Airpower | GRACO INC. S10595 branded products

Valve, Relief, Indicator, O-Ring, 3000 psi

GG 563176

Valve, Relief, Indicator, O-Ring, 3000 Psi

$30.20

GG 563178

COUPLING, EXT 1/8F TO 1/8M

Pipe Extension - 1/8 NPT Male X 1/8 NPT Female, 2-1/4 Long

Pipe Fittings - Extension Nipple - 1/8 inch (6.4 mm) Female x 1/8 inch (6.4 mm) Male, 2-1/4 inch (5.7 cm) Length, Steel

Lubriquip part number 509-020-000 Trabon part number 9020

$34.50

INDICATOR, RUPTURE, 1/4 NPTF, 1450 PSI

GG 563179

INDICATOR, RUPTURE, 1/4 NPTF, 1450 PSI

Rupture-to-Atmosphere Indicators for MX Divider Valves - 1450 psi, 1/4 inch-18 inch NPT(f) - Oil Rupture-to-Atmosphere Indicators for use with MX Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-206-100 Trabon part number 9206-10

$38.50

Fitting, Blowout 1/4Bspp 1450 psi

GG 563181

Fitting, Blowout 1/4Bspp 1450Psi

$762.00

INDICATOR, RUPTURE, 1/4 NPTF, 1750 PSI

GG 563182

INDICATOR, RUPTURE, 1/4 NPTF, 1750 PSI

Rupture-to-Atmosphere Indicators for MX Divider Valves - 1750 psi, 1/4 inch-18 inch NPT(f) Rupture-to-Atmosphere Indicators for use with MX Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-206-120 Trabon part number 9206-12

$38.50

INDICATOR, RUPTURE, 1/4 NPTF, 2950 PSI

GG 563185

INDICATOR, RUPTURE, 1/4 NPTF, 2950 PSI

Rupture-to-Atmosphere Indicators for MX Divider Valves - 2950 psi, 1/4 inch-18 inch NPT(f) Rupture-to-Atmosphere Indicators for use with MX Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-206-200 Trabon part number 9206-20

$38.50

GG 563186

Valve, Relief, 1/4 1450 Psi

$105.00

GG 563188

Valve, Relief, 1/4 2350 Psi

$105.00

INDICATOR, RUPTURE, 1/8 NPTF, 2350 PSI

GG 563191

INDICATOR, RUPTURE, 1/8 NPTF, 2350 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 2350 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-230-160 Trabon part number 9230-16

$38.50

INDICATOR, RUPTURE, 1/8 NPTF, 2950 PSI

GG 563192

INDICATOR, RUPTURE, 1/8 NPTF, 2950 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 2950 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-230-200 Trabon part number 9230-20

$38.50

INDICATOR, RUPTURE, 1/8 NPTF, 3250 PSI

GG 563193

INDICATOR, RUPTURE, 1/8 NPTF, 3250 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 3250 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-230-220 Trabon part number 9230-22

$38.50

INDICATOR, RUPTURE, 1/8 NPTF, 5000 PSI

GG 563194

INDICATOR, RUPTURE, 1/8 NPTF, 5000 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 5000 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-230-350 Trabon part number 9230-35

$38.50

GG 563195

VALVE, CHECK 1/8 10 PSI

Single Ball Check Valve - 10 psi Nominal Cracking Pressure, 1/8 in NPTF (M) x 1/8 in NPSF (F), Steel, 5,000 psi

Single Ball Check Valve

10 psi nominal cracking pressure

1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)

steel body/ball

5,000 psi max

Lubriquip part number 509-350-010 Trabon part number 9350-10

$27.90

GG 563197

VALVE, CHECK 1/8 125 PSI

Single Ball Check Valve - 125 psi Nominal Cracking Pressure, 1/8 in NPTF (M) x 1/8 in NPSF (F), Steel, 5,000 psi

