GRACO INC. S10595

GG 16P858

GG 16N406

GG 25B451

GG 233748

GG FA3111

GG P15LSB

GG 11055

GG 2001029

GG 24E715

GG 24A267

GG 107203

GG 255872

GG LTX633

RAC X LTX TIP, SPRAY, (633)

Graco LTX633 RAC X SwitchTip, 633

The Reverse-A-Clean (RAC) 633 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market
  • Longest lasting fan pattern
  • Highest quality finish with a consistent spray pattern
• Easy to Identify Tip Size
  • Large raised tip size numbers are always legible - even when covered with paint
• Superior Tip Design
  • Locking tab ensures tip stays securely in guard
  • Snaps tip in spray or reverse position
  • OneSeal tip gasket installs with no tools
  • Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.17
• Maximum Flow Rate (L/min): 4.43

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.033

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX835

RAC X LTX TIP, SPRAY, (835)

Graco LTX835 RAC X SwitchTip, 835

The Reverse-A-Clean (RAC) 835 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market
  • Longest lasting fan pattern
  • Highest quality finish with a consistent spray pattern
• Easy to Identify Tip Size
  • Large raised tip size numbers are always legible - even when covered with paint
• Superior Tip Design
  • Locking tab ensures tip stays securely in guard
  • Snaps tip in spray or reverse position
  • OneSeal tip gasket installs with no tools
  • Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 1.31
• Maximum Flow Rate (L/min): 4.96

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.035

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 244825

GG 102040

GG 102310

GG 102861

GG 102915

GG 104391

GG 106166

GG 107228

GG 107536

GG 256774

GG 256775

GG SP4F.0004

SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-POEP21

Graco SP4F.0004 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms

Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.

• 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
• Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
• Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
• PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
• 316L stainless steel wetted section
• All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
• Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
• Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design

• Model: SaniForce
• Series: 4150 HS

• Air Exhaust Port Size (in): 3/4
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Sanitary

• Ball Material: 316 Stainless Steel Flapper

• Center Section Material: Stainless Steel

• Compatible Material: Edible Oil, Food, Personal Care

• Compressor Required: Yes
• Connection Type: Tri-Clamp

• Diaphragm Material: PTFE/EPDM Overmold

• Fluid Section Material: 316L Stainless Steel

• For Use With: Food, Personal Care

• Hazardous Location Approval: ATEX, IECEx

• Manifold Configuration: Center Port
• Manifold O-Ring Material: EPDM
• Material: Stainless Steel
• Material Certification: EN 1024:2004 Type 2.1 (Standard)

• Maximum Air Consumption (SCFM): 235
• Maximum Air Pressure (bar): 8

• Maximum Air Pressure (kPa): 800
• Maximum Air Pressure (MPa): 0.8
• Maximum Air Pressure (psi): 120

• Maximum Cycle Rate (CPM): 225

• Maximum Flow Rate (GPM): 90
• Maximum Flow Rate (L/min): 340

• Maximum Fluid Operating Temperature ( degree C): 82
• Maximum Fluid Operating Temperature ( degree F): 180
• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Fluid Operating Temperature ( degree C): 82
• Maximum Fluid Operating Temperature ( degree F): 180
• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Flui

GG 103927

GG 112077

GG 113082

GG 15E022

GG 168692

GG 16E067

GG 195788

GG 246972

GG 24A622

GG 24U117

GG 256467

GG 256468

GG 25E140

GG 262728

GG 96/0033/99

GG 96/0119/99

GG GC2241

GG H42510

GG H43825

GG H52503

GG H55025

GG H75003

GG H75010

GG H75050

GG H45025

GG 208391

GG 218034

GG 240131

GG 244035

GG 24A268

GG 24N291

GG 26A303

GG 557617

GG 0897M-HP

GG 120398

GG 164722

GG 16U447

GG 16U738

GG 17E464

GG 17L895

GG 24R217

GG 24R238

GG 24Z194

GG 25A100

GG 25A105

GG 25C224

GG 25M495

GG 287220

GG 605837

GG 902979

GG B200KM

GG B240K

GG C36082

GG G24B10

GG G24B18

GG GC2583

GG M0587001

GG SA921-G

GG SA932-G

GG SG263002

GG SG263007

GG SK505

GG SM370-24

GG SN712001

GG SP433008

GG ST802003