GRACO INC. S10595

GG ISR357

PACKAGE, H30, R3, 60HZ, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR365

PACKAGE, HXP2, R3, 60HZ, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR367

PACKAGE, HXP2, R3, 60HZ, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR375

PACKAGE, H50, R3, 230V, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR376

PACKAGE, H50, R3, 400V, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR377

PACKAGE, H50, R3, 230V, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR378

PACKAGE, H50, R3, 400V, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR385

PACKAGE, HXP3, R3, 230V, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR386

PACKAGE, HXP3, R3, 400V, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR387

PACKAGE, HXP3, R3, 230V, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR388

PACKAGE, HXP3, R3, 400V, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR389

PACKAGE, H30, R3, 50HZ, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR390

PACKAGE, H30, R3, 50HZ, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR391

PACKAGE, HXP2, R3, 50HZ, PRO, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG ISR392

PACKAGE, HXP2, R3, 50HZ, ELITE, IS

• Simplified robust design eliminates fly wheel and belt system for reduced maintenance
• Smaller compact footprint
• Reduced noise

• Positive displacement pumps
• Easy service
• Long life
• Smooth changeovers and spray pattern
• Multiple pump sizes for non 1:1 dispensing

• Powerful fan to maintain optimal oil temperature for longer oil life

• Large new touchscreen interface
• Intuitive operation and navigation
• All spray operations from one screen
• Electronic pressure control (Elite models)

• Robust heating design
• Heats materials quickly and efficiently
• Maintains temperature set points at max flow rates

• Control A and B materials to different temperatures for improved pressure balancing and optimized yield

• Easy-to-access oil dip stick and oil drain valve simplifies preventive maintenance

• New easy-to-maintain design
• 2X larger filter area
• Separate temperature and pressure sensors for more accurate temperature readings
• Redesigned with side-mounted fluid valves for easier turning and improved control

• Real-time dashboard and reports via cellular connectivity
• Improved cellular antenna
• New GPS antenna
• GPS location available in Reactor Connect
• Job naming and reporting

• Verifies fluid ratio
• Provides real-time ratio data: displayed on the ADM and Reactor Connect
• Accurate for a wide range of fluid viscosities

GG J0000018

GG J2500016

GG J3000006

GG J6100004

GG J6100011

GG J6100020

GG J6300012

GG J7000008

GG J7000009

GG J7000010

GG J7500011

GG J7500034

GG JC20L9

HIGH-FLO PUMP, 2200/2000, LOW N, OPN, NPT

Graco JC20L9 High-Flo 4-Ball Pump, CS, 2:1, Low Noise Exhaust, Open Wet Cup Lower, NPT Fittings, Ultralife Rod/Cylinder

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

• Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
• Rugged body armor, won’t rust or dent
• De-icing controls eliminate stalling

• Model: High-Flo
• Series: 4-Ball

• Application: Circulation

• Compatible Material: Waterborne, Solventborne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: Open Wet Cup

• Includes: Carbon Steel Pump, Low Noise Exhaust, NPT Fittings, Ultralife Rods, Ultralife Cylinder

• Material: Carbon Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 12

• Maximum Flow Rate (GPM): 31.9
• Maximum Flow Rate (L/min): 120.75

• Maximum Operating Temperature (°C): 66
• Maximum Operating Temperature (°F): 150

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (MPa): 2.1
• Maximum Working Pressure (psi): 300

• Motor Type: Low Noise NXT

• Portable: Non-Portable

• Pump Ratio: 2:1

GG JC20M9

GG JC30L9

HIGH-FLO PUMP, 2200/1500, LOW N, OPN, NPT

GG JC35A9

HIGH-FLO PUMP, XL34/2000, LN, OPN, NPT

GG JC45A9

HIGH-FLO PUMP, XL34/1500, LN, OPN, NPT

GG JK-9500

GG JS20L9

HIGH-FLO PUMP, 2200/2000, LOW N, OPN, NPT

GG JS20M8

GG JS20R8

HIGH-FLO PUMP, 2200/2000, RMT EX, SLD, TRI

GG JS23A8

HIGH-FLO PUMP, 3000, LN, SLD, TRI

GG JS30L0

HIGH-FLO PUMP, 2200/1500, LOW N, OPN, TRI

GG JS30L8

HIGH-FLO PUMP, 2200/1500, LOW N, SLD, TRI

GG JS30L9

HIGH-FLO PUMP, 2200/1500, LOW N, OPN, NPT

GG JS30M8

HIGH-FLO PUMP, 2200/1500, LOW DT, SLD, TRI

GG JS30R8

HIGH-FLO PUMP, 2200/1500, RMT EX, SLD, TRI

GG JS30S8

GG JS33C8

HIGH-FLO PUMP, 4000, REM, SLD, TRI

GG JS33D8

HIGH-FLO PUMP, 4000, REM, DT, SLD, TRI

GG JS35C8

HIGH-FLO PUMP, XL34/2000, REM, SLD, TRI

GG JS35D8

HIGH-FLO PUMP, XL34/2000, REM, DT, SLD, TRI

GG JS40L0

HIGH-FLO PUMP, 2200/1000, LOW N, OPN, TRI

GG JS40L9

HIGH-FLO PUMP, 2200/1000, LOW N, OPN, NPT

GG JS40R8

GG JS45A8

HIGH-FLO PUMP, XL34/1500, LN, SLD, TRI

GG JS45B8

HIGH-FLO PUMP, XL34/1500, LN, DT, SLD, TRI

GG JS45C8

HIGH-FLO PUMP, XL34/1500, REM, SLD, TRI

GG JS53A8

HIGH-FLO PUMP, 2500, LN, SLD, TRI

GG JS90B5

HIGH-FLO PUMP,XL34/750,LN,DT,SLD,NPT,TR

GG K0010004

GG K0010005

GG K0010016

GG K30FH0

KING SPRAYER, 30:1, H-P, BF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K40FW0

KING SPRAYER, 40:1, H-P, BF, WALL, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K40FW1

KING SPRAYER, 40:1, H-P, BF, WALL, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K45FW0

KING SPRAYER, 45:1, H-P, BF, WALL, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K45FW1

KING SPRAYER, 45:1, H-P, BF, WALL, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K45MH2

KING SPRAYER, 45:1, H-P, MAX, HD, COMP, LUB

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K47FH0

GG K47FH1

GG K60FW0

KING SPRAYER, 60:1, H-P, BF, WALL, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K60FW1

KING SPRAYER, 60:1, H-P, BF, WALL, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K70FW0

KING SPRAYER, 70:1, H-P, BF, WALL, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K70FW1

KING SPRAYER, 70:1, H-P, BF, WALL, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K70MH2

KING SPRAYER, 70:1, H-P, MAX, HD, COMP, LUB

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K70NH0

KING SPRAYER, 70:1, H-P, NF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K70NH1

KING SPRAYER, 70:1, H-P, NF, HD, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K71FH0

KING SPRAYER, 71:1, H-P, BF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K71FH1

KING SPRAYER, 71:1, H-P, BF, HD, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K71NH0

KING SPRAYER, 71:1, H-P, NF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K71NH1

KING SPRAYER, 71:1, H-P, NF, HD, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K82FH0

KING SPRAYER, 82:1, H-P, BF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K82FH1

KING SPRAYER, 82:1, H-P, BF, HD, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K90FH0

KING SPRAYER, 90:1, H-P, BF, HD, BARE

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG K90FH1

KING SPRAYER, 90:1, H-P, BF, HD, COMP

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

• This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
• All motor parts are easily accessible and require simple maintenance.

• The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
• The icing potential has been reduced by up to 70%

• With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
• Eliminating the "wink" in your pattern - it is a difference you will feel.

• Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.

• Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.

GG KN3DH0

GG KN6DH0

GG L045S4

LOWER, CHEMICAL, 045, SST, UCUP

GG L058C0

GG L075S1

LOWER, CHEMICAL, 75, SST, UCUP

GG L085C0

GG L085C1

GG L085C2

GG L085C3

GG L085C4

GG L090C0

GG L097C0

GG L100CE

GG L115C0

GG L115C1

GG L115C2

GG L115C3

GG L115C4

GG L115C5