Single Ball Check Valve

125 psi nominal cracking pressure

1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)

steel body/ball

5,000 psi max

Lubriquip part number 509-350-120 Trabon part number 9350-125

$27.90

VALVE, CHECK, 1/8 NPT, REV, 5000

GG 563199

VALVE, CHECK, 1/8 NPT, REV, 5000

Single Ball Check Valve - 15 psi Nominal Cracking Pressure, 1/8 in NPSF (F) x 1/8 in NPTF (M), Steel, 5,000 psi

Single Ball Check Valve

15 psi nominal cracking pressure

1/8 inch (3.2 mm) NPSF (F) x 1/8 inch (3.2 mm) NPTF (M)

steel body/ball

5,000 psi max

Lubriquip part number 509-355-010 Trabon part number 9355-15

$69.75

VALVE, CHECK 1/4 1/8NPT TW TAN

GG 563203

VALVE, CHECK 1/4 1/8NPT TW TAN

Double Ball Check Valve - 45 psi Nominal Cracking PSI, Twin Tandem, 1/4 in NPTF (M) x 1/8 in NPTF (M), SST, 10000 psi

Double Ball Check Valve, Twin Tandem

45 psi nominal cracking pressure

1/4 inch (6.4 mm) NPTF (M) x 1/8 inch (3.2 mm) NPTF (M)

steel body/ball

10,000 psi max

Lubriquip part number 509-356-060

$571.00

GG 563205

Valve, Check Twin Tandem

$304.00

GG 563206

VAVLE, CHECK, 1/4 NPT, 10

Single Ball Check Valve - 10 psi Nominal Cracking Pressure, 1/4 in (M) x 1/ in (F), Steel, 5,000 psi

10 psi (.69 bar) nominal cracking pressure

1/4 inch (6.4 mm) (M) x 1/4 inch (6.4 mm) (F)

Steel Body/Ball

5,000 psi (344.7 bar) max

Lubriquip part number 509-360-010

$33.20

GG 563208

Valve, Check, 1/4 Npt, 100

$41.10

VALVE, CHECK, 1/4 NPT, REV, 5000

GG 563210

VALVE, CHECK, 1/4 NPT, REV, 5000

Single Ball Check Valve - 10 psi Nominal Cracking Pressure, 1/4 in NPSF (F) x 1/4 in NPTF (M), Steel, 5,000 psi

Double Ball Check Valve

10 psi nominal cracking pressure

1/4 inch (6.4 mm) NPSF (F) x 1/4 inch (6.4 mm) NPTF (M)

steel body/ball

5,000 psi max

Lubriquip part number 509-365-010 Trabon part number 9365-10

$43.90

INDICATOR, RUPTURE, 1/8 NPTF, 4600 PSI

GG 563216

INDICATOR, RUPTURE, 1/8 NPTF, 4600 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 4600 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-494-120 Trabon part number 9494-120

$38.50

INDICATOR, RUPTURE, 1/8 NPTF, 5500 PSI

GG 563218

INDICATOR, RUPTURE, 1/8 NPTF, 5500 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 6400 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-494-160 Trabon part number 9494-160

$38.50

INDICATOR, RUPTURE, 1/8 NPTF, 7300 PSI

GG 563219

INDICATOR, RUPTURE, 1/8 NPTF, 7300 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 7300 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-494-200 Trabon part number 9494-200

$38.50

INDICATOR, RUPTURE PIN, 1/8 NPTF, 3700 PSI

GG 563220

INDICATOR, RUPTURE PIN, 1/8 NPTF, 3700 PSI

Trabon® Replacement Rupture Indicator, 1/8-27 NPTF, 3700 psi (255 bar)

Trabon Performance Indicators are pressure-sensitive devices that pinpoint excessive pressure in Trabon series progressive lubricating systems. These devices, which are installed in the alternate outlet ports of divider valves, signal a fault either by causing an indicator pin to protrude or by releasing lubricant to the atmosphere. All Performance Indicators respond quickly to protect the lube system and locate lube line blockage.

