GRACO INC. S10595

GG 256775

GG SP4F.0004

SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-POEP21

Graco SP4F.0004 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms

Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.

• 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
• Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
• Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
• PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
• 316L stainless steel wetted section
• All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
• Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
• Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design

• Model: SaniForce
• Series: 4150 HS

• Air Exhaust Port Size (in): 3/4
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Sanitary

• Ball Material: 316 Stainless Steel Flapper

• Center Section Material: Stainless Steel

• Compatible Material: Edible Oil, Food, Personal Care

• Compressor Required: Yes
• Connection Type: Tri-Clamp

• Diaphragm Material: PTFE/EPDM Overmold

• Fluid Section Material: 316L Stainless Steel

• For Use With: Food, Personal Care

• Hazardous Location Approval: ATEX, IECEx

• Manifold Configuration: Center Port
• Manifold O-Ring Material: EPDM
• Material: Stainless Steel
• Material Certification: EN 1024:2004 Type 2.1 (Standard)

• Maximum Air Consumption (SCFM): 235
• Maximum Air Pressure (bar): 8

• Maximum Air Pressure (kPa): 800
• Maximum Air Pressure (MPa): 0.8
• Maximum Air Pressure (psi): 120

• Maximum Cycle Rate (CPM): 225

• Maximum Flow Rate (GPM): 90
• Maximum Flow Rate (L/min): 340

• Maximum Fluid Operating Temperature ( degree C): 82
• Maximum Fluid Operating Temperature ( degree F): 180
• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Fluid Operating Temperature ( degree C): 82
• Maximum Fluid Operating Temperature ( degree F): 180
• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Flui

GG 103927

GG 112077

GG 113082

GG 15E022

GG 168692

GG 16E067

GG 195788

GG 246972

GG 24A622

GG 24U117

GG 256467

GG 256468

GG 25E140

GG 262728

GG 96/0033/99

GG 96/0119/99

GG GC2241

GG H42510

GG H43825

GG H52503

GG H55025

GG H75003

GG H75010

GG H75050

GG H45025

GG 208391

GG 218034

GG 240131

GG 244035

GG 24A268

GG 24N291

GG 26A303

GG 557617

GG H53806

GG 2009106

GG 2007062

GG 2007055

GG 246293

KIT, REPAIR, TUBE BEAR

KIT INCLUDES: COUPLER, ORBITER [QTY. 1], PACKING, O-RING [QTY. 1], TUBE, FLUID [QTY. 1], GUARD, COUPLER, SEALANT [QTY. 1]

GG 24V007

GG 17E855

GG 25A692

GG 125883

GG 130012

GG 130111

GG 132773

GG 156641

GG 15A009

GG 15A026

GG 15A178

GG 15A238

GG 15B729

GG 15B827

GG 15C514

GG 15C571

GG 15F656

GG 15G377

GG 15J464

GG 15J586

GG 15M672

GG 15R347

GG 15T071

GG 15T072

GG 15T630

GG 15V778

GG 160940

GG 16D531

GG 16M712

GG 16M719

GG 16R033

13:1 Ration External Mix Gel System with 35ft(10.7m) Hose

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

• Adjustable ratio catalyst pump - no tools are required for a quick and easy ratio change. Precision engineered linkage offers you superior ratio control and consistent cure.

• Easy maintenance - fewer repair parts. Long lasting seals mean less downtime. Pumps last longer between planned maintenances. No surge bottle necessary, less parts, solvent and resin needed to prime the pump.

• Monitors resin usage - Helps ensure product quality by tracking resin usage per piece, shift or day. Tracks cycles for preventive maintenance schedule. Displays real time flow rate - eliminates material waste due to worn spray tips.

• Keeps the catalyst pump primed for consistent delivery.

• Truly engineered linkage for superior ratio control. Allows for infinite adjustment of catalyst percentage. No tools required ensures proper catalyst percentage and optimum results. Variance of 1% or less.

• Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern. Shortened stroke on pump for better spray pattern.

• Easy user interface with all gauges in one location.

GG 176537

GG 17E419

GG 17G072

GG 17K719

GG 17S640

GG 17V342

GG 17V957

GG 184044

GG 189977

GG 190497

GG 192441

GG 2000293

GG 2000506

GG 2000511

GG 2000517

GG 207241

GG 215240

GG 215407

GG 239731

FIREBALL 425 PUMP, 75:1, 35 LB

Graco 239731 Fire-Ball 425 Series 75:1 35 lb (16 kg). Container Pail Length Grease Pump

The Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.

• Durable - Thick cast aluminum air motor housing offers unmatched durability.
• Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.
• Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated " dirty" air environments for long life without repair.
• Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

• Model: Fire-Ball
• Series: 425

• Air Inlet Size (in): 0.5
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Air Motor Effective Diameter (in): 4.25

• Application: Industrial

• Compatible Material: Grease

• Cycles Per Gallon: 165

• Fluid Inlet Type: Slotted

• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• For Use With: Grease

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 0.33
• Maximum Flow Rate (L/min): 1.25

• Maximum Intermittent Cycle Rate (CPM): 60

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 51.7
• Maximum Working Pressure (psi): 7500

• Power Type: Pneumatic

• Pump Ratio: 75:1

GG 241162

GG 244675

GG 245860

GG 245861

GG 246619

GG 24A446

GG 24A579

GG 24A649

GG 24B666

GG 24B820