine® Advanced Fluid Module, 1/4 in Plunger, HNBR Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Wolverine fluid modules are compatible with any Graco pump drive, including previous generation Wolverine modules through the use of a adapter kit Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30402ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XCS-ND

Wolverine® ND Fluid Module, 1/4 inch Plunger, HNBR Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30403

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XDS-0

Wolverine® Advanced Fluid Module, 1/4 in Plunger, FFKM Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30403ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-25-XDS-ND

Wolverine® ND Fluid Module, 1/4 inch Plunger, FFKM Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30501

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XBS-0

Wolverine® Advanced Fluid Module, 3/8 in Plunger, FKM ETP Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30501ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XBS-ND

Wolverine® ND Fluid Module, 3/8 inch Plunger, FKM ETP Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30501S

Wolverine Advanced Module, Fluid, Wolverine, Ci-38-Sbs-S

GG 2A30502

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XCS-0

Wolverine® Advanced Fluid Module, 3/8 in Plunger, HNBR Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30502ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XCS-ND

Wolverine® ND Fluid Module, 3/8 inch Plunger, HNBR Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30503

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XDS-0

Wolverine® Advanced Fluid Module, 3/8 in Plunger, FFKM Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30503ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-XDS-ND

Wolverine® ND Fluid Module, 3/8 inch Plunger, FFKM Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30513T12

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-38-ZDS-T

Wolverine® Severe Duty Fluid Module, 5/8 inch Plunger, FFKM Seals, solid ceramic plunger The Wolverine Severe Duty Fluid Modules use a proprietary ceramic coating that is resistance to a wide variety of harsh chemicals including strong oxidizers, biocides and strong acids. The fluid modules come with a solid ceramic plunger to cover an extensive range of chemicals not suitable for stainless steel The fluid modules are configured with FFKM seals for durability and extended pump life Spin-off design gives quick access to the pump plunger and packings Poppet style check valves for improved dosing accuracies. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. Includes Fluid Module for Wolverine Pump only

GG 2A30601

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XBS-0

Wolverine® Advanced Fluid Module, 1/2 in Plunger, FKM ETP Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30601ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XBS-ND

Wolverine® ND Fluid Module, 1/2 inch Plunger, FKM ETP Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30602

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XCS-0

Wolverine® Advanced Fluid Module, 1/2 in Plunger, HNBR Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30602ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XCS-ND

Wolverine® ND Fluid Module, 1/2 inch Plunger, HNBR Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30603

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XDS-0

Wolverine® Advanced Fluid Module, 1/2 in Plunger, FFKM Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30603ND

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-50-XDS-ND

Wolverine® ND Fluid Module, 1/2 inch Plunger, FFKM Seals, Chromex Coated Rod Wellsite chemical spillage can pose significant environmental, safety and regulatory risks. Graco Wolverine ND fluid modules are designed to eliminate chemical leaks via a flexible return hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. Can be assembled on any Wolverine series pump or retrofit onto with 3rd party pumps. Flexible return hose assembly helps return chemicals to the module's suction side if they circumvent seals. Designed for quick installation and easy access to the v-packings. Second set of V-packing seals add protection and keeps chemicals out of the fluid chamber. Poppet style check valves for improved dosing accuracies. 316 stainless steel construction offers superior corrosion resistance and chemical compatibility. Spin-off design gives quick access to the pump plunger and packings Includes Fluid Module for Wolverine Pump only

GG 2A30613T12

Wolverine Advanced Module, Fluid, Wolverine, Ci-50-Zds-T

GG 2A30701

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-63-XBL-0

Wolverine® Advanced Fluid Module, 5/8 in Plunger, FKM ETP Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30702

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-63-XCL-0

Wolverine® Advanced Fluid Module, 5/8 in Plunger, HNBR Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30703

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-63-XDL-0

Wolverine® Advanced Fluid Module, 5/8 in Plunger, FFKM Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30713T12

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-63-ZDL-T

Wolverine® Severe Duty Fluid Module, 3/8 inch Plunger, FFKM Seals, solid ceramic plunger The Wolverine Severe Duty Fluid Modules use a proprietary ceramic coating that is resistance to a wide variety of harsh chemicals including strong oxidizers, biocides and strong acids. The fluid modules come with a solid ceramic plunger to cover an extensive range of chemicals not suitable for stainless steel The fluid modules are configured with FFKM seals for durability and extended pump life Spin-off design gives quick access to the pump plunger and packings Poppet style check valves for improved dosing accuracies. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. Includes Fluid Module for Wolverine Pump only

GG 2A30801

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-75-XBL-0

Wolverine® Advanced Fluid Module, 3/4 in Plunger, FKM ETP Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30802

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-75-XCL-0

Wolverine® Advanced Fluid Module, 3/4 in Plunger, HNBR Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2A30803

WOLVERINE ADVANCED MODULE, FLUID, WOLVERINE, CI-75-XDL-0

Wolverine® Advanced Fluid Module, 3/4 in Plunger, FFKM Seals, Chromex Coated Rod

Wolverine fluid modules are made of a 316 Stainless Steel construction for maximum chemical compatibility.

Available in a range of plunger sizes and different seal options to help fit all chemical compatibility requirements for treatment. Proprietary poppet style, 2-piece check valve eliminates valve from sticking and signigicantly improves dosing accuracy V-style packing with dual lip design helps maximize fluid sealing Interchangeable with Wolverine series pumps Spin-off design gives quick access to the pump plunger and packings Friction-reducing rod construction extends seal life and improves pump performace Long-lasting seals can easily be replaced in less than ten minutes, on location. Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates. HNBR, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system. Includes Fluid Module for Wolverine Pump only

GG 2B32437

Kit, Replacement, Packing, Cip, 25, Fkmetp

GG 2B32438

Kit, Replacement, Packing, Cip, 38, Fkmetp

GG 25U398

Sleeve, Clamping

GG 25U399

Spacer