GRACO INC. S10595

GG 558722

O-Ring, -910

GG 558724

O-Ring, (-011) Viton-75 Duro

GG 558725

O-Ring, (-012) Viton-75 Duro

GG 558726

O-Ring, (-013) Viton-75 Duro

GG 558731

O-Ring, Viton 90 Duro -015, Black

GG 558732

O-Ring, Viton 90 Duro -902

GG 558794

Bushing, 3/4 X 1/4 Nptf Hex Red

GG 558795

Fitting, Tee, Male Branch, 1/8

GG 558799

PLUG, STL 1/8 BSPP HEX SOC HD

Trabon® MSP Divider Valve - Outlet Port Plug, BSPP For use with Trabon® MSP Divider Valves.

Outlet Port Plug - 1 outlet port plug is required for each “S” valve section

BSPP with face seal

Lubriquip part number 412-700-404

GG 558812

O-Ring, Arp-10 Viton A

GG 558899

GAUGE, 1000PSI, DRY, CB, 1/8

Pressure Gauge, 0-1000 psi For use with Maxi-Flo Electric Pumps.

Gauge, 0-1,000 psi

Lubriquip part number 493-020-241

GG 558910

FITTING, ANCHOR STR 1/2

Anchor Mount - 180° Straight Anchor Fitting, 1/2 in. NPSF

180° Straight Anchor Fitting

1/2" NPSF

Lubriquip part number 509-195-000 Trabon part number 9195

GG 558933

Switch, Prox, Ms/Mh Exp Proof

GG 558950

METER-FLO PUMP, 76/116 CU IN/MIN CW NPT

Meter-Flo® Electric Pump, 117 cu in/min (1917 cc/min) @ 1,725 rpm, NPT Ports, CW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-051

GG 558951

METER-FLO PUMP, 111/167 CU IN/MIN CW NPT

Meter-Flo® Electric Pump, 168 cu in/min (2753 cc/min) @ 1,725 rpm, NPT Ports, CW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-071

GG 558952

METER-FLO PUMP, 9/14 CU IN/MIN CCW SAE

Lubriquip part number 540-800-370

GG 558953

Meter-Flo Pump, 9/14 Cu In/Min Ccw Sae

GG 558954

Meter-Flo Pump, 26/40 Cu In/Min Ccw Sae

GG 558955

METER-FLO PUMP, 156/235 CU IN/MIN CW NPT

Meter-Flo® Electric Pump, 245 cu in/min (4015 cc/min) @ 1,725 rpm, NPT Ports, CW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-940

GG 558956

BRACKET, MNG PUMP

C-Face Pump Mounting Bracket with Drive Coupling for Trabon® Meter-Flo® Pump Packages For use with Meter-Flo® Pump Packages.

Pump Mounting Bracket, C Face, w/ Drive Coupling

Lubriquip part number 540-835-000

GG 558965

CABLE, CONN 5PIN B/H

Proximity Switch Connector Cable - 6 ft, 5-Pin, 90° Connector For use with Series-Flo® Divider Valves and Proximity Switches.

5-pin connection cable, 90°, 6ft

Lubriquip part number 570-999-390

GG 558968

Cable, Counter 4Pin Mini Led

GG 558998

Valve, Relief Ind 2200 Psi

GG 559001

Nut, Lock, 3/8-24, Monel

GG 559008

O-Ring, (-217) Viton-75 Duro, Black

GG 5590-U.250X8IN

Dispense Tube, Urethane, 1/4Idx3/8Od, 10Pac

GG 559037

Valve, Assy, Oil Level

GG 55-919

Asm Tip, Zip, Pkg, 919

GG 55-941

Asm Tip, Zip, Pkg, 941

GG 560008

Nut, Comp .50 X 3/4-18 Ft St

GG 560046

SIGHTGLASS, FD WHITE BACKGROUND

Lubriquip part number 050101 Kipp/KLS/MEGA part number SV-31-D(WHITE)

GG 560127

Bearing, End

GG 560129

Bearing, End

GG 560130

Bearing, End

GG 560134

Bearing, Shaft

GG 560135

Bearing, Oil Seal

GG 560139

Bearing, Oil Seal Assy Spcl

GG 560148

Bearing, Bushing, 1 Piece

GG 560149

Bearing, Bushing, 2 Pieces

GG 560150

Bearing, Bushing, 2 Pieces

GG 560151

Bearing, Roller, Id 13/64

GG 560152

Bearing, Roller, Id .439

GG 560157

NUT, FD ADJ

Feed Adjusting Nut Lubriquip part number 410-700-440 Manzel part number HP-20-14-1