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar). High pressure from blockage causes a disc to rupture. Lubricant forces an indicator pin to protrude, indicating the blockage. High pressure backs up through the system and trips a switch to shut the system off. When fault is corrected, disc must be replaced and pin reset. Divider Valve Rupture Indicators w/Memory - 3,700 psi (255 bar) Lubriquip part number 509-499-100 Trabon part number 9499-10

$70.00

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 3700 PSI

GG 563221

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 3700 PSI

Trabon® Replacement Rupture Indicator, 1/8-27 NPSF with O-Ring, 3700 psi (255 bar)

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

High pressure from blockage causes a disc to rupture Lubricant forces an indicator pin to protrude, indicating the blockage High pressure backs up through the system and trips a switch to shut the system off When fault is corrected, disc must be replaced and pin reset Lubriquip part number 509-499-105

$73.50

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 4600 PSI

GG 563222

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 4600 PSI

Trabon® Replacement Rupture Indicator, 1/8-27 NPSF with O-Ring, 4600 psi (317 bar)

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

High pressure from blockage causes a disc to rupture Lubricant forces an indicator pin to protrude, indicating the blockage High pressure backs up through the system and trips a switch to shut the system off When fault is corrected, disc must be replaced and pin reset Lubriquip part number 509-499-125

$73.50

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 5500 PSI

GG 563224

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 5500 PSI

Trabon® Replacement Rupture Indicator, 1/8-27 NPSF with O-Ring, 5500 psi (379 bar)

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

High pressure from blockage causes a disc to rupture Lubricant forces an indicator pin to protrude, indicating the blockage High pressure backs up through the system and trips a switch to shut the system off When fault is corrected, disc must be replaced and pin reset Lubriquip part number 509-499-145

$95.00

INDICATOR, RUPTURE PIN, 1/8 NPTF, 2800 PSI

GG 563228

INDICATOR, RUPTURE PIN, 1/8 NPTF, 2800 PSI

Replacement Rupture Indicator, 1/8-27 NPTF, 2800 psi (193 bar)

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

High pressure from blockage causes a disc to rupture

Lubricant forces an indicator pin to protrude, indicating the blockage

High pressure backs up through the system and trips a switch to shut the system off

When fault is corrected, disc must be replaced and pin reset

Lubriquip part number 509-499-620

$68.25

INDICATOR, RUPTURE PIN, 1/8 NPTF, 6400 PSI

GG 563225

INDICATOR, RUPTURE PIN, 1/8 NPTF, 6400 PSI

Trabon® Replacement Rupture Indicator, 1/8-27 NPTF, 6400 psi (441 bar)

Trabon Performance Indicators are pressure-sensitive devices that pinpoint excessive pressure in Trabon series progressive lubricating systems. These devices, which are installed in the alternate outlet ports of divider valves, signal a fault either by causing an indicator pin to protrude or by releasing lubricant to the atmosphere. All Performance Indicators respond quickly to protect the lube system and locate lube line blockage.

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar). High pressure from blockage causes a disc to rupture. Lubricant forces an indicator pin to protrude, indicating the blockage. High pressure backs up through the system and trips a switch to shut the system off. When fault is corrected, disc must be replaced and pin reset. Divider Valve Rupture Indicators w/Memory - 6,400 psi Lubriquip part number 509-499-160

$68.00

INDICATOR, MAN RESET 250 PS MJ/MSP

GG 563231

INDICATOR, MAN RESET 250 PS MJ/MSP

Reset Indicator with Memory, 250 psi (17 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-010

$26.70

Indicator, Rupture 2800 psi

GG 563229

Indicator, Rupture 2800 Psi

$117.50

INDICATOR, MAN RESET 750 PS MJ/MSP

GG 563233

INDICATOR, MAN RESET 750 PS MJ/MSP

Reset Indicator with Memory, 750 psi (52 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-030

$26.70

INDICATOR, MAN RESET 2000 PS MJ/MSP

GG 563236

INDICATOR, MAN RESET 2000 PS MJ/MSP

Reset Indicator with Memory, 2000 psi (138 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-060

$26.70

INDICATOR, MAN RESET 3500 PSI MJ/JSP

GG 563238

INDICATOR, MAN RESET 3500 PSI MJ/JSP

Reset Indicator with Memory, 3500 psi (241 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-090

$26.70

INDICATOR, MAN RESET 750 PSI MX

GG 563241

INDICATOR, MAN RESET 750 PSI MX

Reset Indicator with Memory, 750 psi (52 bar), 1/4 NPTF - MX Divider Valves Only

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-030

$42.50

INDICATOR, MAN RESET 1000 PSI MX

GG 563242

INDICATOR, MAN RESET 1000 PSI MX

Reset Indicator with Memory, 1000 psi (69 bar), 1/4 NPTF - MX Divider Valves Only

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-040

$42.50

INDICATOR, MAN RESET 1500 PSI MX

GG 563243

INDICATOR, MAN RESET 1500 PSI MX

Reset Indicator with Memory, 1500 psi (103 bar), 1/4 NPTF - MX Divider Valves Only

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-050

$42.50

INDICATOR, MAN RESET 2000 PSI MX

GG 563244

INDICATOR, MAN RESET 2000 PSI MX

Reset Indicator with Memory, 2000 psi (138 bar), 1/4 NPTF - MX Divider Valves Only

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-060

$42.50

INDICATOR, MAN RESET 2500 PSI MX

GG 563245

INDICATOR, MAN RESET 2500 PSI MX

Reset Indicator with Memory, 2500 psi (172 bar), 1/4 NPTF - MX Divider Valves Only

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-070

$42.50

INDICATOR, MANUAL RESET, O-RING, 250 PSI

GG 563252

INDICATOR, MANUAL RESET, O-RING, 250 PSI

Reset Indicator with Memory, 250 psi (17 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-590

$26.70

INDICATOR, MANUAL RESET, O-RING, 500 PSI

GG 563253

INDICATOR, MANUAL RESET, O-RING, 500 PSI

Reset Indicator with Memory, 500 psi (35 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-600

$26.70

INDICATOR, MANUAL RESET, O-RING, 750 PSI

GG 563254

INDICATOR, MANUAL RESET, O-RING, 750 PSI

Reset Indicator with Memory, 750 psi (52 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-610

$26.70

INDICATOR, NO WEEP MXP

GG 563260

INDICATOR, NO WEEP MXP

Visual Cycle Indicator Assembly - MX/MXP Divider Valves

These self-contained Magnetic Visual Cycle Indicators for MSP, MHH and USP valves are designed to allow for easy installation, while the bright orange indicator provides enhanced visual management.

For use with Trabon® MXP Divider Valves. Lubriquip part number 509-932-720

$214.00

INDICATOR, RESET 5000 PSI 1/8 NPSF

GG 563262

INDICATOR, RESET 5000 PSI 1/8 NPSF

Reset Indicator with Memory, 5000 psi (345 bar), 1/8 NPSF with O-Ring - MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-832

$27.90

INDICATOR, MANUAL RESET, O-RING, 3500 PSI

GG 563263

INDICATOR, MANUAL RESET, O-RING, 3500 PSI

Reset Indicator with Memory, 3500 psi (241 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-932-840

$27.90

SWITCH, MICRO BRKT SPDT MGO

GG 563269

SWITCH, MICRO BRKT SPDT MGO

Cycle Switch (SPDT) and Bracket Assembly - MGO Divider Valves

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

Provides positive feedback based on actual metering piston movement

Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install

Able to be set for normally open or normally closed operation

Lubriquip part number 510-250-000 Trabon part number 10250

$476.00

PLUG, INDICATOR ASSY, MGO

GG 563274

PLUG, INDICATOR ASSY, MGO

Cycle Indicator Pin Repair Kit - Indicator Body For use with Trabon® MGO Divider Valves.

Indicator Body

Lubriquip part number 510-612-001 Trabon part number 10612-1

$318.00

Block, Inlet Assembly Sae Mgo

GG 563277

Block, Inlet Assy Sae Mgo

$858.00

Block, End Assembly Mgo Sae

GG 563278

Block, End Assy Mgo Sae

$858.00

BLOCK, MSP/MHH END W/ALT INLET

GG 563279

BLOCK, MSP/MHH END W/ALT INLET

Trabon® MSP and Manzel® MHH - Bottom-Feed End Section with Port Plug For use with Trabon® MSP and Manzel® MHH Divider Valves. Install a Leak-Proof Zerk fitting to complete the assembly. End Section with Alternate Inlet Port Plug Must be ordered in multiples of 5 Compatible Zerk fittings 556429 (90 deg) and 555888 (straight). Lubriquip part number 510-770-332

$85.00

Indicator, ind

GG 563288

Indicator, Ind

$191.00

SWITCH, BLOWOUT / SW

GG 563292

SWITCH, BLOWOUT / SW

Lubriquip part number 511-573-030

$356.00

MODU-FLO PUMP, ASSY, HLJ-5

GG 563305

MODU-FLO PUMP, ASSY, HLJ-5

Modu-Flo® HLJ-5 Hydraulic Pump

The Modu-Flo system is ideal for applications where minimizing downtime is critical. Customizing is easy–just mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

Modular system design allows configurations to work in all applications Easy to standardize on components and reduce inventory Adjustable pump output for fast, convenient customization Lubriquip part number 521-000-011

$984.00

VALVE, SOL MODULAR 120 VAC

GG 563312

VALVE, SOL MODULAR 120 VAC

Modu-Flo and E-Series Pumps Spare Parts and Accessories - Replacement solenoid valve for 563315 For use with Modu-Flo and E-Series Pneumatic Pumps.

Replacement solenoid valve for 563315

Lubriquip part number 521-000-540

$427.00

Manifold, Resv Pump NPT

GG 563314

Manifold, Resv Pump Npt

$215.50

KIT, ACCESSORY, L/L, 20 PT

GG 563317

KIT, ACCESSORY, L/L, 20 PT

Modu-Flo Low Level Switch Assemblies - 15 Amp Low Level Switch for 20 pt. Cylindrical Oil Reservoirs, SPDT

15 amp Low Level Switch for 20 pt Cylindrical Oil Reservoirs, SPDT

Lubriquip part number 521-001-040

$377.00

RESERVOIR, TANK 24PT T2

GG 563320

RESERVOIR, TANK 24PT T2

24 pt. (11.36 liter) Rectangular Oil Reservoir - Metal For use with Modu-Flo and E-Series Pumps. 24 pt (11.36 liter) Rectangular - Metal Lubriquip part number 521-001-070

$1,165.00

RESERVOIR, TANK 40PT T3

GG 563321

RESERVOIR, TANK 40PT T3

40 pt. (18.93 liter) Rectangular Oil Reservoir - Metal For use with Modu-Flo and E-Series Pumps. 40 pt (18.93 liter) Rectangular - Metal Lubriquip part number 521-001-080

$1,415.00

MANIFOLD, ASSY WALL MOUNT

GG 563323

MANIFOLD, ASSY WALL MOUNT

Remote Pump Manifold (NPT) with Outlet Check Valve for Modu-Flo Pumps, System Fill Check Valve, Blowout Assembly For use with Modu-Flo Pumps. Remote Pump Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Blowout Assembly Lubriquip part number 521-001-170

$417.00

SWITCH, SW BLOWOUT HI PRESS P2

GG 563325

SWITCH, SW BLOWOUT HI PRESS P2

High Pressure Blowout Switch for 5 pt. or 5 lb. Reservoirs For use with Modu-Flo Pneumatic Pumps.

High Pressure Blowout Switch for 5 pt or 5 lb Reservoirs

Lubriquip part number 521-001-190

$648.00

SWITCH, SW HI PRESS

GG 563328

SWITCH, SW HI PRESS

High Pressure Switch for all Reservoirs

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment.

Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly

LED lights visually display pressure switch functions

Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers

Moisture resistant and factory set to ensure accuracy for long life and reliability

Sends an alarm signal to alert either a high or low pressure condition

Available for hydraulic pressures from 10 to 4700 psi

1/4 in NPT thread allows quick connection to injector systems

Lubriquip part number 521-001-220

$715.00

Manifold, Assembly Resv To Pump

GG 563329

Manifold, Assy Resv To Pump

$252.50

MANIFOLD, ASSY WALL MNT

GG 563330

MANIFOLD, ASSY WALL MNT

Remote Pump Manifold (NPT) with Outlet Check Valve for Modu-Flo Pumps, System Fill Check Valve, Tubed Blowout Assembly For use with Modu-Flo Pumps. Remote Pump Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Tubed Blowout Assembly Lubriquip part number 521-001-780

$445.00

MANIFOLD, ASSY RESV TO PUMP

GG 563331

MANIFOLD, ASSY RESV TO PUMP

Pump-to-Reservoir Manifold for Modu-Flo Pumps, NPT, Dry Gauge, Fill Check, Outlet Check, Tubed Blowout For use with Modu-Flo Pumps. Pump/Reservoir Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Tubed Blowout Assembly, 0-3,000 psi Pressure Gauge Lubriquip part number 521-001-790

$389.00

MANIFOLD, ASSY RESV TO PUMP

GG 563333

MANIFOLD, ASSY RESV TO PUMP

Pump-to-Reservoir Manifold for Modu-Flo Pumps, NPT, Liquid Filled Gauge, Fill Check, Outlet Check, Blowout For use with Modu-Flo Pumps.

Pump-to-reservoir manifold, NPT, liquid filled gauge, fill check, outlet check, blowout

Lubriquip part number 521-002-140

$555.00

Indicator, Level Assembly 5Lb

GG 563334

Indicator, Level Assy 5Lb

$145.00

MANIFOLD, ASSY LESS G

GG 563336

MANIFOLD, ASSY LESS G

Baseplate Manifold Kit for Modu-Flo Pumps, NPSF (NPT), Reservoir Mount, Outlet/Fill Check Valves, Tubed Blowout

Baseplate Manifold Kits - NPSF (NPT), Reservoir Mount, Outlet Check Valve, System Fill Check Valve, Tubed 1450 psi Blowout Assembly

Lubriquip part number 521-003-920

$407.00

Body, Indicator, Level, 6 Lb

GG 563338

Body, Indicator, Level, 6 Lb

$145.00

TIMER, ASSY SOLID STATE TANK

GG 563339

TIMER, ASSY SOLID STATE TANK

Solid State AC Timer for all Tanks For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for all Tanks

Lubriquip part number 521-004-500

$885.00

TIMER, ASSY SOLID STATE 5 LB

GG 563340

TIMER, ASSY SOLID STATE 5 LB

Solid State AC Timer for 5 pt. and 5 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 5 pt and 5 lb Cylindrical Reservoirs

Lubriquip part number 521-004-510

$885.00

TIMER, ASSY SOLID STATE 12 LB

GG 563341

TIMER, ASSY SOLID STATE 12 LB

Solid State AC Timer for 6, 12 and 20 pt., 6, 12 and 20 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 6, 12 and 20 pt, 6, 12 and 20 lb Cylindrical Reservoirs

Lubriquip part number 521-004-520

$885.00

Modu-Flo Pump, Assembly, Hi, Hlj-5X

GG 563345

MODU-FLO PUMP, ASSY, HI, HLJ-5X

Graco 563345 Modu-FloÂ® HLJ-5X Hydraulic Pump

The Modu-Flo system is ideal for applications where minimizing downtime is critical. Customizing is easyâ€“just mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

Modular system design allows configurations to work in all applications
Easy to standardize on components and reduce inventory
Adjustable pump output for fast, convenient customization

Model: Modu-Flo
Series: HLJ-5X

Application: In-Plant Machinery

Compatible Material: Oil, Grease
Compatible Metering Device: Series Progressive

Maximum Cycle Rate (CPM): 50

Maximum Fluid Output Pressure (bar): 207
Maximum Fluid Output Pressure (psi): 3000

Maximum NLGI Grade: #2

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20680
Maximum Working Pressure (MPa): 45.5
Maximum Working Pressure (psi): 3000

Power Type: Hydraulic

$1,610.00

VALVE, SOL HIRSHMANN CONN 24VDC

GG 563349

VALVE, SOL HIRSHMANN CONN 24VDC

Modu-Flo and E-Pump Spare Parts and Accessories - 24 VDC, 2-position, 3-way Pneumatic Solenoid Valve, Hirschman connection For use with Modu-Flo and E-Series Pneumatic Pumps.

24 VDC, 2-position, 3-way pneumatic solenoid valve, with Hirschman connection

Lubriquip part number 521-007-740

$361.00

Modu-Flo Pump, Assembly, Fixed, Al-5

GG 563353

Modu-Flo Pump, Assy, Fixed, Al-5

$965.00

Manifold, Res To Pump (Bspp)

GG 563357

Manifold, Res To Pump (Bspp)

$1,345.00

Reservoir, E-Series Oil 4Pt

GG 563359

Reservoir, E-Series Oil 4Pt

$443.00

E-Series Pump, Resv Assembly Oil

GG 563361

E-Series Pump, Resv Assy Oil

$1,005.00

E-SERIES PUMP, RESV ASSY GRS

GG 563363

E-SERIES PUMP, RESV ASSY GRS

E-Series™ Pump with 6 lb. (2.72 kg) Plastic Cylindrical Grease Reservoir with 2350 psi (162 bar) Rupture Disc

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

Easy field installation of accessories without disturbing existing plumbing Smart pump design with few moving parts ensures long-lasting dependability Lubriquip part number 521-300-660

$1,300.00

E-SERIES PUMP, RESV GRS 3LB

GG 563365

E-SERIES PUMP, RESV GRS 3LB

E-Series™ Pump with 3 lb. (1.36 kg) Plastic Cylindrical Grease Reservoir, Low Level Switch, Pressure Gauge

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

Easy field installation of accessories without disturbing existing plumbing Smart pump design with few moving parts ensures long-lasting dependability Lubriquip part number 521-300-921

$2,220.00

E-SERIES PUMP, RELIEF VLV GAGE

GG 563366

E-SERIES PUMP, RELIEF VLV GAGE

E-Series™ Pump Assembly with Relief Valve

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

Easy field installation of accessories without disturbing existing plumbing Smart pump design with few moving parts ensures long-lasting dependability Lubriquip part number 521-300-930

$535.00

E-Series Pump, Assembly Adj

GG 563367

E-Series Pump, Assy Adj

$596.00

E-Series Pump, Resv Adj 4Lb

GG 563368

E-Series Pump, Resv Adj 4Lb

$1,240.00

E-Series Pump, Resv Assembly

GG 563369

E-SERIES PUMP, RESV ASSY

Graco 563369 E-Series Pump and Reservoir Assembly - 6 lb. (2.72 kg) Plastic Grease, 1/4 in. NPSF

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

Easy field installation of accessories without disturbing existing plumbing
Smart pump design with few moving parts ensures long-lasting dependability
Lubriquip part number 521-301-035

Model: E-Series

Application: In-Plant Machinery

Compatible Material: Grease

Maximum Working Pressure (bar): 137.9
Maximum Working Pressure (kPa): 13790
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000

Power Type: Pneumatic

$1,830.00

E-Series Pump, Resv Adj Grs

GG 563370

E-Series Pump, Resv Adj Grs

$1,155.00

E-Series Pump, 1/4 Npsf Ports

GG 563371

E-Series Pump, 1/4 Npsf Ports

Call for pricing

Link, Linkage

GG 563373

Link, Linkage

$18.50

MAXI-FLO PUMP, LOW PRESS

GG 563374

MAXI-FLO PUMP, LOW PRESS

Replacement Maxi-Flo™ Pump

Compact design with everything you need to get your single line resistive oil lubrication system installed and running quickly. A standard package comes complete with reservoir, pump, gear motor, and choice of internal or remote control. Simple slide switches allow for easy setup of pump run cycle time. Bright LED indicators for low level and power allow for easy troubleshooting and verification.

Integrated control with manual run button for easy setup

Compact design fits anywhere

500 psi (34 bar) rating for using with various orifice metering devices

Lubriquip part number 521-500-220

$311.00

Valve, Relief, 1/8 NPT, 600 psi

GG 563375

Valve, Relief, 1/8 Npt, 600 Psi

$47.70

SWITCH, SW HI PRESS BLOWOUT 1450

GG 563384

SWITCH, SW HI PRESS BLOWOUT 1450

High-Pressure Blowout Switch, 1,450 psi - Oil

High-Pressure Blowout Switch, 1,450 psi (100 bar), Oil

Lubriquip part number 521-700-390

$584.00

SWITCH, SW HI PRESS BLOWOUT 2350

GG 563385

SWITCH, SW HI PRESS BLOWOUT 2350

High-Pressure Blowout Switch, 2,350 psi - Grease

High-Pressure Blowout Switch, 2,350 psi (162 bar), Grease

Lubriquip part number 521-700-400

$584.00

Base, Wall Mtg 10:1

GG 563386

Base, Wall Mtg 10:1

$2,090.00

BASE, WALL MTG 60:1

GG 563387

BASE, WALL MTG 60:1

Wall-Mounting base for Lube Master® Electric Pumps - 60:1 Reduction For use with Lube Master® Pump Packages.

Wall-Mounting Base with 60:1 Drive Reduction

Lubriquip part number 521-700-530

$2,090.00

BASE, FLOOR MTG 10:1

GG 563388

BASE, FLOOR MTG 10:1

Floor-Mounting base for Lube Master® Electric Pumps - 10:1 Reduction For use with Lube Master® Pump Packages.

Floor-Mounting Base with 10:1 Drive Reduction

Lubriquip part number 521-700-550

$2,190.00

BASE, FLOOR MTG 60:1

GG 563389

BASE, FLOOR MTG 60:1

Floor-Mounting base for Lube Master® Electric Pumps - 60:1 Reduction For use with Lube Master® Pump Packages.

Floor-Mounting Base with 60:1 Drive Reduction

Lubriquip part number 521-700-560

$2,190.00

BLOCK, INLET, MSP/MHH, NPSF

GG 563421

BLOCK, INLET, MSP/MHH, NPSF

Manzel® MHH Divider Valve - Inlet - NPSF, Bleed Ports For use with Trabon® MSP/MHH Divider Valves. Standard Inlet NPSF, bleed ports Lubriquip part number 527-000-322

$52.50

BLOCK, INLET, MSP/MHH SAE W/BLEED

GG 563422

BLOCK, INLET, MSP/MHH SAE W/BLEED

Manzel® MHH Divider Valve - Inlet - SAE, Bleed Ports For use with Trabon® MSP/MHH Divider Valves. Standard Inlet SAE, bleed ports Lubriquip part number 527-000-325

$98.25

BLOCK, BASE, MSP/MHH, BSPP

GG 563447

BLOCK, BASE, MSP/MHH, BSPP

Trabon® MSP Divider Valve - Intermediate Base Plate - 1/8-28 BSPP For use with Trabon® MSP/MHH Divider Valves. Intermediate base plate BSPP Lubriquip part number 527-003-140

$31.30

BLOCK, BASE, MSP/MHH, SAE

GG 563451

BLOCK, BASE, MSP/MHH, SAE

Trabon® MSP Divider Valve - Intermediate Base Plate - 7/16-20 SAE-ORB For use with Trabon® MSP/MHH Divider Valves. Intermediate base plate SAE Lubriquip part number 527-003-550

$44.60

Valve, Shunt Pnuematic Msp

GG 563456

Valve, Shunt Pnuematic Msp

$1,135.00

MANIFOLD ADAPTOR ASSY MSP

GG 563461

MANIFOLD ADAPTOR ASSY MSP

Trabon® MSP Modular Specialty Inlets - Remote Mount Manifold Kit, NPSF For use with Trabon® MSP Modular Specialty Inlets.

Remote Mount Manifold Kit

NPSF

Includes outlet manifold, O-ring and 2 mounting screws

Lubriquip part number 527-004-360

$270.50