Airpower | GRACO INC. S10595 branded products

GG 24C050

Kit, 1050P, Fluid Cover

$182.00

GG 24C133

Kit, Repair

$511.00

GG 236452

Kit, Foot, Rubber

$276.00

GG 236598

Kit, Repair

$397.00

GG 236859

Kit, Agitator, 2 Gal

$1,200.00

Kit, Access, Agitator, 2 Gallon

GG 236860

Kit, Access, Agitator, 2 Gallon

$289.50

GG 236873

Hose, Coupled, Air, 6 Ft

$236.00

GG 236588

Housing, Valve, Sst

$1,045.00

GG 236611

CHECK-MATE PUMP, SHOVEL

Graco 236611 8 cm Carbon Steel Pump Shovel

Model: Check-Mate

Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

Fluid Outlet Size (in): 1
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

For Use With: 65:1 King Pump

Maximum Flow Rate (GPM): 2.8

Maximum Operating Temperature ( degree F): 180

Maximum Pump Speed (CPM): 60

Maximum Working Pressure (psi): 5850

$6,870.00

GG 236789

Filter, Fluid, 3/8 Outlet

$266.50

GG 236893

Valve Seat

$166.00

GG 236763

METER, ELECTRONIC PULSE, EFC

Graco 236763 In-Line Meter with Pulse Output (Pints, Quarts, Gallons)

Accurately measure dispenses of petroleum- and synthetic-based oils (motor, gear and ATF.)

Application: Typical applications include service shops, Heavy-duty dealerships, and Fleet service facilities.

Provide pulse signal output.
Measures in pints, quarts, or gallons.

For Use With: Fluid Commander

Inlet Size (cm): 1.27
Inlet Size (in): 0.5
Inlet Size (mm): 12.7

Inlet Thread Type: NPT

Maximum Flow Rate (GPM): 12
Maximum Flow Rate (L/min): 45.6

Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500

Call for pricing

GG 236719

Helix, Assy Twistork

$1,360.00

GG 236677

KIT

Graco 236677 Bottom Outlet Kit for 5, 10 and 15 gallon (19, 38, 57 liter) pressure pots

$771.00

GG 236987

SWIVEL, HOSE

Graco 236987 High Pressure Fluid Line Swivel, 1/4 npsm(f) x 1/4 npsm(m) thread size, PTFE seals, 7400 psi max working pressure, Series B

1/4 NPS (m) x 1/4 NPS (f)
7400 psi
Straight Swivel

Stainless Steel

$229.50

GG 236663

AGITATOR, HEAVY DUTY, 15 GAL

15 Gallon (57 L) Heavy Duty Pressure Tank Agitator, air driven, 1/2 HP, 15 inches (38 cm) in length, gear reducedWaterborne compatible20:1 gear reduction to mix high viscosity materials, even at low speedsSealed agitator shaft to prevent air leakage and contaminationBuilt-in baffle and support for efficient mixingCompatible with Graco pressure tanks

$2,950.00

Kit, Repair

GG 236698

KIT, REPAIR

Graco 236698 Repair Kit for Viscount I Hydraulic Motor

$448.00

Agitator, Heavy Duty, 10 Gal

GG 236662

AGITATOR, HEAVY DUTY, 10 GAL

10 Gallon (38 L) Heavy Duty Pressure Tank Agitator, air driven, 1/2 HP, 15 inches (38 cm) in length, gear reducedWaterborne compatible20:1 gear reduction to mix high viscosity materials, even at low speedsSealed agitator shaft to prevent air leakage and contaminationBuilt-in baffle and support for efficient mixingCompatible with Graco pressure tanks

$2,780.00

Agitator, Heavy Duty, 5 Gal

GG 236661

AGITATOR, HEAVY DUTY, 5 GAL

5 Gallon (18 L) Heavy Duty Pressure Tank Agitator, air driven, 1/2 HP, 15 inches (38 cm) in length, gear reducedWaterborne compatible20:1 gear reduction to mix high viscosity materials, even at low speedsSealed agitator shaft to prevent air leakage and contaminationBuilt-in baffle and support for efficient mixingCompatible with Graco pressure tanks

$2,780.00

Agitator, Suction Twistork

GG 236629

AGITATOR, SUCTION TWISTORK

Twistork Drum Agitator, Siphon, Air, 3/4 HP, 47.5 in long, 304 SST, Adjustable Depth for 31.5-35.5 in DrumsHelix blade effectively mixes higher viscosity materialsMounts directly to 2 inch drum bungStainless and carbon steel material optionsSiphon model allows material transfer though agitator shaftSealed agitator drive prevents material contamination and evaporationATEX approval for hazardous locationsMax viscosity 10,000 cps

$3,220.00

Agitator, Sucton, Reversible, Twistrk

GG 236760

AGITATOR, SUCTON, REVERSIBLE, TWISTRK

Twistork Drum Agitator, Oil-less, Reversible, Siphon, Air, 3/4 HP, 47.5 in long, 304 SST, Adjustable for 31.5-35.5 in DrumsHelix blade effectively mixes higher viscosity materialsMounts directly to 2 inch drum bungStainless and carbon steel material optionsSiphon model allows material transfer though agitator shaftSealed agitator drive prevents material contamination and evaporationATEX approval for hazardous locationsMax viscosity 10,000 cps

$4,230.00

Glutton Pump, (4:1 Cs)

GG 237008

GLUTTON PUMP, (4:1 CS)

Glutton 4:1 Bellows Pump, CS, Series AThe Glutton plunger pump is ideal for air assisted and airless spray applications. It features a bellows seal that virtually eliminates the possibility of air or moisture contaminating the fluid. Pump ratios include 4:1, 12:1 and 25:1Bellows seal design provides low maintenance with no seals exposed to the atmosphere and eliminates conventional throat seals, providing high reliability for moisture-sensitive materialsDesigned to handle a broad range of applications, including abrasive materialsReversible outlet manifold simplifies plumbing installationsVertical ball checks design ensures uniform ball wear and long life

$8,940.00

Glutton Pump, (12:1 Cs)

GG 237009

GLUTTON PUMP, (12:1 CS)

Graco 237009 Glutton 12:1 Bellows Pump, CS, Series A

The Glutton plunger pump is ideal for air assisted and airless spray applications. It features a bellows seal that virtually eliminates the possibility of air or moisture contaminating the fluid. Pump ratios include 4:1, 12:1 and 25:1

Bellows seal design provides low maintenance with no seals exposed to the atmosphere and eliminates conventional throat seals, providing high reliability for moisture-sensitive materials
Designed to handle a broad range of applications, including abrasive materials
Reversible outlet manifold simplifies plumbing installations

Model: Glutton
Series: Bellows

Air Inlet Size (in): 0.5
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Circulation

Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, UV Coating, Stains, Varnish, CARC

Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: Sealed

Material: Carbon Steel

Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100

Maximum Continuous Cycle Rate (CPM): 60

Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 7.57

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Working Pressure (bar): 83
Maximum Working Pressure (kPa): 8300
Maximum Working Pressure (MPa): 8.3
Maximum Working Pressure (psi): 1200

Portable: Non-Portable

Pump Ratio: 12:1

Call for pricing

Glutton Pump, (4:1 Sst)

GG 237011

GLUTTON PUMP, (4:1 SST)

Glutton 4:1 Bellows Pump, SST, Series AThe Glutton plunger pump is ideal for air assisted and airless spray applications. It features a bellows seal that virtually eliminates the possibility of air or moisture contaminating the fluid. Pump ratios include 4:1, 12:1 and 25:1Bellows seal design provides low maintenance with no seals exposed to the atmosphere and eliminates conventional throat seals, providing high reliability for moisture-sensitive materialsDesigned to handle a broad range of applications, including abrasive materialsReversible outlet manifold simplifies plumbing installationsVertical ball checks design ensures uniform ball wear and long life

$13,120.00

Glutton Pump, (25:1 Sst)

GG 237013

GLUTTON PUMP, (25:1 SST)

Glutton 25:1 Bellows Pump, SST, Series AThe Glutton plunger pump is ideal for air assisted and airless spray applications. It features a bellows seal that virtually eliminates the possibility of air or moisture contaminating the fluid. Pump ratios include 4:1, 12:1 and 25:1Bellows seal design provides low maintenance with no seals exposed to the atmosphere and eliminates conventional throat seals, providing high reliability for moisture-sensitive materialsDesigned to handle a broad range of applications, including abrasive materialsReversible outlet manifold simplifies plumbing installationsVertical ball checks design ensures uniform ball wear and long life

$13,550.00

Fast-Flo Pump, (1:1)

GG 237131

FAST-FLO PUMP, (1:1)

Graco 237131 1:1 Ratio Fast-Flo Air Operated Stubby Piston Transfer Pump

Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.

Application: Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 psi (12 bar). Ideal for lower viscosity fluids.

Air-powered for high reliability and low cost
Delivery up to 5 gpm (19 lpm)
Available in stainless steel or carbon steel

Model: Fast-Flo

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Compatible Drum Height (in): 7.1

Compatible Material: Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink

Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Material: Carbon Steel

Maximum Air Inlet Pressure (bar): 12.41
Maximum Air Inlet Pressure (kPa): 1241
Maximum Air Inlet Pressure (psi): 180

Maximum Continuous Cycle Rate (CPM): 100

Maximum Flow Rate (GPM): 4
Maximum Flow Rate (L/min): 15.1

Maximum Intermittent Cycle Rate (CPM): 4

Maximum Working Pressure (bar): 12.4
Maximum Working Pressure (kPa): 1240
Maximum Working Pressure (MPa): 1.2
Maximum Working Pressure (psi): 180

Minimum Flow Rate (GPM): 180

Package Options: None

Portable: Non-Portable

Power Type: Pneumatic

Pump Ratio: 1:1

Call for pricing

Fast-Flo Pump, (1:1) repl by GG 2007313

GG 237132

FAST-FLO PUMP, (1:1)

Graco 237132 1:1 Ratio Fast-Flo Air Operated Piston Transfer Stainless Steel Stubby Pump with PTFE Packings

Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.

Application: Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 psi (12 bar). Ideal for lower viscosity fluids.

Air-powered for high reliability and low cost
Delivery up to 5 gpm (19 lpm)
Available in stainless steel or carbon steel

Model: Fast-Flo

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Compatible Drum Height (in): 9.8

Compatible Material: Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink

Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Material: Stainless Steel

Maximum Air Inlet Pressure (bar): 12.41
Maximum Air Inlet Pressure (kPa): 1241
Maximum Air Inlet Pressure (psi): 180

Maximum Continuous Cycle Rate (CPM): 100

Maximum Flow Rate (GPM): 4
Maximum Flow Rate (L/min): 15.1

Maximum Intermittent Cycle Rate (CPM): 4

Maximum Working Pressure (bar): 12.4
Maximum Working Pressure (kPa): 1240
Maximum Working Pressure (MPa): 1.2
Maximum Working Pressure (psi): 180

Minimum Flow Rate (GPM): 180

Package Options: None

Portable: Non-Portable

Power Type: Pneumatic

Pump Ratio: 1:1

$3,050.00

3:1 President

GG 237143

PRESIDENT PUMP

President 3:1 Pneumatic 2-Ball Piston Pump, CS, Stubby, 3 Leather/ 2 PTFE Seals2-ball pneumatic piston pumps for a wide range of applications.Reliable President air motor designed for low maintenance operation and long lifePositive displacement, 2-ball piston design provides uniform and easily controlled deliveryStainless steel or carbon steel models available to handle various fluids, including catalyzed materials

$7,770.00

Pump, President, 3:1, SST, 55 Gl

GG 237145

PRESIDENT PUMP, 3:1, SST, 55 GL

Graco 237145 President 3:1 Pneumatic 2-Ball Piston Pump, SST, Drum, 5 PTFE Seals

2-ball pneumatic piston pumps for a wide range of applications.

Reliable President air motor designed for low maintenance operation and long life
Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
Stainless steel or carbon steel models available to handle various fluids, including catalyzed materials

Model: President
Series: 2-Ball

Air Inlet Size (in): 3/8
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPSM

Application: Supply

Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish

Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball

Includes: Drum Length

Material: Stainless Steel

Maximum Air Inlet Pressure (bar): 8.27
Maximum Air Inlet Pressure (kPa): 827
Maximum Air Inlet Pressure (psi): 120

Maximum Continuous Cycle Rate (CPM): 60

Maximum Flow Rate (GPM): 10
Maximum Flow Rate (L/min): 37.85

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Working Pressure (bar): 124
Maximum Working Pressure (kPa): 12400
Maximum Working Pressure (MPa): 12.4
Maximum Working Pressure (psi): 1800

Portable: Non-Portable

Pump Ratio: 3:1

$12,080.00

Dispenser, Wws

GG 237161

DISPENSER, WWS

Husky 307 Series Pre-Mixed Windshield Wash Solvent and Coolant Dispense Diaphragm Pump Package

GG 237306

COVER, DRUM ASSEMBLY

Graco 237306 Drum Cover for President, Monark, Standard, and Fast-Flo Pumps (Standard and Fast-Flo require adaptor plate), Series A

$859.00

PUMP, FAST-FLO, LOWER

GG 237449

PUMP, FAST-FLO, LOWER

$1,420.00

VALVE, BALL, HEAVEY DUTY

GG 237469

VALVE, BALL, HEAVEY DUTY

$284.00

Kit, Filter, Fluid

GG 237481

Kit, Filter, Fluid

$320.00

B/P Regulator, 1/2In, Ss, 5-180 psi

GG 237503

REGULATOR, BACK PRESSURE

Graco 237503 Back Pressure Regulator, Bare, Low Pressure, 180 Max psi, SST, Manual, 3/8 npt(f) inlet x 1/2 npt(f) outlet

237503 is the back pressure regulator only. Part number 236770 includes the gauge, tube, inlet adapter and outlet swivel union. Graco back pressure regulators maintain the system pressure, regardless of flow demand

Compact and lightweight design saves space and reduces payload for small circulation systems
Tungsten and carbide materials ensure low wear and long life
PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness

Compatible Material: Catalyst, Waterborne

Gauge Port Size (cm): 0.635
Gauge Port Size (in): 1/4
Gauge Port Size (mm): 6.35

Gauge Port Type: NPT

Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525

Inlet Thread Type: NPT

Maximum Flow Rate (GPM): 4.3
Maximum Flow Rate (L/min): 16.28

Maximum Regulated Pressure (bar): 12.4
Maximum Regulated Pressure (kPa): 1240
Maximum Regulated Pressure (psi): 180

Maximum Viscosity (cP): 1000

Maximum Working Pressure (bar): 21
Maximum Working Pressure (kPa): 2100
Maximum Working Pressure (psi): 300

Minimum Regulated Pressure (bar): 0.3
Minimum Regulated Pressure (kPa): 30
Minimum Regulated Pressure (MPa): 0.03
Minimum Regulated Pressure (psi): 5

Outlet Size (cm): 1.27
Outlet Size (in): 1/2
Outlet Size (mm): 12.7
Outlet Thread Type: NPT

$641.00

Pump, Lower, Dura-Flo 1200 (290 cc), SST, Severe-Duty Rod and Cylinder

GG 237514

Pump, Lower, Dura-Flo 1200 (290 cc), SST, Severe-Duty Rod and Cylinder

$13,950.00

Hose, Coupled

GG 237522

HOSE, COUPLED

Graco 237522 Nylon Coupled Hose, 6 ft (1.8 m) long, 1 in. (25 mm) ID for 10:1 Bulldog Portable Hydra-Clean Unit

$245.00

Kit, Handle

Kit, Air Control

GG 237579

KIT, AIR CONTROL

$920.00

Housing, Valve

GG 237574

Housing, Valve

$2,470.00

Kit, Needle, Taper, Valve Seat

GG 237596

KIT, NEEDLE,TAPER,VALVE SEAT

Graco 237596 7.5 degree Carbide Needle, Seat, Urethane seal

KIT INCLUDES: SEAT, VALVE ASSY [QTY. 1], STEM, VALVE, ASSY [QTY. 1], PACKING, O-RING [QTY. 1], SEAL, BLOCK VEE, .375 ODX.125 ID [QTY. 1], NUT [QTY. 1], PACKING, O RING [QTY. 1], RING, RETAINING [QTY. 2], ROD, [QTY. 1]

Compatible Material: Sealants, Adhesives

$400.00

Kit, Repair, Lower

GG 237602

Kit, Repair, Lower

$353.00

Trigger

GG 237604

Trigger

$92.00

Plug, Drum Cover

GG 237606

Plug, Drum Cover

$123.00

Ball Valve

GG 237534

VALVE, BALL

Low Pressure Ball Valve compatible with stainless steel, catalyst and waterborne materials, 3/8 in. npt(f) x 3/8 in. npt(m)

Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.

Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materialsMany different connection options to meet your specific needs

$92.75

Kit, Repair, Throat

GG 237905

Kit, Repair, Throat

$786.00

Kit, Repair, Valve, Purge

GG 237948

Kit, Repair, Valve, Purge

$811.00

Kit, Repair, Uhmwpe

GG 237713

Kit, Repair, Uhmwpe

$437.00

Kit, Strainer

GG 237840

KIT, STRAINER

Inlet Strainer, SST Cap, 1 1/4 inUsing an Inlet Strainer is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time.

$45.00

HOUSING, VALVE

GG 237978

HOUSING, VALVE

$1,165.00

Cover, Drum, Assembly

GG 238008

COVER, DRUM, ASSEMBLY

Compatible Material: Catalyst, Waterborne

$1,075.00

Kit, Repair, Priming Piston

GG 237909

Kit, Repair

$458.00

Fireball 425 Pump, 6:1

GG 238108

FIREBALL 425 PUMP, 6:1

Fire-BallÂ® 425 Series 6:1 Universal Size Oil Pump

With a large 4.25 inch (107.9 mm) air motor to supply the power you need for long pipe runs and higher volume dispensing, the Fire-Ball 425 delivers field-proven durability for multiple fluid types and exceptional cost savings that are hard to beat!

The Fire-Ball 425 is the pump of choice for your most demanding high volume applications - an ideal choice for applications such as truck fleet service facilities and in-plant applications where multiple dispenses happen at the same time.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$6,040.00

Bearing, Forumla Gun

GG 23768-01

Bearing, Forumla Gun

$34.50

Agitator, Heavy Duty, Sst

GG 238157

AGITATOR, HEAVY DUTY, SST

Heavy Duty Back-Geared Drum Agitator, air driven, 1/2 HP, 32 inches (81.25 cm) tall. Drum Cover (238283) and Siphon Kit (238250) not includedHeavy duty gearbox mixes high viscosity materials
Maximum viscosity 3,000 cpsDrum cover and siphon kit are not included, but they can be ordered separately as these part numbers: 238283 (drum cover), 238250 (siphon kit)Leak-free and oil-less gearbox prevents material contaminationStainless steel agitator is corrosion resistant and waterborne compatibleTwin paddles thoroughly mix finishing materialsAccess port for easy sampling and inspection of material during operation

$3,050.00

Kit, Repair, Uhmwpe/Tfe, 33:1 Cs

GG 237608

Kit, Repair, Uhmwpe/Tfe, 33:1 Cs

$390.00

Throat Seal Liquid, 4 OZ

GG 238049

TSL FLUID, 4 OZ

TSL Throat Seal Liquid, 4 ozThroat Seal Liquid (TSL) prevents paint and coatings from drying onto the displacement rod and packings, extending the life of the pump.Maintaining your pump is essential for long life and reliability.

$10.80

Stellair ACE Air Spray Gun, W/ 6 Ft Hoses, .042 In (1.1 MM) Nozzle

GG 2005974

STELLAIR ACE GUN, COMPLIANT, .042, WITH HOSE

Stellair ACE Air Spray Gun with Hose, .042 in (1.1 mm) Nozzle SizeThe unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer.Whether youâ€™re a custom shop or high volume factory, Stellair ACE brings all-star atomization, carbon fiber construction and ergonomics to metal, plastic, and wood finishing.Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.Air cap stays clean while delivering atomization that results in industry leading finish quality.Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.Hoses with swivel attachments move with you at any angle, preventing tripping and injury.One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.No tools are needed to service or maintain.

$893.00

Needle and Washer Kit

GG 2006024

KIT, NEEDLE AND WASHER, .051, .055, .070

Needle and Washer Kit

$37.10

Fluid Cartridge Kit, .055, SST

GG 2004199

Fluid Cartridge Kit, .055, SST

$190.50

6 ft (1.8 m) Fluid Whip Hose

GG 2005146

6 ft (1.8 m) Fluid Whip Hose

$37.10

Hose, Coupled, Fluid, Whip, Conductive, QC

GG 2005144

6ft Air Whip Hose

$37.10

Stellair ACE Air Spray Gun, W/ 6 Ft Hoses, .070 In (1.8 MM) Nozzle

GG 2005976

GUN, COMPLIANT, .070, WITH HOSE

Stellair ACE Air Spray Gun with Hose, .070 in (1.8 mm) Nozzle SizeThe unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer.Whether youâ€™re a custom shop or high volume factory, Stellair ACE brings all-star atomization, carbon fiber construction and ergonomics to metal, plastic, and wood finishing.Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.Air cap stays clean while delivering atomization that results in industry leading finish quality.Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painterâ€™s hand.Hoses with swivel attachments move with you at any angle, preventing tripping and injury.One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

$893.00

Fluid and Needle Cartridge Kit, .070 SS Tip

GG 2004200

Fluid and Needle Cartridge Kit, .070 SS Tip

$190.50

Kit, Air Cap, Wide Pattern

GG 2004532

Kit, Air Cap, Wide Pattern

$132.50

Kit, Air Cap Compliant, General Industry

GG 2004526

Kit, Air Cap Compliant, General Industry

$132.50

STELLAIR AIR SPRAY GUN, HVLP. 0.030 IN (0.8 MM). GENERAL INDUSTRY

GG 2006145

GUN, HVLP (.030)

Graco 2006145 Stellair Air Spray Gun, HVLP, 0.030 in (0.8 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results. Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Swivel and hose move with you at any angle, preventing

$630.00

Kit, Aircap, Compliant

GG 2005151

KIT, AIRCAP, LVMP

LVMP/HVLP Aircap Kit

$132.50

Stellair Air Spray Gun, HVLP, 0.086 In. (2.2 MM), PEEK Tip, General Industry

GG 2006146

GUN, HVLP (.086)

Graco 2006146 Stellair Air Spray Gun, HVLP, 0.086 in (2.2 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

$630.00

Stellair Air Spray Gun, HVLP, 0.110 In. (2.8 MM), PEEK Tip, General Industry

GG 2006147

GUN, HVLP (.110)

Graco 2006147 Stellair Air Spray Gun, HVLP, 0.110 in (2.8 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related

$630.00

Stellair, Air Spray Gun Conventional, 1.1mm

GG 2006151

GUN, CONVENTIONAL (.042) WATERBORNE

Graco 2006151 Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direc

$473.00

Stellair Air Spray Gun, Compliant, 0.059 In. (1.5 MM), Carbide Tip, High Solids

GG 2006153

GUN, COMPLIANT (.059) HIGH WEAR

Graco 2006153 Stellair Air Spray Gun, Compliant, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means lit

$893.00

Stellair Air Spray Gun, Conventional, 0.059 In. (1.5 MM), Carbide Tip, High Solids

GG 2006152

GUN, CONVENTIONAL (.059) HIGH WEAR

Graco 2006152 Stellair Air Spray Gun, Conventional, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct

$735.00