GRACO INC. S10595

GG CM3569

Check-Mate Supply Unit, 29:1, 3.0 Ram, 200L

GG CM394B

Check-Mate Supply Unit, 55:1, 0 Volt, D60, 20L

GG CM3957

Check-Mate Supply Unit, 55:1, 3.0 Ram, 30Gal

GG CM395B

Check-Mate Supply Unit, 55:1, 0 Volt, D200, 20L

GG CM395S

Check-Mate Supply Unit, 55:1, 0 Volt, D200, 60L

GG CM3969

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM396A

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM397A

Check-Mate Supply Unit, 55:1, 6.5 Ram, 200L

GG CM3989

Check-Mate Supply Unit, 55:1, 6.5 Ram, 200L

GG CM3F4F

Check-Mate Supply Unit, 55:1, 0 Volt, D60, 20L

GG CM3F5L

Check-Mate Supply Unit, 55:1, 0 Volt, D200, 30L

GG CM3F69

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM3F7A

Check-Mate Supply Unit, 55:1, 6.5 Ram, 200L

GG CM3G4F

Check-Mate Supply Unit, 55:1, 0 Volt, D60, 20L

GG CM3G5A

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM3G79

Check-Mate Supply Unit, 55:1, 6.5 Ram, 200L

GG CM3HH9

Check-Mate Supply Unit, 55:1 Smr, 6.5 Ram, 200L

GG CM3S79

Check-Mate Xl Supply Unit, 85:1, 6.5 Ram, 200L

GG CM4A3B

CHECK-MATE SUPPLY UNIT, 05:1, 0 VOLT, S20, 20L

5:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM515N

Check-Mate Supply Unit, 14:1, 3.0 Ram, 200L

GG CM53BN

Check-Mate Supply Unit, 14:1 Smart, 3.0 Ram, 200L

GG CM595A

CHECK-MATE SUPPLY UNIT,26:1,3.0 RAM,200L

Graco CM595A 26:1 Ratio 200 L 3.0 RAM Supply Unit with Neoprene Wiper Plate

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

GG CM5969

Check-Mate Supply Unit, 26:1, 3.0 Ram, 200L

GG CM5979

Check-Mate Supply Unit, 26:1, 6.5 Ram, 200L

GG CM5F59

Check-Mate Supply Unit, 26:1, 3.0 Ram, 200L

GG CM5F5A

Check-Mate Supply Unit, 26:1, 3.0 Ram, 200L

GG CM5G59

Check-Mate Supply Unit, 26:1, 3.0 Ram, 200L

GG CM5G5A

Check-Mate Supply Unit, 26:1, 3.0 Ram, 200L

GG CM5G79

Check-Mate Supply Unit, 26:1, 6.5 Ram, 200L

GG CM5G89

Check-Mate Supply Unit, 26:1, 6.5 Ram, 200L

GG CM5L79

CHECK-MATE SUPPLY UNIT, 42:1, 6.5 RAM, 200L

42:1 Ratio 200 L 6.5 RAM Supply Unit with EPDM Wiper Plate

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. For large drums up to 200 liter (55 gal) Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM5R79

Check-Mate Supply Unit, 42:1, 6.5 Ram, 200L

GG CM5R7A

Check-Mate Supply Unit, 42:1, 6.5 Ram, 200L

GG CM5S79

Check-Mate Supply Unit, 42:1, 6.5 Ram, 200L

GG CM6A3C

CHECK-MATE SUPPLY UNIT, 11:1, 0 VOLT, S20, 20L

Supply Unit, Check-Mate, 11:1, C/S, Severe Duty, 3 in. S20 Ram, Integrated Air Controls, 20L C/S Flat Platen, Single PU Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM7A3H

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

20:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM7A5A

CHECK-MATE SUPPLY UNIT,20:1,0 VOLT,D200,200L

Graco CM7A5A 20:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

GG CM7C59

Check-Mate Supply Unit, 20:1, 0 Volt, D200, 200L

GG CM7F59

Check-Mate Supply Unit, 20:1, 0 Volt, D200, 200L

GG CM9A3C

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

61:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM9A3H

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

61:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CM9A5A

CHECK-MATE SUPPLY UNIT,61:1,0 VOLT,D200,200L

Graco CM9A5A 61:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

GG CM9C2F

Check-Mate Supply Unit, 61:1, 0 V, S20 Cart, 20L

GG CM9C59

Check-Mate Supply Unit, 61:1, 0 Volt, D200, 200L

GG CM9C5A

Check-Mate Supply Unit, 61:1, 0 Volt, D200, 200L

GG CM9F2B

Check-Mate Supply Unit, 61:1, 0V, S20 Cart, 20L

GG CM9F2F

Check-Mate Supply Unit, 61:1, 0 V, S20 Cart, 20L

GG CM9F3F

Check-Mate Supply Unit, 61:1, 0 Volt, S20, 20L

GG CM9F5A

Check-Mate Supply Unit, 61:1, 0 Volt, D200, 200L

GG CM9F59

Check-Mate Supply Unit, 61:1, 0 Volt, D200, 200L

GG CM9GLB

CHECK-MATE SUPPLY UNIT, 61:1, 120VAC, S20, 20L

61:1 Ratio 20 L 120 VAC S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

GG CMNN59

Check-Mate Supply Unit 3.0 Ram, 200L

GG CMNN5A

Check-Mate Supply Unit, 3.0 Ram, 200L

GG CMNN79

Check-Mate Supply Unit, 6.5 Ram, 200L

GG CS00F1

FUSION CS GUN, FL0000, FT0424

Graco CS00F1 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS00F2

FUSION CS GUN, FL0000, FT0438

Graco CS00F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.097
• Fluid Orifice Size (in): 0.038
• Fluid Orifice Size (mm): 0.97

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS00F3

FUSION CS GUN, FL0000, FT0624

Graco CS00F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maxim

GG CS00F4

FUSION CS GUN, FL0000, FT0638

Graco CS00F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maxim

GG CS00F5

Fusion Cs Gun, Fl0000, Ft0838

GG CS00F6

FUSION CS GUN, FL0000, FT0848

Graco CS00F6 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.048 in (1.2 mm) Spray Tip, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.074
• Fluid Orifice Size (in): 0.029
• Fluid Orifice Size (mm): 0.74

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS00WD

FUSION CS GUN, WD0000

Graco CS00WD Fusion CS Gun, 15 in (381 mm) Wide Round Spray Pattern, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.071
• Fluid Orifice Size (in): 0.028
• Fluid Orifice Size (mm): 0.71

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.70
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa):

GG CS01F1

Fusion Cs Gun, Fl0101, Ft0424

GG CS01F3

FUSION CS GUN, FL0101, FT0624

Graco CS01F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.061
• Fluid Orifice Size (in): 0.024
• Fluid Orifice Size (mm): 0.61

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 241

GG CS01F2

FUSION CS GUN, FL0101, FT0438

Graco CS01F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS01F4

FUSION CS GUN, FL0101, FT0638

Graco CS01F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temper

GG CS01F5

FUSION CS GUN, FL0101, FT0838

Graco CS01F5 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS01F6

Fusion Cs Gun, Fl0101, Ft0848

GG CS01RD

FUSION CS GUN, RD0101

Fusion CS Gun, Round Spray Pattern, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

For high output spray polyurethane foam and polyurea applications. New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge Removes foam and keeps mix chamber clear Saves almost an hour of maintenance time each spray day First-ever liquid purge – reduces purge air by 75% and minimizes foam blowback Easy-to-insert cartridge fits into ergonomic handle

Variable flow - an industry first

• First plural-component gun with variable flow
• Switch from large to small spray patterns in seconds
• Gives you more maneuverability to spray in small, tight areas
• Ten different settings

Quick-change front - simpler and cleaner

• Swap out fluid heads in seconds
• Non-stick polymer cover keeps gun head cleaner
• "Air knife" reduces material build-up
• Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

GG CS01WD

FUSION CS GUN, WD0101

Graco CS01WD Fusion CS Gun, 16 in (406 mm) Wide Round Spray Pattern, 0.042 in (1.6 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.099
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 0.99

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.00
• Includes: Mix Chamber

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa):

GG CS02F1

FUSION CS GUN, FL0202, FT0424

Graco CS02F1 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS02F2

FUSION CS GUN, FL0202, FT0438

Graco CS02F2 Fusion CS Gun, 8-10 in (203-254 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG CS02F3

FUSION CS GUN, FL0202, FT0624

Graco CS02F3 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.024 in (0.61 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS02F4

FUSION CS GUN, FL0202, FT0638

Graco CS02F4 Fusion CS Gun, 12-14 in (305-356 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximu

GG CS02F5

FUSION CS GUN, FL0202, FT0838

Graco CS02F5 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.038 in (0.96 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Foam, Polyurea
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Max

GG CS02F6

FUSION CS GUN, FL0202, FT0848

Graco CS02F6 Fusion CS Gun, 16-18 in (406-457 mm) Flat Spray Pattern, 0.048 in (1.2 mm) Spray Tip, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first
  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings
• Quick-change front - simpler and cleaner
  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

• Model: Fusion CS
• Series: Flat

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPT

• Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Activation: Manual
• Gun Type: Liquid-Purge
• Gun Weight (g): 1180
• Gun Weight (kg): 1.18
• Gun Weight (lb): 2.6
• Gun Weight (oz): 41.6

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.30
• Includes: Mix Chamber, Flat Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate (kg/min): 11.3
• Maximum Flow Rate (lb/min): 25
• Maximum Flow Rate @ PSI (lb/min): 25

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature (°C): 93
• Maximum Fluid Temperature (°F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum

GG 81/1061-7/25

Connector, Plug, 7P, M, 7A, Ser 1

GG 81/1061-7H/25

Connector, Plug, 7P, M, 13A

GG 81/1063/11

Key, Connector, Ser 1

GG 81/1064-1/11

Pin, #20-24Awg, Ser1, Tin Contact

GG 81/1060-7A/25

Connector, Fh, 7P W/Key, 7A, Free Hang

GG 81/1064-2/11

Socket, #20-24Awg, Ser 1, Tin

GG 81/9996-R/11

Coupler, F, 18-22Awg

GG 81/1096-B/11

Battery, Backup, 200 Day, S7200 Plc

GG 81/1064-4/11

Connector, Socket, #14-18Awg, Ser1, Tin

GG 8100

Kit, Parts, Filter, 2 Pk

GG 8125

Kit, Parts, Filter, 25 Pak

GG 8130

Filter, Air, Sharpe, F88

GG 814-0004

Kit, High-Clean Stand Wheels

GG 814-0053

Kit, Control Cover, Ind

GG 814-0055

Kit, Control Cover, Ind, Haz

GG 814-0057

Screw

GG 814-0059

Pin

GG 814-0061

Kit, Preload Nut

GG 814-0063

Kit, Stator Cap, I30

GG 814-0065

Kit, Stator Cap, I80

GG 814-0066

Kit, Stator Cap, H80

GG 814-0067

Kit, Stator Cap, I120

GG 814-0068

Kit, Stator Cap, H120

GG 814-0069

Screw, Pan, Hd, Ext Tooth

GG 814-0070

Spacer, Standoff, #8-32X.5In