GG 659034

HUSKY PUMP, 3300A-E A04CA1SPSPSPPT

Graco 659034 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Acetal

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: TPE
• Diaphragm Material: TPE (Hytrel)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: None
• Material: Aluminum

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Operating Temperature (°C): -28.89
• Minimum Operating Temperature (°F): -20

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659036

HUSKY PUMP, 3300A-E A04CA1GEGEGEPT

Graco 659036 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Buna-N

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: Buna
• Diaphragm Material: Buna-N

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: None
• Material: Aluminum

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Operating Temperature (°C): -12.22
• Minimum Operating Temperature (°F): 10

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659038

HUSKY PUMP, 3300A-E A04CA2SSPTPTPT

Graco 659038 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Diaphragm Material: PTFE/EPDM 2-Piece

• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 552
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80

• Maximum Working Pressure (psi): 80

• Overall Height (in): 23.6

• Power Source: Electric

GG 659039

HUSKY PUMP, 3300A-E A04CA2SPSPSPPT

Graco 659039 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Application: Industrial

• Center Section Material: Aluminum

• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80

• Maximum Working Pressure (psi): 80

• Overall Height (in): 23.6

• Power Source: Electric

GG 659041

HUSKY PUMP, 3300A-E A04CA2GEGEGEPT

Graco 659041 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Application: Industrial

• Center Section Material: Aluminum

• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80

• Maximum Working Pressure (psi): 80

• Overall Height (in): 23.6

• Power Source: Electric

GG 659400

HUSKY PUMP, 3300P-E A04AP1PPPTPTPT

Husky 3300e 3" PP Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659401

HUSKY PUMP, 3300P-E A04AP1SPSPSPPT

Husky 3300e 3" PP Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659405

HUSKY PUMP, 3300P-E A94GP1SPSPSPPT

Husky 3300e 3" PP Electric Diaphragm Pump; -- No Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659406

HUSKY PUMP, 3300P-E A94GP1PPPTPTPT

Graco 659406 Husky 3300e 3" PP Electric Diaphragm Pump, -- No Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659411

HUSKY PUMP, 3300P-E A04AP1PPCWSPPT

Graco 659411 Husky 3300e 3" PP Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, CW Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659800

HUSKY PUMP, 3300S-E A04AS1SPSPSPBN

Graco 659800 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659801

HUSKY PUMP, 3300S-E A04AS1SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659802

HUSKY PUMP, 3300S-E A04AS1SPSPSPPT

Graco 659802 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659803

HUSKY PUMP, 3300S-E A04AS1GEGEGEBN

Graco 659803 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659804

HUSKY PUMP, 3300S-E A04AS2SSPTPTPT

Graco 659804 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659805

HUSKY PUMP, 3300S-E A04AS2SPSPSPPT

Graco 659805 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659806

HUSKY PUMP, 3300S-E A04AS2GEGEGEBN

Graco 659806 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659807

HUSKY PUMP, 3300S-E A06AS1SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659808

HUSKY PUMP, 3300S-E A06AS1SPSPSPPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659809

HUSKY PUMP, 3300S-E A06AS1GEGEGEBN

Graco 659809 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659810

HUSKY PUMP, 3300S-E A06AS2SSPTPTPT

Graco 659810 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659811

HUSKY PUMP, 3300S-E A06AS2SPSPSPPT

Graco 659811 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659812

HUSKY PUMP, 3300S-E A06AS2GEGEGEBN

Graco 659812 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659813

HUSKY PUMP, 3300S-E A94GS1SSPTPTPT

Graco 659813 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659814

HUSKY PUMP, 3300S-E A94GS1SPSPSPPT

Graco 659814 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659815

HUSKY PUMP, 3300S-E A94GS1GEGEGEBN

Graco 659815 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659816

HUSKY PUMP, 3300S-E A94GS2SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; -- No Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659817

HUSKY PUMP, 3300S-E A94GS2SPSPSPPT

Graco 659817 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659818

HUSKY PUMP, 3300S-E A94GS2GEGEGEBN

Graco 659818 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659819

HUSKY PUMP, 3300S-E A04CS1SSPTPTPT

Graco 659819 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659820

HUSKY PUMP, 3300S-E A04CS1SPSPSPPT

Graco 659820 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659821

HUSKY PUMP, 3300S-E A04CS1GEGEGEBN

Graco 659821 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659822

HUSKY PUMP, 3300S-E A04CS2SSPTPTPT

Graco 659822 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 552
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 833

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659823

HUSKY PUMP, 3300S-E A04CS2SPSPSPPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659824

HUSKY PUMP, 3300S-E A04CS2GEGEGEBN

Graco 659824 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659825

HUSKY PUMP, 3300S-E A04DS1SSPTPTPT

Graco 659825 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp CID1 Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 552
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 833

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric