GRACO INC. S10595

GG 557019

Gear, Worm, 10:1

GG 557020

Gear, Worm 20:1 Ratio Drv

GG 557024

Pawl, Rocker Arm

GG 557035

Plate, Sightglass

GG 557062

Shaft, Crank Hp

GG 557063

Shaft, Crank Hp

GG 557085

Reservoir, Mbl, 16 Pt, Paint

GG 557122

Cover, Hp Shaft End

GG 55-713

Asm Tip, Zip, Pkg, 713

GG 557132

ELEMENT, FILTER

Replacement Element for In-Line Filter - 25 Micron For use with In-Line Oil Filters used in Low Pressure Thrif-T Luber Orifice Systems.

Replacement Filter Element for In-Line Oil Filter (564053)

Lubriquip part number 473-000-231 Manzel part number XP-6208-31

GG 557149

Strainer, Filter

GG 557154

STRAINER, 325 MESH

General Accessories - Oil/Grease Strainers - 44 Micron Replacement Filter Element For use with Oil and Grease Strainers.

44 micron Replacement Filter Element for 563103

Lubriquip part number 473-020-466

GG 557153

STRAINER, 100 MESH

General Accessories - Oil/Grease Strainers - 149 Micron Replacement Filter Element For use with Oil and Grease Strainers.

149 micron Replacement Filter Element - 563102

Lubriquip part number 473-020-465

GG 557155

Strainer, Suction

GG 557160

Gear Reducer, 10:1, 56C Flange

GG 557161

GEAR REDUCER 60:1, 56C FLANGE

60:1 Gear Reducer - Floor or Wall Mount For use with Lube Master Pump Packages.

Gear Reducer, 60:1, Floor- or Wall-Mounting

Lubriquip part number 481-010-224

GG 557164

Gear, Reducer, 5:1 Vert C-Face

GG 55-717

Zip Tip

GG 557171

Cap, Filler

GG 557191

Collar, Piston

GG 557270

MOTOR, 1/2-1725-230/460

Motor - 1/2 HP, 230/460 VAC, 3-phase, 60 Hz, 1,725 rpm For use with Lube Master Pumps.

1/2 HP, 230/460 VAC, 3-phase, 60 Hz, 1,725 rpm

Lubriquip part number 492-380-030

GG 557271

Motor, 115/230 Iph 60Hz 1/2Hp 56C Tefc

GG 557273

Motor, 1/2-1140-230/460

GG 557278

Gauge, 1500Psi/100Bar, Dry, Cb, 1/4

GG 557279

GAUGE, 3000, 1/4 NPT BACK MT

Lubriquip part number 493-020-240

GG 557287

MOTOR, GEAR, 24 VDC, 12 RPM

Graco 557287 Modu-Flo Spare Parts - 24 VDC Gear Motor

Application: For use with Modu-Flo Pumps.

• 24 VDC gear motor
• Lubriquip part number 493-040-069

• For Use With: Modu-Flo Pumps

• Rated Speed (RPM): 13

GG 557291

Gear Reducer, 3:1 Mmf

GG 557292

Gear Reducer, 5:1 Mmf

GG 557293

GEAR REDUCER, 12.5:1 MMF

12.5:1 Gear Box for Miniature Meter-Flo® - 1 cu in/min (16 cc/min) For use with Miniature METERFLO Pumps.

Gear Box, 1 in3/min. (12.5:1)

Lubriquip part number 493-060-007

GG 557314

Gasket, .500 X .375 X .020

GG 557317

Gasket, .44 X .250 X .031

GG 557324

Clip, Half 1/4 Tube Stl

GG 557332

GASKET, 5LB, RESERVOIR

5 lb. Reservoir Gasket For use with Lube Pro™ Vertical Oil Pumps.

Reservoir Gasket

Lubriquip part number 501-414-000 Trabon part number 1414

GG 557333

GASKET, 6, 12, 20 LB RESV

6, 12 & 20 lb. Reservoir Gasket For use with Grease Jockey, Lube Master and LubePro Pumps.

Reservoir Gasket

Lubriquip part number 501-423-000 Trabon part number 1423

GG 557341

RESERVOIR, PLSTC L12

Tube Reservoir, 12 lb. Plastic (6 in. x 13 in.) For use with Lube Master Pump Packages.

Tube Reservoir, 12 lb Plastic (6 in. x 13 in.)

Lubriquip part number 501-483-030 Trabon part number 1483-3

GG 557345

Bearing, Ball, Single, .787 Id

GG 557348

RESERVOIR, PLASTIC, 5 #

2 Liter Plastic Reservoir for 29:1 LubePro™ Vertical Grease Pump For use with 29:1 Lube Pro™ Vertical Grease Pumps.

Plastic Reservoir, 4 lb

Lubriquip part number 503-468-030 Trabon part number 3468-3

GG 55-735

Asm Tip, Zip, Pkg, 735

GG 557359

GASKET, .570 X .410 X .032

Trabon® MJ Divider Valve - Upper Seal for Cross Port Kit For use with Trabon® MJ Divider Valves.

Upper Seal for Cross port Kit

Lubriquip part number 503-816-010

GG 557373

CAP, DUST FILL STUD

Fill Stud Dust Cap for Lube Master® Pump Packages For use with Lube Master Pump Packages.

Dust Cap

Lubriquip part number 506-165-000 Trabon part number 6165

GG 557377

Holder, Ato Line Fuse

GG 557393

COUPLING, 1/8FP X 1/8MP X 1-1/4EX

Miscellaneous Adapters and Fittings - Extension - 1/8 inch NPT x 1/8 inch NPTF, 1-1/4 inch Long

Extension - 1/8 inch (3.2 mm) NPT x 1/8 inch (3.2 mm) NPTF, 1-1/4 inch (3.18 cm) Long

Lubriquip part number 509-028-000 Trabon part number 9028

GG 557402

Nut, Press Relief, 1/4 Hole

GG 557423

DISK, BURST, .375 1450/3700 PSI YELLOW

Replacement Rupture Disk, 3/8 in, 3700 psi, Yellow Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 3,700 psi - .375" - yellow

Lubriquip part number 509-278-000 Trabon part number 9278

GG 557424

DISK, BURST, .375 1750/4600 PSI RED

Replacement Rupture Disk, 3/8 in, 4600 psi, Red Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 4,600 psi - .375" - red

Lubriquip part number 509-279-000 Trabon part number 9279

GG 557426

DISK, BURST, .375 2350 PSI ALUM

Replacement Rupture Disk, 3/8 in, 2350 psi, Aluminum Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 2,350 psi - .375" - aluminum

Lubriquip part number 509-281-000 Trabon part number 9281

GG 557429

DISK, BURST, .375 3250 PSI PURPLE

Replacement Rupture Disk, 3/8 in, 8200 psi, Purple Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 8,200 psi - .375" - purple

Lubriquip part number 509-284-000 Trabon part number 9284

GG 557430

DISK, BURST, .375 5000 PSI BROWN

Replacement Rupture Disk, 3/8 in, 5000 psi, Brown Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 5,000 psi - .375" - brown

Lubriquip part number 509-285-200 Trabon part number 9285-B

GG 557431

DISK, .688 900 PSI BLK

Replacement Rupture Disk, 11/16 in, 900 psi, Black Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 900 psi - .688" - black

Lubriquip part number 509-290-000 Trabon part number 9290

GG 557432

DISK, .688 1175 PSI GRN

Replacement Rupture Disk, 11/16 in, 1175 psi, Green Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 1,175 psi - .688" - green

Lubriquip part number 509-291-000 Trabon part number 9291

GG 557435

DISK, BURST, .688 2050 PSI ORANGE

Replacement Rupture Disk, 11/16 in, 2050 psi, Orange Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 2,050 psi - .688" - orange

Lubriquip part number 509-294-000 Trabon part number 9294

GG 557437

DISK, BURST, .688 2650 PSI PINK

Replacement Rupture Disk, 11/16 in, 2650 psi, Pink Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 2,650 psi - .688" - blue

Lubriquip part number 509-296-000 Trabon part number 9296

GG 557489

ROD, TIE, MX 4

Trabon® MX Divider Valve - 4 Section Tie Rod For use with Trabon® MX Divider Valves. 4-Section Tie Rods Lubriquip part number 510-505-040 Trabon part number 10505-4

GG 557491

ROD, TIE, MX 6

Trabon® MX Divider Valve - 6 Section Tie Rod For use with Trabon® MX Divider Valves. 6-Section Tie Rods Lubriquip part number 510-505-060 Trabon part number 10505-6

GG 557492

ROD, TIE, MX 7

Trabon® MX Divider Valve - 7 Section Tie Rod For use with Trabon® MX Divider Valves. 7-Section Tie Rods Lubriquip part number 510-505-070 Trabon part number 10505-7

GG 557493

ROD, TIE, MX 8

Trabon® MX Divider Valve - 8 Section Tie Rod For use with Trabon® MX Divider Valves. 8-Section Tie Rods Lubriquip part number 510-505-080 Trabon part number 10505-8

GG 557495

PLUG, ENCL RD STL 1 3/8-16 MGO

Trabon® MGO Divider Valves - Enclosure Plug

GG 557497

RING, RETAINER VLV SPRAY

Retainer Ring for Spra-Control™ Valve For use with Air-Lube Spra-Control Valves.

Spray Valve Retaining Ring

Lubriquip part number 510-637-000 Trabon part number 10637

GG 557498

CAP, AIR VLV SPRAY

Air Cap for Spra-Control™ Valve For use with Air-Lube Spra-Control Valves.

Air Nozzle

Lubriquip part number 510-638-000 Trabon part number 10638

GG 557499

Cap, Fluid Vlv Spray

GG 557503

GASKET, CU .390 X .078

Trabon® MJ Divider Valve - Lower Seal for Cross Port Kit For use with Trabon® MJ Divider Valves.

Lower Seal for Cross port Kit

Lubriquip part number 510-657-000 Trabon part number 10657

GG 557512

Gasket, .718 X .313 X .078

GG 557516

ROD, TIE MJ 4

Trabon® MJ Divider Valve - 4 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 4-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-040 Trabon part number 10999-4

GG 557517

ROD, TIE MJ 5

Trabon® MJ Divider Valve - 5 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 5-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-050 Trabon part number 10999-5

GG 557519

ROD, TIE MJ 7

Trabon® MJ Divider Valve - 7 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 7-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-070 Trabon part number 10999-7

GG 557520

ROD, TIE MJ 8

Trabon® MJ Divider Valve - 8 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 8-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-080 Trabon part number 10999-8

GG 557527

RESERVOIR, PLASTIC, 20LB

Tube Reservoir, 20 lb. Plastic (6 in. x 20 in.) For use with Lube Master Pump Packages.

Tube Reservoir, 20 lb Plastic (6 in. x 20 in.)

Lubriquip part number 511-175-001 Trabon part number 11175-1

GG 557547

Injecto-Flo Pump, Ii Standard

GG 557552

Cup, Follower, #12/#20

GG 557554

Label, Notice, Resv Plstc Instr

GG 557583

BRACKET, HI-PRESS, MODULAR 12 CAP

Lubriquip part number 521-000-770

GG 557586

Plug, Vent

GG 557604

BRACKET, MTG TIMER, PAINT

Lubriquip part number 521-004-280

GG 557608

Cover, Resv 1.5 Gal

GG 557610

Cover, Resv, 5 Gal Paint

GG 557629

Reservoir, Hsg Maxi-Flo

GG 557634

Pin, Spr

GG 557635

Cover, Linkage

GG 557641

MOTOR, GEAR 120V

Thrif-T Luber Replacement Parts - Replacement Gear motor, 115 VAC For use with Thrif-t Luber Pumps.

Replacement Gear motor, 115 VAC

Lubriquip part number 521-500-650

GG 557655

Plate, Mtg

GG 557701

STRAINER, 40 MICRON

Replacement Filter Element, 44 micron/325 mesh; Lubriquip part number 525-766-015 For use with High Pressure In-Line Oil Filters.

Replacement element for filter assembly 563508

GG 557713

Gauge, 3000Psi/210Bar, Liq, Sm, 1/4

GG 557717

Gasket, Plug Encl, Alum Msp

GG 557720

Stem, Indicator

GG 557738

ROD, TIE, MSP, 9 SECTION

Trabon® MSP Divider Valve - 9 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 9-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-002-070

GG 557739

ROD, TIE, MSP, 10 SECTION

Trabon® MSP Divider Valve - 10 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 10-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-002-080

GG 557740

ROD, TIE, MSP, 11 SECTION

Trabon® MSP Divider Valve - 11 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 11-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-002-090

GG 557745

Switch, Proximity, Msp, Ul/Csa, N.O.

GG 557752

SWITCH, PROX, MX/MXP, 4PIN 24VDC

Field Sensitive Magnetic (FSM) Proximity Switch for MXP and MX divider valves, 4 pin CH connector A proximity switch is a magnetically operated sensing device used to detect cycles of a Series Progressive Divider Valve. Install a proximity switch in place of a piston enclosure plug to allow a PLC or lubrication controller to monitor cycles of the divider valve assembly. O-ring sealed proximity switch for Trabon MXP and MX divider valves. Compatible with 24 VDC and 110/240 VAC 4 pin CH electrical connector mates to 12 ft (3.66 m) cable 558025 (straight) and 558026 (90º) UL and CSA Approved – search their respective website for the certifications or contact Graco Technical Assistance Maximum cycle 125 cpm 2A @ 240 VAC; 4A @ 110 VAC; 3A @ 24 VDC Lubriquip part number 527-007-110

GG 557768

ROD, TIE, MXP, 5 SECTION

Trabon® MXP Divider Valve - 5 Section Tie Rod (3 Required) For use with Trabon® MXP Divider Valves. 5-Section Tie Rod Three required per assembly Lubriquip part number 527-300-290

GG 557769

ROD, TIE, MXP, 6 SECTION

Trabon® MXP Divider Valve - 6 Section Tie Rod (3 Required) For use with Trabon® MXP Divider Valves. 6-Section Tie Rod Three required per assembly Lubriquip part number 527-300-300

GG 557770

ROD, TIE, MXP, 7 SECTION

Trabon® MXP Divider Valve - 7 Section Tie Rod (3 Required) For use with Trabon® MXP Divider Valves. 7-Section Tie Rod Three required per assembly Lubriquip part number 527-300-310

GG 557771

ROD, TIE, MXP, 8 SECTION

Trabon® MXP Divider Valve - 8 Section Tie Rod (3 Required) For use with Trabon® MXP Divider Valves. 8-Section Tie Rod Three required per assembly Lubriquip part number 527-300-320

GG 557772

ROD, TIE, MXP, 9 SECTION

Trabon® MXP Divider Valve - 9 Section Tie Rod (3 Required) For use with Trabon® MXP Divider Valves. 9-Section Tie Rod Three required per assembly Lubriquip part number 527-300-330

GG 557774

Plug, Enclosure, Mxp

GG 557776

PLUG, PORT IND

IMSP/MSV Indicator Port Plug

IMSP/MSV Indicator Port Plug

1/8 NPSF

Lubriquip part number 527-300-840

GG 557781

SWITCH, LIMIT SPDT

Replacement Low Level Switch, 15 Amp, SPDT For use with Modu-Flo and E-Series Pumps.

Replacement Low Level Switch for 563322

Lubriquip part number 529-726-001 Trabon part number 29726-1

GG 557799

SCREEN, FILTER

Filter Screen For use with Lube Master and LubePro Pump Packages.

Filter Screen

Lubriquip part number 534-304-003

GG 557801

SEAL, QUAD RING

Lubriquip part number 540-229-000 Trabon part number 40229

GG 557803

FILTER, 10 MICRON, 3-5/8" LG

Replacement Filter Cartridge, 10-micron Standard; Lubriquip part 540-271-001, replaces part 540-271-000 and Trabon part 40271; Genuine Trabon replacement element for Lubriquip assemblies 183-000-000, 183-000-001, 183-000-040, 183-000-041, 183-000-041, 183-000-140, 183-000-141 For use with Single and Dual Cartridge Filters.

10 micron Replacement Filter Element

2-5/8 in (67 mm) OD x 3-5/8 in (92 mm) Standard Length Element